ODI scenario scheduling is not executed for loading essbase
HelloI created a screenplay for one of my interfaces and to demand it.
I have selected the start and end options and mention the date and time.
In the enforcement section, I have selected every day and mentioned the time. But the interface is not running at the time. Please suggest what needs to be done
It will install the service with the settings you provide, even if you provide the wrong parameters as you did will always create the service.
See you soon
John
http://John-Goodwin.blogspot.com/
Tags: Business Intelligence
Similar Questions
-
ODI problem-Mail package not generated for essbase support
Hello
I have created a package that has a scenario tat loads data into essbase. I plugged this scenario to the ODISendmail object and when I run it it worked successfully and emails are generated. I have planned this scénarion one every hour. The scenario is get executed for every hour, but the mail does not work. But when it is executed with the package, he's running.If you have created a scenario for an interface the system will work is the interface and nothing else, if you create a scenario in a package, then it will run everything inside the package.
See you soon
John
http://John-Goodwin.blogspot.com/ -
When importing the scenario of the ODI, I get the warning message
Possible reason for failure analyze the above expression is the value of the empty parameter for ' #EDWH.v_company_id '.
Found variables undefined during treatment: #EDWH.v_company_id
followed by the error message
The classifier already contains an item with the same name
The tool failed with error ERROR_IMPORT code
My questions: do I have to set the missing variable by using the Javascript API file? If so, are there any samples available?
Can you the error message and the failure of the import be the consequence of the missing variable?
Thanks for any suggestions on how to proceed
Thank you for your response.
The error was a bug in the ODI old bridge to import.
By opting for the OEMM 12.2.1.0, which uses straight oracle odi sdk for importation, the problem disappeared.
-
IKM SQL for Hyperion Essbase (data)
I am trying to load data into essbase through the ODI interface however module "IKM SQL for Hyperion Essbase (data)".
Whenever data gets overwritten, how I accumulate this data during loading. As it is quite difficult for me to summarize the data, then load.
Kind regards
Amine ravi
Use a rule to load and set to add to the existing values in the State of charge, adjustable load rule name in the options of the IKM.
See you soon
John
-
ODI-conditional scheduling for a scenario
@
Hello
I have a conditional obligation plan a work/scenario in ODI
There is a scenario 1 - which must be scheduled to run every day at 06:00 except Sunday
Scenario 2 - which should be scheduled to run only on Sunday at 6:00
Scenario 1 should be scheduled to run on Sunday after scenario 2 is executed.
Can anyone suggest the best way to do it.
Any help or suggestion will be greatly appreciated.
Thanks and greetings
Reshma
Hello
For the first instance, as mentioned above, schedule the job for scenario 1 to run every day except Sunday.
Second case, where scenario1 must be performed after scenario 2 Sunday only.
Create a separate package, in which you add step 1 Scenario 2 then step 2 Scenario 1 time in a synchronous mode and generate a scenario (annex work for this scenario run only on Sunday)
or
Create a separate package, in which you add step 1 Scenario 2 then step 2 OdiwaitforChildSession, step 3 Scenario 1 and scenario (annex work for this scenario run only on Sunday)
In both cases the scenario 1 will be executed after the success of scenario 2.
Thank you.
-
Questions for ODI scenario as a webservice of the framework of Action of OBIEE
Hi gurus,
I did the web service configuration in ODI and OBIEE according the A-team link http://www.ateam-oracle.com/integrating-odi-with-obiee-how-to-invoke-odi-scenarios-load-plans-from-obiee/
The configuration is completed, however when I try to call an ODI of OBIEE scenario, he starts a session in ODI and - error with the message next-
java.lang.Exception: ODI-17546: specified variable not found in the repository: null
I tried to create a variable of the global model and passing by the service Web like Global.Dummy but still does not work.
Has anyone met with such a problem. Any help appreciated
The solution is-
(1) create a Dummy Global in ODI and used as a Start Up parameter variable in your package and generate the scenario
(2) place this dummy variable of the framework of Action of OBIEE when calling the service web - name - GLOBAL setting. MODEL / parameter value - model
OBIEE during the call to the web service ODI, passes a start setting to default ODI (which is undocumented).
-
ODI - SQL for Hyperion Essbase data loading
Hello
We have created a 'vision' in SQL Server that contains our data. The view currently has every year and periods of Jan 2011 to present. Each period is about 300 000 records. I want to only load one period at a time. For example may 2013. Currently we use ODBC through a rule of data loading, but the customer wants to use ODI to be compatible with the versions of dimension metadata. Here's the SQL on the view that works very well. Is there a way I can run this SQL in the ODI Interface so it pulls only what I declare in the Where clause? If yes where can I do it?
Select
CATEGORY, YEAR, LOCATION, SCRIPT, DEPT, PROJECT, EXPCODE, TIME, ACCOUNT, AMOUNT
Of
PS_LHI_HYP_PRJ_ACT
Where
YEAR > = "2013" AND PERIOD = 'MAY '.
ORDER BY CATEGORY ASC ASC FISCAL_YEAR, LOCATION ASC, ASC, ASC, ASC, ASC, PERIOD EXPCODE PROJECT DEPT SCENARIO CSA ACCOUNT CSA;
Hello
Simply use the following KM to load data - IKM SQL for Hyperion Essbase (DATA) - in an ODI interface that has the view that you created the Source model. You can add filters to the source which are dynamically by ODI variables to create the Where clause based on the month and year. Make sure you only specify a rule of load method to load the data into the KM
-
VLD-2794: TRUNCATE/INSERT loading Type is not allowed for outdoor...
Hello everyone!
I get the following error message when you try to validate a map. The error is:
VLD-2794: TRUNCATE/INSERT loading type not suitable for remote data target + 'tableName ' +.
Cannot execute truncate on a target of remote data. Change the type of loading for this target in INSERT or DELETE/INSERT.
The mapping is trying to extract data from a table source (Oracle 9.2) in a target (Oracle 10 g 2) table using a dblink. The target table, loading Type is set to "Truncate/Insert.
Any ideas?You can't run a command TRUNCATED through a link DB or any other DDL (CREATE, ALTER, DROP) statement.
You target table is available on DBlink and you can issue only DML (INSERT, UPDATE, DELETE, MERGE).
To truncate your target table, you must create the procedure as I said in previous post.
-
Windows is not able to load the selected for the following reason of backup set
Hello;
I did run a daily backup to a computer in a network with windows backup and Restore Center. the hard drive crashed on this computer and we had to install another. When I try and use advanced restore / backup made on a different computer, I can navigate to the backup on the network computer folder but when I select the folder and click Next it gives me an error:
I get: Windows is not able to load the backup game selected for the following reason:There is a problem with the backup catalog... 0x810000E5... restore from a different place...
Just to add additional information; The computer with the replaced hard drive running Vista family premium, the path to the backup file is \\HPDESKTOP\Public\Backup\Bobruncer-pc\.
There is another folder under Bobruncer-pc called Bobruncer-pc and all the backup files. I restore from the correct location? Also, the backup folder is 226 concerts but the backups were made from a hard drive of 80 GB... should I worry about this too?
Thank you
Dave
Hi Colt4t5,
Just to clarify, perform you a complete PC Backup or backup and restore?
When you do return, and restore, it can be saved as a .zip file in the backup folder. You can decompress the file and retrieve the required files.
Restore files from a backup
http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backupBack up and restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questionsI hope this helps.
Bindu S - Microsoft Support
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
-
The functionality Execute Disable No. run CPU is not enabled for this machine.
Hi all!
After my first installation of ESX 4.0.0 build 164009 on a HP Proliant BL680c G5 (2CPUs - 40 GB Mem), I get the usual screen with the HTTP host address and the stuff of Alt - F1 and Alt - F11, but at the bottom, in red, I get the following error:
TSC: cpu0:0 1246869) Init: 461: the CPU Execute Disable/No run function is not enabled for this machine.
I think I must change this setting somewhere in the BIOS, but I can find it. This BL was originally installed with W2k3-32-bit, which was pushed from an Altiris console. think the PSP usually "optimize" some parameters depending on the operating system must be installed.
All ideas
Hello
I would also enable the Intel-VT if it is not already in your BIOS. It is always very good check that your BIOS settings are correct for ESX. HP should have a white paper or documentation with the appropriate settings.
So far enable for Intel HP systems based on my list includes:
Intel VT
No execution
If YOU select an OS type select Windows NOT Linux.
Best regards
Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.virtualizationpractice.comvirtualization practical analyst [url]
"Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: securing the virtual environment ' [url]
Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
[url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url] -
Could not execute auto Check for DISPLAY
Aloha!
I am about to install 11 g R2 on OLE5 and I put the variable display using ' DISPLAY = < computer name >-: 0,0; Export DISPLAY '. When installing ".» / runInstaller "im having this error"Could not execute auto check for display... »
Can I cancel the mention of the above command?
Thanks for the help.
HadesSalvation;
Close your shell to reopen a new
Respect of
HELIOS -
LRM-00112: multiple values not allowed for the parameter 'control' - SQL Loader
Hello
Please can someone help me identify why the below SQL test charger does not work and I get the error in the subject header?
file CTL (load.ctl)
load data
INFILE 'C:\Documents and Documents\loader\TEST.csv c.
in the XXCPP table. SQL_LOADER_TEST
fields ended by ',' optionally surrounded "" "
(PERSON_ID, EMP_NAME, EMP_NUMBER)
command line prompt
sqlldr thompsos/generate control = log "C Documents\loader\load.ctl and Settings" = "C Documents\loader\load.log and Settings"
I obviously miss a key element of the code, but can't locate?
Thank you very muchSteveCPP wrote:
Through my PC which is where I realized the question. I need to save the file on the linux server and run it from there I guessWell, either you put the file on the server and execute sql * loader from the server OR you place the file on your local client and run sql * server of your local client (assuming you have locally installed Oracle client software).
;)
-
Issue of Apple load wire does not work for iPhone 5 c on iOS 9.2
Righit I bought an apple lightning problem to a usb cable and that is to say that it is not certified for my iPhone 5 c
so it will not charge I looked for things to do, but I'm not eager to jail break my phone
Help, please
There is no need to jailbreak your phone. Try using a different cable, this should help.
Also, try to use your cable with a different device. If this works, there may be something wrong with the port in your iPhone.
-
Your binary is not optimized for the iPhone 5, Application Loader, ERROR
I use flash builder 4.6, Air 18,0 on windows 7.
I receive the error.
Your binary is not optimized for the iPhone 5 - New iPhone apps and updates of application submitted must support 4 inches on the iPhone 5 and must include a launch image with the size-568 h modifier immediately following the < basename > the filename part of the launch image. The launch images must be PNG files and located at the top level of your package or provided in each .lproj folder if you locate your images of launch. Learn more about the iPhone support 5 and the app launch the images by reviewing the ' iOS Human Interface Guidelines' to 'https://developer.apple.com/library/ios/documentation/UserExperience/Conceptual/MobileHIG/ IconsImages/IconsImages.html#//apple_ref/doc/uid/TP40006556-CH14-SW5' and the 'iOS App Programming Guide' to 'https://developer.apple.com/library/ios/documentation/iPhone/Conceptual/iPhoneOSProgrammin gGuide/App-RelatedResources/App-RelatedResources.html#//apple_ref/doc/uid/TP40007072-CH6-W12 S'.
I packed all type of style, one by a [email protected] Default.png, Default-568h@2x~iPhone.png etc, but eror won't.
How to remove the error. I packed images and pictures on splashimage... one by one page by default.
Now I am confuse to be it's mistake or apple Air or my error of flash builder.
Please can you sat down.
regarding.
Naser.
[email protected] is the size of the requested file, and it must have dimensions of 640 x 1136.
Make sure that this file is included in your IPA in the top-level directory. A good way to check is to rename "myapp.ipa" to "myapp.zip" and unzip and look in the top level of the folder structure.
To get Flash Builder to include it in the IPA, place it in a folder that is included in your flash builder source tree (I use the "system" folder and make sure it is added separately to the project) and make sure that you have checked in the content area of the package:
Additionally, make sure that you have "copy the files not included in the output folder", checked on this screen:
Hope that helps!
-
After the download, the Version XI (11.0.08)
to
running and installation of _reader11_en_mssd_aaa_aih
I get ".
Adobe reader Setup error
key not valid for use in specified state
You use Windows 7, try google chrome and firefox browsers
report of the system that was created but could not send
Hey Geri,
Acrobat X does not support this platform. In some cases, the product works on unsupported platforms, but this probably isn't one of those cases.
http://www.Adobe.com/products/acrobatpro/tech-specs.html#x
Ben
Maybe you are looking for
-
iPhone delete playlist and all songs added to device... help!
Why has my camera deleted my playlist and all the songs added to the playlist?
-
Adding a second HDD had suspended the question
Hi all& nbsp;I installed my HARD drive I had in an enclosure that has failed. I have printer how to from the site Web HP etc. & nbsp; I plugged on the Sata 3 connector. I had once installed HARD drive and started the system hung right on the slash sc
-
ActiveSync connects via Bluetooth
I have just reactivated my cell phone after 2 years of no use because of an accident. I have always used ActiveSync to synchronize my Outlook on this pc to my phone. The phone is a Motorola MPX-220. The pc is a Windows XP Tablet. I recently downloade
-
Re installation of Microsoft office
I have a Home Office and student 2010 a family pack license for installation on three PC, if I wipe a pc and re install office, will I need to re activate and it will be counted as a third installation/activation, even if it's the same pc. (I install
-
Alerts 'Case' blackBerry Q10 mode.
One thing I always missed my 9790 past to my Q10 was the opportunity to enter a mode "case", where the unit vibrated and ring at the same time as specified in the configuration. Q10 recognizes when it is in the case, if it goes off the screen. I reme