OfficeJet 6600: Noisy printer

Similar Questions

• HP Officejet 6600: HP6600 printer does not print several fonts

  My HP 6600 does not print multiple fonts in the same email. It prints a series of boxes instead.

  My nephew has just solved the problem!

  On your computer, navigate to the Application folder, and then open the application font book, under all the fonts (left side), find Courier. If there is a yellow triangle next to Courier, there is an error, click on e-mail and click on solve automatically.

• HP Officejet 6600: my printer has been idle since 12/12/2014

  I'm back from my vacation here a break at the marin dealer that I work and my printer is dead in the water. (Perfect for a boat dealer analogy)

  As soon as I woke up the printer to be slowed for a little over a month, I had to replace all ink cartridges (and it is always showing black as being almost empty), I printed an article but now I get a generic message that there is a problem with the printer or ink system. I have it turned off and unplugged the power cord several times without success.

  Any advice?

  Well, I got running again in uninstalling and reinstalling the black ink cartridge. I guess that I faked out.

• HP Officejet 6600 print wireless help

  Attempt to try to solve my HP Officejet 6600 to print wirelessly on my network and I tried just about everything I could think of (including the rattling of my printer on the network to see if they are on the same network, they are) and my printer still does not recognize any signal from my computer trying to get a print of my computer job. I have already confirmed that my printer working via a USB cable, but I wish I could put my printer to another room, connected to a power source and be able to print to it outside of my network, but not luck so far. Can someone help with this problem?

  My OS is Windows 7 Edition Home Premium SP1, if this is useful.

  Review of my last post...

  Wow, regardless of the Printer Spooler service has been, which seems to have done the trick. Also went and made a new WiFi printer (when the USB cable is installed), and it was labeled differently. Somewhere in one of the configuration menus had something on this subject (assuming it's a hostname?) It said HPB96E1W (HP Officejet 6600). It was also the name of the printer that appeared when I installed it as wireless under printers and faxes. When I did as just a USB connected printer, it appears just as "HP Officejet 6600". Maybe a problem of labelling or something to do with the Printer Spooler service? No idea honestly but the printer works now move it to another part of the House as long as it captures my wireless signal. This problem is completely resolved, and I have also 2 different connections to work with incase I ever spend my printer back near my computer. Thanks to all who have posted in this thread with ideas help, much appreciated. Moderators or anyone who may lock this thread if they wish. I'll post another thread one day if I have problems with the printer again.

• Portable printer HP Officejet 6600: need of digitization program

  I bought my printer HP Officejet 6600 in January 2013.  I've installed all the programs on my old computer (Windows Vista). With the installation, I was able to print electronically, and there is a stock of Scanner program that allowed me to scan a Document or Photo to my computer. I recently bought a new computer (window 10).  I tried to use my HP disc to download these printer programs but was unable to do that because I got a message that the disc did not support Windows 10.  Can you help guide to get the programs of HP that I could access and download to my new computer which would give me the possibility to print electronic and scanned documents and photos (not via the USB port)?

  Why don't you just download the software Win 10 out of the HP web site for your printer. A simple search returns... http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-6600-e-all-in-one-printer-series---H7/4322968/model/4323587

• OfficeJet 6600 / Officejet 650: roblem recognition new printer when printing to adobe files

  Having a problem with my Officejet 6600 when I try to print a file "adobe". The problem is that the onl print window shows my previous printer that was n Officejet 6500 E709n. I NC does not change this in the print window. I have removed all traces of the Officejet 6500 E709n of my system and have reinstalled the current printer from the disk.

  Any ideas? Need help.

  TallPal1

  Hi @TallPaul1,

  Since you seem to be able to print from other programs, I think that the question has something to do with Adobe. Maybe you will find the following article, I found the site useful adobe: PDF print troubleshoot | Acrobat, Reader.

  If the problem persists, it may be preferable for you to reach the Adobe community.

  Good luck! If there is anything else I can hep you let me know. Please go on the HP Forums!

• HP OfficeJet 6600: Printer Office scanning does not work

  I have 3 PCs that have been updated with 10 windows and all had the upgrade to the software and drivers proposed for 10 Windows of the software of the printer.

  Alone is capable to scan himself. This is done by using the HP Officejet 6600 icon to access to the

  "C:\Program HP HP Officejet Officejet 6600.exe 6600\Bin\HP" - launch UDCDevicePage

  (also available in an earlier version of the software and not available on the other pc).

  This open a page with a sweep, a document or a Photo option, which allows me to scan a document.

  Can you help me please why scanning works on a pc and not the other 2

  Managed to find a doctor Print & Scan and problem solved and can scan all 3 printers

  Thank you

• OfficeJet 6600: iPad suddenly can not find wireless HP printer.

  iPad, suddenly cannot find a working HP officejet wireless printer!  He worked recently.

  Hey @dburbage,

  Welcome to the Forum from HP Support.  I understand that you are unable to print from the iPad using your HP Officejet 6600 e-all-in-one printer.  I want to help you with this and can have steps that you need to restore this functionality.  What you describe, it seems that you use AirPrint.  I will answer my advice for this type of installation, but if you use ePrint, please let me know and I'll give the information you need.

  You have confirmed that your printer is connected to your wireless network?  Button on the front panel of the printer the wireless icon and make sure that it is connected and displays an IP address.  If this isn't the case, run the Wireless Setup Wizard to restore connectivity.  If you are connected, powercycle your equipment as explained below:

  1. Unplug your modem/router
  2. Turn off your printer and your iPad
  3. Wait 60 seconds
  4. Plug in your modem/router back in and wait that he reconnect to internet
  5. Turn on your printer and once it starts up as normal, confirm that it is still connected to your wireless network
  6. Turn on your iPad

  After completing these steps, you are able to connect your printer with the iPad?  Please let me know the result of your troubleshooting by responding to this post.

  Have a great day!

• OfficeJet 6600: Failure of printer, no error code

  Down printer, no code error.  Tried troubleshooting tips; Reset no has not worked and cleaning of copper on the ink cartridges, not working anymore.   Printer 3 years so out of warranty.   This printer is in a holiday home and I remove the cartridges in the winter.  Is this a problem?  Is there anything else to try, or do I need a new printer?  Tried to submit the form to contact HP 3 times for nothing helped... the site could use improvement.

  Remove the cartridges to store the printer for the winter is a major problem - which cause the printhead not replaceable to dry out, leaving probably clogged ink residues.  In the future if you have a printer with separate ink supply and print (like the Officejet 6600) heads the cartrdiges never be removed from the printer for more than thirty minutes at a time, and the printer should never be put off with the cartridges removed.

  The following may help recover the printhead (maybe 10% chance).  Turn on the printer, remove the cartrdiges impression and drip hot water on the screens on the print head which would connect the ink cartridges.  I put about 3 to 5 drops in each screen.  Let it sit for a few minutes, then replace the ink cartridges.  Run three cleaning cycles in quick succession the façade or the Toolbox.  Is there an ink at all on the page?  If yes let the printer sit overnight, then repeat the process.

• HP Officejet 6600 Guard giving the message there is a problem with the printer or the ink

  HP Officejet 6600 Guard giving the message there is a problem with the printer or ink. We have already tried to turn off then, have you tried unpluging and nothing works

  OK so I solved my problem normally my printer tells me what was low on ink im although there no and homesick, that I had to replace an ink catrige and his works now

• OfficeJet 6600. Works as a printer, but not able to start the scanner.

  OfficeJet 6600. Works as a printer, but not able to start the scanner.

  I am facing a strange behaviour of my camera. I tried to find similar problems on the forum, but did not succeed.

  I started it 2 days (near my 5610 old which seems to have problems of aging). I use a Sony VAIO PC, OS Win7-Pro, updated.

  Running the appliance following the instructions of the poster. Presents the installation CD. Wireless net was successful and the screen of the device is to give the corresponding IP address.

  But this IP has realized the configuration SW is not recognized. I tried thousands of times, switching and on different devices (router, printer and pc) in the order required, uninstall and reinstall the device.

  However, despite the property intellectual not recognized the device functioning as a "printer".

  But I need to use it as a scanner.

  Procedure by selecting the "scan to PC" screen of the device (only available as an option) I get the message "to ensure that the feature is turned on" and I am prompted to 'open the printer HP SW,... '. ».

  Go to Windows and by clicking on "HP SCAN" in the HP/HP Officejet 6600 directory I get the a warning window stating "HP Officejet unidentified 6600.

  Can someone, please?

  Thank you in advance.

  Hey,.

  Try this document! A "no computer has detected" or "Connection error" message when scanning for HP Officejet 6600 e-all-in-one and 6700 Premium e-All-in-One Printer Series (H711)

  Have a great day!

• OfficeJet 6600/6700: I lost my cd for printer hp officejet 6600/6700 and im having trouble it is online

  How can I install the printer on my computer with the CD

  Jessica,

  Welcome to the Community Forum of HP.

  The following can help:

  Install full software features - OfficeJet 6600

  Install full software features - OfficeJet 6700

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• OfficeJet 6600/6700: How can I stop my HP Officejet 6600/6700 stop printing reports?

  I just installed a new HP Officejet 6600/6700, but whenever I have to send a fax it produces a report. If I misdial or there is no answer, it also sends a report. I see these just a waste of paper and ink. How can stop the production of reports - I have looked through the manual but find nothing in there to help. Thank you.

  Hello

  Please try the below mentioned steps that should solve the problem.

  On the front panel of the printer

  Press SETUP (wrench) > Fax Setup > Fax reports >
  the Fax Confirmation Off = value
  value = Off Fax error report

• Portable printer HP Officejet 6600

  The printer message is "there is a problem with the printer or the ink system, the printer Tower, then on it." I did this as unplugging the power supply. I also replaced the ink cartridges and checked paper supply and rolls. The message remains. Any suggestions?

  MB

  Hello @mmoo,

  Welcome to the HP Forums!

  I understand that you receive a message on your ink system indicating Officejet 6600. I will do my best to help you! Please make sure that the printer is connected to a live wall, not a surge protector. I just want to see if that makes a difference.

  Please follow this HP document 'Problem with ink system' error message. If you receive the same question, please contact HP technical support for further assistance. Click here to read: worldwide Contact HP.

  Good luck.

• HP Officejet 6600: problem with the printer or ink system

  I have a HP Officejet 6600. I replaced the black cartridge with a new HP black ink cartridge. This message keeps poping up, there is a problem with the printer or ink system. Turn the printer off, then on. If the problem persists, contact HP. It gives me as two solutions. Solution 1: Reset the product. Turn the product off, and then unplug the power cord. Plug in the power cord and then press the key to activate the product. I've done this three times. Second solution: contact HP support note the error code provided in the email (I looked and it does not give me one) then he says, supported to contact Hp. go to: www.hp.com/support. Needless to say that this message keeps appearing on the screen of the printer and I can't do anything with the printer. Can anyone help with an idea? Please, I beg you.

  Hey @popcorn101,

  Welcome to the Forums of HP Support!

  I understand that you get the error "printer failure: there is a problem with the printer or ink system' on the front panel of your HP Officejet 6600 e-all-in-one printer.". Thanks for the troubleshooting steps that you received before reaching out for support, including. Right now, you have completed all the troubleshooting steps available in your efforts to solve this error in accordance with the document of support here. The failure itself is probably due to a failure of the print head. The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the print head does not, then the printing within your product system has failed. In this model of printer print head is a non-replaceable. Therefore, the resolution is a replacement of the entire unit.

  I highly recommend at this stage that you contact our Technical Support telephone queue for discover hardware replacement options.

  HP technical support are available by clicking on the following link:

  Contact HP support

  (1) once the page opens, please select the country in which you are located. Then, enter your HP model number on the right.

  (2) choose the 'Contact Support' tab at the top and scroll down to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click on the 'Show the Options' icon in the lower right.

  (4) Finally, scroll to the bottom of the page and select 'phone number.' A file number and telephone number will now fill for you.

  I wish you good luck going forward with this!