Error when adding a new section with SQL in application websheet

Similar Questions

• error when adding a new collar with control constriant

  Hello
  
  I tried to add a new column with a check constraint, but giving error correct me please...
  

  drop table testchk
  
  create table testchk(typenm varchar2(5))
  
  insert into testchk values('mon')
  
  alter table testchk add typechk varchar2(5) default 'both' constraint chk_test check(typechk in('m','d') and typechk is not null)

  For the altar command getting the ORA-02293 impossible to validate the error...
  
  I don't want to create any other constriant as non-null, etc... but need to check only a single constriant
  
  Thank you

  The problem is with the default

  Try this

  drop table testchk

  create table testchk (typenm varchar2 (5))

  insert into testchk values ('my')

  ALTER table testchk add typechk varchar2 (5) default'm ' check constraint chk_test (typechk in('m','d') and typechk is not null)

• Strange error when adding constraints

  Hi friends

  We are oracle runing 11.2.0.3.0, windows server.

  Only we don't have any problems on the 'source' scheme, which has been exported and imported to a new schema using DataPump and remap_schema. The same error occurs when using exp.exe

  Gives this error when adding some constraints, but not all, the Oracle returns a failure statemente:

  ORA-31685:object REF_CONSTRAINT type: NEW_SCHEMA. NOTE_ITEM_FK failed due to insufficient privileges. In the absence of sql is:

  ALTER TABLE NEW_SCHEMA. NOTE_ITEM_FINAL ADD CONSTRAINT NOTE_ITEM_FK FOREIGN KEY (CODID) REFERENCES NOTE ENABLE (ID)

  But I'm the owner of the table user, I DBA and all other privileges. We often but suddenly got this erros.

  Any idea?

  I have REFERENCES of the concession and many other roles and privileges at the trial, but nothing has worked.

  If I run the command via SQLPlus it returns me

  ORA-00604: an error occurred at recursive SQL level 1

  ORA-01031: insufficient privileges

  But I'm not referring to any other table schema, just mine.

  TKS a lot

  Well

  I found a solution

  RENAME TABLE to aaa_bkp aaa

  CREATE TABLE AS SELECT aaa * of aaa_bkp

  Re-create all triggers and constraints.

  It is, I think it was a good work around

  TKS all

• oracle.jbo.RowCreateException: Houston-25017: error when creating a new entity.

  Hi all
  
  I get the following error when executing the Page create purchase orders. I extended the standard EntityObject class: Purchase Order Header to my EO custom, make one here to this EO origin.
  oracle.jbo.RowCreateException: Houston-25017: error when creating a new entity for CustomPurchaseOrderHeaderEO line
  
  Thank you

  Hi SumitSharma,

  Added the following line to the file Extended Entity Object.xml
  "DefClass ="oracle.apps.fnd.framework.server.OAEntityDefImpl"xx.oracle.apps"below the RowClass ="... "package line.

  This solved my error, but I can't do it this way is fair or unfair suggestions.

  Thank you

  Published by: 995022 on May 14, 2013 22:13

• New to OAF - oracle.jbo.RowCreateException: Houston-25017: error when creating a new entity for HeaderTableEO line

  Hi I'm new to OFA. I am trying to create a master-details form based on the example given on Youtube (but using my own paintings).

  I have already defined in table colums.

  AM code is as follows:

  Public Sub CreateEmailHdrRow()

  {

  xxVmmcSendEmailDefHdrVOImpl vo = getxxVmmcSendEmailDefHdrVO1();

  String s = "Test";

  Line = vo.createRow ();

  If (!) VO.isPreparedForExecution ())

  {

  vo.setMaxFetchSize (0);

  }

  row.setAttribute ("EmailDefName", s);

  row.setNewRowState (Row.STATUS_INITIALIZED);

  }

  When I run, the error occurs at the level of line (rank rank = vo.createRow ();)

  Error message: oracle.jbo.RowCreateException: Houston-25017: error when creating a new entity for xxVmmcSendEmailDefHdrEO line.

  Any help is appreciated.

  Anjan,

  Please check that the type of the CreatedBy attribute is a number representing the id in FND_USER and not the actual text of the name of the user. Standard Oracle columns that use a number for this value not varchar.

  Kristofer Cruz

• HRSSA - error when using details of FYI with new Notification hire

  
  We are 12.1.3 implmenting HRSSA (Manager Self Service) and are a problem, try to use the parameter of FYI details with the new hiring process in Manager Self Service.  Currently, I have a beautiful SR with Oracle, but I was wondering if someone could give me advice on what else to try.  I put the & pNtfFyiDetails = Y in the function HR_NEW_HIRE_MGR_SS and it causes an error.  We have no problem with the change of status of worker using the FYI notification details, it normally ends and sends details of FYI in email notification.

  I put the parameter in the HR_NEW_HIRE_MGR_SS se and then also added to the HR_NEW_HIRE_MGR function.  I did a search on the internet and found a post where the answer has been added to these two functions.  He mistakes so be it.  Enamel is actually ever sent to the recipient FYI and the notification in the worklist application has the same error as seen through workflow status monitor when I click on the notification:

  oracle.apps.fnd.framework.OAException: java.sql.SQLException: ORA-20001:

  ORA-06512: at "APPS.HR_NEW_USER_REG_SS", line 162

  ORA-06512: at line 1

  There is a Bug on the site of oracle, who suggested adding a patch that would bring versions of the package at a certain level.  We are already beyond this level of version.

  Someone had problems with this or know what it is, we can try to work around it and get details of FYI to appear in the notification.

  Thank you.

  This problem has been fixed by the support of Oracle providing a patch.

• Error when creating a new DAC connection using the MSSQL connection type

  Hello
  
  I am trying to create a connection DAC, i.e. a new repository DAC in the SQL Server 2008 database.
  Version of the DAC: 10.1.3.4.1
  Database: SQL Server 2008
  
  
  I downloaded from the link below sqljdbc4.jar file and placed it in the D:\orahome\10gR3_1\bifoundation\dac\lib folder.
  [http://www.microsoft.com/en-us/download/details.aspx?displaylang=en & id = 11774]
  
  I entered all the details correctly to the name of the database, the database host, port of the database. I created a new file for authentication.
  
  I get error when I try to test the connection below.
  
  Driver MESSAGE: MSSQL not available!
  CLASS EXCEPTION: java.lang.IllegalArgumentException
  
  com.siebel.etl.gui.login.LoginDataHandler$ LoginStructure.testConnection (LoginDataHandler.java:512)
  com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
  com.siebel.etl.gui.login.ConnectionTestDialog$ Executor.run (ConnectionTestDialog.java:290)
  
  : CAUSE:
  MESSAGE: com. Microsoft.SqlServer.JDBC.SQLServerDriver
  EXCEPTION CLASS: java.lang.ClassNotFoundException
  
  java.net.URLClassLoader$ 1.run(URLClassLoader.java:200)
  java.security.AccessController.doPrivileged (Native Method)
  java.net.URLClassLoader.findClass(URLClassLoader.java:188)
  java.lang.ClassLoader.loadClass(ClassLoader.java:306)
  Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:276)
  java.lang.ClassLoader.loadClass(ClassLoader.java:251)
  java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
  java.lang.Class.forName0 (Native Method)
  java.lang.Class.forName(Class.java:169)
  com.siebel.etl.gui.login.LoginDataHandler$ LoginStructure.testConnection (LoginDataHandler.java:510)
  com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
  com.siebel.etl.gui.login.ConnectionTestDialog$ Executor.run (ConnectionTestDialog.java:290)
  
  
  The error seems to be a problem of connectivity to SQL Server. I use the correct jar file?
  
  Please, help me to solve this problem. Appreciate the help given on this forum earlier.
  
  Thank you

  Add
  .\lib\sqljdbc4.jar
  at the end of the line beginning with SQLSERVERLIB in the file config.bat

  Pls correct brand

• Error when opening a new project

  Hello

  Our team has worked on RoboHelp 7 for awhile now. I recently joined the team and they asked me to work on RoboHelp 8 and give them a presentation on the same. I downloaded a version of RoboHelp 8 and installed track.

  Problem:

  
  When I open RoboHelp 8 and select Application Help or an empty project, I start getting errors (I tried all the other options too with no luck).

  Process:

  Open RoboHelp 8

  Select "Request assistance" under "create a new.

  

  By clicking on "Finish".

  The following errors occur

  

  And so on... It continues with a lot of other mistakes.

  Any suggestion on how to open a new project with these errors will be very appreciated.

  Thanks in advance

  Calcasmy.

  You wouldn't necessarily be aware of problems during installation. Have you checked precisely with your IT that they do not store your profile on the network. This bit is important.

  Then try http://www.grainge.org/pages/authoring/installing/installing.htm and see the problem facilities section. A link help with installs that have failed and the other more deeply than the programs own uninstall routine removes facilities. You may need to reinstall for RevoUninstaller work.

  I suggest that you work with HIM using the links.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• Adding a new user with Labwindows/CVI

  Hello

  I really need help I'm strugggling to find a solution.

  I want to add a new user and view the list of users using CVI?

  When adding the user, I would like to add the name and the password as well.

  I don't want to use this TS_EngineDisplayNewUserDialog I want to be done with the user input from all this information that I receive information from Active Directory.

  Is this possible?

  Kind regards

  Shakeel

  HI RaviShrigiri

  Thanks for the reply.

  I found what I needed. http://forums.NI.com/T5/NI-TestStand/can-I-use-Active-Directory-to-validate-users/TD-p/3299366

  I added the creation of a new user and add to a group in the aforementioned project.

  Kind regards

  Shako

• First elements Timecode.cpp - 1014 error when adding media

  Software: First elements 11

  Camera: Sony DCR TRV22E

  OS: Windows 7

  When selecting Add multimedia elements, I get: [..-.. \Src\Timecode.cpp-1014] error several times, when the capture window finally arrives he says that the capture device is currently offline.

  This happens not only when the unit is plugged in and power but also when the camera is not connected.

  I tried different IEEE 1394 drivers available in windows 7 and none of them work.

  Host compatible OHCI 1394 controller

  Controller of compatible host OHCI 1394 (Legacy)

  VIA 1394 compatible OHCI Host Controller

  The connection to the camera via firewire is ok because I can download a video of him using Nero Essentials video, I can't do it through first elements 11.

  Post edited by: foradobeuse Oops, I put the incorrect error code in the title, it should be timecode.cpp - 1014

  I think I solved this problem.

  I have a number of external USB connected, for example, hard drives, webcams, mouse, keyboard etc., devices so I unplugged individual devices until I found that the Error 1014 is more appeared when adding media.  I plugged the other USB devices back in but kept the last disconnected device and can now add media from my miniDV via firewire.

  I don't think we can let off the hook here PE11, since I had no problems with USB so far and each capture freeware program that I tried did not have a video capture problem I had plugged in any USB device.

  Thanks to all who have contributed and I hope this helps other users faced with Error 1014, look at the number of points of view on this discussion after only a few days (~ 300) I don't think I was the only one.

• Is it normal to find errors when running Check Disk manually with Vista?

  For some time my computer would not start without automatically run the disk check. It now starts and works well, but Check Disk find errors every time I have manually run the disk check. Is it normal to find some cluster errors when you run Check Disk? It runs today, he finds and replaced two bad clusters. Two is not much, but I ran as a few days ago. Thanks for any information, that everyone has.

  It would be wise now to test the hard drive. Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it. MS - MVP - Elephant Boy computers - don't panic!

• error when creating a new partition "the operation you selected will convert the selected disk from basic to dynamic disk...". »

  Original title: getting the error while creating a new partition

  here to create a new partition get the error "the operation you selected will convert the disc selected basic to dynamic disk... etc" Please help.

  I would like to join the screenshot of the error, how?

  Hello

  1 have had any changes made on the computer before the show?

  2. how many partitions are there currently on the computer?

  3. how many hard disks on the computer do you use?

  4. when exactly you get the error message?

  I suggest you refer to the article and try to follow the steps and check if you are able to create a partition:

  Create a new Partition on a hard disk in Windows 7

  http://TechNet.Microsoft.com/en-us/magazine/gg309170.aspx

  I also suggest you the link and attach a screenshot of the screen.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

• OE_ORDER_PUB. Process_Order errors when adding a detail if one of the existing detail rows row is updated

  Hello!

  Whenever a sales order line is updated but not yet recorded in the order form, oe_order_pub. Process_Order errors when you try to add on the same command line. It gives the error "line locked out at the treatment of" the first time you run the api then it gives the error "Record is currently underway on by another user, please try to update later" on successful runs.

  When I tried to simulate the same using two forms of sale, an update of one of the lines and do not save more while the other added a line in the same order sale then save, he managed to save the line.

  What I don't understand the API's for it's to stop me if I just add a line, and it has nothing to do if an other lines are updated by another user (and this is only possible on the order form)?

  Is there anyone who has encountered the same? This is the normal behavior of the api or I missed something? No work around?

  Thank you.

  This problem is solved.

  The solution to the problem is that the value to calculate price flag must be set to 'Freeze the price' If you do not want Process_Order to update the price of unit sales of existing lines SB. Based on my observation and technically speaking, Process_Order updates price of all the existing lines of unit sales (and probably other columns) linked to the price based on the price of the object's current price list if the indicator price calculated is 'Calculate price' (I have not tried but in "Partial award"). If other users happen to edit one of these lines of l.o. and has not saved, the update fails and this is the reason for my problem.

  Thank you.

• Error in adding the new VM disk

  Hello

  I get this error when you try to add a new disk in vCenter. This error occurs when I choose any store data in the cluster. See the picture for the screenshot. How can I fix this error, steps would be too large. Any help is greatly appreciated.

  

  Thank you

  Jay

  It seems because you have set the affinity to the Drs storage... You can see Cormac blog about this option:

  http://blogs.VMware.com/vSphere/2011/09/storage-DRS-affinity-anti-affinity-rules.html

• Error when adding a partition to a view of materlialized

  Hello
  
  I get this error when you add a partition to a materialized view.
  
  ALTER MATERIALIZED VIEW mvedw statement. ADD PARTITION VALUES LESS THAN ('201304') MAR2013 MV_CLM_CAPITN_F
  *
  ERROR on line 1:
  
  ORA-14074: partition bound must gather greater than that of the last partition
  
  Please notify.
  
  Kind regards
  Narayan

  Well there you go - you already have this partition you want to add
  >
  MVEDW MV_CLM_CAPITN_F MAR2013 ' 201304'
  >
  Then why you try to do this?
  >
  ALTER MATERIALIZED VIEW mvedw statement. ADD PARTITION VALUES LESS THAN ('201304') MAR2013 MV_CLM_CAPITN_F
  >
  It is the SAME name of the partition and the value ('201304') in the list of partitions that you just posted.

  Maybe someone else added the partition when you weren't looking.