OFFLINE GMAIL SMTP

Similar Questions

• Failts Thunderbird to gmail smtp - ssl_error_inappropriate_fallback_alert

  I have a new one install a working XP machine. The same version of install on a XP home machine doesn't have the same problem with the same gmail accounts.

  On the machine to work with a clean install of 31.3.0 thunderbird, I can't use gmail smtp services. Other services smtp to yahoo and my own domain name to work properly.

  The error log;
  Timestamp: 07/01/2015 08:01:35
  Error: An error occurred during a connection to smtp.googlemail.com:465.
  The server has rejected the transfer protocol because the customer to a lower version of TLS on the server supports.
  (Error code: ssl_error_inappropriate_fallback_alert)

  According to the guide for a firefox problem, I followed the recommendation to change the "security.tls.version.min".
  https://support.Mozilla.org/en-us/questions/1038836

  For the values 0 and 1, the same error log appears. For the values 2 and 3, that no error log is written in the error console still send mail always fails and;
  The message send failed.
  The message could not be sent using SMTP server smtp.googlemail.com for some unknown reason. Check your SMTP server settings are correct and try again, or contact your network administrator

  Any thoughts?

  Sorry, double post of https://support.mozilla.org/en-US/questions/1040152

  Please delete.

• Thunderbird fails to gmail smtp - ssl_error_inappropriate_fallback_alert

  I have a new one install a working XP machine. The same version of install on a XP home machine doesn't have the same problem with the same gmail accounts.

  On the machine to work with a clean install of 31.3.0 thunderbird, I can't use gmail smtp services. Other services smtp to yahoo and my own domain name to work properly.

  The error log;
  Timestamp: 07/01/2015 08:01:35
  Error: An error occurred during a connection to smtp.googlemail.com:465.
  The server has rejected the transfer protocol because the customer to a lower version of TLS on the server supports.
  (Error code: ssl_error_inappropriate_fallback_alert)

  According to the guide for a firefox problem, I followed the recommendation to change the "security.tls.version.min".
  https://support.Mozilla.org/en-us/questions/1038836

  For the values 0 and 1, the same error log appears. For the values 2 and 3, that no error log is written in the error console still send mail always fails and;
  The message send failed.
  The message could not be sent using SMTP server smtp.googlemail.com for some unknown reason. Check your SMTP server settings are correct and try again, or contact your network administrator

  Any thoughts?

  If you use port 587, then set the connection to use security STARTTLS.

  In Thunderbird (not Firefox) "config editor" make sure you have this:

  • Security.TLS.version.Max; 3
  • Security.TLS.version.min; 1

• HP Officejet Pro 8600 N911g: HP Officejet Pro 8600 N911g Question add GMAIL SMTP

  Hello

  I want to have 2 shippers when I scan to email.

  My GMAIl SMTP works perectly.

  Those of my wife at all (test KO).

  Of course, I tried/retried the login/password, the firmware update (printer is up-to-date)

  I also tried tab setting (via web print server) the option "mail server". I filled SMTP ID my wife and it worked. (Test OK)

  Where is the problem?

  Thanks in advance for your comments

  Marc

  Hello
  Gmail offers several options of security which are not supported by the printer and it will block to connect to their servers.

  First, open the following link and ensure that you are connected to the same account that you are facing problems of implementation.
  https://myaccount.Google.com/

  In the section connection & security click on signature in Google and make sure 'The 2-Step check' is defined as 'Off '.

  In the left pane click on connected applications & sites and make sure that 'Access to less secure applications' is defined as 'ON', otherwise the check fails.

  In the left pane click peripheral activity & notifications, within the "security events" section click on the link to control events and make sure there is no connection blocked attempt (it will be highlighted in red), if there is no warning, proceed to the screen to ensure there is no block for this device.

  Once you are running a test for the outgoing user profile and check if the problem resolved.

  Kind regards
  Shlomi

• Gmail SMTP Incorrect salutation 10060

  I have been using Thunderbird to download my gmail for years, without any problem. I am currently on 38.4.0. In recent days, when you try to send an e-mail, I started having:
  An error occurred sending mail: the mail server has sent a wrong message: unable to connect to the server of SMTP 2607:f8b0:400 d: c08::6 c (2607:f8b0:400 d: c08::6 c: 587), connect error 10060.

  I changed the settings, so I wonder if gmail or Thunderbird changed (because it update?). I have my settings in the value of Thunderbird
  SMTP.gmail.com
  port 587
  STARTTLS
  Authentication: Normal password
  Username: [email protected]

  Thanks in advance for any help.

  Good server settings appear.
  Is there a personal firewall or a proxy server that may prevent the Thunderbird to connect to the server?

  Note that when you connect using OAuth2 the first time, you are prompted to enter your Gmail password in a browser window. It is your actual Gmail password, not any specific application password.
  After that, you are asked to leave Thunderbird to access Gmail.

• My GMail Goggle address is used as the return address

  I have set up my email accounts with email response answer such as email for the account, everything was fine and was sent the correct answer to the address until I have configure the SMTP Protocol to use my Goggle GMail because it is a laptop, and I move. Given that I've implemented using GMail as my outgoing server Thunderbird using my GMail username as my answer by email to the address in all my email accounts. I've looked everywhere, and is the only place in my GMail address as my user name in the SMTP server settings. How can I stop using this GMail address in my accounts and serve as a response to the installation address?

  When you configure the gmail smtp service, you declare an e-mail address for use with. Regardless of what "from:" address you use, gmail silently replace by associated, gmail address as you worked on yourself.

  If you use gmail smtp, you must 'connect' your other email addresses for the incoming (pop/imap) account with gmail. Register a non-gmail addresses on your settings page of gmail on the gmail website.

• Cannot send Mail from Gmail in Thunderbird

  I downloaded Mozilla Thunderbird, is the most recent version. I can receive mail, but cannot reply or send. I use a Mac mini, Mac OS X 10.10.1. A screenshot with the error code is attached. Help is very appreciated!

  -Jon

  Let's not the smtp port number. 993 is for incoming mail.

  All my gmail smtp settings use 465.

  How did you get this way?

• Eprint of site using Internet (print-php smtp code)

  Hello

  I'm a web developer and you have a website that is trying to send messages electronic smtp for a printer HP eprint for one of my clients.  The website basically built an HTML based email and sends via eprint to address of the customer.  I use a 3rd party SMTP (jangosmtp) service and confirmed that email is out of the service in the eprint address.  I never received a message from "eprint job received" and the print job does not print on the printer.  Emails are sent with one of"address" to [email protected]

  I tested the customer eprint e-mail address by sending an e-mail from the sample in my email (MS Outlook) and I get the email "eprint job has received" and it prints successfully.

  I don't have access to the account of the customer HPConnect, but I'm trying to order him to see if he can look at the settings for me or maybe see a history of emails that have been sent to the printer to see if it indicates a problem.

  Three questions for this forum: A) can you tell me if printing a Web page in this way is supported) B is there any direction I can give to the customer once he arrives on his hpconnect account to search for this, and C) is it possible to your printing service is seeing this as spam?  no way of knowing?

  Thanks in advance,

  Jason

  Hello

  Thanks for the reply.  I ended up finding this works by changing my 3rd party SMTP server and Google (Gmail) SMTP servers through (I had read somewhere that gmail is a messaging service supported the eprint service).

  To answer your questions about the configuration of the old before going through Google:

  1. Yes, I get the email on the site to my email address.

  2. I don't have a printer HP (does my customer only) - but I have an Epson WF3540 and it printed fine when using their e-mail to the print service.

  3. the client printer was ready to open to everyone.  I also go to only allowed senders and the address to the address [email protected] nothing helped, so I spent it to allow all the.

  4. Unfortunately, the collection shows no email for print jobs.  Even with this work through Gmail now the collections screen shows not all print jobs.

  Thanks again for the response.  Using the smtp servers of google seems to work very well, so I consider this resolved.

• SMTP password

  When you use the library of VI SMTP Email I get an error that says my password is incorrect.  I don't know what that means I can ensure you that the password is correct, and I'll post the vi with the passwords that the account is single use.  I can't look at what is happening in the Send.vi because it is locked.

  Mark R.

  Hello Mark,

  Unfortunately, I don't have big ideas but, after going through a lot of pain with gmail SMTP server, have a few questions:

  1. never change your settings in gmail to allow use by third-party applications?

  2 is bipartisan authentication enabled or disabled for your gmail account?

  3 have you tried to send e-mails from this VI to invalid accounts? (Can't tell you how long my gmail accounts have been disabled for emails rejected to bad addresses formed by program)

  4. do not forget that, for new accounts that Google is usually temporary, according to me, keep on sending emails programmatically. The account has been newly created when you tried to run the VI?

  Kind regards

• Email from WVC80N using Hotmail or Gmail?

  I'm on Qwest DSL cameria works very well.  I would use Hotmail which I understand does not.  Or Gmail using the Gmail SMTP server, but I can't seem to work yet.  I think that Qwest has Port 25 blocked, but I understand that Gmail has two active ports.

  If someone has done this?

  Okay, I went to Amazon to leave my a comment star and found an answer to the question of the e-mail.

  #1 seems the Gmail and Hotmail ports are blocked somewhere in my Qwest DSL or my Motorola modem.   Also, the camera may not be able to use SMTP SSL. It is one of the two.

  #2 sign up for a 'free' to Lavabit.com e-mail account.  The basic free account does not let you email forward that is the following to the top, but you have to put up with the text based ads.  I used this to test my email and after that I was working ok, I paid for the account of the year of $8.  If you can't pay $8 and then keep screwing around with what you have now, it works.

  #3 right use SMTP SSL not and you need your name (the Lavabit email) username and password for this account enter the camera when he asked for the authorization info.   Try different ports to the lavabit.com mail server, port 587 worked for me.

  #4 sensitive installation of motion detection does not work in Firefox, I use IE 8 and XP Pro and it was necessary to download the software to display the Setup screen.

  #5, I have my sensitivity set up a little to the left of the point central and full screen. It is set at 3 fps and 1 dry meadow and 4 sec after detection.  This gives me an email with 15 JPG.5 about Mb. sent to my Hotmail email account.

  NOTE: IF this works well for you, I'm happy for you.  But most of my solutions came from searching online a lot of trial and error.

  (Note to mod: under the guidance of the compliance of the directive.)

• Email alerts - iDRAC7 - Gmail

  Hi all

  I tried to get the alert e-mail to work with iDRAC7, but my test emails fail immediately.

  In our environment, we have a couple of NAS devices that have the alert e-mail.  I put to use port 587 and I enable TLS.  I also use a Gmail (smtp.gmail.com) as the e-mail server.  It works very well with my NAS devices.

  I would use this same account to gmail for email iDRAC alerts.  I activated Google Alerts and activated authentication.  I guess it will be port 587?

  Someone at - he had to work with a Gmail email alerts?

  I did some research and played a bit with the domain name and the dns name, but I got no chance (in the common parameters).  I have two DNS servers entered in the network settings.  I also tried just to put the ip address of smtp.gmail.com as the e-mail server instead of the name of trying to make DNS of the equation.

  Port 587 is permanently open on our firewall.

  Thank you

  In fact, I found a work around that I wanted to share.

  I have configured an internal SMTP relay server in 2012 from server to transfer emails to the gmail server.

  http://fmuntean.WordPress.com/2008/10/26/how-to-configure-IIS-SMTP-server-to-forward-emails-using-a-Gmail-account/

  In this way, port 25 may be used internally (iDRAC for relay server) and the port 587 TLS can be used to send to Gmail (smtp.gmail.com relay server).

• ORA-29278: SMTP temporary error

  Hi all

  database: oracle database 10 g 2

  OS - win 7

  I went through the following steps to send the mail to the oracle database.

  c:\ > sqlplus "/ as sysdba".

  SQL > @E:\oracle_home\rdbms\admin\utlmail.sql

  SQL > @E:\oracle_home\rdbms\admin\prvtmail.plb

  SQL > alter system set smtp_out_server = 'smtp.gmail.com:25' scope = spfile;

  SQL > grant execute on utl_mail to scott;

  and in the scott schema I will carry out the following procedure

  port 25 is running

  I test with the command-> telnet 127.0.0.1 25 and netstat-a

  Start

  () UTL_MAIL. Send

  sender = > ' [email protected] ',

  recipients = > ' [email protected] ',

  subject = > 'Test ',.

  message = > 'oracle Message ".

  );

  end;

  get the error

  ORA-29278: error temporary smtp

  Follow the steps listed here: send emails using the package UTL_MAIL Oracle and Google GMAIL SMTP server: jackass.io

• Alert SMPT alarm through Gmail

  Hello world

  I'm new here and new to VMWare.  I have a creation probleming SMPT with Gmail. Here are my settings.

  According to this site: http://email.about.com/od/accessinggmail/f/Gmail_SMTP_Settings.htm

  • SMTP in Gmail, password: your Gmail password
  • Of Gmail SMTP, port: 465
  • SMTP in Gmail TLS/SSL required: Yes

  Here is my configuration:

  SMTP server: smtp.gmail.com

  Account of the sender: [email protected]

  Welcome to the community - I think not gmail will act as a relay SMTP server - you need a server to relay SMTP =

• Sending yahoo address, responses from the gmail address

  When the responses of people went to my gmail address I assumed that I had sent to gmail. but I realize now that this is always happening! Recently an important email arrived in my gmail address when I knew that he should not have. I have received many mails to my yahoo address, it's just responses to an email from my yahoo address coming to my gmail address

  It is a 'witch hunt' with the gmail smtp server. It replaces in silence the ' from: ' address with its own.

  It seems to me that it would be safer if he has given the usual error message on the relay not be allowed.

• Gmail sends on Palm Pre (webOS 1.2.1)

  I just got my pre this week and overall to the top of my Exchange and Gmail accounts on it. Exchange is the principal and I can send some fine over there, but I can't get my gmail to send. The settings that I have are:

  Server - smtp.gmail.com
  Use authentication = we
  user name-
  -password
  # Port - 465
  -SSL encryption

  This seems like it should be the correct parameters and correspond to what my wife has on his meadow. I asked last night if it is successfully sent a message from his phone, and she said she had. I didn't ask if it was before 1.2.1 or not (she had his phone any longer).

  Despite what look like the right settings, I get an error everytime I try to send an email. Most of the time it says that the password is wrong (I've all spruced up at least 4 times... and I'm able to get my email IMAP very well). I'm at a loss as to what could be my problem.

  PS. It is a Google Apps for your domain account, and not a standard gmail account. I used these SMTP settings in Thunderbird without any problem... I checked again today that I could send a message via Thunderbird using gmail SMTP setting and I was.

  I ended up deleting the mail account and there time with the same exact settings, I had entered about 5 times already. For some reason any, it seems that change an exsisting account does not work! What a pain in the butt!