OLE works is not in the form of sample WU_TEST_106

Similar Questions

• Site of Tablet and phone do not submit the forms?

  Hi, I created a Web site by using office templates, Tablet and phone. My problem is the form on the Desktop works perfectly, but the Tablet and phone version sends no data to send. It does not present the forms. I tried new forms from scratch on the tablet and phone sites but still do not send the form to the email said that the site Office to submit too. Please can someone shed light on what my client is not happy. www.badabingedinburgh.com much thanks April

  -Check the field "E-mail to" in the form of layout of phone to ensure that the correct email address is entered in the field.

  -If the email is correct, you must send us your PHP files for forms of contact for the investigation.

  Thank you

  Sanjit

• HP Pavilion: Touchscreen doesn't work is not in the browser

  My touch screen stopped working specifically in Chrome.  It seems to work everywhere else, including IE.  It's probably a frame in Chrome or something on the computer settings I managed to accidentally change?  Thank you!

  Hi there @jexylou,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the chrome browser works only not with the touch screen. I'll be happy to help you.

  Open chrome

  Put this in the address bar: chrome://flags/#touch-events

  Change the setting "enable Touch events" "Automatic" to "Enable"

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• "Messenger Service, or the Net send command not working only not on the service remote computerhe.

  Messenger Service, or the Net send command not working only not on the remote computer, despite the messenger service is started "it works only if I restart the service.
  operating system is windows xp
  service pack 3

  Hi Charbel,

  Have you done a recent software or hardware changes to the system?

  This problem occurs because the Messenger service is disabled. The Messenger service must run on the destination computer to activate the NET SEND command.

  Because the service is already started, and you must restart the service, you can try to stop the service, change the startup type to automatic and start the service. Check if it helps.

  Please refer to the article to define the service as automatic:

  Programs or services that use the alerts service or the Messenger service do not work as expected after you install Windows XP Service Pack 2

  For more information, see the article:

  The NET SEND command may not work correctly on a computer that is running Windows XP Service Pack 2

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• USB doesn't work is not on the external hard drive

  I have Vista Ultimate and here I noticed recently USB not working only not on the external hard drive. I tried to update the drivers and the system responds with the most recent driver already installed. Verified the USB ROOT property and shows nothing when it comes to th Ext. HD but it sees the usb hub and head phones. An organization can help its driving me crazy!

  Hi Chaser07,

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  I suggest you try to use an external hard drive on another USB plug and check if it works.

  Method 2:

  Automatically diagnose and repair problems with the devices when the Device Manager does not detect your hardware, audio, USB, or other devices, or when your devices are disabled or does not.

  Click run now in the link below to diagnose and fix problems automatically.

  Hardware devices not detected or does not

  http://support.Microsoft.com/GP/hardware_device_problems

  Check whether the problem is resolved.

  Method 3:

  Click on the link below to run Fix it which will help you to solve the problem.

  Tips for solving problems of USB devices

  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx

  Check whether the problem is resolved.

  Method 4:

  Click on the link below and install the update.

  Rollup cumulative update for USB in Windows Vista Basic components

  http://support.Microsoft.com/kb/941600

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Desktop icons not working is not after the closure of the internet.

  Original title: all the answers - desktop icons stop working

  I'm having the same problem with the desktop icons not working is not after the closure of the internet.  Any solution yet?

  Hello

  1. from the desktop icons do not work?

  2. what happens when you try to open these icons?

  3. it happens only after the closing of the internet?

  4. do you use the Internet Explorer browser to surf the internet?

   

  Method 1: Run the following fix - it:

  Difficulty of broken desktop shortcuts and common system maintenance tasks:

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

   

  Method 2: Reset to follow icon cache the mentioned below as follows:

  See the following steps:

   

  a. right-click on an empty area of the desktop and click on personalize.

  b. click the display properties.

  c. under colors, select medium (16 bit) and click on apply.

  NOTE: If you have medium (16 bit) selected, then select Highest (32 bit) instead. Sometimes, you have to do a reboot first, then go to step d. try both ways.

  d. click on Yes to confirm the new setting.

  e. now, select the highest (32 bit) and click OK.

  NOTE: If you already have the highest (32 bit) selected, then select medium (16 bit).

  II. click Yes to confirm the new setting.

  To follow cache icon rebuild the below steps.

  a. Open Folder Options to select (round) display the hidden files and folders.

  b. open a Windows Explorer window.

  c. go to C:\Users\(User Name) \AppData\Local
  d. right-click on IconCache.db and click on delete.

  e. click Yes to confirm the deletion.

  NOTE: This removes the file to the trash. It is safe to empty the trash when you are done.

  f. close the window.

  g emptying the trash.

  h. restart the computer.

  i. When you come back, you will notice the size of the file IconCache.db is reduced, and the update is now the current date. (See screenshot below)
  NOTE: If for some reason any IconCache.db isn't there or the size has not changed much, then just restart the computer again. You may need to restart a few times in some cases.

  j. the icon cache has been rebuilt.

• Search works is not in the people app

  When I search in the people App, I have 'no result '.  I tried to uninstall and reinstall the suite app people.  Is there any solution for this?  I should be able to search a person's name.

  Hi Jim,.

  Welcome to the Microsoft community where you can find all the answers related to Windows.
  
  According to the description, you are having problems with the search function doesn't work is not in the people App.
  Proceed as from the link below and check if that helps.
  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app
   
  Answer to us if you are having problems with the people App or any other issue of Windows, and we would be happy to help you.
   
   
  Good day!
   
  Hope this information helps.

• I use LR 6.5 on an iMAC. Files RAF Fuji originally, I imported from an SD card worked and exported in the form of PSD and then after saving the files on an external hard drive RAF erased from Lightroom. I now want to import some RAF b HD files

  I use LR 6.5 on an iMAC. Files RAF Fuji originally, I imported from an SD card worked and exported in the form of PSD and then after saving the files on an external hard drive RAF erased from Lightroom. I now have to import some RAF of the HD files but LR shows them as dazed out and said that they have already been imported when I hover over the thumbnail. I have this problem when importing files in the same HD Canon CR2, and who have been treated exactly the same. Anyone got a clue as to why this is happening? Thanks, Phil

  Hi Phil,

  If Lightroom then reads these as duplicate files, it shows that they are already present in your Lightroom Catalog.

  You can search by file name and check if the image is present in your library.

  Kind regards

  Claes

• I downloaded the latest version, but the form page tells me to download the latest version and does not display the form

  I downloaded the latest version, but the form page tells me to download the latest version and does not display the form!

  Ok. Chrome has stopped supporting the player plug-in (for now). You'll want to download the forms by placing the cursor on the link, right click and check-in at your computer. Alternatively, you can try another browser such as Internet Explorer.

• LR 5 doesn't work is not on the new Macbook Pro.

  LR 5 doesn't work is not on the new Macbook Pro.  Have tried 2 CC downloads, download licensed 5.6 and 5.5 download licensed, all the results in the same thing.  It comes up with the screen base but no signs and gives that an error occurred when changing the modules.  Nothing I have tried seems to help.  He also said "start with lightroom mobile at the top on the left, although it said it's Lr 5.6.  Anyone else having problems?  Calls to adobe are no help and have to wait until Monday for technical support.  Surely this must run on a NEW laptop with any other installed software!

  Setup logs was very good.  Application installed but is not working properly.  Finally got Adobe support and it turns out be a file permissions error.  Had to add applications and myself as accessors of the Lightroom folder under ~/Library/Adobe/ path and set permissions to read & write (was read only for everything except system) and apply to all the cases closed.   Works fine now.  Including this here in case when someone else is going through this issue.

• Date picker not working only not on the quote form

  I inserted the date picker in a form field in my registration form CITES. It works in preview of web forms, but when I insert nothing happens. Here's the example site: http://coopsupport.businesscatalyst.com/

  I tried the insertion is in HTML and as a module and neither worked. What did I miss?

  Thank you. That pointed me in the right direction. This is the jquery script - 1.4.4.min.js. It was part of the model starting I used one of your model canned ecommerce sites. After removing that it worked. I could try to update the script to a newer version of JQuery and see how it goes. But we're all good now.

  Paul

• Why Thunderbird 38.1 suddenly treat the addresses of the list in the form of individual addresses, & dismiss them because they are not in the form user@url?

  When you try to send a message to a group set up in my address book, I get an error message [group name < updated the group description >] is not an email address valid because it is not the form user@host. You need to correct before sending the e-mail message. Thunderbird has apparently taken the description section and tried to treat it as an email address. In doing so, it changes the description of and the original format [names, name2, name 3] (with the exception of the hooks) of [< name >, name2, "name 3" >].

  The list of mail has worked with no problems until today.

  Zenos. thanks for the suggestion. Although he did not provide a direct solution, he pointed me a. Being reluctant to try to re-enter an address book with more than 1,000 entries, I saved the book and replaced by a backup copy of a computer when I heard the e-mail function worked as desired. I had the same problem.
  I tried to export the book to save what I could at least and ran into problems, I discovered since came from trying to export "all address books.
  Then, I opened a copy of AB. File MAB in Quattro Pro, where I noted PS split the description section of the list of mail problem in separate cells, from commas in this description. I went back to the address book, removed commas from the description, and my group e-mail went out as gently as might be desired.
  I would note that commas have been this likely description for 15 years or more and only now has caused a problem. I guess that's due to some changes in Thunderbird was last updated. Would be nice if we got warnings about this kind of change.
  Answer to my problem: remove the commas from the description in the properties of the list.

• JavaScript doesn't work is not on the page navigation

  Hello

  I have a manual tabular presentation on the emp table. There is a javascript function that calls for the deptno column change. If deptno is RESEARCH (20), then it turns off the field for this employee hiring date.

  
  The same function is called on page load using the threshold:

  $("[name=f04]').change ();

  
  It works fine when the page is loaded for the first time. When I navigate to see the next set of rows (for example, 16 to 30) then the javascript code does not work.

  
  An example can be seen on apex.oralce.com:

  https://Apex.Oracle.com/pls/Apex/f?p=30264:28

  
  Workspace: apex2014

  Username: forum

  Password: abc123

  Application: 30264 Dev2

  Page: 28

  Can someone explain why it behaves like this?

  Thank you

  ZKay wrote:

  I have a manual tabular presentation on the emp table. There is a javascript function that calls for the deptno column change. If deptno is RESEARCH (20), then it turns off the field for this employee hiring date.

  
  The same function is called on page load using the threshold:

  $("[name=f04]').change ();

  
  It works fine when the page is loaded for the first time. When I navigate to see the next set of rows (for example, 16 to 30) then the javascript code does not work.

  Can someone explain why it behaves like this?

  This occurs because the function is called only once the page loads, and therefore affects only the lines that existed when the page is initially rendered. Page navigation performs a partial page of AJAX (PPR) refresh that completely replaces a set of lines of form (including their properties dynamically applied) with a new series with different properties. It is necessary to apply the function whenever a new set of lines is displayed. The best way to proceed is to call the function using an dynamic after Refresh with a dynamic range action:

  Event: After refresh

  Selection type: Region

  Region:

  Action: Run the JavaScript Code

  Scope of the event: Dynamics

  Fire on Page load: Yes

  Code:$('[name=f04]').change();

  Note that rows 13 & 18 in your function cause errors of execution. As I do not understand the purpose of these that I commented on them in order to demonstrate the dynamic action solution:

  function test2(pThis){  // orpheus4192
    var v_item_value = pThis.value;
    var v_hiredate_item = $(pThis).closest('tr').find('td[headers=HIREDATE] input[name=f05]');
    var v_hiredate_button = $(pThis).closest('tr').find('td[headers=HIREDATE] button');
    var currIndex = $('select[name="'+pThis.name+'"]').index(pThis);
    var currRow  = currIndex+1;
  
      //alert(pThis.name);
    if ( v_item_value == '20' ){
        v_hiredate_item.prop('readOnly',true);
        v_hiredate_button.prop('disabled',true);
  
        //document.getElementById("f08_"+[currRow]).disabled=true;
    }
    else{
        v_hiredate_item.prop('readOnly',false);
        v_hiredate_button.prop('disabled',false);
        //document.getElementById("f08_"+[currRow]).disabled=false;
    }
  }
  

  Things are not helped by the mixture of techniques here. The code would be easier to understand and maintain if a coherent approach was followed. It is recommended to always use jQuery to select and manipulate items, then select the items of dynamically across the table from the declarative mode headers attributes, rather than trying to understand the absolute values of ID from the control of the name and line numbers. It's much more intuitive, generally requires less code and is waterproof later insertions and changes in the order of the columns. Potential problems are only the changes to the control type or the column alias (because the latter is generally required in the selector), but these changes are likely to occur less frequently.

  Do not forget that to get the headers consistent and understandable static ID selectors must be applied manually to the IR columns in APEX 5.0...

• sort order doesn't work is not in the library module

  Hi, I shoot events with 2 different cameras, using a pool to the other and back dozens of times switching.  When I come home, I import the maps of two cameras in Lightroom. In the library module, the small previews on the bottom sort by chronological order of capture OF the CAMERA.  meaning that it shows all the photos sorted by capture of the camera one time and then all the photos, sorted by the time form camera capture 2.  I have many, many would prefer if the form of photos, both sorted cameras sort by ABSOLUTE capture time, not a single camera, then another.  In the library module, select view/sort/capture time but it just doesn't work.  any help?

  Thank you

  Triple - make sure that the camera clocks have been set at the same period.

  The best way to do that is to display the date of capture under the thumbnails mode grid library. In the library, view > Display Options and set the low label or the top of the Compact cell Extras to capture Date/time. Then set View > grid view Style > Compact cells.

  Then view > sort > time capture. Look closely at the date/time under thumbnails and pay attention to the AM/PM (if you are in a country with 12-hour formats).  The date/time by strictly ascending order?

  If they are not strictly ascending, thanks for posting a screenshot of high resolution of your entire window of LR showing the problem.

• Clipping mask works do not (tried the advice from here and other sites, nothing worked)

  I really didn't want to be * that * fool who asks for help on a topic that has been covered for several times, but I honestly have no idea what I'm doing wrong. I'm doing a clipping mask to a group of numbers in the form of letters. Is a big pile of numbers with overlap I just seem to be in the form of an A and a B. All that happens is everything becomes a white fill.

  I have already tried/is:

  -Selected all

  -Tried grouped and not separated, no difference

  -Vectorization of text creation

  -Numbers flattened/expanded

  -Statements/flattened numbers merged in a vector

  -Created transparent traces (everything turned white again)

  -Copied and pasted into a new file (still turned all white)

  -Clipping for layer mask

  -Ctrl + 7 clipping mask

  -Tried to place the letters in front of and behind the numbers, separately and at the same time

  -Pixelated battery number

  -Make sure my letters have not merged with numbers

  Just for fun, I tried to make another mask for clipping on a string of digits indicated and a hexagon. It worked perfectly fine. I would try to divide everything, but because the numbers are all in a big mess, it would take waaay too long to get the look I want. Can anyone suggest what else I could try?

  I using CS3 if that helps.

  the form A and B must be a composite-no trace group. RADD on transparent traces in the manual.