Windows is not able to load the selected for the following reason of backup set

Similar Questions

• Windows computer not able to find the software adobe reader XI? I have tried repairing, did not

  Windows computer not able to find the software adobe reader XI? I have tried repairing, did not

  Hi Kenneth,

  Please try & download Adobe Reader using this link Adobe - Adobe Acrobat Reader DC Distribution.

  Let me know if the problem persists.

  Kind regards

  Nicos

• "When try to turn on my computer: Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid

  Original title: configuration of the CRA

  Hi, I got this message then try to turn on my computer:

  "Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid. "Please check the Windows documentation about the configuration option BOW and your reference manuals of the equipment for more information.

  can someone help me?

  Hi sugenghariyono,

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  ·         Are you able to boot to the desktop?

  Follow the steps in the article.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  For reference:

  Advanced Troubleshooting for General startup problems in Windows XP

• My computer when it is turned on will not past the blue screen of Windows Vista, not able to see the start with all the icons page

  Had to restart the computer and turned on will not go beyond Windows Vista of the screen blue, not able to see the start with all the icons page

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• I have portable printer HP Officejet 100 and I'm not able to load the driver BT software what is the problem?

  I'm not able to add the BT drivers, your help would be appreciated. Thank you

  You are welcome.

  Please follow the steps below to set up the Bluetooth connection:

  http://support.HP.com/us-en/document/c02652212

  If you do not have the installation CD, you can download the software below:

  http://ftp.HP.com/pub/softlib/software12/COL36711/bi-90383-2/OJ100ML411_Full_14_en.exe

  Please let me know of any problems, all available details (for example, specific error message unique behavior)

• Windows Vista not able to support the WPA2 wireless security problem

  Recently, I upgraded my router wireless to a Linksys 400N series N wireless router.  I use WPA Personal / RTK to authenticate and on all my XP and Vista machines, I was able to enter the security credentials and connect to the network. However, on a computer Windows Vista SP2 I be prompted to enter a field of login/password / username each time I try and connect to the network.  There must asking me my password and that's it.  This same card was working fine like WEP when I use my old wireless router.

  I deleted this adapter wireless network and sharing Center, ensured that the machine is part of the domain, uninstalled the wireless network card (which is also a Linksys product), assured the latest version of the driver and tried almost all the trouble shooting tips I can think.

  I've seen this identified as a problem in a few threads but no final resolution.  Any help/suggestions would be appreciated (no suggestion to buy a Mac tho!).

  Update:
  ----------
  Well well, after a diagnosis much more, I have determined that it is certainly a problem of Windows Vista.  If I plug a different adapter in the computer (which runs on a different computer), I get the same problem.  I was on the phone with Linksys for an hour and basically they have thrown in the towel and gave me an RMA for their card, though I doubt it will solve the problem.

  Is there some registry entry to set the type of authentication for a wireless adapter?  It seems that Vista keeps thinking it is the incorrect authentication mechanism.  Is it possible to 'fix' service wireless on Windows?

  Okay, I think that the real problem is that Windows Vista doesn't have the type of select WPA2 security (which is what the router broadcasts).  Is there a way to enter in this somehow?  It seems that Windows determines the types of security available according to the driver for the wireless card.  However, I use a Linksys Wireless-G USB Adapter (WUSBG54) and it says that it supports WPA (although I can't determine if it is only WPA or WPA2 as well).  In any case, hope this additional information helps all those who have a few cycles to provide some guidance.

  Hello

  WPA or WPA 2 encryption is actually supported by the wireless card that you have installed on the computer. As you only could use WPA earlier, it seems that the wireless network adapter supports only WPA and WPA 2 encryption key.

  Because the computer is in the domain, we recommend that you post your request here for more support options.
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads/

  I hope this helps.

  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows viewer not able to read the DNG format generated by camera Fujifilm X 30 of the RAF

  Hello. Since September, I have a problem. Until then, it had not occurred to me, but since then, when converting to DNG RAF files generated by my camera Fujifilm X 30, trying to visualize the viewer in Windows, it closes automatically.

  I also have a Nikon D7100 and generated the NAVE of Nikon, there is no problem. I have neither the conversion of the Fujifilm RAF generated through August 2015.

  The problem I've had so far with the Viewer Windows 7, and I have yet to upgrade to Windows 10.

  Please pray Adobe LR some techniques help me find a solution.

  Thank you.

  Hello

  I was able to view your DNG using the Windows on Windows 7 photo viewer. The first thing I did was to install the free DNG for Windows codec. A Setup program is located at the following link:

  Adobe DNG Codec: For Windows: Adobe DNG Codec 2.0

  Hope that helps,

  -Chris

• LR has started but not able to load the fotos

  Hello

  LR is my standard program for raw/nef images.

  I m able to start the program by clicking on the icon on the desktop.

  When I click on import a window opens with the message «The work of LR doesn´t more»

  and the close program. When I click on a nave that it opens and messages also comes

  immediately. PS6 works correctly. I have LR 5 and windows 8.1
  

  Thanks Matty

  The only suggestion I have would be to reinstall you Lightroom 5.71.

• XP Pro cannot see my Garmin GPS, not able to load the new software

  When I plug the device via the port USB port unit starts, and that's all. Cannot see it in my computer, or the files of the menu drop down.

  Hello

  1. were you able to use this device without any problem before?
  2 did you recent hardware or software changes to your computer before this problem?

  Try to update software for Garmin device.

  Reference: http://www.garmin.com/garmin/cms/site/us/support/

  See also the articles that might help you.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Troubleshooting Garmin, DeLorme or other third-party devices with Streets & Trips, MapPoint, or highway
  http://support.Microsoft.com/kb/952607
  GPS and your Windows XP laptop
  http://www.Microsoft.com/windowsxp/using/mobility/expert/ballew_03may27.mspx

• Not able to load the data into ODI

  Team,
  I get the error when I am trying to load some data from the Oracle source to the target Oracle table.
  SOure: I have col1 and target I row_wid, col1. For Row_wid I created the sequence and mapping is the other Col 2
  
  
  I get error during a stage, wherei captures the code:
  
  / * DETECTION_STRATEGY = NOT_EXISTS * /.
  
  insert into CONFIG_NBN_BIW. I _WC_EAM_STATUS_D $
  (
  STATUS_NAME,
  IND_UPDATE
  )
  Select
  STATUS_NAME,
  IND_UPDATE
  de)
  
  
  Select
  SEPARATE
  C1_STATUS_NAME STATUS_NAME,
  
  'I' IND_UPDATE
  
  of CONFIG_NBN_BIW. C$ _0WC_EAM_STATUS_D
  where (1 = 1)
  ) S
  If NOT EXISTS
  (select 1 from CONFIG_NBN_BIW. WC_EAM_STATUS_D T
  where T.ROW_WID = S.ROW_WID
  and ((T.STATUS_NAME = S.STATUS_NAME) or (T.STATUS_NAME IS NULL and S.STATUS_NAME IS NULL))
  )
  
  The above query fails with an error: ORA-00904: "S". "' ROW_WID ': invalid identifier.
  
  Since the S.ROW_WID in T.ROW_WID = S.ROW_WID is incorrect. IT is supposed to be T.ROW_WID = S.IND_UPDATE.
  
  Now, can someone tell me where exactly I'm incorrect in ODI. OR need additional information.
  
  Thank you

  Hello

  What is happening because you check the KEY field against the column is populated in a sequence.
  Uncheck this option, make sure you also UPDATE filed is also uncheck for that particular column.

  According to the request stuck by you, I think STATUS_NAME should be marked as KEY.

  Thank you
  Fati

• Not able to load the action as it is a PSD file.

  Good Mor Ning, Looking for help on getting a snowoverlayjj.psd loaded on my trial version of PS CC , I'm a PS beginner user, like download yesterday! I also bought a together decorative snow. The directions say go to stock then add the actions of atn, however it is a psd file and it won't give me this option. How do I get this on my dashboa

  Post edited by: Jitendra Khatwani

  Hello

  Greetings!

  Action must be a .atn file and not the PSD.

  Please check with the provider what exactly you bought, if it is an action, then then ask .atn file.

  After graduating, you can load this action in the Panel actions inside photoshop.

  Concerning

  Jitendra

• Wil Windows 7 does not start and is not able to solve the problem

  Hello

  I tried several things at this stage. I have a Toshiba that windows is not able to solve the problem on its own when starting. InsydeH20 BIOS, I have ensured that the system must start using the HARD disc as shown.

  When the problem started he said that the problem could have been caused due to a media device may have been connected to the computer and that Windows could not fix the problem automatically. I was then able to enter the menu to try to do a system restore; It did not work. From that moment, I opened windows to use the F8 key and was able to start using the corrupted files, but now after a update tried to install all I get is a black screen with a white line of underscore flashing in the top left of my screen.

  I downloaded an ISO file for Windows 7 from my other laptop and was able to boot from there to get to the point where I would be able to try a system restore, use the prompt, etc., but even once it is not solved the problem.
  At some point, the screen showed that there is a cable that is not connected or something, I don't not entered all of this, but I do not know how to check this part of it. Could someone please give me direction from here to what I can do?

  Thank you

  > However now after a tried update install all I get is a black screen with a white flashing line of underscores in the upper left corner of my screen.

  This is a typical symptom for a faulty HARD drive.
  I had the same cursor blinking in the upper left corner and finally I could solve this problem using the new HARD disk.

  > At some point, the screen showed that there is a cable that is not connected or something.
  Maybe you mean the error: pxe/e61: mediatest failure, check the cable of
  This happens if the portable computer is trying to boot from LAN. This happens because the OS on the HARD drive is not bootable, and this happens especially if the HARD drive is malfunctioning

  In my opinion, you need to change the HARD drive.
  I think this should solve the problem.

• You are able to load the plugin settings after that put 10.1.1 to level?

  After the last update of GB that I am not able to load the settings of plug-in via .pst files - they are greyed out in the standard dialog box - and they are still same after copy them in the standard folder (under /Music).

  I am able to save the new setting, but does not load them via the next-> load menu in the window of the specific plugin parameters.

  Any help/feedback would be apreciated! Thank you!

  -Claudio

  El Capitan 10.11.4

  After the last update of GB that I am not able to load the settings of plug-in via .pst files - they are greyed out in the standard dialog box - and they are still same after copy them in the standard folder (under /Music).

  What box are you using?

  I can open PST plug-in in the plug-ins pane in the Info of the smart control panel, for example to open a "Preset" Space Designer. And my plug-ins saved opens thus: for example:

  

  I saved my own preset as MyAmphitheaterExtrem.pst of ~/Music/Audio Music Apps/plug-in Settings/Space Designer / s 02.5 MyAmphitheaterExtrem.pst and copied pst two presets in Logic Pro X in the same folder.  Then I quit garageBAnd and recorded market and my saved preset appeared in Space Designer Panel, as well as logic copied presets.

• Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get the message when you set up a new user "a temporary user profile is loaded because Windows was not able to connect you with your local profile."

  Dear all,

  I have a Windows PC in my office. Because of some configuration issue, I deleted the domain user and tried to connect to the system with the same user credentials. It identify you with the credentials of the user, but I get a message saying: "a temporary user profile is loaded because Windows was not able to connect you with your local profile."
  This system is joined to the domain and the profile is an Active Directory user.
  Here are the details of the event ID:

  Details Product: Windows operating system Event ID: 1515 Source: Userenv Version: 5.2 Symbolic name: EVENT_PROFILE_DIR_BACKEDUP Message: Windows has backed up this user's profile. Windows will automatically try to use the saved profile the next time the user connects. Explanation A temporary user profile is loaded because Windows was unable to connect with your local profile. A possible cause of this is if your local profile has been corrupted or that you no longer have the correct privileges for profile records. Note: Any changes made to the temporary profile is lost once you disconnect. User action Search the profiles additional events in the event log for more information on the reason why this happened or contact the system administrator for further assistance.

  There is currently no article for this specific error Microsoft Knowledge Base or an event message. For more information on other technical support options, you can use to find answers online, see http://support.microsoft.com/default.aspx.

  Please, help me to create the same user profile in the system with formatting system.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/947215

  It will be useful.