ODI compatibility with versions prior to Essbase 9.3

Similar Questions

• BlackBerry API Web services 12 - compatibility with version 10

  Hello

  Plan ahead here... I'll build a set of web pages that perform functionality admin for BES 5/6 and 10 BES using BlackBerry web services. I would like to understand what changes, if any if to do when BES 12 happens. The API will remain the same? What changes, if any there? There may be additional features that could be useful?

  Thank you

  John

  Hey John,

  Although I expect that there are features of addtitional, BES12 documentation has not been published, so the list of features is still not yet public. Regarding Webservice of Blackberry, I don't foresee much change to the existing list of APIs with the new version, the transition should be as transparent it would go BWS with BES 5 BWS on 10 BES.

• Whenever I start Firefox (version 10.0 - release version) it checks compatibility with Add-ons as if I just installed firefox.

  I had the problem of the Firefox page successfully updated the opening whenever I started Firefox and have been since fixed one, but whenever I start Firefox (version 10.0) it checks compatibility with modules whenever

  Hi organicdj,

  You should watch the unsaved Preferencessection. It could be a problem with the pref file that does not store the fact that this control has already been run.

  Hope this helps!

• How to recharge the old version of firefox? A new not compatable with roboform.

  Downloaded the new version and discovered not compatable with robo form. tried to use my computers systems restore points but now nothing happens when I try to open firefox.

  What version of Roboform, what version of Firefox?

• Workstation 12 Pro backward compatibility with previous versions.

  After having been informed on a cat to support Workstation 12 Pro is fully compatible with all previous versions, I buy the product.   After installation, I try to open a virtual machine created in Workstation 8 without success.   I went to the preferences box and configure the product for 8 x compatibility, with the same results.

  After double clicking the VM vmx file, the product does absolutely nothing, no errors, no message, nothing.   I want to know if this product really is backward compatible and if this is the case, what should I do to make it work with the virtual machines created in WS 8 x?

  Your help is appreciated.

  Reynaldo Nunez

  Thanks a lot for your answer.   What technical support is suggested:

  Through our discussion, we did the below steps, and this has helped us to solve the problem:

  1. from the VMX file, we have deleted similar entries to:

  Policy.VM.mvmtid = ' 52 6f 36 0f 31 9f f3 f9 d6 da 9f f5 90 7B this 76.

  policy.vm.managedVMTemplate = 'TRUE '.

  policy.vm.managedVM = "FALSE".

  2. we have built and rebuilt the two files 'VMware political' outside of the virtual machine and then we were able to power on the virtual machine.

  Now, everything should continue to be stable and we should not have problems.

  THIS MARKET!

• Remove the compatibility with older Versions of Adobe Acrobat

  I'm trying to scan hundreds of documents as PDF files using Adobe Acrobat Pro 9.5.5. I'm on Mac, the latest version of El Capitan and find that Preview 8.1, the PDF Viewer integrated for OS X, has difficulties to open a portion of my scanned documents. Interestingly, the only ones who have color in them. Black and white analysis open very well. I think it's an Apple problem, and not what I'm here for.

  Anyway, I went back to PDF it wasn't opening and Acrobat to remove compatibility with earlier versions of Acrobat. I kept compatibility with "Acrobat 4.0 and later versions. After that the file opened without problem in the preview. I noticed that the quality of the new PDF degraded slightly when I removed the compatibility. I guess that's because Acrobat must perform a new rendering of the PDF file.

  Is there a way I can create a PDF file to a JPEG file that is only compatible with versions 4.0 and later? I rather do pretty early in my workflow, and then go back and remove the compatibility and degrade image quality.

  Thank you!

  Hi Link648099,

  First thing, Acrobat 9 is not compatible with Mac El Capitan.

  The PDF created in Acrobat 9 shouldn't be compatible with version 4, please check the levers of the compatibility of the https://acrobatusers.com/tutorials/understanding-pdf-compatibility-levels PDF

  Kind regards

  Nicos

• Dreamweaver MX 2004 compatibility with the latest versions?

  Dreamweaver MX 2004 compatibility with the latest versions?

  I have templates in an old Dreamweaver MX 2004 and want to update my software. Will I need to go step-by-step to a version a few years back and then run?  Or can I go completely aware?

  I also can't my old dreamweaver register more and they have NO support for it.  Clues?  It is legitimate one I have the registration number and all the same, but he won't take it for some reason any.

  Thank you for any support you can give.

  droopydrawers wrote:

  ... I also can't my old dreamweaver register more and they have NO support for it.  Clues?  It is legitimate one I have the registration number and all the same, but he won't take it for some reason any.

  MX is the latest version of DW which was created by Macromedia, before the Adobe acquisition. I do not think that it was never actually supported by Adobe, but definitely not now (I think that DWCS6 is the oldest version still supported). The activation of this program servers have long been extinguished, it goes without saying that the registration would be also missing.

  You might be able to use the trick here to activate if you encounter problems with this: error: cannot activate | Product Macromedia

• Version compatibility with different types of devices 27?

  Hello, I would like to know the compatibility of version 27 with different types of devices. Where can I find this information?

  All spectators are supported with a version of spectator folios v27 target.

  Neil

• El Capitan compatibility with Office 2016

  Are you convinced that install OS 10.11.1 El Capitan can solve the problems of compatibility with Office for Mac 2016?

  First of all, the only available version of El Capitan is 10.11.4, second, you, what are the problems with compatibility? I'm not aware of anything. Maybe you can offer them upward.

• 10.11.2 OSX compatibility with EpsonScanner V330

  10.11.2 OSX compatibility with EpsonScanner V330

  Check the Canon website to see if they support the unit on OS X 11.11.2. Apple does not have the printer and scanner drivers, these are provided by the manufacturers of the devices.

  If Epson does not support the unit on 10.11.2 so be sure to visit Vuescan and download a trial version and see if it works for you.

• Discrete cards compatibility with HP ENVY h8-1403es

  Hello

  My friend wants to change his 640gt included in a HP ENVY h8-1403es for another graphics card. He wants to install a 770gtx but it seems impossible because of lower power, not enough distance to place it in the pc box and has problems with motherboard bios "IPMMB-FM (Formosa)" it seems has no compatibility with the 770gtx series and others... causing a black screen at startup bios.

  I read something about the best compatibility with the gtx 6xx series, but first of all, I want to be sure compatibility in the Bios that the models or similar.

  Can you please confirm compatibility graphics cards?, updates or bios problems?, also to ensure that the problems of knowledge. ? It is the only location only?...

  A recommendation on compatible cards?

  Thank you very much.

  Hello

  Apply the update posted last BIOS prior to a new installation of the graphics card.  You'll need to access the BIOS and disable Secure Boot to apply the update to the BIOS.

  HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

  The h8-1403es HP has 460 watts power, so if you do not want to replace the power supply then you need to find a graphics card that meets the minimum power of 460 watts nominal power graphics card manufacturers.

  If your friend wants a faster than the 640 graphics card then space must be freed up on the inside to adapt to a double wide graphics especially if the graphics card is of the order of the 770 of NVIDIA.  Graphics in the NVIDIA 770 range would require a bigger power supply.

  Consult this publication of the article.

  Sapphire R7 250 would be much better than the 640, but not in the range of the 770 of NVIDIA.

• hardware compatibility with windows xp

  I tried to install an external hard drive and a USB key, but windows says strongly I should stop installation because the products have not passed windows logo testing. is it safe to go ahead and install it because the two products state that they are compatible with windows xp, or should I not? I don't see a lot of products these days logo on the box of the product, but they claim that they are compatible.

  I tried to install an external hard drive and a USB key, but windows says strongly I should stop installation because the products have not passed windows logo testing. is it safe to go ahead and install it because the two products state that they are compatible with windows xp, or should I not? I don't see a lot of products these days logo on the box of the product, but they claim that they are compatible.

  Go ahead and install the equipment.  If you're worried, see the web site of the manufacturer to ensure that you have the latest version of the driver there (it may be newer than the driver on the CD that came with the hardware).

  You won't see a lot of products these days with the Windows XP logo on them because Windows XP is no longer sold by Microsoft and the hardware vendors are focusing on Windows 7.

  The list of hardware compatibility XP (or what was her last name) seems to have disappeared from microsoft.com, but the following information of theversion of Windows 7 is basically the same as it was for XP:

  The "Compatible" green check icon means the manufacturer of the device or software that this product works with 64-bit or 32-bit Windows 7. Generally, you won't need to do anything to ensure compatibility, and you will see "no action is needed" below "Compatible" on the product details page. However, if a manufacturer or Publisher offers or requires additional software or a newer version, you will find a link to what you need and see the details to the right of the link. Please note that these products have not been "Compatible with Windows 7" Logo program compatibility testing In addition, consult the manufacturer or the site of the Publisher for more information.

  "Compatible - Windows 7 Logo" means that this product meets requirements for compatibility with 64-bit and 32-bit Windows 7 from Microsoft. To get the "Compatible with Windows 7" logo, software and hardware must pass tests installation, performance, reliability, and security of Microsoft designed so you can be sure that these products are compatible with Windows 7.

  Almost always, if the manufacturer says that its product is "compatible with" a version of Windows, it is safe to install.

• "the software you are installing has been Windows logo testing to verify its compatibility with Windows XP."

  so I try to install the new itunes 10 on windows xp and I get this error, "the software you are installing has not passed Windows logo testing to verify its compatibility with Windows XP." "Continue your installation of the software may impair or destabilize the right operating system, either immediately or in the future." Microsoft strongly recommends that you stop this installation vender now and contact software for software that has passed Windows Logo test. "then why I get this error? and what should I do so that he can stop? I want to say I've never had this happens in their first versions... more it says its compatible with xp. so, once again, microsoft... why I get this error?

  Hey, Yes, I find the problem. do not install the update from the apple software. installation of apple.com it won't give you the error when downloading it on their actual location.

• HP pavilion dv6-3280 ca: compatibility with Windows 10

  Hello

  Just upgraded to Windows 10.

  Someone was able to install the drivers for "AMD Mobility HD 5000 Series"

  and "ATI Mobility HD 4200 Series"

  I get "Windows has stopped this device because it has reported problems. (Code 43) "for the AMD

  and "no driver installed" for the ATI card

  Thank you

  RJLX

  Hey @rjlx ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook dv6-3280 ca and problems with compatibility with Windows 10.

  If your computer is experiencing problems find and install updates of the operating system, try to use the Windows Update Troubleshooter to fix the problem.

  If this is not enough, you need to restore the laptop to a previous version of Windows.

  Thank you.

• Full compatibility with Win 8.1 C309a printer?

  I have no problem to install the drivers c309a using a Win 8.1 operating system that has all the undates installed, so I can print, however the software suite to operate other functions will not be installed.  When you use the latest version of the software of HP to win 8.1, it downloads and unzips but nothing after decompresses happen.  The Task Manager shows the configuration of the Installer (32-bit) HP running.  I left the Installer run for over an hour with no progress.  I repeated this process several times without success.

  I contacted HP and they told me the c309a printer is not totally compatibility with Win 8.1 in what all functions like the fax and scanning will not work.

  Also, I can see the printer installed from its address of sea.

  Is this correct?  Dose someone out there know the real story?

  Hello

  The HP Photosmart C309 is fully supported by Windows 8.1.

  Try following the steps below, and then reinstall the HP software and check any changes:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the Installer below and check differences:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109738-1&cc=us&DLC=en&LC=en&OS=4158&product=3737195&sw_lang=

  Please let me know if this is useful,
  Shlomi