ODI-1222: start failure on agent edge internal: logical schema was not found in the main repository.

Similar Questions

• Application has failed to start because msa32dl was not found, reinstalling the application may fix the problem

  How can I fix it?
  application has failed to start because msa32dl was not found, reinstaling the application may fix the problem

  First make sure that your system is clean in:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  http://www.eset.com/us/online-scanner/ eset online scanner

  Then answer the following questions:

  brand and model of the pc

  current antivirus

  Operating system and service pack

  What application fails to start?

• The error that says "this application has failed to start because sqlite3.dll (also sqlite3.prepare.v2) was not found. Reinstalling the application may fix this problem.

  These messages appear, one after another, at startup.

  Something you have running at Windows startup that uses SQLite is a failure. Find out what this program is (so you can stop it) by managing your Startup:

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  Important - do not use the System Configuration utility to stop the process. Use rather Start > Run > services.msc [Enter] and stop all services unless you really, really know what you're doing.

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx MS - MVP - Elephant Boy computers - Don ' t Panic!

• Connection agent CAD error - code entered was not found.

  Added new device user profile (we use EM), all associations, appears to SIR as should. Everything seems perfectly normal. Looked into Desktop Admin and he does not list user under staff with other officers. Is there a way or a place to make a sort of synchronization? I can restart Sync Services (Office remotely to the machine), but I don't know if it's disruptive to agents that are connected.

  You probably need to restart the engine. It will be dissruptive.

• Mapping of 12 ODI is a failure loading the table to the table in oracle DB

  Hi Experts,

  I'm starting to ODI, attempts to load data from the Table to the Table in Oracle DB. Source table and target table are in the same PB in different schema

  I created my own work, also agent and master repository.

  Started with the agent, and I could see the status as Planner started for referential work * on Agent OracleDIAgent1.

  Created the agent in topology and successfully tested.

  Created data and connections physical schema of the source and target servers, Test connection is successful.

  Created the context and logical schema defined for the source and the target.

  Mapped to the corresponding physical schema context.

  Diagram logical and physical mapping is accomplished in the context.

  Created for source and target models, able to view the data in the source model.

  Created a simple map and put in source and target component context.

  LKM selected as LKM SQL for SQL

  Select IKM as IKM Oracle Insert.GLOBAL

  After execution, the mapping is a failure with the error below

  Drop table work - LKM SQL for SQL

  ODI-1222: start failure on agent edge internal: logical schema * is not found in the main repository.

  Create the table work - LKM SQL for SQL

  ODI-1222: start failure on agent edge internal: logical schema * is not found in the main repository.

  ODI-1222: start failure on agent edge internal: logical schema * is not found in the main repository.

  at oracle.odi.runtime.agent.execution.AbstractSessionTask.getSrcDataServer(AbstractSessionTask.java:1646)

  at oracle.odi.runtime.agent.execution.interpreter.SessionTaskCodeInterpreter.codeInterpretation(SessionTaskCodeInterpreter.java:132)

  at oracle.odi.runtime.agent.execution.interpreter.SessionTaskCodeInterpreter.codeInterpretation(SessionTaskCodeInterpreter.java:80)

  at oracle.odi.runtime.agent.execution.SessionTask.createTaskLog(SessionTask.java:324)

  at oracle.odi.runtime.agent.execution.AbstractSessionTask.execute(AbstractSessionTask.java:821)

  to oracle.odi.runtime.agent.execution.SessionExecutor$ SerialTrain.runTasks (SessionExecutor.java:2024)

  at oracle.odi.runtime.agent.execution.SessionExecutor.executeSession(SessionExecutor.java:562)

  to oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor$ 1.doAction(TaskExecutorAgentRequestProcessor.java:718)

  to oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor$ 1.doAction(TaskExecutorAgentRequestProcessor.java:611)

  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:203)

  at oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor.doProcessStartAgentTask(TaskExecutorAgentRequestProcessor.java:800)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 1400 (StartSessRequestProcessor.java:74)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:702)

  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:180)

  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:108)

  at java.lang.Thread.run(Thread.java:722)

  Please help me with the problem above,

  Thanks in advance.

  Kind regards

  Srikanth

  Hi Srikanth,

  It is usually better to create a separate scheme for the scheme of work, but you can keep the data and schema of work even. Also in your error log, the error should now be to the right of the IKM? No LKM. Try changing the logical schema name and see if it works.

  Thank you

  Ajay

• Explorer.exe Unable to locate component, this applicationfailed start because BROWSEUI.dll was not found, can access windows taskbar or white screen homepage

  Tried the boot failure, etc, but not good, were not the original windows disks

  Duplicate thread:

  URL: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system/browseuidll-was-not-found/7ef0bd88-ec8f-4a5a-bde2-43d0f94cab03

  Title: BROWSEUI.dll was not found

  Details:

  I use Windows Vista Basic (build 6002 sevice pack 2) as widows try to open I get the message, cannot start Windows (explorer.exe Unable to locate component) then a message (this applicationfailed start because BROWSEUI.dll was not found, reinstall the hotfix applicationmay) it's folled by a message (windows explore stopped working) I'm then left with a blank screen bar none tasks or a desk top, the only way to access the internet is through the Manager tasks, but I have no access to windows

  Hi, AlanWalker1885,

  FYI: A moderator will pass this thread to the appropriate forum.  The post belonged in the Internet Explorer forum.  Please take note of the drop-down menus when you click on the link below.  Thank you.

  http://answers.Microsoft.com/en-us/IE/Forum/ie7_6-windows_xp

  Do you have any friends who might copy the file browseui.dll from their Windows XP CD to a flash drive?

  Have you tried to register browseui.dll?

  1. At the command prompt, place you in the %Windir%\System32 folder.
  2. Type regsvr32 browseui.dll/u, and then press ENTER.
  3. Type regsvr32 browseui.dll, and then press ENTER.
  4. Restart the computer

  See the solution given here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/error-message-browseuidll-file-is-not-a-valid/04b33b18-d87c-40AE-BE35-71720dbbbab2

• error"this application has failed to start because GD132.dll was not found.

  If I try to open all the files or download anything I get this message: could not locate component this application could not start because GD132.dll was not found, reinstalling the application may fix the problem. Ive done a scan and have no viruses, but I can't open anything my system restore does not work just intern it

  Hello mwbug,

  Would you like to take a look at this link: http://pcsupport.about.com/od/findbyerrormessage/a/gdi32-dll-not-found-missing-error.htm

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem.

  Original title: error explorer.exe, Normaliz.dll is missing please help me about the issue.

  Hello

  I get the error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem"Please help me!

  Well - so much for the expertise of committed Microsoft Support Engineer 'experts', but no answer to what I expected.

  See how it works for you:

  If you see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  It is in the case Log:

  Event type: Information
  Event source: Application Popup
  Event category: no
  Event ID: 26
  Description:

  Application popup: Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  Start explorer.exe, but the normaliz.dll file.  If explorer.exe is not able to run, you will not be able to do much with your system until the replacement of normaliz.dll.

  You can click OK for errors and finished up in the Task Manager where you can try to fix it.  The message can keep popping up from time to time, while you're fixing it, so just click OK to close the message.

  If normaliz.dll is missing, you can copy it from a working system to the system afflicted with the same version of XP and Internet Explorer.

  You will get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.

  The normaliz.dll file must be located in the c:\windows\system32 folder and therefore is not a Windows file protected, making the Microsoft Support Engineer 'experts' suggest running sfc/scannow, which is just another one of their prosecution of wild goose that will not work, he'll never work and it will only waste your time (and they don't tell you how to run either - if explorer.exe does not start).

  Then engaged Microsoft Support Engineer 'experts' will offer to you develop a copy of the file from the XP installation CD you probably haven't, but it is also not on your XP installation CD, and you will have the same problem try their suggestions to 'try' to start in any any Mode without failure, so this will not help you.  These "experts" seem to think that the Safe Mode boot or boot will replace magically missing files, but it doesn't.

  You also will be able to properly run a browser on the system afflicted to go on Internet download one.

  There is a large computer security risk in the normaliz.dll from some website download.  The best idea is to get a copy of normaliz.dll from another computer that has the same version of XP and IE and replace it from a USB device (which you can access from the Manager tasks), or using a system that works, you can download one of my SkyDrive.

  You can still use the Task Manager to run the system restore and bring it back, but I've never tried and never use SR in all cases.

  If you have recently done a bunch of Microsoft updates, you may have also gotten IE8 so maybe that something was wrong here although the normaliz.dll is the same for each version.

  When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM, you can click file, new task, Browse and edit the menu drop-down "Files of type" to all files that you can see all the files in folders.

  Go to c:\windows\system32 to see if normaliz.dll is really missing. If the error appears again while browsing, just click OK to get past it.  The explorer.exe tries to run and cannot until the missing file is replaced.

  If it's the only thing missing, you can get one from a working system of the same type as yours, copy on a Flash DRIVE or a floppy disk and always using TM, to browse, copy and paste it where it should be or you can download one of my SkyDrive.

  TM, you can still access your thumb or any other medium the same disk by navigating, copy, paste, etc very well all work.  You use TM to navigate to your thumb or floppy disk, copy the normaliz.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.

  If things get worse, just return to TM and remove the file back where you were in first place and continue troubleshooting.

  Using a system that works, you can also download a copy of the file from my SkyDrive and put it on a floppy or USB thumbdrive and networks diskettes for the distressed system.  Sandalenet means wear you the system afflicted by hand.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called normaliz when the name of the file should really be called normaliz.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

• Microsoft XP blue screen and message - this applicationhas failed to start because LSASRY.dll was not found, that reinstallation can correct moyenessentiel,

  no disc recovery... on a Panasonic Toughbook CF-50

  Let's see...

  If you see a message like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because lsasrv WITH. DLL was not found.  Re-installing the application may fix this problem.

  Then, when you click OK, you have nothing more than a mobile mouse cursor.

  I seriously doubt that the opinion of the engineer of Microsoft Support for try the last good known Configuration will replace a missing file, so that theory approaches the area of ridicule.    This is not what LKGC, that is not what he does and is not how it works.

  Re-installation of XP is a very bad idea.

  There is also no need get a Windows XP installation CD, because you can create a bootable XP Recovery CD yourself and then see to replace the missing file.

  I understand not all next to a Microsoft representative.  Obviously not tested, won't work, won't help, but there are the necessary links to an article.   It's just another MSE wild-goose chase.

  The lsasrv.dll file should really never be missed, so answer these questions as the best yo can:

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  If the system works, what do you think might have changed since the last time it did not work properly?

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Then at the Recovery Console prompt enter orders to replace the missing file from backup copies that are already on your system:

  Copy c:\windows\system32\dllcache\lsasrv.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  Depending on your system configuration, you may need to copy the files somewhere else, so if they are not in the folder dllcache for any reason, enter the command like this:

  Copy c:\windows\ServicePackFiles\i386\lsasrv.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  Remove the CD and then type "exit" and restart your system.

• STOP: c0000135 {Unable to locate component} __This application failed to start because winsrv was not found. Reinstalling the application may fix this problem.

  I have a problem with my laptop which comes to hang. Bluie screen.
  the screen show:
  STOP: c0000135 {Unable to locate component}
  This application has failed to start because winsrv was not found. Reinstalling the application may fix this problem.

  In my opinion, is due when I have T.V. Media installed on your computer. I try to use the safe mode and select disable it the automatic restart on system failure option and press ENTER. But nothing works. I have all the time the blue screen with winserv wasn't written. I try to have access to have access to safe mode or something to download, because I try to download criticism 885523 update that I download on a USB key.

  Please this drive crazy me I need your help

  You receive a "Stop: c0000135" and "winsrv was not found" error message after you install Windows XP Service Pack 2

  http://support.Microsoft.com/kb/885523

  S.Sengupta Media Center MVP

• System startup with the following error: this application has failed to start because BHO. DLL WAS NOT FOUND.

  Original title: APPS

  WHEN I TURN ON MY COMPUTER, A BOX IS DISPLAYED THAT SAYS: "THIS APPLICATION COULD NOT START BECAUSE BHO.» DLL WAS NOT FOUND.

  REINSTALLING THE APPLICATION MAY FIX THIS PROBLEM... The APP IS ie3sh.exe... I DON'T REMEMBER TO UNINSTALL ANYTHING... I have

  THE THING OF RESTORATION WHERE YOU PUT THINGS BACK THE WAY THEY WERE AT A CERTAIN DATE... BUT THAT WAS BEFORE THE

  MORE DATE OLD HE SAID I COULD GO BACK, WHAT HAS NOT HELPED... I ONLY AM NOT COMPUTER SAVVY, SO IF YOU HAVE AN ANSWER, PLEASE

  BREAK IT DOWN STEP BY STEP... P.S. THANK YOU I USE WINDOWS VISTA HOME PREMIUM... AND I INSTALLED ALL IMPORTANT

  UPDATES... I HOPE I'M THIS SENDING TO THE RIGHT FORUM...

  I suggest you to follow the steps below and check if it helps:

  Method 1: Try to boot in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2: If the problem does not exist in Mode without failure, then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Also try to scan your hard drive for Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• Suddenly the apps work not (start.. net.rim.device.api.ui.manager .class not found error)

  All of a sudden my apps no longer work

  always "start XXXX error: class 'net.rim.device.api.ui.manager' not found.

  everything compiles fine

  remove all my cod, jar,... directory of Simulator

  clean all projects

  Nothing helps

  from a demo app

  My applications have dependencies to some libraries

  really, you're wondering where to find

  any ideas?

  reason: size of the resource of a library project has been nearly 8 MB

  one of my libraries (where the wallpaper of my browser are stored as png resources) becomes a size of about 7.5 MB

  I know that 8 MB less certain overhead is the maximum allowed size

  (this is the reason why I use some library projects)

  I have learned the hard way that a message like

  NullPointer INTERNAL means "application or a resource too large.

  in this case last month as he tried to PACKAGE an application where the limits of size (app 8MB max size + resource set size 8 MB max) are reached

  but this time there was no error when packing - my library projects and soft with dependencies to these libraries compile well and packing has been without any reported errors

  This time, it occurs during EXECUTION of the application and an error like ' net.rim... class ui. Manager not found "is not very intuitive to think that the size of the resource of one of your library projects is too large

  I don't want to revisit the discussion why these limits exist on modern smartphones (do not have these limits with Android or iPhone), but...

  PLEASE PLEASE RIM

  -Why not offer a message meaningful all-in-package as ' Attention: size of the XXX project resources (or the size of the app) is near the maximum of 8 MB - please restructure your projects instead of "class not found during the race.

• ODI-1226: Error_log_procedure step fails after 1 attempt. ODI-1232: the execution of the procedure error_log_procedure failed. ODI-1246: the logical schema has not been defined for error_log_procedure.

  I created a procedure running during the mapping fails but I am facing this error

  ODI-1226: Error_log_procedure step fails after 1 attempt.

  ODI-1232: the execution of the procedure error_log_procedure failed.

  ODI-1246: the logical schema has not been defined for error_log_procedure.

  at oracle.odi.runtime.agent.execution.AbstractSessionTask.getCollectDwgConnectConnection(AbstractSessionTask.java:754)

  at oracle.odi.runtime.agent.execution.AbstractSessionTask.getCollectDwgConnectConnection(AbstractSessionTask.java:730)

  at oracle.odi.runtime.agent.execution.SessionTask.getExecutor(SessionTask.java:239)

  at oracle.odi.runtime.agent.execution.SessionTask.processTask(SessionTask.java:152)

  at oracle.odi.runtime.agent.execution.SessionTask.doExecuteTask(SessionTask.java:111)

  at oracle.odi.runtime.agent.execution.AbstractSessionTask.execute(AbstractSessionTask.java:864)

  to oracle.odi.runtime.agent.execution.SessionExecutor$ SerialTrain.runTasks (SessionExecutor.java:2024)

  at oracle.odi.runtime.agent.execution.SessionExecutor.executeSession(SessionExecutor.java:562)

  to oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor$ 1.doAction(TaskExecutorAgentRequestProcessor.java:718)

  to oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor$ 1.doAction(TaskExecutorAgentRequestProcessor.java:611)

  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:203)

  at oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor.doProcessStartAgentTask(TaskExecutorAgentRequestProcessor.java:800)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 1400 (StartSessRequestProcessor.java:74)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:702)

  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:180)

  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:108)

  to java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:471)

  at oracle.odi.runtime.agent.execution.job.OdiJob.call(OdiJob.java:73)

  at oracle.odi.runtime.agent.execution.job.OdiJob.call(OdiJob.java:73)

  at java.util.concurrent.FutureTask.run(FutureTask.java:262)

  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:615)

  at java.lang.Thread.run(Thread.java:724)

  Navigate to the ODI object with the name error_log_procedure , which I assume is an ODI procedure. On the target tab (and if this source) make sure that you have specified a logical schema in the appropriate drop-down box

• Tecra M9 - TPSMain.exe cannot start because CpePerf.dll was not found

  Hi and help,

  searched the Web and found other discussions of the forum with similar questions.
  Tried all suggestions, nothing worked. I'm not very good on the computer but you can find my way. In any case...

  After connection messge pop messages - up in succession, similar to: TPSMain.exe cannot start because CpePerf.dll was not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found

  Computer works very well but Power Saver start is not automatic and can't select it from the Panel... "" Toshiba power saver does not work. "
  so select the power options... "could not start because the CpuPerf.dll is not running.
  Did all the research on the net and followed all the tips... i.e. unistall saving in safe mode, uninstall toshiba common utility can uninstall fatal error 0x7e

  Then download Ccleaner, inspections, uninstall with Ccleaner same fatal error.
  In support of Toshiba and tried to install Power Saver... same problem will not install.

  Thus help help help if possible.
  Computer works well but popping up messages are annoying and I'd love to sleep to extend battery.

  Tried the system restore, even though I doubt that it affects the files... Another problem "cannot complete system restore"... tried this several times and cannot restore the system either... What is happening?

  any help please
  Tim

  Hello

  I think you can solve this problem, recover the laptop.
  But that would mean that the whole HARD disk should be formatted and would be installed everything again, I put t know if this is an option for you

  It turns out that something will not with the Toshiba Power Saver installed and, consequently, the popup message.
  Usually new installation of GST should help. But it was not and I m wondering why

  Maybe this is s question really an OS since system restore help (to the previous state) didn t

  He s strange question right now I can suggest only a new recovery

• Error hpqtra.08.exe - Unable to locate component this application could not start because the WINSPOOL. DRV was not found.

  Original title: I have Security Essentials, but still had this - HELP!
  I get error hpqtra.08.exe - Uanle component not found. Then he said: this application has hurt to start because the WINSPOOL. DRV was not found. This applicvation reinstalling may solve the problem.    Any clues on what to do?

  Try to reinstall your HP Imaging software and printer drivers.

  Jim