OE_ORDER_PUB. Process_Order errors when adding a detail if one of the existing detail rows row is updated

Similar Questions

• NFS share for one (1) added when adding to a new host in the existing data center

  I'm sure it's a simple answer, but I've been beating my head on the wall, trying to find a solution. The scenario is as follows:

  1 Vcenter has several hosts in different groups. All built at the same time with a NFS share that is shared among all.

  2. I add a new host to the data center (I tried independently and also added to a cluster as well).

  3. the new host sees its local disk as a data store, as expected, but I have to add the shared NFS datastore.

  4. at the level of the host, I go to configuration-storage-add storage and the NFS share.

  It shows and normal with NFS (1) as the name. I can't rename it as it says THAT NFS already exist. I understand that there are in the vcenter DB, but how to add this new host or host an existing environment and maintain the name of the NFS share? vCenter 5.5, 5.5 esxi

  Thanks for your help

  Neil

  finally found the problem,

  the mounting data store I used FQDN.domain.com /Datashare

  I needed to use the FULL domain. DOMAIN.COM /Datashare

  Plugs in the name of area COMPLETE the variance in the symbolic name that caused the problem.

• Strange error when adding constraints

  Hi friends

  We are oracle runing 11.2.0.3.0, windows server.

  Only we don't have any problems on the 'source' scheme, which has been exported and imported to a new schema using DataPump and remap_schema. The same error occurs when using exp.exe

  Gives this error when adding some constraints, but not all, the Oracle returns a failure statemente:

  ORA-31685:object REF_CONSTRAINT type: NEW_SCHEMA. NOTE_ITEM_FK failed due to insufficient privileges. In the absence of sql is:

  ALTER TABLE NEW_SCHEMA. NOTE_ITEM_FINAL ADD CONSTRAINT NOTE_ITEM_FK FOREIGN KEY (CODID) REFERENCES NOTE ENABLE (ID)

  But I'm the owner of the table user, I DBA and all other privileges. We often but suddenly got this erros.

  Any idea?

  I have REFERENCES of the concession and many other roles and privileges at the trial, but nothing has worked.

  If I run the command via SQLPlus it returns me

  ORA-00604: an error occurred at recursive SQL level 1

  ORA-01031: insufficient privileges

  But I'm not referring to any other table schema, just mine.

  TKS a lot

  Well

  I found a solution

  RENAME TABLE to aaa_bkp aaa

  CREATE TABLE AS SELECT aaa * of aaa_bkp

  Re-create all triggers and constraints.

  It is, I think it was a good work around

  TKS all

• When you access the virtual machine, getting the error "encountered an error when you try to use one of its virtual hard disks". Help?

  I received the "low disk space error" on a hard drive of the virtual machine dynamic expanding. I have increased my space of virtual hard disk using "My Computer" > manage > storage > "Disk management" and choose "Attach VHD" then resizing to max available (64 GB), and now I can not start the virtual machine. It gives the error: encountered an error when you try to use one of its virtual hard disks. Help?

  Hi NatalieFoster,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 Virtual PC and XP Mode TechNet Forums

• After subscription and downloading and installing Acrobat DC, I can open it, but when I try to use one of the tools, I get the message that my trial has expired

  After subscription and downloading and installing Acrobat DC, I can open it, but when I try to use one of the tools, I get the message that my trial has expired.

  Can someone help me?

  Hello

  It is a problem of Activation, please follow the instructions at the link below, it should help solve the problem:

  Connect and disconnect activate Cloud Creative applications

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Let us know if that helps.

  Kind regards

  Bani

• Error when adding a partition to a view of materlialized

  Hello
  
  I get this error when you add a partition to a materialized view.
  
  ALTER MATERIALIZED VIEW mvedw statement. ADD PARTITION VALUES LESS THAN ('201304') MAR2013 MV_CLM_CAPITN_F
  *
  ERROR on line 1:
  
  ORA-14074: partition bound must gather greater than that of the last partition
  
  Please notify.
  
  Kind regards
  Narayan

  Well there you go - you already have this partition you want to add
  >
  MVEDW MV_CLM_CAPITN_F MAR2013 ' 201304'
  >
  Then why you try to do this?
  >
  ALTER MATERIALIZED VIEW mvedw statement. ADD PARTITION VALUES LESS THAN ('201304') MAR2013 MV_CLM_CAPITN_F
  >
  It is the SAME name of the partition and the value ('201304') in the list of partitions that you just posted.

  Maybe someone else added the partition when you weren't looking.

• First elements Timecode.cpp - 1014 error when adding media

  Software: First elements 11

  Camera: Sony DCR TRV22E

  OS: Windows 7

  When selecting Add multimedia elements, I get: [..-.. \Src\Timecode.cpp-1014] error several times, when the capture window finally arrives he says that the capture device is currently offline.

  This happens not only when the unit is plugged in and power but also when the camera is not connected.

  I tried different IEEE 1394 drivers available in windows 7 and none of them work.

  Host compatible OHCI 1394 controller

  Controller of compatible host OHCI 1394 (Legacy)

  VIA 1394 compatible OHCI Host Controller

  The connection to the camera via firewire is ok because I can download a video of him using Nero Essentials video, I can't do it through first elements 11.

  Post edited by: foradobeuse Oops, I put the incorrect error code in the title, it should be timecode.cpp - 1014

  I think I solved this problem.

  I have a number of external USB connected, for example, hard drives, webcams, mouse, keyboard etc., devices so I unplugged individual devices until I found that the Error 1014 is more appeared when adding media.  I plugged the other USB devices back in but kept the last disconnected device and can now add media from my miniDV via firewire.

  I don't think we can let off the hook here PE11, since I had no problems with USB so far and each capture freeware program that I tried did not have a video capture problem I had plugged in any USB device.

  Thanks to all who have contributed and I hope this helps other users faced with Error 1014, look at the number of points of view on this discussion after only a few days (~ 300) I don't think I was the only one.

• Get error when adding or deleting instance of a table row

  I'm absolutely brand new to LiveCycle ES2 (we were using Adobe Pro 7 until a week ago). I've been playing with some of our forms in an attempt to see what LiveCycle can do to update these in a format better.

  I have a table with a header line, a line of body and a footer line. The line of body must be reproducible. I used the custom object "subform Instance: insert delete move controls" to add the most and the sign less. I put the Action to repeat or delete the instance of this single line.

  The entire table is encapsulated in a subform that sank. The line that repeats is set to "repeat the line for each data item ' with Min County set to 1 and no Max count. The entire document is also wrapped in a subform, the value passed.

  When I go to preview and click the Add button of the Instance, I get this error:

  «WARNING: JavaScript Window - element insertion.»

  You have reached the maximum number of items allowed. »

  If I try to remove it an Instance button, I get a similar error on the minimum number of items allowed.

  BUT (and here the confusion belongs) the buttons work! The line is added or deleted, it gives me just the error first. What could happen? I tried affecting count Max 20 to see if giving it a number max can help, but I still get the error.

  I have it all done by using Design view, because I don't know anything about JavaScript, but I can post the generated code, if it helps.

  Hmm ok, the script of Action Builder is very overloaded, do not know what is causing the error.

  My suggestion:

  1. remove all the actions that you created with the constructor of the action

  2. for the button Add use this JavaScript in the click event

  Table._TableRow.addInstance (1);

  3. to remove button this JavaScript (will remove always the last instance of the line)

  If (Table._TableRow.count > 1) {}

  Table._TableRow.removeInstance (Table._TableRow.count - 1);

  }

• Error when adding new subnet for CSM group

  Hello

  I'm trying to add a new subnet to an existing group in the CSM v4.0.1 b7823 company.  When you add a new subnet to the Group (the other elements of the group is a different subnet), CSM emits several errors for each SAA touched:

  Description:

  BB (GROUPNAME), referenced by the 'Http network' on maps (DEVICENAME) device to multiple network IP addresses!

  Cause:

  Made http refers to a network object that corresponds to more than one IP address on the device

  Action:

  Please config the policy with the network object that resolves to a single IP address.

  There is an error for ICMP as well.  The group is already a /24subnet content, I don't think it's a clear mistake.  Has anyone encounter this?

  Thank you very much.

  Justin

  Hi Justin,

  what you observe is normal given the way in which we have set up the remote access policy. As you probably know, in cli, you can specify only one rule of access by line for ssh, http, telnet etc...

  For example, if you want to allow ssh access to ASA lines host 1.1.1.1 and 2.2.2.2 you put two

  SSH 2.2.2.2 255.255.255.255 outside

  SSH 1.1.1.1 255.255.255.255 outside

  The CSM, we model this two lines as two different object, so the building of network type block object that refers to the object of type ssh access can have only one entry. This behavior is the same for ICMP as well.

  Access list is different because we model to the CSM in a different way, plus you can use the object-group put on different networks. It is not possible to access to the device.

  I hope that gave you an overview a little more on the reason

  Also it would be nice to score this answer if this is the case

  Stefano

• Error when adding a new section with SQL in application websheet

  Get the following error while adding a new section with inside on an existing page SQL query in websheet request.

  ()This is the first time I tried to add a SQL query to an article in a websheet. Is that suppose to work?)
  
  

  

  You can see that access SQL and PL/SQL is already enabled for this application websheet.

  
  

  

  After trying many things, I found the 'access SQL and PL/SQL' must be enabled at the level of the APEX INSTANCE also.

  This is how to do it:

  (1) connect APEX as a forum admin with the following credentials:

  workspace: internal

  user ID: admin id defined during the installation of the apex (usually, it will be admin only)

  password: admin password set during the installation of the apex

  2) click manage the Instance > feature Configuration

  (3) select Yes to enable access SQL in Websheets

  

• Error when creating a new DAC connection using the MSSQL connection type

  Hello
  
  I am trying to create a connection DAC, i.e. a new repository DAC in the SQL Server 2008 database.
  Version of the DAC: 10.1.3.4.1
  Database: SQL Server 2008
  
  
  I downloaded from the link below sqljdbc4.jar file and placed it in the D:\orahome\10gR3_1\bifoundation\dac\lib folder.
  [http://www.microsoft.com/en-us/download/details.aspx?displaylang=en & id = 11774]
  
  I entered all the details correctly to the name of the database, the database host, port of the database. I created a new file for authentication.
  
  I get error when I try to test the connection below.
  
  Driver MESSAGE: MSSQL not available!
  CLASS EXCEPTION: java.lang.IllegalArgumentException
  
  com.siebel.etl.gui.login.LoginDataHandler$ LoginStructure.testConnection (LoginDataHandler.java:512)
  com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
  com.siebel.etl.gui.login.ConnectionTestDialog$ Executor.run (ConnectionTestDialog.java:290)
  
  : CAUSE:
  MESSAGE: com. Microsoft.SqlServer.JDBC.SQLServerDriver
  EXCEPTION CLASS: java.lang.ClassNotFoundException
  
  java.net.URLClassLoader$ 1.run(URLClassLoader.java:200)
  java.security.AccessController.doPrivileged (Native Method)
  java.net.URLClassLoader.findClass(URLClassLoader.java:188)
  java.lang.ClassLoader.loadClass(ClassLoader.java:306)
  Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:276)
  java.lang.ClassLoader.loadClass(ClassLoader.java:251)
  java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
  java.lang.Class.forName0 (Native Method)
  java.lang.Class.forName(Class.java:169)
  com.siebel.etl.gui.login.LoginDataHandler$ LoginStructure.testConnection (LoginDataHandler.java:510)
  com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
  com.siebel.etl.gui.login.ConnectionTestDialog$ Executor.run (ConnectionTestDialog.java:290)
  
  
  The error seems to be a problem of connectivity to SQL Server. I use the correct jar file?
  
  Please, help me to solve this problem. Appreciate the help given on this forum earlier.
  
  Thank you

  Add
  .\lib\sqljdbc4.jar
  at the end of the line beginning with SQLSERVERLIB in the file config.bat

  Pls correct brand

• ICE30 errors when compiling a WiX project and including the mstudiocommon.2010.msm

  Hello

  I am trying to create an msi using WiX for a project using the mergw VISA modules that come with VISA 5.3, that I installed it under the IEEE 488.2 package. mstudiovisa.2010.msm requires mstudiocommon.2010.msm. When I include them in the project file (.wxs). the compiler produces errors such as below (partial list)...

  I only get errors when using MSM in a Visual Studio installed the project.

  Any suggestions for a fix would be greatly appreciated.

  Thank you

  David

  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 1.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__016BDF7D90874798B4BE0BDA0C05A49A.039160C5A7A24C49AD122694436A47BB' and 'C__2E0318AAB2BF4B7189A8CF21FD7185BC.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.

  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 1.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__016BDF7D90874798B4BE0BDA0C05A49A.039160C5A7A24C49AD122694436A47BB' and 'C__2E0318AAB2BF4B7189A8CF21FD7185BC.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 1.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__016BDF7D90874798B4BE0BDA0C05A49A.039160C5A7A24C49AD122694436A47BB' and 'C__46B6CB4FBD354C73B7A67EE8D9DA4361.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 1.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__016BDF7D90874798B4BE0BDA0C05A49A.039160C5A7A24C49AD122694436A47BB' and 'C__46B6CB4FBD354C73B7A67EE8D9DA4361.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 2.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__2E0318AAB2BF4B7189A8CF21FD7185BC.039160C5A7A24C49AD122694436A47BB' and 'C__46B6CB4FBD354C73B7A67EE8D9DA4361.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 2.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__2E0318AAB2BF4B7189A8CF21FD7185BC.039160C5A7A24C49AD122694436A47BB' and 'C__46B6CB4FBD354C73B7A67EE8D9DA4361.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 1.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__016BDF7D90874798B4BE0BDA0C05A49A.039160C5A7A24C49AD122694436A47BB' and 'C__63DA4DFA08B847EBBE9EA67DDFA881CD.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 1.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__016BDF7D90874798B4BE0BDA0C05A49A.039160C5A7A24C49AD122694436A47BB' and 'C__63DA4DFA08B847EBBE9EA67DDFA881CD.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 2.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__2E0318AAB2BF4B7189A8CF21FD7185BC.039160C5A7A24C49AD122694436A47BB' and 'C__63DA4DFA08B847EBBE9EA67DDFA881CD.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 2.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__2E0318AAB2BF4B7189A8CF21FD7185BC.039160C5A7A24C49AD122694436A47BB' and 'C__63DA4DFA08B847EBBE9EA67DDFA881CD.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 5.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__46B6CB4FBD354C73B7A67EE8D9DA4361.039160C5A7A24C49AD122694436A47BB' and 'C__63DA4DFA08B847EBBE9EA67DDFA881CD.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 5.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__46B6CB4FBD354C73B7A67EE8D9DA4361.039160C5A7A24C49AD122694436A47BB' and 'C__63DA4DFA08B847EBBE9EA67DDFA881CD.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 6.CON | NationalInstruments.Common.config "is installed by two different components on a LFN system in" [TARGETDIR] \Visa Tester\ ': 'C__4DCFB2C5FC44400BA4B4CA245390C113.039160C5A7A24C49AD122694436A47BB' and 'C__78B0A59F2E584CB48B2993A61B055DC3.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 6.CON | NationalInstruments.Common.config "is installed by two different components on a LFN system in" [TARGETDIR] \Visa Tester\ ': 'C__4DCFB2C5FC44400BA4B4CA245390C113.039160C5A7A24C49AD122694436A47BB' and 'C__78B0A59F2E584CB48B2993A61B055DC3.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 6.CON | NationalInstruments.Common.config "is installed by two different components on a LFN system in" [TARGETDIR] \Visa Tester\ ': 'C__4DCFB2C5FC44400BA4B4CA245390C113.039160C5A7A24C49AD122694436A47BB' and 'C__84BBDA9D53784C71992935FBA4FA4021.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.

  Hi David,

  The WiX project example that I'm talking about is installed by Measurement Studio to "C:\Users\Public\Documents\National Instruments\MStudioVS2012\DotNET\Examples\Application\Deployment\WiX\All Libraries". However, this example only supports Measurement Studio libraries. We are finalizing some examples that support the material libraries, 488.2 and VISA, DAQmx. I'll post a link these here when they are published. But in the meantime, I have attached the current version of the examples that are close to final.

  For the dependencies required for a distribution list, you can consult the help topic of Studio measure measure Studio Modules merger and deployment files.

• Taskmgr.exe does not work. error when you run gpedit.msc: "one or more activex controls could not be displayed either...". "- old deleted restore points.

  Dear all, Hello, hope you are doing well.

  
  

  My thinkpad t42 machine with xp sp3 OEM has a problem, unfortunately.

  Task Manager is not running.  A small timer appears when ctrl + alt + delete is pressed. nothing happens.  Taskmgr.exe fact exists in the system folder.  This has been verified.  The same thing happens when you try to start the program via a double-click; nothing.

  When checking to see that the Task Manager was not blocked under the administrator account, there was an error in the gpedit.msc program - namely:

  internet Explorer: "(one or more ActiveX controls could not be displayed because either (1) your current internet security settings prohibit running ActiveX controls on this page, or 2) you blocked an editor of one of the controls." As a result this page may not display correctly. "It is a double popup as well.  When you press ok, the same error message box appears again.  Reset all settings of security of IE8.  Made no difference.

  the same error message is produced with the software lenovo "thinkpad update" - once again in the framework-

  
  
  

  Someone (not me) downloaded a program called "personal internet security ' on the machine and also a"registry fix"program that has an icon of similar colors to the windows logo icon, but the colors were reversed (the name of it escapes me) - these programs pourrait the root of the problems and why the machine does well.

  To solve; First, Avast has been run on boot to the top, and about 8 programs have been removed.  (Some of these programs may have been dependent on or related to another...)

  Then, microsoft's free antivirus has been downloaded - but - it wouldn't install, giving a general error.  The same error was given, for Microsoft security program, when Avast was uninstalled.

  A Microsoft security scan is run from the Web site then, and he says that the computer is virus free, even if it has changed some previous registry changes.

  To fix the Task Manager, difficulty in registration of Microsoft was found to be proposed here -http://support.microsoft.com/kb/907343 - but then there was a '0' already in the field.

  Having become frustrated with all hacking around records etc, it was decided to go to an older Restore Point.  The last of them visible was in December, and it would not actually go to these old restore points.  The error said: Please try a different restore point.  Having received updates xp at the same time to that, these restore Points have unfortunately disappeared and no restore points exist where the system is stable.

  If someone like me that the machine still has something?

  If someone could suggest a solution for me that would be great and would really make my life less busy in trying to solve this problem - my area of expertese is certainly not it if someone could help me it would be very much appreciated...

  Sincerely,

  D

  The process of deletion for Personal Internet Security 2011 is well documented.

  It is not some ' try it or try things "and see if it works the kind of process.

  You won't fix with Avast, and a large number of malware just laugh at all Microsoft malware detection and removal products.  There is little to fear Microsoft analysis tools.  I can get my system on purpose infected two dozen ways and Microsoft will tell me that there is no problem.

  Removal and detection of malicious software is not Microsoft expertise area.  There are businesses where malware detection and removal, it is their area of expertise, and that's all they do throughout the day, so you better stick with them for the easy stuff.

  You will not fix your system and try things or any amount of piracy.  It will fix you knowing what you're doing and using methods that other people have already understood by the practice and the real real world situations.

  If you want to remove it and do not have to reinstall your XP, you should consider going to a forum where malware removal experts hang out.  You know... people who really know how to actually remove the stuff and did it successfully.

  This means that people have got their systems infected by the malware on goal several times and practical detached until they understand the malware and how it works well enough to write a removal procedure.  They did try them all things for you.

  You can mess around with other things to try that perhaps sometimes could work, or you can follow the procedure who already figured that will work all the time.

  If you faithfully follow the removal instructions and you still have questions, there is link at the bottom of the instructions for further help.  Although everything that has already happened or attempted to apply may have complicated your situation beyond the reasonable expectations of repair.

  Here is the link with the instructions to get started:

  http://www.bleepingcomputer.com/virus-removal/remove-personal-Internet-Security-2011

  It's my contention that, once your system gets afflicted by malware of this magnitude, you should not trust any of current Restore Point.  When finished remove malicious software, all your Restore Points are not trustworthy and you must knock out all and start over with new Restore Points.

  If you want to get your task manager will, navigate to c:\windows\system32 and make a taskmgr.exe and call the copy something like jose.exe.

  Then you will be able to launch jose.exe (double click), and the Task Manager opens.  The malware will not allow taskmgr.exe to be a running process, because he knows that's what you use to try to remove it.  So far, malware knows no jose.exe (this may change).

  You will probably like Process Explorer better when even when you get the hang of it, but you can get your task manager go.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Error when, with audio streaming via HTTP to the Simulator

  I use JDE 4.7 and 8900 Simulator.  I'm trying to listen to an MP3 via http to a blackberry app.  When you use the BufferedPlayBack example screen, I get the following error when the data source is trying to open the connection - "net.rim.device.cldc.io.dns.DNSException: error trying to solve.

  When I enter the same URL in the BlackBerry browser on the Simulator, I get the following error: "the selected server returned an error when you try to respond to your request.

  When I enter the same URL in my web browser in my PC, I am able to stream audio and play with QuickTime.

  Why I get this DNSException on the BB and not on my local PC?  The web engine runs also locally.  I know that the BB Simulator does not support rstp.  The Simulator also not does support streaming over http?

  This is the URL I used:

  http://myLocalMachine:8080/myMusic/anAudio.MP3;deviceside=true

  Thanks in advance!

  T

  I found a solution to the question in the thread below.  I increased the connection. MaxNumberOfKBytesToSend = 10240 in the... File MDS\config\rimpublic. Property and so was able to sucessfully stream mp3 to my request.

  http://supportforums.BlackBerry.com/T5/Java-development/increase-MDS-CS-limit-on-http-download-size/...

• Error when performing procedure a TOAD that contains the parameter and dblink

  Hi all
  I get the error while executing the following code in the TOAD and APEX.
  
  It contains the parameter (start_date and end_date) and dblink (@TO_FUT).
  When I hardcode the values of the parameters, it works very well.
  When I give values hard-coded in the procedure, the error comes.
  When I commented that the lines as much as setting comes, the error always comes.
  
  I don't know if it's parameter problem or question dblink or some other problem
  
  Everyone is having no idea about this error?
  Your help is very appreciated.
  
  Code:
  CREATE OR REPLACE PROCEDURE PROC_ENR_ACC (START_DATE, END_DATE DATE DATE)
  AS
  BEGIN
  RUN IMMEDIATELY 'TRUNCATE TABLE OUTPUT_TABLE;
  INSERT INTO OUTPUT_TABLE
  (FIRST_NAME, LAST_NAME, HIDDEN, EFF_DT, CID, PLAN, FLAG)
  SELECT
  TEMP1. FIRST NAME,
  TEMP1. LAST_NAME,
  TEMP1. HIDDEN,
  TEMP1. EFF_DT,
  TEMP1. CID,
  TEMP1. PLAN,
  NVL ((SELECT ' Y'))
  OF FADMIN. MEMI_TABLE@TO_FUT MCQUEEN
  WHERE MCQUEEN. MEME_CK = TEMP1. MEME_CK
  AND MCQUEEN. TXN_EFF_DT = TEMP1. EFF_DT
  AND MCQUEEN. PBP = TEMP1. PLAN
  AND MCQUEEN. MEMI_TXN_CD IN ('AC', ARE ')
  AND MCQUEEN. MEMI_SEQ_NO = (SELECT MAX (MI. MEMI_SEQ_NO)
  OF FADMIN. MEMI_TABLE@TO_FUT MI
  WHERE MI. MEME_CK = MOUGEOT. MEME_CK
  AND MI. TXN_EFF_DT = MOUGEOT. TXN_EFF_DT
  AND MI. PBP = MOUGEOT. PBP
  AND MI. MEMI_TXN_CD IN ('AC', ARE ')
  AND MI. (MEMI_INTF_STS = 03)), 'N') AS FLAG
  Of
  (SELECT
  M1. FIRST NAME,
  M1. LAST_NAME,
  M1. HIDDEN,
  M1. EFF_DT,
  M1. CID,
  M1. PLAN,
  (SELECT THE SAME. MEME_CK
  OF FADMIN. EVEN MEME_TABLE@TO_FUT, FADMIN. GRGR_TABLE@TO_FUT CHRISTIAN
  WHERE EVEN. M_HIN = M1. HID
  AND EVEN. GRGR_CK = CHRISTIAN. GRGR_CK
  AND CHRISTIAN. GRGR_ID = M1. GRGR_ID
  ) AS MEME_CK
  OF FADMIN. METR_TABLE@TO_FUT M1,
  (SELECT M3. HIDDEN, M3. FADMIN EFF_DT. METR_TABLE@TO_FUT M3
  WHERE M3. TYPE IN ('60 ', ' 61')
  AND M3. RESPONSE TO ('117 ', ' 118')
  AND TRUNC (M3. METR_TRANS_DT) BETWEEN START_DATE AND END_DATE
  AND M3. SYIN_INST = (SELECT MAX (M4. SYIN_INST)
  OF FADMIN. METR_TABLE@TO_FUT M4
  WHERE M4. HID = M3. HID
  AND M4. TYPE IN ('60 ', ' 61')
  AND M4. RESPONSE TO ('117 ', ' 118')
  AND TRUNC (M4. EFF_DT) = TRUNC (M3. EFF_DT))
  ) TEMP
  WHERE M1. TYPE IN ('60 ', ' 61')
  AND M1. RESPONSE = "011"
  AND TRUNC (M1. METR_TRANS_DT) BETWEEN START_DATE AND END_DATE
  AND M1. SYIN_INST = (SELECT MAX (M2. SYIN_INST)
  OF FADMIN. METR_TABLE@TO_FUT M2
  WHERE M2. HID = M1. HID
  AND M2. TYPE IN ('60 ', ' 61')
  AND M2. RESPONSE = "011"
  AND TRUNC (M2. EFF_DT) = TRUNC (M1. EFF_DT))
  AND M1. HID = TEMP. HID (+)
  AND M1. EFF_DT = TEMP. EFF_DT (+)
  AND TEMP. HIDDEN IS NULL
  --------
  UNION
  --------
  SELECT
  M1. FIRST NAME,
  M1. LAST_NAME,
  M1. HIDDEN,
  M1. EFF_DT,
  M1. CID,
  M1. PLAN,
  (SELECT THE SAME. MEME_CK
  OF FADMIN. EVEN MEME_TABLE@TO_FUT, FADMIN. GRGR_TABLE@TO_FUT CHRISTIAN
  WHERE EVEN. M_HIN = M1. HID
  AND EVEN. GRGR_CK = CHRISTIAN. GRGR_CK
  AND CHRISTIAN. GRGR_ID = M1. GRGR_ID
  ) AS MEME_CK
  
  OF FADMIN. METR_TABLE@TO_FUT M1
  WHERE M1. TYPE IN ('60 ', ' 61')
  AND M1. RESPONSE TO ('016', '017', '022', ' 023')
  AND TRUNC (M1. METR_TRANS_DT) BETWEEN START_DATE AND END_DATE
  AND M1. SYIN_INST = (SELECT MAX (M2. SYIN_INST)
  OF FADMIN. METR_TABLE@TO_FUT M2
  WHERE M2. HID = M1. HID
  AND M2. TYPE IN ('60 ', ' 61')
  AND M2. RESPONSE TO ('016', '017', '022', ' 023')
  AND TRUNC (M2. EFF_DT) = TRUNC (M1. EFF_DT))
  ) TEMP1;
  END;
  /
  
  The error:
  ORA-00918: column ambiguously defined
  ORA-02063: preceding the line of TO_FUT
  ORA-06512: at "PROC_ENR_ACC", line 5
  ORA-06512: at line 5

  Good,

  Please can just as a test you try this and see what happens

  WITH variables AS
  (SELECT /*+ MATERIALIZE */
          TO_DATE(:START_DATE) start_date,
          TO_DATE(:END_DATE) end_date
   FROM dual)
      SELECT   TEMP1.FIRST_NAME,
              TEMP1.LAST_NAME,
              TEMP1.HID,
              TEMP1.EFF_DT,
              TEMP1.CID,
              TEMP1.PLAN,
              NVL (
                   (SELECT   'Y'
                    FROM   MEMI_TABLE MEMI
                    WHERE       MEMI.MEME_CK = TEMP1.MEME_CK
                    AND MEMI.TXN_EFF_DT = TEMP1.EFF_DT
                    AND MEMI.PBP = TEMP1.PLAN
                    AND MEMI.MEMI_TXN_CD IN ('AC', 'RE')
                    AND MEMI.MEMI_SEQ_NO = (SELECT   MAX (MI.MEMI_SEQ_NO)
                                            FROM   MEMI_TABLE MI
                                            WHERE   MI.MEME_CK = MEMI.MEME_CK
                                            AND MI.TXN_EFF_DT = MEMI.TXN_EFF_DT
                                            AND MI.PBP = MEMI.PBP
                                            AND MI.MEMI_TXN_CD IN ('AC', 'RE')
                                            AND MI.MEMI_INTF_STS = 03)
                    ),'N') FLAG
     FROM (SELECT   M1.FIRST_NAME,
                    M1.LAST_NAME,
                    M1.HID,
                    M1.EFF_DT,
                    M1.CID,
                    M1.PLAN,
                    (SELECT   MEME.MEME_CK
                     FROM   MEME_TABLE MEME, GRGR_TABLE GRGR
                     WHERE       MEME.M_HIN = M1.HID
                     AND MEME.GRGR_CK = GRGR.GRGR_CK
                     AND GRGR.GRGR_ID = M1.GRGR_ID) MEME_CK
           FROM   METR_TABLE M1,
                  (SELECT   M3.HID, M3.EFF_DT
                   FROM   METR_TABLE M3
                   WHERE   M3.TYPE IN ('60', '61')
                   AND M3.REPLY IN ('117', '118')
                   AND TRUNC (M3.METR_TRANS_DT) BETWEEN (SELECT start_date FROM variables) AND  (SELECT end_date FROM variables)
                   AND M3.SYIN_INST = (SELECT   MAX (M4.SYIN_INST)
                                       FROM   METR_TABLE M4
                                       WHERE   M4.HID = M3.HID
                                       AND M4.TYPE IN ('60', '61')
                                       AND M4.REPLY IN ('117', '118')
                                       AND TRUNC (M4.EFF_DT) = TRUNC (M3.EFF_DT))
                   ) TEMP
           WHERE   M1.TYPE IN ('60', '61') AND M1.REPLY = '011'
           AND TRUNC (M1.METR_TRANS_DT) BETWEEN (SELECT start_date FROM variables) AND  (SELECT end_date FROM variables)
           AND M1.SYIN_INST = (SELECT   MAX (M2.SYIN_INST)
                               FROM   METR_TABLE M2
                               WHERE       M2.HID = M1.HID
                               AND M2.TYPE IN ('60', '61')
                               AND M2.REPLY = '011'
                               AND TRUNC (M2.EFF_DT) = TRUNC (M1.EFF_DT))
          AND M1.HID = TEMP.HID(+)
          AND M1.EFF_DT = TEMP.EFF_DT(+)
          AND TEMP.HID IS NULL
          UNION
          SELECT   M1.FIRST_NAME,
                   M1.LAST_NAME,
                   M1.HID,
                   M1.EFF_DT,
                   M1.CID,
                   M1.PLAN,
                   (SELECT   MEME.MEME_CK
                    FROM   MEME_TABLE MEME, GRGR_TABLE GRGR
                    WHERE       MEME.M_HIN = M1.HID
                    AND MEME.GRGR_CK = GRGR.GRGR_CK
                    AND GRGR.GRGR_ID = M1.GRGR_ID) MEME_CK
          FROM   METR_TABLE M1
          WHERE   M1.TYPE IN ('60', '61')
          AND M1.REPLY IN ('016', '017', '022', '023')
          AND TRUNC (M1.METR_TRANS_DT) BETWEEN (SELECT start_date FROM variables) AND  (SELECT end_date FROM variables)
          AND M1.SYIN_INST = (SELECT   MAX (M2.SYIN_INST)
                              FROM   METR_TABLE M2
                              WHERE   M2.HID = M1.HID
                              AND M2.TYPE IN ('60', '61')
                              AND M2.REPLY IN ('016', '017', '022', '023')
                              AND TRUNC (M2.EFF_DT) = TRUNC (M1.EFF_DT))
          ) TEMP1;
  END;
  

  See you soon

  Ben
  http://www.munkyben.WordPress.com
  Don't forget to mark the answers useful or correct ;)