officeal Windows 7 copy

Similar Questions

• I need to copy the towel on my home network from my Office Windows 7 on my Windows 7 laptop.

  I need to copy the towel on my home network from my Office Windows 7 on my Windows 7 laptop.  I have no idea. Could someone help?  Thank you.

  For some reason any, that I can't understand, I can't see the files of each computer through the network.  Any computer, I click on I see the desktop computer files and not the laptop files.  I decided to use the Briefcase with a USB stick rather than make me crazy.

• Software to insert text in a photo and then take pictures of Windows to copy on an external USB to print at the pharmacy. Thank you

  You know a software product to insert text in the photo and then take pictures of Windows and copy on an external USB to print at the pharmacy. Thank you

  To achieve this product is Adobe Photoshop http://www.adobe.com/products/photoshop/family/.  This not only allows you to do, but allows you to manipulate pictures in almost any way you choose above all.

  If you are looking for a less expensive solution (although nowhere near as functional), then Microsoft Photo Editor free http://www.brothersoft.com/downloads/microsoft-photo-editor.html will probably do the job for you.  In addition, you can try the free Microsoft Office Picture Manager 2003 to http://www.brothersoft.com/microsoft-office-picture-manager-171868.html.  I suggest that you try the free options to determine if it meets your needs before you spend money on Adobe Photoshop (as good as Photoshop is).

  All these programs have the ability to record in a variety of formats - certainly, including that which can be handled by your local drug store (call them to check to determine what types of extensions that they can support and don't forget to use this format when you are working with your photos).

  Good luck and I hope this helps. Lorien - a - MCSE/MCSA/network + / A +.

• For the Office Windows 8, I don't have a Skydrive folder, where is he?

  In the application of the file Explorer mode Office Windows 8, Im supposed to have a Skydrive folder on the left.  I don't have it.  I have Skydrive works correctly on the view of Metro.  I would copy and paste some pictures of the film Skydrive folder of photos on my hard drive, but I can't do in the subway application.  Where is my skydrive in desktop?

  In the application of the file Explorer mode Office Windows 8, Im supposed to have a Skydrive folder on the left.  I don't have it.  I have Skydrive works correctly on the view of Metro.  I would copy and paste some pictures of the film Skydrive folder of photos on my hard drive, but I can't do in the subway application.  Where is my skydrive in desktop?

  Hello

  Go to the following site.

  Microsoft SkyDrive - Microsoft Windows:
  http://Windows.Microsoft.com/en-us/SkyDrive/download

  You can download and install the Skydrive Desktop application here.

  After installation, it will automatically sync with your online Skydrive folders.

  Concerning

• Why not remove images from my office window and screen saver?

  You have a thorny problem and a bit tricky here.

  A few months ago, at my work, I got a new iMac (for me). As I was getting started upward, furnished and ready to use, at some point it must be synchronized with my iPad, which was nearby. So, when I open my desktop and screen saver system preferences, I see a multitude of images that I took with my iPad and I somehow was stored and transferred to my work machine. One of these pictures is, shall we say, I don't like for anyone to see except my other significant... and it is possible that I can receive an offer for a new job at some point in the near future. Needless to say, I don't want to leave this pic on my machine here for someone else to run into.

  Problem is that I can't remove it. It won't let me select it; -button stays grayed out. The offensive peak is no longer on my iPad, but it remains obstinately to the view from my office window & screen saver system preferences. 1. Why can't select and remove? 2 in the world this image file actually location? I could trash it maybe, if I could find the actual file.

  To sum up, I want this pic from this machine, but I can't remove it now as it is. What can I do?

  

  Open the pictures folder in your user account and browse the library of Photos for the photo of the source and remove it.

• HP Envy 700-414: HP Envy 700-414 Office windows 7 64 drivers

  I didn't like Windows 8.1, because of crashes and recoveries almost every day. So I contacted HP, does not and according to the frustration, I erased the hard drive, disk recovery and all partitions and installed Windows 7 ultimate 64 not knowing not only desktop 700-414 HP Envy Legacy CMOS and HP support don't like no change of. Also, the biggest problem is supported for the HP Envy 700-414 Office windows 7 64 drivers are extremely hard to find, especially drivers LAN Modem, if they exist in HP supports. What can I do?

  Hello:

  This model has the same motherboard as you and has a complete set of W7 x 64 drivers.

  Do not use the BIOS or the files of the firmware of this model on your.

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-700-200-desktop-PC-series/5399651/model/6529898

• My Office Windows XP SP3 has been "glued" on stop, installation of update 6 of 12 for 15 hours and counting.

  My Office Windows XP SP3 has been "glued" on stop, installation of update 6 of 12 for 15 hours and counting.  I'm worried to turn it off because I don't want any major problems if it works again.

  Can someone please advise on what I have to do to go even faster.

  Thanks for any advice in the meantime.

  As a result of the survey above.  I 'bit the bullet"and shut down the computer and no damage seems to have been made.

  Time will tell I suppose.  Thank you

• How to upgrade Windows xp copy instalation

  I use windows xp since 2000 about

  I have old version of windows without service pack

  Can I upgrade to service pack 3, but I can update windows installation copy?

  because when my computer does not start I have to reinstall and update several times

  I have a genuine license of windows xp 32 bit home edition

  Hello

  Thank you for the update. You cannot directly install service pack 3 (SP3). You must install the service pack 1 or 2 before you install SP3.

  I suggest you to return these items for more information:

  Learn how to install Windows XP Service Pack 3 (SP3)

  Steps to take before you install Windows XP Service Pack 3

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• How to install a XP windows genuine copy?

  I have windows genuine copy installed XP, I want to format my C drive and install the healthy copy of mind once again, how do?

  "sebyfrancy" wrote in message News: 99dd1b62-035 b-405 d-9033-992aab8a7c0b...

  I have windows genuine copy installed XP, I want to format my C drive and install the healthy copy of mind once again, how do?

  Use the recovery disks provided with your PC, or recovery procedures. See your user manual.
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Microsoft Office, Windows 7 Starter

  Is there Microsoft Office Windows 7 starter edition? I remember seeing it in my list of programs, but he mysteriously disappeared.

  Microsoft Office comes free with Microsoft operating systems.
  You had a trial version of Office installed.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Upgrade Vista to Windows 7 error: "Windows cannot copy files required for installation. The files may be damaged or missing. Error Code Ox80070017.

  I am upgrading of Windows Vista Home Premium (32-bit) for Windows 7 Home Premium (32 bit) - but getting stopped everytime I try, I end up with a dialog box stating: "Windows cannot copy files required for installation. The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation. Error Code Ox80070017.

  What should I do to resolve this problem and allow full of Windows 7 installation? (my computer is a Compaq Presario V6000).

  Hello

  What installation media you are using?

  Method 1:

  Error 0 x 80070017 translates "CRC error" which means that the files that are copied from the disc are not making it to the hard drive with the same structure, which means that the 'original' the disk files are modified/changed/corrupted while being copied to the location of the 'destination' on your disk during Setup.

  This usually means a bad DVD, or an error reading on the DVD player.

  I suggest you follow the link and check.

  Upgrade Windows Vista to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7?T1=tab02

  Method 2:

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  WARNING: There may be loss of data through an analysis using firewall to eliminate the virus as appropriate

  Method 3:

  I also suggest you to follow the link and check.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• A Windows Explorer copy operation check after copying?

  A Windows Explorer copy operation check after copying?  I know that this should be an easy question to answer and I should already know the answer, but I can't find any info that confirms or not copy files and folders with Windows Explorer checks the copy after copying.

  I want to copy the contents of my old memory stick in my new and I want to make sure that all files and folders have made the transfer before their deletion on the old stick.

  I guess I could use the command line COPY or XCOPY between devices with the /V to check the switch.  I don't see that ROBOCOPY has a switch to check.

  Suggestions?

  There is no real way to verify with certainty that copies has been made correctly and that the copied files are all accessible, guaranteed the same as original, uncorrupted and otherwise to work.  Here is information on the switch/v:http://support.microsoft.com/kb/126457/en-us.  The BACK FC command (from the command prompt) is a better way to comparehttp://www.easydos.com/fc.html (or even the model commandhttp://www.windowsvistauserguide.com/command_line/command_line_comp.htm which is not as good as the FC command but not yet a comparison, but is not yet perfect (and it makes the whole process much longer and requires much more effort).  It is very unlikely that all copied very well - but there is no real control procedures which will ENSURE everything worked properly and that all the files can be opened and worked with.  The only way to be absolutely sure is actually check each file individually (and again, the new stick could develop the corruption of its own and damage one or more of the files even after you have confirmed it - it doesn't happen often, but it happens).  It's the nature of computers and storage devices.  If you are concerned, and then also copy the old stick on your computer in a special folder (I do with mine, just in case and I also back up this folder so it is even more protected).  Copies of chances of two (or three) is damaged or having problems are even more remote, and you have a backup (or two) in case something happens on the key (as you drop down a sewer or it gets crushed by a car or is exposed to a strong magnetic field that he wipes clean you'll just lose it or any number of other possible problems).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I try to use a pro 7 product key offical windows to activate windows 10 pro, but it does not work?

  I try to use a pro 7 product key offical windows to activate windows 10 pro, but it does not work?

  If I search on possible improvements, he says it should work?

  Try the chat support:

  Activate your Windows 10 license with Microsoft Chat support

• Windows cannot copy files required for installation. The files may be damaged or missing. Error code: 0 x 80070241.

  I had a lot of trouble trying to install the 64-bit version of windows 7 Home Premium on my 64-bit vista, and my question is multi-part. If it is relevant, it's my 2nd copy of windows 7 I have tried. Initially, I had the problem of not being able to run the installation on two copies with the error "'autorun.dll' could not be found or is damaged. Error code is [0x7E]. "However, I managed to get into with my 2nd copy installation after restarting my computer. Once in Setup, I got another error that stopped the installation that says "windows not could create an installation folder. Error code is 0 x 80070017. "Again, I rebooted my computer and started the installation again, this time following installation was decently through but stopped when I got the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. "I then backed up and restarted my computer and then tried to use the option to install custom but then got the error"E:\sources\autorun.dll is not designed to run on windows or it contains an error. Try to install the program using the original media, or contact your system administrator. "coupled with the error"the file 'autorun.dll' could not be loaded or is corrupt. Error code is 0xC1"again once I restarted and tried the custom option but got the error" Windows has no load the required file WinSetup.dll.» The file is possibly corrupted. To install windows, restart the installation. Error code is 0x3E6. "I restarted my computer and tried the custom triple option more and still have the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. »

  I understand that my problem is very complex, but it seems to be built around a missing or damaged file. Thanks if you can tell what's wrong or what to do.

  Tips for solving common problems when Windows 7 won't install troubleshooting

  1. start Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2 disable any security software, including anti-virus programs and firewalls.
  3 make sure that your computer has the BIOS and latest drivers.
  4. disconnect all external devices except the keyboard and mouse before installing.
  5. If your computer/motherboard integrated video use and remove the dedicated video card.
  6. If you have a large amount of RAM (memory), try to reduce the amount of RAM installed. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful.
  7. If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

  8. check your RAM (memory) to find errors. This can take some time.
  (A) Insert the Windows 7 DVD and restart the computer.
  (B) start from the Windows 7 DVD.
  (C) select your language, and then click Next.
  (D) click on "repair your computer" then select the operating system to fix it.
  (E) click on the link of the Memory Diagnostics in the system recovery menu.
  (F) the computer will restart and your memory is checked for errors.

  9 turn off startup programs:
  (A). Click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• My Acer Aspire One with Microsoft Office Windows 7 gives gives thefollowing error message "Microsoft Office Word has stopped working".

  My Acer Aspire One with Microsoft Office Windows 7 gimme gimme thefollowing error message "Microsoft Office Word has stopped working" is followed by "Windows is checking for a solution to the problem," then to "Windows try to recoverthe information" sometimes, he is able to recover and sometimes not. This can happen several times within 5-10 min.

  I'm almost illiterate with these things.

  Any help

  Thank you

  Original title: error message

  Go to programs-> Microsoft Office-> Office-> Office Diagnostics Tools.

  To test your installation

  You can also control panel-> programs and features. Select Microsoft Office in the list and select Edit in the upper part. The second Dialogue should offer the repair option.