Of the alternatives to the Simulator: test applications on the phone

Similar Questions

• How do you remove Simulator Test applications?

  I use the BB plugin for Eclipse and have created a few test applications. My 'Office' Simulator now has icons for them and I would like to delete all but one or two. How do I do that? Whenever I have raise the emulator, they are there.

  Thank you.

  Go to the folder of Simulator and

  Delete all *.dmp file

  Delete all the files (* .cod, * .debug, * .jar, *.cso, *.csl) related to the applications that you want to remove.

• Lack of Options > Advanced Options > Applications entry for the application of Simulator test

  I'm new to BlackBerry dev and I'm still doing my set up and tested development env.

  EPS consists of XP, Eclipse SDK 3.4.1 BlackBerry JDE plugin for Eclipse 1.0.0.67, BlackBerry component Pack 4.3.0.16 version 4.3.0 and the BlackBerry 8120 Simulator.

  I created a test application simple and loaded on the Simulator for testing through the cmd Eclipse Run > run as > Blackberry Simulator.  As expected, the application icon was displayed on the screen of the Applications (in the Simulator), and, when selected, the application has successfully launched and behaved normally.  So far so good.

  However, when I checked the Options > Advanced Options > Applications on the Simulator, I found that my request was not among others installed apps.  (I tried on two other simulators with the same results.)  I thought about reading the other posts on this forum that I would wait to see this information.   When I install on a simulator I would indeed expect display name information and the app version contained in Options > Advanced Options > Applications list?  If Yes, what should I do to make the information appear?

  Thank you.

  If you install your app in the Simulator simply by copying the COD file in directory of the Simulator (what is JDE when you run Debug), then you should not wait for the application to create. The modules in the files of the cod will be stil it well and that's all that generally the County. You can see the list of modules under Options-> Advanced Options-> Applications-> (Menu)-> Modules. Applications that are included in the Options-> advanced-> Applications are just constructions of metadata on top of modules to simplify various tasks, like setting permissions, adding and removing applications rather than tracking dependencies and individual modules.

  PS, You can programmatically create the entries in the application using the CodeModuleGroupManager and CodeModuleGroup if you really must have your request under Applications. Do not however forget that classic pose methods (Desktop Manager, Web OTA Download, BES OTA Push) all create them the entries in the appropriate application. So, you don't usually have to worry about this problem in the production environment.

• Java Code signing keys for the test application

  Hello, I develop an application for blackberry, and he needs key API JDE to test in the cell.

  If I download key for the application and it does not work on the phone, can I use the same key for being of other tests and other applications? In case not, how can I get a key to test my application?

  Sorry for my English
  Thank you

  @ marean

  If your problem has been resolved, then mark this issue as resolved

• Hello. Recently, I buy the suite adobe for students. I also paid for two months. But in my profile it says I have a free plan for testing applications. And I can't get the entire application. How can I solve this?

  Hello. Recently, I buy the suite adobe for students. I also paid for two months. But in my profile it says I have a free plan for testing applications. And I can't get the entire application. How can I solve this?

  Your subscription to cloud shows correctly on your account page?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If you have more than one email, you will be sure that you use the right Adobe ID?

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• No connection option of right for the Windows test application

  I built a test application for Windows 8.1 and everything works but there is no option for connection within the app to qualify.  I activated the rights in the application builder, he has made to my server to existing law, but I can't find the connection option in the application itself.  Free folios are appearing, but no paid folios aren't.

  Can someone point me to what obvious step I have to Miss?

  Drag on the location of the application and tap on what seems to be the Sign In System. It's actually the Sign In option for the application. Let us know if it does not work.

• Test the App Dev does not install o Ipad (test application)

  Hi there kdshjfk,

  It's easier to get a baby... (I know it)

  I had up to now configure all and as a next step, I wanted to test the application on the ipad.

  the .ipa file has more to download, I move and drped in the lib of Itunes, and for a moment I coult see Installing application on the ipad. But then he collapsed and said: impossible to install... wht could be the reasong, and should I do?

  Found this to be a problem with the UDID, Andrea spoke on the phone, all together

• An application using the Desktop Manager Update resets the phone

  I develop for a Blackberry Storm using the plugin Eclipse JDE 4.7. I have change the version number on my application and reconstruction & regenerate ALX. I go to BlackBerry Desktop Manager to upgrade the application, and the phone has to reset. It's very frustrating because it takes almost a minute for it to end.

  The application is a CLDC application, not a module of the system, and does not auto-run at startup, why my device needs to reset?

  It frustrates me to no end, because whenever I make a change to the app and I want to test on the device again, it takes too much time.

  I also noticed that this reset is not always necessary, sometimes just upgraded... but I did not understand why.

  Here are a few useful links I hope re this situation:

  -The reason for which reset is required when you upgrade an application
  Article number: DB-00602
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800620/What_Is...

  How to avoid restarting the Simulator to reload an application
  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=24888

  How to evade taxes of restart of the BlackBerry?
  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=6808

  As well as the suggestion of RexDoug on termination of your application (which is very good advice), you also think that if you do not change the signature of all the persistent classes, the application will upgrade easier.

• Error, call after the application of the phone through my application device

  Hi all

  1. work on the version of BB storm (9500/9530 Simulator) is v4.7.0.75

  2 opportunity BB JDE 4.7

  3 problems is the following:

  I am trying to invoke application of the phone device/Simulator for my application. I am able to launch and to appeal, but once I have cut off communication, the Dialer screen is coming, how can I avoid this Popup Dialer?

  My requirement is - I need to run the app phone, press the button and when we hang up the application phone

  should approach and return to my application where I put out the call.

  Here's the code I used:

  PhoneArguments phoneArguments = new PhoneArguments)
  PhoneArguments.ARG_CALL, strPhoneNumber);
  Invoke.invokeApplication (Invoke.APP_TYPE_PHONE, phoneArguments);

  Thanks in advance

  Ratna

  Hi all

  Above code snippets works very well. in my camera.

• I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios?

  I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios? Cause don't want to reset my phone.

  You have tried: If you can not connect to the iTunes Store - Apple Support ?

  And I tried to do a soft-reset/reboot the phone?

• Old ID is constantly on the phone and I can't change it: try to upgrade of storage, but the old ID happens and I can't change it.  In settings/applications

  Old ID is constantly on the phone and I can't change it: try to upgrade of storage, but the old ID happens and I can't change it.  In settings/applications & iTunes the correct ID is set but not in the settings/iCloud

  Is this a separate id, or you have successfully updated the primary e-mail address on the account? You can disconnect an account iCloud through settings > iCloud > Sign Out, and then log back from the other/updated id to update

  If you have updated the main email address: what to do when you have changed your Apple ID email address or password - Apple support

• Applications removed always playing on the phone

  I have an iPhone 6, and I back up my windows PC. I decided to remove a few apps that I no longer use. Then, I hit remove on each of them, synchronize my phone, and when it's done, they are not removed within iTunes, but are still on my phone! What gives?

  Try to delete directly from the phone, not through iTunes. Press and hold an icon until all the icons begin to shake. Press the X in the upper left corner of the application you want to remove. Press the button Delete. After that you can save your iPhone to iTunes again if you wish.

• Why is that every time I open an application that my phone disconnects from the wifi

  Everytime I open an application that my phone disconnects from the wifi.

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• I just bought an Iphone 6s and not yet am possession of en from the Sim Card. Ook, do you know if I can use the phone including applications via Wifi and put the chip later? Thank you. Renault JL

  I just bought an Iphone 6s and not yet am possession of en from the Sim Card. Ook, do you know if I can use the phone including applications via Wifi and put the chip later? Thank you. Renault JL

  No, because if you bought a new iPhone, then you need a SIM card to activate it before you can use the wifi applications.

  This is a phone after all, you don't need a sim card any to be able to activate it.

• You close the phone to use a golf application?

  You have to have your phone close to you when you use an application of golf?  If I have to walk down the fairway the phone must be in my Pocket?

  If your watch is in range of Bluetooth of your Iphone it will work. For more information as we what is your iPhone model.