Strange behaviour of 11.1.2.3.500 PSU roll back patch - planning an application does not work

Similar Questions

• 500 t - 205 CTO Pavilion: xD card reader does not work

  I have a brand new desktop CTO 500 t - 205 of Pavilion, with Windows 7 Professional 64 bit. It is running well, except for the reader of card on the front of the machine. I use a 2 GB Olympus xD card. When the card is inserted, the led lights up for about 10 seconds, then turns off. Windows Explorer does not see the card and I can't find it in the Device Manager.

  Thank you

  David

  Hello

  I think that it does NOT support xD cards, please do not put this type of cards, it will damage the card and the reader. Please see the list of supported memory cards:

  http://support.HP.com/us-en/document/c00068354

  Kind regards.

• Qosmio X 500-116 - Pinch Zoom on Synaptics touchpad sometimes does'nt work!

  Model - Qosmio X 500-116 (windows 7)

  Hi all

  I m occasional annoying problems with my Synaptics touchpad V7.2

  Every now and again the Pinch Zoom on Synaptics Touchpad does not work (it happens about once every 5 cycles). When this happens, I m impossible to enlarge/reduce the size of the screen of internet browsers or msoffice documents. Although I can still use the keyboard to increase or decrease the size.

  I tried to uninstall and reinstall the driver it came with (version - 13.2.7.3) but the problem remains the same.

  I checked Toshiba site for the Synaptics Driver updates for my machine. It lists my current driver 13.2.7.3 and also another version of the 14.0.15.0 driver.

  I figured that I d try to install version 14.0.15.0, that he went through the motions of the facility, then at the end, that nothing happened and he n t installed. So I went back to version 13.2.7.3

  Has anyone encountered this problem? If so, any suggestions or ideas would be appreciated!

  Kind regards

  Bren

  Have you tried the driver for the touchpad that is available on the page of the Synaptics driver?
  http://www.Synaptics.com/resources/drivers

  Check it out and report its operation.

• Qosmio X 500-webcam does not work after the installation of W7 Ultimate

  Hello
  I have a big problem.

  First: Sorry English is not my native language and I can't find a German support forum here.

  I have a new laptop Qosmio X 500, and I installed Windows 7 Ultimate 64 - Bit of news. I try to install all the drivers from the site Web of Toshiba, but it't really didn't work with the Webcam.
  I can't install it. It works once, I can install the "Web camera Application", but he says that it cannot find the web camera. Then, I uninstalled the "Web camera Application" and try to installed new.
  Who does not work now too. He asked: "if I'm going to delete all" but I delete them all! And I can not install the "tinstall.exe" I don't know what it is, but it is from the WebCam Driver of Toshiba.

  In the Device Manager there is no Web camera too.

  All means what? Is the WebCam broken? I've had the laptop for 5 days.

  Greetings

  Hello

  Qosmio X 500 shipped with Win7 64 bit OS so I really put t understand why you use clean install of the OS. Ultimate version is so important to you?

  At first, I must say that the Qosmio X 500 is more complicated for laptop for any new OS install and all things must be installed in the correct order.

  But back to your questions:
  > All means what?
  It probably means that you are missing something
  > Is the WebCam broken?
  Probably not. Install original OS, you got with your laptop and test the features of cam again.
  > I've had the laptop for 5 days.
  This statement is not relevant at all. If you do something yourself and it works not that's problem and even your laptop is 5 hours old.

  What now? is original OS install an option for you?
  You have created recovery DVDs until you have installed the clean version of Win7? I hope because without DVD, you won't be able to install it using the option of HARD drive recovery.

• Qosmio X 500-1801-FN key does not work with Win 7

  I have to question why Toshiba Qosmio X 500-1801 FN buttons does not work on the Windows 7 Professional 32-bit operating system. Please answer the [email protected]

  For the FN buttons work, you must install VAP (value added package) and Flash memory card Support utility.
  These two tools are located on the European driver Toshiba page.

• Yoga 15 500 MICI - Dolby digital app does not work

  I improve my SDS HARD drive and reinstall Windows 10 and install it manually download Lenovo driver Realtek but Dolby digital plus app does not work? Model 500 15 DCI Yoga

  Comment to Moderator: The model is added to the object for clarity.

  I found a solution, if someone face same issue:
  Downloads of the latest drivers updates catalogs Microsoft

• HP 500 b Micro Tower: after upgrade to windows 10 dvd player does not work

  Before the update windows 7 windows 10, I ran the windows 10 application to check all my gear.

  Windows 10 says that all my hardware is compatible with windows 10.

  After installing windpws 10 does not work my cd/dvd litescribe drive.

  There is power coming to my dvd player, because I can open & close the player.

  Device Manager does not detect my dvd drive.

  I've updated all my drivers through HP assistant & he said that all my drivers are up to date.

  My pc is a HP 500 b Micro Tower

  Product number: XT419EA #ACQ

  Can someone help me fimding good firmware for my dvd player.

  Hello:

  See that if steps listed from the link below resolution 5 solves the problem.

  https://support.Microsoft.com/en-us/KB/314060

• Pavilion 500-081ea: FRONT USB 3 PORTS don't DO NOT WORK.

  I recently had an ASROCK H61M-DG3/USB3 motherboard mounted in my not so old (18 months) HP Pavilion PC 500 - 081ea & even if original HP 3 USB ports are connected to my new motherboard that do not work.  All the USB in the BIOS settings are turned on & the right USB drivers are installed in "Device Manager" without conflicts I still can't use the two front 3 USB ports.

  Hi Jeff,

  The reference to a technician came from your other messages.  In any case, the cable USB 3 header, as previously mentioned will restrict the question.   I keep this cable in my toolbox for situations like yours when I change sets and motherboards.

• HP Pavilion 500-314: keyboard does not work on startup

  At the start, that the keyboard is not working I have to unplug it and plug it back in

  to make it work. He doesn't do it every time that 1 in 10 starts. The mouse works fine.

  I tried differrent 2 same keyboards. Tried different ports samething.

  HP Pavilion 500-314

  Hello @jwhisenhunt,

  I understand that your desktop computer keyboard work correctly, and that this problem occurs with more than a keyboard. I'd be happy to help you in this case!

  This problem occurs if you start your computer in Safe Mode? Your keyboard is connected to a PS2 or USB port?

  In the meantime, I recommend that you follow the steps described in this document on the wired keyboard (Windows 8) troubleshooting. This should help to correct for non-response of your keyboard.

  Please re-post with the results of your troubleshooting, as well as the information requested above. I look forward to your reply!

  Concerning

• Why my XP does not recognize a Toshiba 500 GB USB external drive... it does not appear in disk management or in computer

  Bought a new Toshiba 500 GB drive external usb.  My XP desktop won't recognize/find this disc.  It does not appear when you view the disk management or work station.  I also have it on my new laptop (Vista) and it has been found immediately.  My research online only tells me to find the external drive in disk management and assign a drive letter to... but I don't think to assign a letter! Toshiba says that the drive is compatible with XP. I have another smaller disk capacity that work perfectly on the XP machine.  Please tell us what should I do to have my Office XP recognize the
  is the new external hard drive.  E-mail address is removed from the privacy * or * address email is removed from the privacy *.

  Three things that you have not yet mentioned are

  1. don't change you the registry suggested by the KB Article (see: a computer that is running Windows XP cannot detect a USB flash drive, an iPod from Apple or an external hard drive)?  I suggest do it manually instead of using the FixIt.

  2 represents the drive recognized in the Device Manager (start > run > devmgmt.msc > OK)

  3 is the drive recognized in your BIOS (press the corresponding key on startup).

  Reformat to FAT32 was probably not necessary (and you'll probably want to re - format to NTFS before use).  XP has no problem with large (> 500 GB) external USB drives.

• I can't get the Microsoft wired keyboard 500 to work on my laptop. I bought a PS2 Connector USB to actually connect to laptop. I also downloaded the software from Microsoft, but still nothing. Does not work.

  Remember - this is a public forum so never post the private information such as email or phI cannot get the Microsoft wired keyboard 500 to work on my laptop. I bought a PS2 Connector USB to actually connect to laptop. I also downloaded the software from Microsoft, but still nothing. Do not work.one numbers!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Louise South,.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  I suggest you to uninstall the software and reinstall it from the link below.
  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  Check whether the problem is resolved.

  Method 2:

  Follow the instructions in the link below and check if the problem is resolved.

  Troubleshoot wired keyboards that do not or only the erroneous characters category
  http://support.Microsoft.com/kb/258826

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Microsoft lifecam vx - 500 conact my pc but does not work

  LifeCam vx-500 works does not in my pc

  Hello

  1. Did you change your computer?
  2. Have you received an error message?

  I suggest you follow the link and check.

  Troubleshoot failures to find the new LifeCam hardware

  http://support.Microsoft.com/kb/929087

• How do I adapt bridge CC2015 settings, so it does not work with my new MacBook Pro (10.11.1) at 500% CPU?

  Bridge CC2015 to run my new MacBook Pro (10.11.1) extremely hot. Fans are crazy and there are 500 + % CPU use.

  Is there something I can adjust back to normal levels? I can't use it otherwise, it's going to melt my computer. Any suggestions?

  Hello!

  I disagree, Photoshop was running the CPU very high, constantly above 100% (but not as bad as the bridge, which was greater than 500%) - especially when using healing and cloning brushes in quick succession, not to mention tool of transformation, which was even worse. The only way I could use it would normally operate in low resolution. I do a lot of pro work of retouching in Photoshop, so it is very demand a lot of work.

  With PS 15.0.1 put a few days previously, it seems to work normally, however! Except the transformation tool, who infiltrates the fan works, but not as bad as before.

  A strange thing happened, Bridge seems to work ok now. Don't know what happened. I am connected to an external monitor, but I don't see how it would matter. Maybe Photoshop upgrade had something to do with it?

  I guess my problem is solved even if I have not changed anything.

  Thanks for your help!
  Manja

• Qosmio X 500-Port VGA does not work

  Hello

  The VGA port doesn't seem to work in my Qosmio X 500 02 g.
  Can someone tell me why?

  My hypothesis is a defective VGA Port, because it worked very well, but there might be a chance that there is a random setting that gives me a hard time.

  The cablings - tested on my desk (also used a different cable)
  The monitor works - use it with my desktop computer (also tried with another monitor and a TV)

  The laptop acknowledges that the monitor is connected, when I'm in the resolution settings and click "Detect" that it finds the monitor (and when I remove it, it disappears) when I disconnect the cable from the monitor fate of sleep to tell me there is no VGA input detected (but when it is plugged it still tells me there is no entry).

  I tried to turn on the laptop with the connected monitor.
  I tried to change the resolution and display settings.
  The graphics driver is updated.

  I read the manual, it isn't something useful here in on the subject.
  I tried "duplicate" and "extend" display options.

  When external screen is not connected to the computer and when you use the FN + F5 key combination appears only one output option LCD.
  When portable external is connected and recognized correctly several options will be available for FN + F5 key combination.

  Can you please check this and see if you can switch between notebook LCD and external monitor by using the FN + F5 key combination?

  Post comments.

• Pavilion 500-449: monitor screen does not work with the new HP Pavilion 500-449

  Not sure if 64-bit or 32-bit.  More HP vs 19 flat screen LCD monitor or new monitor LG Flatron E2242 will appear with new HP Paviion 500-449.  Both will be lit.  Monitor says HP VGA No. imput and goes to sleep.  LG monitor says it's to enter the mode, same thing, I guess that energy saving.  The two appear on older HP Pavilion a1430n.  Store support suggests the problem lies in the monitor menu options but they do not display with a try monitor.

  Abandoned and reduced to store.  When they were scuffered too until they tried a second monitor in the back and noticed that it connected to a different place in the back!  Seems a converter is needed for old VGA monitors and then he plugs into a completely different place.  Originally, the husband plugged the power cord VGA of my screen instead of ONLY on the back, he could go, the marked spot VGA.  No, the converter is a big plug and can only fit above in a place with NO Label at all.  On top of that, everything IS there a converter plug supplied in the box with the computer, but there is absolutely NO mention of what to do with it, or where it goes.    I feel better that the store did not know that either; Clips by the way, where the young man was very nice.    He only discovered by accident because the store had two monitors with different plugs on the end.

  Short Stort of long, if yours doesn't receive will check that plug that goes to the tower.  You may need a converter and it can even be provided.