October 2014 GI OJVM PSU Combo - 'auto opatch apply' t - it does not stop instances DB?

Similar Questions

• I bought ligtroom 5 06/09/2014, and then installed on my computer. This computer does not like it, I wish therefore installed lihtgroom on my new computer, but it's not market!

  I bought ligtroom 5 06/09/2014, and then installed on my computer. This computer does not like it, I wish therefore installed lihtgroom on my new computer, but it's not market!

  the error message is: "the signature of download package (3) exe, is damaged or is not valid" thanks for your help.

  Hi philippeb41403529,

  Please use the link below to download a fresh installation for LR 5:

  Install Photoshop Lightroom

  See also, How to download, install and activate Adobe applications

  Let us know if that helps.

• External Combo CD-RW/DVD-ROM drive does not work with USB 1.1

  Hello world

  I have a problem with the PA3352E - 2 CD 2 CD-RW/DVD COMBO USB 2.0. A colleague is owner of this car and use it on a NB DellC610 with Windows XP on it. The problem is that the drive does not work with this type of nb (with a NB from Fujitsu-Siemens newest there no problems); There is always an error message about "surge." I think it has to do with the USB 1.1 because the player seems to be built for USB2.0. Is it possible to use this drive correctly with usb1.1 (ok, the flow is low, but more important is it works in general)? Unfortunately his nb will not work with USB 2.0...

  Thank you very much in advance.

  Kind regards
  Steffen Rieger

  Hello

  AFAIK this external must have a power adapter. You use it too? I'm not 100% sure, but there are difference how much power Gets the USB slot. Toshiba notebooks is around 500 my and some producers another laptops send between 300 and 500 my. The external device requires approximately 700 my.

• Auto hide the scroll bar does not work (SE)

  I recently built a simple editing with the new setting "Auto Hide Scrollbar" Viewer, but it does not work as expected on my ipad.

  See the screenshot number and the version of the viewer below:

  

  The scroll bar and the superposition of 6px are still persistent on the screen.

  -Johannes

  Thanks for reporting this. I've logged it as a bug.

  Neil

• Strange behaviour of 11.1.2.3.500 PSU roll back patch - planning an application does not work

  Hi all

  Recently, I applied the patch to POWER 500 block for all products of the EMP. Everything works fine without any problems.

  One of my users not to start the Regional through JAVA 1.7 service Console, that i have applied EAS PSU 500. Here the problem starts after that, none of the user was unable to connect essbase server through eas. They get "error: 105: connection with a token at MaxlJni.

  So thought of reversing all the patches (block of POWER 500 & 500 EAS)

  (1) roll supported by block of POWER 500 patch successfully without any problems.

  1.1) strange question - rear roller command works even for 500 EAS.

  (2) restart the Services

  (3) for the navigation of the app, I had a lot of mistakes for EPMA components. Then I deleted the folder Temp and Cache of the domain directory and restarted the service. Still, I get the below error.

  At the opening of the planning application, I got info like"the version of the application is not the latest version. The existing release. "11.1.2.3.500, release date: 11.1.2.3.

  Don't know how to decline the superior to the inferior version planning application, normally we will do the upgrade process, I am familiar with that one. There is no information in this respect in the Patch document.

  Could you please suggest me in this situation?

  Thank you

  CP

  You have the slashes in the wrong direction for windows, try:

  Restaurant opatch.bat - id 17529887 - oh D:\Oracle\Middleware\EPMSystem11R1 - jre D:\Oracle\Middleware\jdk160_35

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Auto unlock with Apple Watch does not appear in my window security and confidentiality

  "Disable the automatic connection' or Auto unlock with Apple Watch" appears in my window security and confidentiality

  Hello

  Automatic unlocking with Apple Watch is available for the Mac models since the mid-2013 and later running macOS Sierra.

  Check that:

  • Your Mac has Bluetooth and Wi - Fi enabled.
  • Your Apple ID use two factor authentication (as opposed to the two-step verification):
    • For Apple ID - Apple Support two-factor authentication
    • If you are currently using two-step verification instead, follow the instructions here to turn off (under "How can I disable two-step verification?") before you enable two-factor authentication:
      • Frequently asked questions about the audit in two steps for Apple ID - Apple Support
  • Your Mac and Apple Watch are connected to iCloud with the same Apple ID:
    • On your Mac, choose Apple () menu > System Preferences, and then click iCloud.
    • On your iPhone, open the Apple Watch app, then go to general > Apple ID.
  • Your Apple Watch uses a password:
    • On your iPhone, open the Apple Watch app, then type the access code.
  • Transfer procedure is enabled on your iPhone and your Mac:
    • On your iPhone, go to: settings > general > transfer procedure.
    • On your Mac, go to: System preferences > General - down, tick the option "Allow transfer between the Mac and your iCloud devices."
    • If these parameters are already enabled, a user has found that it helped to deactivate and reactivate the procedure of transfer on their iPhone.

  More information:

  Automatically unlock your Mac with your Apple Watch - Apple Support

• DVD/CD-RW COMBO in Satellite L30-114 player does not close

  Hello!

  I have some problems with my carpet * a reader of DVD/CD-RW COMBO in Satellite L30-114. It will not simply close easily, I have to use a lot of strength to shut up and try several times before I do it.

  These readers are as bad as I think? Also DVD playback compatibility is lack and the car slows down to MUCH what reading dvd recorded and original :/ there is no problem with CD, but with the DVD.

  What should do? is it possible to fix this closure with screwdriver and 5 minutes or should I give it back to the point of repair? I ask this cause of self-repair Ive to go to 300 km to have the Service more close to authorized Toshiba (I live in Poland.

  Greetings,
  Peter.

  Why this readers must be bad? Perhaps you n your car on the right t-handle way and now you have the problem. I put t know about the position for which you are a pressure when you want to close, but do it enough in the middle. On this way the pressure is evenly distributed on both sides.

  If the drive must be exchanged this doesn t mean you have to go there personally. I'm sure that you can send your laptop to them as in all other countries.

  Sorry, but the problem with DVD play is not understandable for me. You can watch original DVD movies or not? Maybe a little better description of the problem will help you.

• Auto-scan for presets FM does not

  My Sansa Clip 1 GB will not perform auto search FM stations.  I go through the procedure, it scans for stations, but when it's done, there is no preset station.  Is this a common problem?

  Thank you

  You try the automatic scanning with the connected headphones and headset in full extension cable? The headset cable is the FM antenna.

• copy / paste from 2014 to 2015 Rectangles with graphic styles don't return does not correctly.

  I open an Illustrator Document of 2014 in 2015 with a rectangle in the corners rounded as a graphic style.

  Paste this into a new document, and the actual location of the rectangle and the location of the show are FAR apart from each other.

  Change the race, and it can be corrected.

  Open a Document from 2014 to 2015, to APPLY a graphic style, corner rounding, save it... Open it, copy it to a new document... Did the same thing.

  Fix who in a 2015 NEW Document, save/open/then copy it on a 2014 file, open in 2015... and the screw up which comes back.

  Only face a NEWLY drawn with a graphic style to a NEW document box Illustrator NOT screw this place.

  Just change the rectangle a little to fix this error.  Re apply the graphic style... edit a stroke color /... but it happens EVERY time.

  Please apply the latest patch 19.1 this should solve your problem.

  -Ashutosh

• Auto unlock with Apple Watch does not

  Hello

  I followed all the instructions and advice of all Web sites without success, my watch is on my wrist, unlocked and the Mac cannot communicate with the watch, or when he's on the odd occasion that the watch is not open the Mac, I still have my password.  I have not matched and repaired the watch, and the new registered in iCloud, transfer off and on again, the watch, the 6s iPhone and watch are all connected to the same network still with no luck.  This should be an ongoing and easy process as most of the functions of apple, but it just doesn't work and it is the function that I was more enthusiastic in this upgrade of the software, feels a bit like false advertising if it's this hard to operate.  Can apple be solve this problem or can help a tech guru

  If the problem is that when you check the box "Allow your Apple Watch unlock your Mac" in security pref pane it breaks down and said that one cannot communicate with your watch?

  You have Bluetooth and Wi - Fi enabled?  If so, try to restart your Mac, iPhone and look, and check the box again.  Also sometimes if you just wait a few hours and try to check the new it will finally work.

• After sleep, cannot connect to, some character typed by system, auto tried never sleep, but does not?

  After migrating to Yosemite, I can't connect IMac is passed to sleep, do hard start upward, I checked for HD never sleep, but not able to resolve? Worked perfectly before upgrade to El captain.

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - subject

  Safe mode - Yosemite

  If it works in safe mode, try to run this program when it is started normally, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• yesterday, October 5, 2015, I installed the latest version of firefox which does not allow me to open a new tab as my home page - how can I fix?

  In previous versions of firefox, I could use about: config to make the new tab opened as my home page. the latest version of firefox doesn't seem to allow this. I find it very frustrating that all the search engines seem to want to dictate what I see when I Browse. I wish to install the new version of firefox

  In Firefox pref browser.newtab.url 41 disappeared. This pref has been hijacked by malware so frequently while Mozilla has decided to remove this pref to eliminate this kind of diversion.
  You will need an extension like this one to restore.
  https://addons.Mozilla.org/en-us/Firefox/addon/new-tab-override/

  Or to have your home page as the new tab page, try this extension.
  https://addons.Mozilla.org/en-us/Firefox/addon/new-tab-homepage/

  If you're using Classic theme restaurant, go to the options of CTR > general UI (2) and set your preference for the new tab URL there.

  For Super Start , you can use the topic: superstart page.

• After auto update installed, Windows Vista does not start

  Individuals:
  Windows Vista Home Premium w/Service Pack 1 installed
  Dell Studio 1737, 64-bit

  Problem:
  Earlier this week (I think it's the 16th), my computer has installed an automatic Windows Update and restarted.  When she came back to the top, it says Windows could not start and asked if I would so he can try to restore the operating system to a previous point in time or if I try to restart Windows.  I tried to start Windows again (this time with my fingers crossed), but got the same message.  So I went for the #1 option and after half an hour, or so, I got a new error.  To be honest with you, I have seen so many mistakes in the last week, I don't remember exactly what he said, but I wanted to go to the advanced options, where I could choose a restore point manually.  I have put back to point restoration 6/15 and had no problem getting Windows to start.  Unfortunately... Windows REALLY asks me to install this update so at 03:00, after spending at least an hour and a half on the issue, he did an update automatic, rebooted and Windows wouldn't start again.  So, again, I am through the whole process (it's the only way I found to manually choose a restore point) and me to start Windows.  Then I disabled the automatic update in the hope that I could skip this update.  However... Windows has put the updates to install every time I put it in mode 'sleep'.  You can see where I'm going with this.  Now, any time my computer stops for some reason, Windows refuses to restart.  To make matters worse, the last time I had to go through this process, for some reason any he would not support up to 15 and I had to try again and it backwards until the 13th.  Please help me!

  You did little to restore the system.

  Hide this particular update, if you do not need!

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  Mick Murphy - Microsoft partner

• Jet 7 (5709) Auto Rotation of the screen does not

  What drivers or application is installed which allows the screen to rotate the mode landscape to portrait when the power is on? My screen is no longer made rotate and I believe that something can inadvertently uninstalled that has enabled this feature. I've updated / installed all three packages available on site support without luck?

  All of the drivers listed have been marketed on the site of Stream 7 downloads & drivers HPand are available for public download. Thank YOU HP support allowing the customer to self-help. This is a great little device SLEEP simple tasks.

• Auto update is on, but does not work

  I always had the automatic updates set to automatic and have not changed this setting, but I get a red shield with a message that automatic updates are not running.  I ran the patch program, and which is not correct the problem.  I am running Windows XP SP3.  I can't turn them on for Security Center, I go to the Control Panel, and they are, indeed, more.  I downloaded the patch program and diagnosed a problem with the automatic updates, it could not solve the problem.  Help, please!

  I ran difficulty once again, and he says: update Windows components need to be repaired.  Not fixed.  I chose the no choice, the problem has not been fixed. Then, consider alternatives, and that's how I got on this forum.

  Click Start > run > paste the command below in the Run dialog box, and then press ENTER.  Wait for the success message. After receiving the success message search Microsoft updates.

  % SYSTEMROOT%\SYSTEM32\REGSVR32. EXE, % SYSTEMROOT%\SYSTEM32\WUAUENG. DLL