SearchIndex.FindByIP () for VM with multiple NICs for

Similar Questions

• Tolerance of failure with multiple NICs

  Apologize if this has been asked before.

  I'll put up a vSphere 5.5 environment and I have NIC 1 GB for each host to devote two NICs per host for tolerance to failures.  I was wondering the best way to set this up to their maximum output.  I have implemented as a Multi - NIC Vmotion?  As noted here: VMware KB: Multiple-NIC in vSphere vMotion 5. Essentially using two groups of ports as FT-1 and FT-2.  Or what I need to do as a Multi-NIC iSCSI with separate vswitches and each vswitch with a Port Group.

  Thanks in advance.

  You run into a problem of flow when you use 1 NIC for FT?

  Currently FT only supports using a single network adapter (1 G or 10 G)

• Increase throughput for iSCSI with multiple NICs

  I'm implementing a new host ESXi 6 using a Synology NAS as an iSCSI target. I have 4 nic of the Synology stuck in 1 connection, so it has 4 GB of throughput. So far, over my hosting provider, I have two nic I dedicated to iSCSI traffic. So far, I put vSwitch under 1 two NICs and I was playing with patterns. I put two 1 vmkernel network cards and set as active adapters. However when I watch the iSCSI network traffic I only see traffic on a network adapter. This of course caps my speed to 1 GB. I would like to be able to bind several network cards so I can get a flow more. I tried changing the selection of the path for the warehouses of data in Round Robin are therefore at least two active nic. But which always leaves me with two individual connections of 1 GB instead of 2 GB connection. Is it possible for me to get there or I'm better off just having several 1 GB NIC load balanced?

  I'm not familiar with the Synology. However, what is generally - in the case where the storage system supports - is to set up several uplinks on the side of the target of storage/as well as on the initiator/ESXi side, each with their own IP address. Once configured, you can use multiple paths to access the target. According to the capabilities of the target, Round-Robin (if supported) will send traffic through all the links, i.e. using the bandwidth of all the links.

  André

• VDI connect to the virtual computer with multiple NICs, use wrong address

  Strange question, we are the double of a VM to autoguiding.  Each NIC is on a different network, and it works very well.  Except when you sign out of the VM with a zero client.  If both network adapters is enabled through the vsphere, zero client the client tries to connect to the virtual machine using a wrong address.  He will try to use the address 172.16.x.x, but the life of the virtual machine and is stored on 192.168.x.x network.  Is there a way to make the NETWORK on 192.168.x.x address network card that zero the client tries to connect?

  Using the network-> Advanced-> advanced-> tab connections maps and links, move the 192.168.x.x network adapter to the top of the list of connections.

  Linjo

• Problems with multiple monitors for critical update Windows 7

  Since the update critical October 1, I can no longer run multiple monitors.

  According to the record, this update made changes at the same time the driver for my AMD Radeon 7470 and Dell monitor 1.1 card, and I've updated the software.

  Devices for work and when I pass cables or remove cables. Yet they are simply not recognized as connected.

  Hello Kent,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted or incorrect display settings.

  I suggest you run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Please also read this article and check.
  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• I have CC with multiple desktop applications; My wife has CC for Photoshop only. We all have both need to use Acrobat DC...

  I have CC with multiple desktop applications; My wife has CC for Photoshop only. We all have both need to use Acrobat DC, which is already enabled on my computer. She comes to install Acrobat DC on his computer via the creative Cloud, but he identifies himself as a trial. How his installation of Acrobat are activated under my account (as the second of two authorized activations)?

  How his installation of Acrobat are activated under my account (as the second of two authorized activations)?

  Two activations by Adobe ID are allowed provided that they are used by the same person and only is in use at any time.

  It can be used simultaneously by two different people.

  DC Acrobat is installed as a trial on your wife's computer, because it is signed with his Adobe ID and there is no active subscription for Acrobat DC under its identifier.

  Your wife will need to subscribe separately the Acrobat DC plan only App or plan all the Apps.

• I can't pay for my photoplans with multiple cards.

  I can't pay for my photoplans with multiple cards.

  Hello

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• Strategy for the SSO with multiple vCenter servers.

  We are upgrading vSphere/SRM 5.0U1 for vSphere/SRM 5.5U1 with multiple vCenters in our environment. After reading 2058239 KB:

  VMware KB: installing vCenter Single Sign-On 5.5 on a Microsoft Windows platform

  We install SSO on a separate Windows Server and choose vCenter Single Sign-On for your first server vCenter Server for this first instance. Now my question is for the following facilities as the vCenter for MRS or vCenters which manages areas replacement fault which option, existing site or new, do we choose? Thank you

  
  

  You have therefore three sites.

  The first time, you will choose vCenter Single Sign-On for your first server vCenter Server.

  For the second one on the same site, you choose existing vCenter Single Sign-On for an additional vCenter Server in a site.

  Now, when you come to an another site vCenter and third, you will need to decide if you have a site that is your main or you want to still have a site on the second.

  If you decide to join at the elementary level, that you will yet choose existing vCenter Single Sign-On for an additional vCenter Server in a site.

  If you choose to have another site, you choose vCentre of Single Sign-On for an additional vCenter Server with a new site.

  The end of it, you will have to make the decision to design. I can only tell you what they mean. Make sure you have adequate connectivity between sites.

• Network of twinning with Port trunks to support the host ESX VShere 4 with several NIC for load balancing across a HP ProCurve 2810 - 24 G

  We are trying to increase production of our ESX host.

  ESX4 with 6 NIC connected to HP Procurve 2810 - 24G 2 ports; 4; 6; 8; 10 and 12.

  The

  grouping of parameters on ESX is rather easy to activate, however, we do not know

  How to configure the HP switch to support above connections.

  Pourrait

  someone please help with a few examples on how to seup the HP switch.

  Help will be greatly appreciated as we continue to lose tru RDP sessions

  disconnects.

  Best regards, Hendrik

  Disabling protocols spanning-tree on the Procurve ports connected to the ESX host is going to promote a recovery more rapid port. Similarly, running global spanning tree is not recommended if you mix some VLAN iSCSI and data in the same fabric (i.. e. you do not want a STP process to hang storage IO). Spanning tree on your switches, look PVST (or Procurve BPMH) to isolate the STP VLANs unique events.

  In regard to the load balancing is, by default (route based port ID) value algorithm requires less overhead on the ESX hosts.  You may not use LACP on the Provurve the lack of facilities LACP ESX. You must use "route based on the IP hash" sideways ESX and 'static trunks' on the side of Procurve. Unless you have specific reasons why your network need loads this configuration, I'd caution against it for the following reasons:

  (1) IP hash requires thorough inspection of packages by the ESX host, increasing CPU load as load package increases;

  (2) the static configuration puts switch physics rigid and critical ESX host port mapping. Similarly, groups of ports all will fail as the Procurve batteries for management only and won't be on switches 802.3ad circuits Group (i.e. all ports of a group of circuits must be linked to a single switch) - this isn't a limitation of the port ID routing;

  (3) K.I.S.S. love port ID mix of port ID, beacon probe and failover on the port assignments you will get segregation of the raw traffic without sacrificing redundancy - even through switches.

  I hope this helps!

  -Collin C. MacMillan

  SOLORI - Oriented Solution, LLC

  http://blog.Solori.NET

  If you find this information useful, please give points to "correct" or "useful".

• Advanced answer Options for multiple choice with multiple answers questions

  Is there a work around to provide feedback to questions multiple choice with multiple responses?

  For example, I am preparing a question with four ansers, B and D are correct. If users chooses only B, then the feedback will be "B is OK, but there is a right answer."

  Hello

  Burst in to give you a link to a post Articles with some articles that I have published on the creation of custom questions. If you do not have to report to an LMS, which will be the way to go to be in total control. You will find perhaps inspiration here:

  Customize your quiz

  I find also included widgets very useful for creating custom question slides. Here is another link:

  Widgets and custom questions - source list

  Lilybiri

• To create a ToolTip text for the image with multiple image map links

  Hello
  
  RH6 using, that I imported a picture into a topic. For the images that I have created several maps image to post a link to other topics. However, I can't create a map image additional to that same image that includes only the screen Tip text. I get a message of invalid value: "Please select a file, bookmark or topic to bind the hyperlink to.»
  
  Is there a way to create a popup only the text of an image with multiple image map links? My final output will be to WebHelp but possibly migrate FlashHelp in the near future.
  
  Thank you
  
  FMnRH
  
  
  
  Thank you
  FMnRH

  If the image is at the beginning of the subject, or all alone in a reference topic, you can put "#" (without the quotes) as the link for each area reactive.

  If the image is larger than the viewing window, it can jump to the top, but only if the user clicks on the link.

  I tried wz_tooltips and like it. I agree with Leon, it will take time for the first image but maybe go faster later.

  Harvey

• El Capitan permissions bad for lib with multiple users

  On my Mac with multiple users and running El Capitan, I encountered a problem with an application (GoGlobal) failed to start with "errno = 13", which is a problem of permissions with usr/local/lib /.

  I determined that on Yosemite, usr/local/lib was owned by root and permissions: drwxr-xr-x. However, on El Capitan, usr/local/usr / local / lib lib is owned by one of the nicks (random?) and has permissions drwx-, which is the source of the errno = 13.

  I got around the problem by chmod 755 to lib /, but I fear that a future update will reset these permissions impassable previous values. Please correct these settings in install and update routines.

  GoGlobal isn't a request to Apple. You can send your message to the developer, who develops not only the Application itself, but the installation script that puts in place of its components.

• Best use of multiple NICS (collaborate with VIRTUAL networks or physcially separated)

  Set up my new production environment vSphere and trying to figure out the best way to set up the network.  I have pictures to illustrate, but the basic question is:

  1. use all NICS in a pool and VLANS to separate traffic - or -

  2 devote some physical nic to only certain things (VMotion, FT etc..)

  We use Dell R710 2 servers with 6 NIC of each.

  Our SAN is connected via zFCP iSCSI, see you in the group is therefore only for failover of emergency if environmental FC had to leave for some reason any.

  Please let me know which design you think would be the best.

  Thank you

  Michael

  Hello

  Everyone says to separate the service of the VMnetwork console.  If I can separate the traffic of service with one console vlan why separate physically?  If something happens to the service console connection disconnects but my machines always communicate then I would have trouble.  Why not make sure that if the network paths are for machines that I can control the server VM?

  Your VMNetwork is one of network environments more hostile within the vNetwork as its arbitrariness and a point of attack if someone breaks into a virtual machine. If you have the virtualization management network attached to your VMNetwork is on, there is a VERY good chance that the pirate VM now will be used to launch an attack against the network of virtualization management. Given the current set of attacks there is a VERY good chance of success. For security reasons, you want your management network virtualization to be separated and protected by a firewall of any other physical and virtual network. Ideally on its own switches with output physical switch VLAN in use. However if you use VLAN physical switch then you put your trust in these spending patterns, so you want to increase your monitoring of these switches.

  Since the original post, I combined the iSCSI traffic because it is a failover of emergency only where my zFCP hardware has a problem.  The iSCSI link rarely go to never get used and I didn't spend 2 physical network cards to something that would almost never be used.

  You want to spend 2 links for iSCSI, if you still do not have a failover, you can the bandwidth and redundancy. Consider all the links of storage redundancy.

  Let me know what you think on the service console.

  When you use VLANS in the vNetwork you are automatically protected against most known layer 2 attacks, but in the pNetwork you are confident that your switch configurations you will protect. These configurations have been known to change and not necessarily for the better. Some say, it must break so for that to happen, but 1 problem of configuration and your SC is now attacked. Remember, once the virtualization management networks can be attacked they can probably be broken. I know a pen-Tester, which can do that in a very short time, and they will have your virtual environment.

  Protect the machine from service/management console, Client vSphere, vCenter servers as if they were gold, access to them implies access to almost everything. That's why VMware strongly recommends that you create another network of virtualization management a firewall of all systems on your system. That within this firewall that place you jump machines that run all vSphere SDK and vSphere client and that you use something like RDP to access these tools without their execution through your firewall. Make this thing increases the security of your global virtual environment of giant protecting your investment in the current batch of management network attacks. VLANs are not a security tool, they are a tool of separation of network based on the pNetwork is correctly configured, maintained and checked. VLAN security is based on the confidence in your pSwitches not something that is authoritative.

  Best regards
  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, 2010

  Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere (TM) and Virtual Infrastructure Security' [/ URL]

  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]

  Blogs: url = http://www.virtualizationpractice.comvirtualization practice [/ URL] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://itknowledgeexchange.techtarget.com/virtualization-pro/ TechTarget [url] | URL = http://www.networkworld.com/community/haletky Global network [url]

  Podcast: url = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcastvirtualization security Table round Podcast [url] | Twitter: url = http://www.twitter.com/TexiwillTexiwll [/ URL]

• How can I actually talk to support multiple issues with multiple devices (software, hardware, account of the question?

  How can I actually speak to technical support issues to nulitple with multiple devices (software, hardware, account problems,) I have a touch screen of hp with windows 7 Home, Ipod, home router wireless, boost, WiFi, wii, etc.... Problems with windows live net Passport vs msn Id, problems with zune vs itunes and windows media that nobody wants play nice together.

  My touchscreen notes will use only a google account, music another program, and of course until recently google was not an option on the windows phone. of course if I'm going now that I'll lose all the games and music. His tent so frustrating of any help, that nobody seems to know how often these devices and programs interact (or care) HP has been of little use, even for my provider windows, microsoft, living cells and zune etc...

  All the changes that took place this last month will help but gets boring. I consider myself pretty computer savy, but maybe not, should not this difficult. I realized about a year ago I would have hired a technician but it seems immpossible to find someone who knows enough about all of the equipment and software to really do some good. My Hp touchscreen computer does not even play nice with their own HP printers. I really regret the time and money I spent. I could every Mac.

  All of the suggestions. Even your options do not address several problems of interaction with the hardware and software all needs of problems to adapt to a single category.

  Hello

  
  To correct the software issues run the methods mentioned below.
   
  Method 1: run the troubleshooter and check if the problem is resolved.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter
  
  Method 2 : run a SFC (System File Checker) scan and see if the problem occurs.
  http://support.Microsoft.com/kb/929833
  
  Method 3 : run Clean boot and check if the problem persists.

  
  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  
  Note: follow step 7 to reset the computer to start as usual after the boot process.
  http://support.Microsoft.com/kb/929135

  To solve the problems related to Windows Live and MSN to check the links below on contact.

  
  After the question in the links below
  http://support.Microsoft.com/kb/940784
  http://windowslivehelp.com/
   
  To solve the problems related to the HP touch computer
  
  Update the HP touch drivers from the manufacturers Web site.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you need to talk to a Microsoft technician, then you can check the link below http://support.microsoft.com/kb/295539

  
  Hope that helps.

• How to configure a VM with multiple network cards to see Agent?

  How to configure a VM with multiple network cards to see Agent?

  We can archive this requirement by configuring the subnet used view Agent.

  The subnet determines which view address of Network Agent provides the server instance to connect to view for the client protocol connections. The view on VM officer has more than one NIC

  Follow the procedure below:

  on a display Agent installed VM,

  * Recording of VM session.

  * RUN--> type regedit or type regedit.exe at the command prompt

  * Create a registry entry to configure the subnet.

  For example: is HKLM\Software\VMware, Inc. \VMware VDM\Node Manager\subnet = n.n.n.n/m type - REG_SZ.

  In this example, n.n.n.n is the TCP/IP subnet, and m is the number of bits in the subnet mask.