Office locks upwards and not Windows Server 2008 R2 remote let me reconnect

Similar Questions

• Office Jet pro 8610: Office Jet pro 8610 for windows server 2008 R2

  I got the new Office Jet pro 8610 prither but does not have the driver for "Windows Server 2008 R2 Enterprise" 64-Bit.

  What to do now. Can you please provide?

  Thanks in advance.

  Hello

  The same driver as expected for any operating system like Windows 7 or 8 must be used, however, the installation should be launched via the command line and not as a standard installation.

  Follow these steps to install the software of the printer on a server:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8610-e-all-in-one-printer/5367603/model/5367606/document/c03351547

  Shlomi

• Windows Server 2008 SP2 remote management for the

  I am trying to install windows on windows server remote management 2008, but it continues to tell me that this update is not appy to this system.  I'm trying to manage windows Server 2008 Windows server 2012.  I have the updated 2012 in place like active directory and Server 2008 as a file server.  I like to leave the file as a unit without a head server. Any help would be great!

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Pavilion p6110t CTO Desktop: drivers for Windows Server 2008 and HARD drive problems

  Recently, I had the hard drive with my OS failure. After replacing the hard drive and reinstall windows server 2008, I seem to have encountered some problems with drivers.  After insalling Windows, I had 3 items in my device manager that not have installed correctly. I could get the driver for the LAN port to work, but I did not get the driver to "Standard VGA Graphics Adapter" and "SM Bus controller". After a little research, I believe that the graphics card is a Radeon HD4350. With this information, I still have been unable to toinstlal the correct drivers or the other of these elements. I tried several drivers listed on the support page of the drivers on the HP website, but all fo return them the same error of not finding the right operating system. The link to the driver, I used initially on my previous installation seems is no longer valid.

  Also, I can't access two additoinal hard disks (sata connected). They were used with the previous installation of windows without any problem. They appear in the Device Manager but do not show in my computer. A removable disk appears that I don't know what it is. Previously I used the software to mirror one of the disks on the other in order to avoid the loss of data if a disk fails. Is one of the above players with not be able to access the drives causing the problem or the software used before the problem?

  Any help on these questions is greatly appreciated.

  Ok.

  I can't help you with the readers then.  It is out of my area of knowledge.  If they are healthy and active in the disk management utility, then that's all that I know these should be reported.

  As for the graphics drivers...

  Download and install this free utility for files.

  http://www.7-zip.org/

  After installing 7 - zip, right-click on the graphic driver file and select 7 - zip from the list of options.

  Choose 7-zip to extract to: and leave it to unzip the file in a folder.  I have it extracted the file name of the file.

  Then just follow the rest of my instructions to install the driver.

  Of course that you you first go to where 7 - zip extract the folder and continue from there.

• Windows Update will not install the hotfix on Windows Server 2008 R2 Service Pack 1 KB3122648

  Hello

  I tried several times to install "MS16-019: Description of the update of security for .NET Framework 3.5.1 in Windows 7 Service Pack 1 and Windows Server 2008 R2 Service Pack 1" on a Windows Server 2008 R2, running Service Pack 1

  Windows Update has always ends with 'Failure' / has encountered an unknown error. Code 80073712

  The convenience store has not solved it either.

  The server is not really exposed to 'outside' as such, runs in a local network, regular, small; but sometimes, a web browser may be in use.

  Is there anything that can / should be done here to remedy the failure of the installation? Or free time and even not to worry about this?

  It would be great to have a few strong indications here. Thank you!

  System File Checker shows errors that are likely to cause problems with Windows Update. I would like to reinstall Windows Server 2008. That said, I have no direct experience of Windows Server 2008, so I'm not really able to help you.

  The Microsoft Community Forums are intended to provide support in hand to hand for users of Microsoft products. These products are not Windows Server 2008. You can request additional assistance through the TechNet forums:
  https://social.technet.Microsoft.com/forums/en-us/home

• VHD for evaluation of Windows Server 2008 R2 not accepting not a password on the Microsoft Web site

  Hello

  I recently downloaded and installed Windows Server 2008 R2 evaluation VHD on my Hyper-V using the link below.

  Title: Windows Server 2008 R2 Evaluation VHD for Hyper-V Images (180 days)

   

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16572

  However, every time I get the username and password as "Admin" & Pass@word1 mentioned in step 12, in accordance with the instructions, that I get the error message below.

  "The user name or password is incorrect"

  My data from the computer

  Operating system: Windows 8 Pro

  The use of Hyper-V

  Can someone help me?

  Hello

  The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads

  I hope that helps!

• Pavilion c 500-467: windows server 2008 display driver

  I am running Windows Server 2008R2 64 bit on a pavilion with a HP2509m monitor 500-467c. Which shows the driver works with this combination of material? I see Windows 7, 8 and 10 64-bit on the driver list, but not Windows Server 2008.  Help please!

  Hello:

  You want to try the W7 64 bit drivers for 2008 Server R2.

  Try to install the drivers manually if automatic installation method does not work.

• Error 0xc00000e9 on Windows Server 2008 std

  I have a Dell Poweredge R410 which works well for over 3 years now and has Windows Server 2008 std 64 bit.

  At Christmas, let him download and install updates.

  But going back, I found it displayed error '0xc00000e9' and ' boot manager is missing or damaged.

  I tried to repair by original DVD disc but I can't find the installation of windows 'fix' and on that list, empty it.

  If I try to boot with the disc of Windows 7 Pro, I can see the existing installation of windows.

  How can I fix this server?

  I can not format because of the payload inside.

  Any help?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How to redirect printing from server to windows server 2008 R2 on windows XP sp3

  I have install windows server 2008 R2 Remote Desktop services. After you have configured the terminal server server, I can connect form on Windows 7 server and windows XP. Redirection of printing is available in WS_2008_R2. I can easily print my document from server to windows 7 using remote desktop, but can not print the document in windows XP.

  Please help me...
   

  Hello

  I suggest you post the same question in the Microsoft Technet forum for assistance.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• PowerEdge 2850 - trying to install Windows Server 2008 R2 from USB

  Hello

  Let me start with this: they gave me this server by a friend, and I thought it would be a very rewarding experience.

  I want to install Windows Server 2008 R2 from a USB key. I already formatted the USB drive by using diskpart and implemented the fat32 file system. Then I went on the Windows site and downloaded Windows Server 2008 R2, which is a NTI .iso file and which resulted in the new format USB key

  On the server, I already put 'Manage USB Controller - with bios' and changed the sequence of drive for the "emulated hard disk USB flash drive" at the top.

  Now on the screen of boot sequence, after the press for installation of BMC, he says ' remove disks or other media. Press any key to restart"

  What's not here? Shouldn't I see a Windows Server set up the screen? I'm not there is something very basic I'm missing, but any help is appreciated.

  Thank you!

  Remove the USB when it restarts the first time :)

• Impossible to install Windows Server 2008 64-bit edition

  I'm under ESXi 3.5 on an Intel Core 2 Quad CPU Q8200. When I try and install Windows Server 2008 64-bit edition, I get the error that the processor is not compatible. Could someone please help. Thanks in advance.

  I withdraw that.  Looks like the Q8200 don't have VT - x.  As such, it cannot run 64-bit guests.  See KB 1901.

• move win2003 10.2.0.3 - db to windows server 2008 64 bit 32 bit

  Hi friend;
  
  I have my doubts, I have win2003 32 bit and 10.2.0.3 OS db (for ebs r12), I need to move db to windows 2008 64 bit. I am the following note:
  With the help of Oracle E-Business Suite Release 12 with a single platform of database Tier on Oracle 10 g Release 2 [ID 456197.1]
  
  The question is that:
  My source db is 10.2.0.3, during the remark, I need to create the home new oracle on win2008. I found 2 links for installation of db:
  
  Oracle Database 10g Release 2 Standard Edition, Enterprise Edition and Standard Edition One
  
  Oracle Database 10 g Release 2 (10.2.0.4) for Microsoft Windows Vista x 64 and Microsoft Windows Server 2008 x 64
  
  and
  
  Oracle Database 10 g Release 2 (10.2.0.1.0) for Microsoft Windows (x 64)
  
  
  I wonder if possible to use Oracle Database 10 g Release 2 (10.2.0.1.0) for Microsoft Windows (x 64) to win2008 too? or I need to download Oracle Database 10g Release 2 (10.2.0.4) for Microsoft Windows Vista x 64 and Microsoft Windows Server 2008 x 64?
  
  PS: Do not forget I 10.2.0.3 on the source server
  
  Thank you

  user12203572 wrote:
  Hi Alex

  Yes, these steps are correct, but after the third stage (backup (dbf) cold copy from source to target) thenyou need to make my third step above (3.Startup of the database with the mode upgrade as below) in my reply

  You mention below step:

  2. transfer this backup on target server (windows 2008 64-bit and 10.2.0.4), Create new service oracle using oradim (oradim-new - sid intpwd - syspass - pfile 'pfile_location') *.< i="" wont="" do="" it="" coz="" note="" doesnt="" mention="">
  3 database starting with the mode upgrade as below
  Set ORACLE_SID =
  sqlplus "virtue sysdba".
  Startup pfile upgrade = "pfile_location.
  @$ORACLE_HOME\rdbms\admin\catupgrd.sql;
  stop immediately;
  Startup pfile = 'pfile_location.
  @$ORACLE_HOME\rdbms\admin\utlrp.sql;
  Create spfile from pfile = utlrp.sql;

  But in the note, he just says:
  Database of option C) migrate Windows 32-bit Windows Itanium or x 64 Windows

  To move the Windows 32 - bit Windows Itanium or x 64 Windows database, follow these steps:

  Copy the files (.dbf) database of the source on the target computer computer
  Copy the configuration of database init.ora and ifilecbo.ora files
  Change the configuration on the computer files target to reflect the new environment. In addition, the value systemtrig_enabled = false
  Startup of the database in nomount mode
  Recreate the database control files
  Upgrade the database from 32 bit to 64 bit (modules of pl/sql recompiles and change the size of Word) running utlirp.sql and utlrp.sql (in ORACLE_HOME/rdbms/admin /). See the sections use and notes in each of these scripts for instructions on how to execute them.
  Delete systemtrig_enabled = false of init.ora
  Stop and restart the database normally

  And don't forget it's db E - Business Suite, still belive that I need step 3? Coz he doesn't mention in the footnote, I just want to be sure my friend. Thank you for your understanding

  These steps are correct, there are no problems. I also wanted that same sweet Oracle is the same, it need compile and upgrade of database objects, due to this there version OS and architecture is different (32-bit and 64-bit). As you mentioned the upgrade of database you can instead of my third step as

  Upgrade the database from 32 bit to 64 bit (modules of pl/sql recompiles and change the size of Word) running utlirp.sql and utlrp.sql (in ORACLE_HOME/rdbms/admin /). See the sections use and notes in each of these scripts for

• LAN driver for Satellite L505 - 10Z PSLS3E on Windows Server 2008

  Hello world

  We hope to find a solution for my case.

  I have Toshiba Notebook (PSLS3E-L505-10Z) and installed Windows server 2008 on it, but I can't find the driver Lan for this OS. Could guide you please solve me this problem, because I lost a lot of time to research on the toshiba Web site and with no valid result realtek Web site.

  Thank you

  Hello

  Windows Server 2008 is based on a Vista/Win 7 OS.
  It s like the same situation 5 years ago. Win 2003 server was based on Win XP and all the drivers Win XP are compatible with Win 2003 server.

  If you are using Windows Server 2008, then you should try the Vista/Win 7 drivers!

  Good bye

• Impersonate user without privilege preferred to access the registry on Windows Server 2008 key/value.

  Hello

  I'm trying to impersonate another Administrators\ [an other domian user] to do some access to the registry key/value with an Administrators\ [my domain user].

  Failed with some registry access denied.

  The code is quite format.

  1. the user to logon: LogonUser (username, domain, password, LOGON32_LOGON_INTERACTIVE, LOGON32_PROVIDER_DEFAULT, Ref token)! = 0)

  2 DuplicateToken: DuplicateToken (token, SecurityImpersonation, ref tokenDuplicate)

  3 impersonate another user:
  m_ImpersonatedUser = new WindowsIdentity (tokenDuplicate);

  using (m_ImpersonationContext = m_ImpersonatedUser.Impersonate ())

  {

  access to the registry key.

  ...
  }

  This works on Windows7 and some windows server 2008, if the new WindowsIdentity.AuthenticationType is "Kerberos", then it works, but if it's the "negotiation", it will fail.

  Can someone tell how to force the AuthenticationType to be "Kerberos"?

  Thank you.

  Hello

  I suggest you to ask your question at the following link.

  http://social.technet.Microsoft.com/forums/en-us/101ed379-ba6c-4974-BF47-c0e068515116/Server

• How to disable the product key Windows Server 2008 R2 on Oracle Virtual Box?

  Original title: disable the windows server 2008 r2 key

  I have oracle VM and activated windows server 2008 r2 on a virtual machine. I just VMware workstation God 9 and I would like to reactivate in a VMware virtual machine. How can I disable the key so that it can be reactivated?

  Click Start, type: CMD
  Right-click on CMD
  Click on run as administrator
  At the command prompt, type: slmgr.vbs - upk

  Press enter, this will uninstall the product key of the computer and to the evaluation mode, you are now free to use it on another computer. If you experience problems, try to activate by phone:
  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.