Off battery voltage

Help!

I don't know how I managed to do it, but when I go to change the battery of 10 Volts to 12 Volts I can't do.  The value field is 'X' out and marked restricted.

What have I done?

Hi Don,

I think that you have accidentally enabled the restrictions of the circuit.

This can be disabled by going to Options > Circuit Restrictions and by unchecking the checkbox hide component values.

Kind regards

Jason

Tags: NI Software

Similar Questions

  • What I need to do on this message... The attention! The battery voltage is low

    Whenever I turn on my computer I get this alert system battery voltage is low and I have to press f1 to continue or f2 to enter setup.  In the installer, I don't know what to do?

    Any help will be appreciated.  Thank you

    There is an internal battery that stores the settings of the system when the computer is turned off.  Looks like yours needs to be replaced.  Consult the manual that came with the computer and/or web support site to see if it is something that you can replace or if you need assistance, replace it.  In most computers, it is fairly easy to replace, in the majority of laptops almost impossible.

  • System battery voltage

    My computer is now send a warning message before I connect... WARNING: The system battery voltage is low (press F1 to continue) that is this all? HD will happen never before.

    I believe that some models of monitor CMOS battery which is often a coin (the watch battery) Lithium who keeps the clock when the pc off.

    As stated above... brand and model

  • Satellite A100-495 - Win7 show too high battery voltage

    Hello

    I upgraded my laptop old but reliable (A100-495) too Win7 X 64.
    Now, I recognized that Win7 Manager energy shows that 67% remaining at full charged battery...
    I checked with several energy programs - all expect a 15V for battery voltage.
    But the A100 battery only have 10.8V.

    This happens with 3 different batteries.
    Does anyone else have this problem? No idea how to say that the battery has only 10.8V to Win7?
    I tried to reinstall the drivers from the battery and ACPI - but it did not help.
    Multiple load / uncharging also showed no change.
    The best battery last for about 90 minutes, not too bad but battery starts already after 30 minutes...
    Allows you to change the values of caution - a little - but even after to 0% it works for about 20 minutes...

    Any help appreciated ins

    concerning
    BR,

    > But the A100 battery only have 10.8V.
    Looks like the battery nears the end
    How old is the battery?
    Each battery would start to lose own performance after about 500 charge cycles.
    This should be considered.

  • The battery voltage is low.

    Original title: SYSTEN BATTERY VOLTAGE IS LOW

    When I turn on my computer I got this message, the battery voltage is low makes it means

    Veritas gave you some resources to watch.

    This means that your battery is dying and you need to replace.
    Open your PC and search for a battery silver around the size of a quarter.
    Replace with the same type.
    If it's a laptop, see the documentation that accompanies it.

  • On startup, I get a message "Alert." "The battery voltage is low," what battery? How do ifix it?

    On startup, I get a message "Alert." "The battery voltage is low," what battery?  How can I fix it?

    Try changing the battery CMOS CR2032 (battery on motherboard).

  • XPS 420 system battery voltage is low

    When restarting my computer Dell XPS 420, I get the error "system battery voltage is low.  I have 3 options: F1 to continue, F2 to setup utility and F5 for on-Board Diagnostics.

    I did all 3, but the error never goes away.

    What should I do?

    Looks like the battery on the motherboard is out. You must open the computer, remove the battery and replace it.  According to me, that they are of types CR 2023 you can find at Wal-Mart, Target, anywhere else.

  • iPod Touch 5th generation will 20% < 10-minute auto-off battery

    When my iPod Touch 5th generation gives me a 20% battery warning, it is not same exact distance - the thing turns off within 10 minutes of use. 100% to 20% takes days and days, but the latter so-called 20% is wildly inaccurate.

    I tried to let him stay off for 10 to 12 hours before recharging, hoping that it would be to calibrate the battery, but no luck.

    Someone at - it suggestions?

    % battery is not accurate on an iPod. If there are sufficient autonomy I would do anything.

    You can try:

    -Reset the device iOS. Nothing will be lost

    Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

    ten seconds, until the Apple logo appears.

    -Fee for at least 8 hours

    -Reset all settings

    Go to settings > general > Reset and tap reset all settings.

    All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

    -Restore from backup. See:

    Restore your device from an iCloud or iTunes backup - Apple Support

    -Restore factory settings/new iOS device.

  • Video of the MacBook Air to accuse by unplugged (current running off battery)

    Hello. I have a Macbook Air from 2012. The Macbook works perfectly fine when it is plugged, but the minute I unplug the unit, some video that I might be streaming suddenly freezes, even if sometimes the audio is not yet. Weird. The battery works, even if it runs in less than an hour. It has a cycle of 657 counter. The battery health is diagnosed as being 'good '. Anyone know why this is happening and what I can do about it?

    Thank you.

    Apparently, the MacBook Air is electric rationing of the battery through the

    all of the GPU, CPU, free wireless internet, open, applications and requirements

    Mac OS x itself; so many invisible things are underway in the background.

    Have you looked into the specifications of profile of electrical system and battery

    where the status of the battery is spelled in milli-ampere-hour charge remaining

    and expected full load capacity?

    I imagine that the battery can be replaced; also if SSD drive

    is full of stored content, the effort it takes the system to find the space

    for swap files and read/write then in the storage disk, is your MB/Air tax.

    Maybe an upgrade of the hard drive (SSD) ability is something to check

    in (if it is possible to upgrade) or just be sure to not have much stored on board.

    A replacement may be obtained from the macsales, OWC, among others.

    Also make sure that the MagSafe connectors are clean and free of debris on both sides

    the AC adapter and the DC-in Board (on the computer).

    For more information on batteries for portable laptops, & magsafe Chargers:

    • About batteries for laptops Mac - Apple Support

    • Laptops Apple: Troubleshooting MagSafe adapters - Apple Support

    If yours is a model 11 inches, total expected her battery life cycles are less

    as the largest 13-inch model (with the largest capacity of the battery + request) if the

    County of 657 (of max. 1 000) can be decreased if the computer has never been

    Let it run until the battery is dead. ~ Or if the storage environmental conditions or

    use, have marginalized the ability of the computer to function in the plug.

    • Reset the management system (SCM) controller on your Mac - Apple Support

    • How to reset the NVRAM on your Mac - Apple Support

    The SMC reset (and sometimes reset NVRAM) can help with the battery power

    management in general; but the battery may be suspect. The battery charge

    includes everything in the MacBook Air; brightness, audio volume, so the screen

    the use of Wi - Fi, other applications that run in the background; also the antivirus or other

    analysis software running needlessly in the background, using cycles CPU. The

    battery may be getting a workout. More so, if you run games or any other active content.

    You could look at the activity monitor to check the different points under your control

    who may be using resources; all this that consume energy are suspect. Some of them are

    more in your control than others. the system manages several outside of your access.

    An Etrecheck report generated when the unit is running under the battery and another

    When operating on current alternative, can be useful. If nothing else, to see what is

    installed in the computer and its running configuration specifications. The load can tell a story.

    http://etrecheck.com/#about

    There is also perhaps adware or other software that affect the performance of the Mac;

    This may include antivirus, and if cleaning applications have been executed, they can damage the OS X.

    A free to use app, formerly known as "adware medic" now malwarebytes, can help:

    •Malwarebytes | Malwarebytes Anti-Malware for Mac

    https://www.Malwarebytes.com/antimalware/Mac/

    Malwarebytes Anti-Malware (was AdwareMedic) return of experience helps you get your Mac.

    Hard to say exactly what is happening. -If it were mine, I would look in different details.

  • How can I turn off battery saving mode? If that's what it is...

    The other day, my computer laptop has become a kind of battery saving mode after I restarted, where I couldn't customize my background and toolbar, and my internet passwords and things disappeared. I can't fix it, and my computer is plugged... It has a taskbar of bright blue and I can't boot up normally with my saved settings. Thank you.

    Hello

    1. What is the brand and model of the laptop?

    2. where have you changed the settings from?

    Method 1: Run the troubleshooter

    See the following site:

    http://windows.microsoft.com/en-IN/windows7/Open-the-Power-troubleshooter.

    Method 2: Restore the default settings in power options

    (a) click Start, Control Panel, system, and security and then Power Options

    (b) according to the plan that you want to change, click on change plan settings

    (c) select restore default settings for this plan.

    I also suggest you please contact the manufacturer of the laptop computer for more help on the issue.

  • Smartphones blackBerry push email/off switching voltage

    I just got an 8120 pearl with orange

    Don't have the bolt e-mail push on (too tight to pay£ 7.50) but managed to associate my e-mail address of the phone.

    Also, I connected the phone to my home WiFi.

    I wanted to get my e-mails via wi - fi, so if I work without my cell phone I can find a wi - fi hotspot and get all the urgent emails.

    I thought I passed I was getting all my emails home

    However on a drive to the House, Lancashire, Birmingham I picked up about 10 emails so that I receive them probably not through the wi - fi connection.

    My concern is to get about 20 spam e-mails a day about viagra that I don't want to pay a lot of money getting these annoying messages it seems.

    Can I turn off the ease to push and turn to if I need

    Brixton Atkinson-banner

    you are rite, this will do

  • AT300 - battery / load the related question

    Hi all

    May I ask your help with a battery / load the related question

    I used my AT300 a few weeks back and I forgot to turn if off battery voltage flat then, so the next day, plugged the charger, but the loading icon does not appear on the screen.

    Sort left connected to work, but after 8 hours always toll-free, I'll start when plugged into the charger but dies as soon as it s disconnected.

    I thought that I may have killed the battery I found some people saying that if they are allowed to carry out completely so that they will not return to the top.

    So has his hand on another battery but same thing, the guy then a charged battery for me and I got him and started toward the top of a stack, but there is a red exclamation mark on the battery icon and the unit will still not take a charge

    If I plug the charger in the icon changes to show that there main power, if I look at the setting and go to the battery it says 0% unknown battery

    So I am at a loss and hope that some of you may have encountered this and have an idea how to solve this problem

    Thank you very much

    Hmm kinda sounds like some hardware issue about...
    To be honest, this is the first time that someone has reported these problems here in the forum.

    But have you ever tried to reset the default Tablet?
    Press and hold the power button / stop and the volume up button.
    Now the recovery menu appears providing different option. One of the option should allow you to reset the tablet.
    To navigate between options, use the volume up/down button.

    I hope that affecting the default tablet would help you to fix it otherwise, it seems to be hardware related issue.

  • Windows 8: BSoD random-ing

    No idea why, my cell phone 6 months old was blue screen-ing on a random basis.

    System Specs:

    Manufacturer: ASUS
    Model: K55A-HI5014L
    Processor: Intel iCore i5 - 3210M @ 2.50 GHz
    Graphics card: Intel HD 4000 (on-board) graphics card
    RAM: 8 GB 4 GB enhanced
    OS: Windows 8

    RAM chips both (two 4 GB sticks) have been tested on an identical system. Same manufacturer/model/specs. No problems in the same terms. This has happened in the past before adding the second stick of 4 GB, both of which were exchanged for other sticks, tested, replaced the two primary sticks and continued on.

    All the drivers are up to date according to the manufacturer.
    Intel HD Graphics 4000 (64 MB by default) has been updated with generic drivers of Intel.com.
    ^ Has been increased from 64 MB of RAM of 512 MB dedicated with the BIOS in stock

    BIOS is updated according to the manufacturer.

    Laptop is at the top of a computer laptop cooling pad - connected via external power supply - on a constant basis. Once where that is not the key is when I'm away from my office, at a friend's House, or travel.

    Devices in use is a Logitech wireless mouse (mini-dongle is not removed unless they be stored in the bag, in which is stored inside the mouse's), Samsung Galaxy S II SGH-T989 and OEM micro USB cable and wired controller Microsoft Xbox 360 brand. Headphones I use fed current by a free USB port on laptop and has 3.5 mm headphone/mic separate jacks. Tested with USB power and external spare slot. No difference when BSoD that happens.

    CPU fan only turns on and begins to "work hard" by playing the games graphics-large. Web browsing, chat on Skype, watch videos (Youtube/Twitch.tv/whatever), the cool rest - same system using do not block cooling - for an extended period of time (5 hours on and off battery voltage)

    Power management is set to Power4Gear High Performance while it is plugged into an external source and energy savings of P4G while on battery.

    Not really sure what more to say, my laptop suddenly BSOD on not the case. He had moments when I watch videos youtube or casual browsing for hours with Firefox and all of a sudden - BSoD. Several other times I was in the middle of a game (Dead Space 3, Prototype 2, Team Fortress 2, to name a select few) and a Skype call with a friend when all of a sudden - Yes.
    ↑ Firefox is up to date, and to my knowledge - Flash is also updated. I don't use Internet Explorer, and Chrome.

    Temperature wise the bottom of the computer is frozen with the cooling pad and the CPU fan is not in overload.

    I even leave my computer in the middle of the night to update Windows as needed with the periodic BSoD - just came out of no where. (Wake up to the beautiful sound of BRRRRRRRRRRRRRRRRR is not exactly a wake-up call that I want to hear before it restarts at 03:45 in the morning). The spirit - I keep my laptop in the middle of the night - sitting at the top of the computer laptop cooling pad - without worrying in case someone needs to put a hand on me through Skype, I can hear the tone in my sleep.

    Around the 5th of this month (August), I tried to reformat (not with update of Win8) with ASUS recovery partition, but unfortunately the problem persists, as it happened 8 times during the month. I have 8 available minidumps if requested.

    I tried using a copy of Windows 7 Ultimate edition on the same computer through multiple startup in the past and had no problem with BSoD for a full month until I switched to Windows 8.

    To my knowledge, Windows 8 is updated to auto-updates, and most of the optional updates is installed without Bing and Bing Desktop toolbar. Alongside this, Malwarebytes reports nothing wrong to a complete and fast analysis.

    Probably a little too necessary info, but can get the details worked. Got this laptop in February as a laptop replacement for my previous. Works well. Only stickler is Windows 8 blue screening out not the case.

    Not really what else. Would really like to have a response out to reinstall Windows 7, which now seems to be the only other choice.

    Edit:

    I forgot to mention: recent BSOD were SYSTEM_THREAD_EXCEPTION_NOT_HANDLED, as well as one selection of others that I don't remember off the top of my head.

    As well as the recent BSoD I have captured, has been a fairly long list of errors in programs (Bing, weather, Photos, Zune Music/Zune video/Xbox Live games, etc.) - programs I don't USE even - with a Kernel-Power (41) (63).

    https://PBS.twimg.com/Media/BS4ARIaCAAAUDG_.PNG

    Hello

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

    http://social.technet.Microsoft.com/forums/en/category/w8itpro

  • Satellite A85-s107 - white screen at startup by using the power of the battery

    Satellite A85-s107 white screen at startup by using the power of the battery

    When I boot A85-s107 in battery power, it is get booted up in the background, but my screen is empty.
    After that if I connect it to AC power and switch deactivation/activation of the laptop power button, the screen comes back to life.

    There is no problem when I start upward when it is connected to an electrical outlet.
    Battery is fully charged and computer will work off the battery voltage if I remove AC after boootup

    Any suggestions?

    PS:

    also note that when I remove AC and then reconnect I start the computer on two occasions that it does not start the 1st time?

    Don t need to recharge the battery if the AC adapter is plugged ;)
    Try the tips posted by Alex otherwise it of a hardware problem, in my view, there seems to be something wrong with the motherboard...
    In this case, only the replacement could help and it could be a costly affair

  • Battery Equium A300D - 16 c died

    I bought this laptop about 3 years ago and the battery died recently. I tried to replace it with a battery Toshiba not fitted with the part number. This battery does not work.

    When I put the game in and it rebooted the laptop would make mention of the fact that there is no battery and the battery light would flash.

    However when I unplugged the laptop would run off the battery voltage but the laptop still say that there is no.
    I assumed that this battery was defective if returned and bought a Toshiba battery which is manufactured by Toshiba and the same battery as my old man.
    It is the same part number as my old battery challenge, but he has the same problem as the previous battery.

    I've updated the system BIOS when I bought the first laptop battery so I don't think that.
    I also downloaded another program for battery drive called "Battery maintenance", but he also says that the battery does not exist even when I unplug and run the laptop off the battery said.

    The original battery supplied with the laptop to purchase is yet recognized but keeps only fees for about 15 minutes due to age.

    Someone at - it ideas?

    Thank you

    Hello

    I let the laptop connected to the power adapter with the purchased new battery any longer. Leave it connected a throughout the night and then recheck if the battery is charged.
    You must also set the BIOS to values by default while the new battery is connected.

    Finally and above all I advise you to buy the battery directly from Toshiba ASP in your country. In this case, you can be sure that you would get from the original parts that are 100% compatible with the portable 100%

    You know...

Maybe you are looking for

  • Screen sharing causes Skype to crash

    Hello Whenever my colleague attempts to share their screen with me, Skype crashes. There is no problem in sharing my screen with him. I tried to remove the program and reinstall - it worked the first time thereafter, but today it happened again. Can

  • FCB-EX980SP

    I use the specified security (FCB-EX980SP) camera in my project.When I integrate into my system, I see restore image on the screen.Video decoder PST IC 5146 and ADV 7343 video Encoder IC is used in my project.When I connect it to another camera its w

  • Pavilion P6000 Officejet: printing envelopes

    I use word Microsof Office 2013.  I followed the instruction I used on previous HP printers. The printer is not picking up envelope.   Instead it will pull the paper and print on paper

  • RT autonomous VI

    I created a standalone application and set it as start. Is it possible for a VI running on RT to distinguish if its a standalone application running? The thing is when I decide the PC VI, I need to monitor certain data (for debugging) but when runnni

  • Target class: listbox (strict)

    Now make a constant specifier class in a listbox control that has a mode of selection of an element, I do next: right click-> Create Reference-> create Constant. It feels like there is probably a lot less awkward way to do it, but I can't figure out