Firmware of the device wireless Broadcom lost in an update of the BIOS

Similar Questions

• LSI Logic SCSI Ultra320 RAID Firmware and the BIOS utility. Cannot make the diskettes.

  I downloaded the pack sp29637 for Firmware LSI Logic Ultra320 SCSI RAID and the BIOS utility to my Workstation xw 8200. I'm doing a disk from the downloaded file. I runs the file, but when it tells me to put a floppy disk in the A: drive and I confirm, the window closes and the diskette is not made. Looks like the copy in the file program is corrupted.
  Does anyone have this already developed package files so I can copy them to a floppy disk?
  The files are supposed to be the following:

  Hi Sasi,

  Yes you are right. Then, I realized that I could open these files using Winzip or Winrar. I thank very you much for responding to my post.

• Try to find the network adapter without WIRELESS Broadcom 2 x 2 for X120e

  Do not understand the difference between the 1 x 1 and 2 x 2 802.11n appellations, I ordered my X120e with the default option of 1 x 1. While the speed is OK when I'm close enough to my wireless router, the beach is not as good. (Not nearly as good as the adapter 802.11 g in my T61).

  Now, I know better, so I'm on a mission to buy the Broadcom adapter. According to the hardware maintenance manual, the FRU # is 60Y3251. If you Google this number, there is only a single sale of the part store: sparepartswarehouse.com. Has anyone ordered Lenovo parts of them before?

  I understand from another thread on this forum that the BIOS has a whitelist of approved mini PCI Express card, otherwise, I had just order one part of Dell which has the same Broadcom chip and less expensive.

  I don't think that the card from Dell or HP works, as far as I can tell lenovo approved cards have a lenovo firmware that detects the BIOS at startup. FYI, 60Y3251 is $53.50 IBMmaintenance.

• HPC8180 printer connects to the wireless network, after upgrade firmware to the router wireless

  My HPC8180 has been wireless since I bought it some time ago.  I recently had to upgrade the firmware on my router wireless of Netcom NB9W and since then my HP will not solve for the wireless network.

  I run the wizzard of wireless network on the printer, select the correct SSID and enter the WEP key according to the instructions.

  It will then not connect.

  Print the summary I have says that it passes all except:

  No filtering = Fail

  Connected = do not run

  Signal strength = very weak (which is strange because it is about 10 feet away from wireless router).

  Other networks detected matching your network name (SSID) = No.

  Summary says:

  Network Name (SSID) altnet (correct)

  Address IP = not applicable

  Configuration source = not applicable

  Communication mode = Infrastructure

  Authentication type = open system

  = 64-bit WEP encryption

  I have NOT activated the mac address filtering

  Any ideas?

  Your router appears to be a DSL modem-router.  Those who can be difficult to connect to.  In addition, WEP can be problematic and is no longer a measure of security.  WEP can be broken in 10 minutes approximately with the freeware on the internet.

  We will do three things:

  1. replace the WPA or WPA2 encryption.  You can make your own password.  Do 13 or more characters, numbers and uppercase and lowercase letters.

  2 reset the default settings on your printer network (configuration > network area).

  3. attach to the router in this way:

  Sometimes the DSL providers have more control over the router like the printer.

  -Unplug the phone line from the router
  -Cut the power to the router, wait 30 seconds, then turn on the power.
  -Go through the normal process of the printer connected to the device (wireless configuration wizard)
  -Now to find the IP address of the printer (it should be on the self-test printout), type it in a browser.
  -On this screen, you will find a tab management network, then on the left wireless, then the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address).
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the white gateway and DNS
  -Finally, connect the telephone line, restart the router and the test.

• 4 usb ports - this device is disabled because the firmware of the device did not give him the necessary resources. (Code 29)

  m facing a problem with hub 4 ports usb of my... When I connect usb hub my with my usb keyboard and mouse, and then the lights of the suite to get devices but they doesnot work... and the error message shows... I checked in Device Manager and I got the message details which are given below.

  Device status:

  This device is disabled because the firmware of the device did not give him the necessary resources. (Code 29)

  driver version:

  6.1.7601.17514

  Please help me... Thank you.

  Hello

  In the Device Manager - right click on the device and Uninstall - when complete reboot.

  Check in the Device Manager to see if the device re-installed. If it isn't action - Scan for
  hardware changes.

  Also check the BIOS - Setup/settings - often F2 for system start - make sure that the USB port
  is activated. Check with Support from the manufacturer of the system/motherboard, their documentation online.
  and ask in their forums.

  How to fix error Code 29
  http://pcsupport.about.com/od/errorc/a/code-29-error.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• C - Series codecs update the firmware of the device PHD 720 p

  Hey there everyone,

  A question that I think I know the answer to, but it would be good to get confirmation.  As we know, if a doctorate 1080 p camera is connected to a codec of the C series, when a software update is applied on the codec that includes an update of the firmware of the camera, the camera is upgraded once the update to the codec is completed.

  The same will happen if a doctorate 720 p camera is attached to the C Series codec instead?  I do not, but it would be good to get confirmation.  First tests showed that it will not.

  Thank you!

  Hi Bob,

  You're right, it will not.  Series package C does not contain the software of the camera for the 720 p camera, and no improvement will happen.

  For 720 p and 1080 p camera camera firmware are different.

  Teck Chye

• Broadcom Wireless stopped working after Windows updates

  Hello, everyone!

  I have a Pavilion dv6000 with wireless network. Everything was OK, but last Monday the blue wireless light was suddenly always amber and me did not have wireless access. These are the facts about my problem:

  * I reset my laptop to factory - wireless configuration works very well

  * Windows Update all installed, but one, updates - wireless works fine

  * I installed the new Windows Live Messenger - WIRELESS STOPED working

  * I uninstalled Windows Live Messenger - wireless works fine

  * Windows Update installed .NET Framework 3.5 (it was the update of Windows I jumped at step 2)-without WIRE EFFONDRES WORKING

  And now, my problem is that even if I try to "roll back" to a "restore point" before installing .NET, I get an error and I don't seem to be able to "Uninstall".NET 3.5. On the other hand, the pilot "Broadcom Wireless 802.11 g" has disappeared from the Device Manager and I don't seem to be able to reinstall it, or not reinstalling patches 'HP Wireless Manager' the problem.

  Can you help me, please?

  Thanks in advance,

  Nuno

  Work on laptop of my boss's son is having the same issue... I got to work by going into safe mode device manager and delete all references to pci bridge and restart... xp detects the wireless card as well as all pci bridge components and everything is golden... update XP sp3 now and go see if only the pipes still wireless card... will put in day this post when finished... im on xp, but I'm sure it would work for vista too many... questions you can email [email protected]

  * Update *.

  Installation of XP Service Pack 3 has made clear the wireless card again... is returned in Manager mode and the security apparatus and remove all references to the PCI subsystem devices except Bus PCI and ISA standard PCI bridge and rebooted and bam wireless card is back... it is quite boring... my recommendation would be to turn the builtin wireless power off and go buy a wireless usb card and do with it...

  Message edited by Akrifay on 02/20/2009 14:16

• How can I turn off wireless and bluetooth via the bios?

  "How to turn off the Wi - Fi in bios maps?

             

  I have a laptop Toshiba and Windows 7.

  Some specifications are necessary for me to work on a remote network. Bluetooth and Belarc test still does not work and I get the message"wireless cards must be disabled in the bios. »

  Without thread is DISABLED in the BIOS, also, I went to the network and the Internet and chose WIRELESS DISABLED ON HARD WIRED CONNECT and network cards, I DISABLED it. Also, I went to the network and sharing Center and changed the settings of the adapter to DISABLE.

  Wireless Configuration Utility > Broadcom Wireless Utility > "No currently no wireless available and active devices."

  Bluetooth is UNINSTALLED

  What else can I possibly? I would appreciate a solution.

  Thank you

  GVautour

  Hello

  Thanks for posting your query in Microsoft Community.

  You want to turn off wireless and Bluetooth via the BIOS, I suggest you ask to contact the manufacturer of the computer for that.

  Please do not hesitate to post, if you face problems with Windows in the future, we will be happy to help you.

• Gigashot K40HE - update the firmware on the SD card does not work

  Hello

  IBought a Gigashot K40HE 2 years and everything was good until he stopped keep the date in mind.

  I had the assistance of Toshiba phone told me to update the firmware with the following procedure:
  1. prepare a formatted, empty SD card.
  2. Insert an SD card to the card reader. Copy the firmware file
  (file name must be "psd.bin") in the SD card. Make sure that the new firmware file is copied to the SD card.
  3. Insert the SD card into the DV.
  4. Insert the battery in the DV.
  5. Insert the adapter in the DV. (dual power supply)
  {color: #ff0000} 6. press on "Power button" to power. Then the LCD displays 'FWUPDATE YES OR NO'. Select "YES".
  and press 'OK '. The DV will update automatically the FW. {color}
  7. after that the FW update completed. LCD display will show "OK". And then, will auto power off.

  Everything was good until 6... The DV starts as shown. It justs starts normally, asking me to set the date as every time I turn on my DV.

  I tested with a SD card that usually work on other devices, so I guess that the card is not defective. It's a card SD transcend 1 GB 45 x. And I know that the card is seen by the DV, because it creates folders on it for recording photo or video.

  Has anyone an idea to help me sort this out?

  Best regards
  Ozhades

  Hello ozhades,

  before you start an update of the firmware, it is very important the battery completely full.

  After the battery is fully charged please do the fw update again.

  Best regards

• Satellite C850 - no wireless after the BIOS update

  I have a model C850-PSKCCA-04G00M

  I just did the update of the BIOS. On the conclusion, no wireless connection.

  In the Realtek TRL8723AE Wireless LAN 802 Device Manager. 1 PCI-E Nic does not work correctly.
  In properties, I see this error message:

  "This device cannot find enough resources that it can use. Code 12
  If you want to use this device, you will need to disable one of the devices on this system"

  Restoration of the system that would result in the update of the BIOS?

  Grateful for your help

  Thank you
  Adbears

  I ve never herd on this issue.
  Have you tried to reinstall WLAN driver and check if you can toggle the map using the FN keys?

• Name of the product lost in the BIOS?

  I have a script to look at laptop computer product names, but some have lost their names. Called "Tecra M2" for example, they are now "Portable computer". I tried to restore the factory settings on the BIOS, but it's always the same. I suspect it's to do with the help of the Prodcut recovery CD but I am not some exercise.
  Does anyone know why this happened and how can I solve this problem? I can provide more information if necessary.

  Jeremy.

  Hi Jeremy

  AFAIK when the unit is a new it is the name of the actual product but it is possible that your device has a new motherboard and having traded, there is no entry of old. The restore CD just install OS but it has no effect on the BIOS settings or other entries.

  Can you please tell me why it is so important to you? I'm not sure but I think that this just certified partner can change that.

• Satellite L350-14 F wireless networkconnection lost less than an hour

  Hello

  A view days ago I bought a L350-14F and make a wireless connection to my network.
  During the windowsupdate wireless get lost and by searching for available networks, no wireless networks detected.
  After that the laptop reset am connected to my network but has lost connection in half an hour.
  Change to channel does not work. I don't think that the problem lies in the router our other wireless PC that work well.

  Can someone help me?

  Kind regards

  Henny

  Hello

  Have you tried to update the driver Wlan?
  If this is not the case, check if an update will improve the WLan functionality.

  In addition, check to see if a BIOS is up to date.
  I noticed that Toshiba release BIOS updates that could address questions of WLan.

  Find out!

• How do I turn on wireless turn off in the BIOS?

  Hello.

  I'm totally new to more technical side of computers so please excuse me if I do not have much sense.

  I just bought the Satellite P200 especially for an occasion of home business and there are several requirements that I am trying
  to answer, but seem to be failing.
  I presented a report of the laptop Belarc to society and they advised that in order to use this laptop that I
  have my wireless turned off in my BIOS.

  I have not the slightest idea what it means and what I have to do? I've read a few other subjects online which have lost some of
  light, but I still do not know how to do and, if it is disabled does that mean I can use is any more?

  Basically, I work online in my current line of work and use my laptop (with WiFi) for this but this other thing that I'm trying
  getting in requires a disabled wireless network but I still want to use the wireless in my own time, is - it possible?

  Thanks in advance for any help, that all the world can offer,

  Natalie.

  I don't know if this feature can be disabled in the BIOS, in regards to my machine, you can't do that.

  OK, understand your problem, or better, your company's security restrictions.
  You can check if you can disable this feature by pressing F2 at startup to the top of your laptop. He enters the BIOS. There simply navigate a bit, if you can find something with disabling wlan.

  But you could ask them if it would be ok. When you just turn off wlan using the hardware switch in the front of your machine.

  To use wlan for private, you must activate it back, of course.

• HP Photosmart 7525: How to check the version of the firmware of the HP PhotoSmart 7525 is up-to-date?

  How to check the version of the firmware of the HP Photosmart 7525 is up-to-date? And where can I go to download the latest firmware?

  Hello

  Follow these steps to check the update of firmware for your printer:

  http://support.HP.com/us-en/product/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5286642/document/c03312867/

  Note: the printer must be connected to your network to check the updates, if it is connected with a USB key follow the steps in the tehse to connect the * beep * to your wireless network:

  1. In the wireless menu, tap Settings.

• USB-TC01 gives error-201165 "firmware for this device is too recent.

  Not sure where else to this post, but the USB-TC01 DAQmx uses, so maybe someone recognizes this.

  I plug it to the USB port and it lists very well.  It runs the application very well canned.

  But when I try to take data under DAQmx 9.1.5 I get this curious message, as well as boards "Downgrade of firmware for this device" I don't want to do that.

  EDIT: I see that the firmware of the device is 1.1.0f 1

  The specifications of the USB-TC01 don't say what version of DAQmx is necessary, although 9.1.1 supports the device.

  I tried on XP and Win7 with the same result.

  TIA

  Ed K

  I guess that "ancient" is relative.  Budget and LV9 story of me and I have to stay on the DAQmx version.  But NEITHER finally took me in his Web and it's time for an upgrade.  A trial version of new LV and 9.9 DAQmx solved, of course.  I just wish that error message had been less weird.  At least, it is here for someone else could find an answer, no matter how obvious.