Of course do more fit in the display area

Similar Questions

• I'm retouching of images taken on my iPhone 6 more with Photoshop CS6. I'm doing my color correction and add effects and all that. Before you export the image I review and be sure to what I has no more sharpness and the lines are smooth and it looks good

  I'm retouching of images taken on my iPhone 6 more with Photoshop CS6. I'm doing my color correction and add effects and all that. Before you export the image I review and be sure to what I has no more sharpness and the lines are smooth and it looks good overall. I export it to JPEG, max quality with the establishment of reference standards. I then open the image and it seems fine, as it did in photoshop. My problems begin to occur when I try to download on Twitter as my profile picture. I tried downloading from my office directly on the site via google chrome. When I download the image then begins to have jagged edges and overlooks the tablets. So I thought it was some performance settings, then I tweaked them and restarted a couple of times and still the same result. He would go on my desk but when uploaded to twitter as my profile picture is horrible. So I tried emailing the image of myself and the download through my phone. I opened the image on my iphone and it seemed fine as he did on my desktop but when I downloaded the image it makes then look blurry. I had this problem when downloading photos Twitter via my iphone, so it doesn't surprise me. I have read different forums saying: you must download it from the office, so I thought it would work like this. This could be a problem of twitter than compresses uploaded photos? Other people can do very much the same way, but it does not work for me. Please someone help me before I put my computer in an oven microwave.

  This could be a problem of twitter than compresses uploaded photos?

  Yes. The rest, we can answer. You wrote a lot, but very little discussion. Instead of accurate information you lose yourself in the vague descriptions. Screw color management to the wrong dimensions that trigger resizing server-side it could be any number of things here.

  Mylenium

• The display area moves and focuses on the object when it is selected

  I recently downloaded 6 Captivate and when you edit a slide if I select a subject it focuses on the object and he spends a large part of the blade out of the display area.

  For example, I'm working on a blade with about 10 possible answers multiple choice quiz and as I change these answers he focuses on the first answer while he is sitting on it. For me change the background display options I manually move the slide because I can see them no longer.

  I'm sure that there is a simple answer, but I checked the preferences, opinions, online forums and I can't find anything on this and it's driving me crazy.

  Thank you!

  Hello

  You can also view > view and then zoom back, to decrease the size of the slide in the main pane.

  Or

  If there is no unexpected behavior when you use the workspace or by using features, you can reset the preferences:

  Here is the procedure:

  Captivate's preferences folder location is:

  [Windows 7: C:\Users\[user name] folder of Captivate 6 \Local\Adobe\Adobe \AppData (hidden folder)

  Windows XP: Settings\Application Data\Adobe\Adobe Captivate 6 record - [user name] C:\Documents and Settings\

  Mac: /Users/ [user name] / Library/Preferences/Adobe Captivate 6 folder

  You will first need to close Captivate 6 and then rename the folder 6 Captivate 6_OLD Captivate.

  Then restart the captivate and check if this solves this problem.

  Re-create the preferences resets all settings and customization of Captivate, but won't have any changes to your project.

  Thank you.

• Video do more fit in the preview window

  Hello

  I've been running into a problem that I didn't until I restored my computer a few months back. For starters, I know my video files are in 720 p and I have the sequence at stake as a result. When I place the video files in the 'Source' from the full video is shown. However, once the video is brought on the timeline the preview window shows much more expanded to the point where only the middle of the video can be seen. I got around this in the past by dragging the corner copying the scale for each individual item, but it became monotonous extreemly.

  Any help would be appreciated,

  Thank you

  the atttached screenshot shows the problem

  For starters, I know my video files are in 720 p and I have the sequence at stake as a result.

  No, they aren't. They are 1440 x 1080; You can see that in the project Panel. From a functional point of view, they are 1920 x 1080, because they are HDV. Therefore, you should use a sequence of 1080i/p preset... or you can use a preset of 720 p, but you will need to reduce the image to fit.

  A quick way to create a sequence that matches your footage is drag an element to the button new item at the bottom of the Panel project; It looks like the chipped sheet.

  If you want to use a sequence of 720 p, select all the clips and use the right-click > scale image size option. Optionally, manually clip, scale and then copy and paste the path for all the other clips effect.

• Extend the Windows desktop in the DISPLAY AREA?

  Cannot find or do not? Why? try using a different monitor and can not find how to switch the default monitor to a secondary monitor! Help!

  Hello

  You need to configure Windows display adapter to extend your desktop:

  Right click on the desktop and then click Properties.
  In the DisplayProperties dialog box, click the settings tab.
  Click the display list and select your external monitor. If you don't see more monitors listed, your hardware may not support Dualview. You can still use MaxiVista to set up a second computer as an additional screen, however.
  Select the extend my Windows desktop on this monitor option. Click on apply or OK.

  You can also make reference to: http://www.microsoft.com/windowsxp/using/setup/learnmore/northrup_multimon.mspx for more information.

• mounting Panel - how to extend the display area

  Can someone explain how we are able to see the timeline more please.

  Mymax window size I see 0 - 51 seconds and I really want to "scroll" display area to see the past 51 seconds but I can't work out how to do it.

  I did read the help guide but found nothing.

  I use Version CS5 not 5.5

  The timeline has a maximum of 55 seconds viewing area, but you can manually enter your own parameters in the properties area. For example, you can start a transition to 65 seconds and he ended up in 100 seconds with 65 in 'delay' and 100 in the 'duration '.

• The display area jumps away from the objects that I select

  Hello

  I work in Adobe Captivate 9 and when I Zoom in and click on an object of display area immediately jumps away from the subject.

  For example, if I click on an image in the corner bottom right display area jumps away from this subject and instead shows me the upper left corner of the slide

  I'm doing something wrong?

  Thank you

  SoC

  Loss of concentration and very annoying. Was not the case in CP7. You can also connect a

  bug report, please?

• I have a dual monitor in the display with a different total 3 registered. How can I get rid of one of the duplicates.

  I accidentally added the same monitor in the display area where you can change the appearance.  I think this causes a problem when I click for a drop-down list, as the drop-down list will be grayed out until I put the mouse pointer in the drop-down list box list, so I'm able to use the right items listed lower down.  However, after I have click on the option I want to use, copy, paste, cut, etc, that particular item will remain on the screen until I have change the resolution and then go back to the original resolution.  I'm afraid to remove the monitor that I would delete that I'm not with my main monitor.

  Thank you for your time,
  Frank

  Hi Frank,.

  I suggest you to change the main view and check if that does the trick. To do this, follow these steps:

  a. click Start and select Control Panel.

  b. click view , and then select change display settings

  c. click the type of view you want as primary (or display 1) and select the option 'Allow this my main screen'

  You can also see the following articles for more information:

  Move windows between multiple monitors

  http://Windows.Microsoft.com/is-is/Windows7/move-Windows-between-multiple-monitors

   

  Work and play better with multiple monitors

  http://Windows.Microsoft.com/is-is/Windows7/work-and-play-better-with-multiple-monitors

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Document windows does not use all the available on new monitor display area

  Hello

  I have a new monitor - a Benq BL2711.

  I have set up as my secondary monitor on display in Windows 8.

  I can put Photoshop (CS6) on this screen and maximize the it, but there is a vast space not used in the document window, which is not used. I want to show a lot more of my images that I can currently, but the document window will not only fill all that screen real estate. A large part of it is lost.

  The panels occupy the right space to the bottom of the screen, but the window of the document (or the display area?) uses only 60% of the height of the screen.

  What is a limitation or do I have to configure something? (I have reset the workspace of photography).

  Thanks for any help

  Nick

  It is really a shot in the water, but it's the space used by the "timeline" Panel when it is open. Try to check in the menu window and close the bottle.

  Other that that, there are always some good old Reset preferences. Make sure you save the custom actions/brushes/presets and so forth first!

  

• Accounting entity not reflecting is not in the display during the installation of the ERPI

  Hi all
  
  I'm trying to configure ERPi to load Oracle data.
  
  When I initialize the source, I'm getting (the process was submitted to initialize the source system. Process ID: 8 ID excerpt: 89501)
  
  but when I try to configure accounting entities, I am able to select the type of Source system and the source system, I don't get any list of accounting entities in the display area.
  
  Architecture:
  
  I am trying to extract data from Oracle GL(11.2.1 E business suite release 12) to hyperion planning version 11.1.2.1 with ERPI. I use ODI 11.1.1.6.1 and I have applied patch 502 with it.
  
  ODI works very well, I'm able to run and test agents but also able to test the connection with the database
  
  Help, please.

  Properly initialize the source system? You should review the details of the process and ODI operator to see if the script completed successfully.

• How does password manager does not work even if the settings are set correctly?

  I've recently returned to version 3.6.17 4 cause version 4 was unstable. Now that I have the old version (more stable) offer not password manager record passwords more even when the settings are set correctly.
  I notice that I had viruses and rootkits deleted (maybe they did some damage) and I cleaned my system with a registry cleaner (maybe he removed some settings through it) and this has not fixed by a clean install.

  You still see the names and passwords in the Firefox password manager?

  Make sure that you do not run Firefox in private - browsing using Firefox without saving the story mode (permanent).

  • You enter private browsing mode, if you select: Tools > Options > privacy > History: Firefox will be: "don't forget the story ever.
  • To view the history settings and cookies, choose: Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck: [] "Permanent private browsing Mode.

• my iphone 5 c opens more after that I was invited to be updated with itunes. now, the display shows only itunes usb cable and logo. read some tips here, but nothing happened. any help will be much appreciated.

  My iPhone 5 c opens more after that I was invited to be updated with iTunes. now the display shows iTunes logo and the USB cable. I have read and applied some tips here, but nothing happened. Any help will be much appreciated. Thank you.

  https://discussions.Apple.com/message/30014877#30014877http ://

  Read the post from sierrawren . It helped me to fix my phone. Now it works perfectly fine. Hope it can help others too.

• How can I get more of my character to display at the top of the display screen?

  Before you download the latest Firefox, my character at the top of the display showed at least 1/2 on firefox. Now, is that the ears. How can I show more of her? Stupid question, I know, but it's bugging me.

  I think you need to show toolbars as you can so that your character can have more space so it can be displayed more.

  How to show or hide various toolbars?

  • https://support.Mozilla.com/en-us/KB/how-do-i-customize-toolbars#w_how-do-i-show-and-hide-the-different-toolbars

  Check and tell if its working.

• I have a 4th generation iPad and the display is damaged. I bought in the States, but I'm not living there more. I live in the Brazil. What should I do to have difficulty here in the Brazil?

  I have a 4th generation iPad and the display is damaged. I bought in the United States, but I'm not living there more. I live in the Brazil. What should I do to have difficulty here in the Brazil?

  damage to the screen is not covered by the warranty - see if this offer your answer > https://www.apple.com/support/ipad/repair/screen-damage/

• extend the display time in data acquisition for more than 10 sec

  I have create a vi of analog data acquisition. Everything works fine. However, no matter what I increase sampling # and rates; maximum display time is always 10 sec. I need to display the longer period time, but don't know how. Can anyone help?

  Not a good VI.  Where did you go?

  The properties VI/execution has the checkbox next to unchecked the Autmatic error handling.  And you don't have an error on your DAQ assistant indicator, or sons of the error at all.  Fix them, and I bet you will see that you got a timeout error.  Also, the while loop had uncontrolled Autogrow which means Add constants or change the display of the Express VI to disappear outside of the loop rather than more and more to their housing.

  You do not have a timeout constant cable to the DAQ assistant, which means that it will use its default value of 10 seconds.  This will cause a time-out error that you won't see because the VI property is unchecked and you don't have another handling error in its place.