OLEDs UHD

Similar Questions

• Iris GPU 1536 MB Intel does support UHD?

  Hi all!

  Just a short-term: is Intel Iris 1536 MB GPU supports the UHD?

  It's in my Mac mini, 3 GHz Intel Core i7, 16 GB 1600 MHz DDR3.

  Thank you!

  With UHD say 3840 x 2160? Yes, it will work but only at 30 Hz.

  If you aim at 4096 x 2160, the refresh rate will be limited to 24 Hz.

• Lenovo Y5070 UHD Idle heating

  Hi, I was just wondering if it is normal for a laptop computer to heat up at idle like downloading a large file.

  The lower heat actually upwards, but not to the point that it makes me paranoid because he feels just "hot".

  I have been downloaded a game in steam, is it safe to leave it on overnight?

  BTW, I live in the Philippines so ambient times. are not really good but the laptop remains to his office and also raised

  For more air.

  I leave the Green Mode when I slowed down and download something and close the lid is set to "Do nothing" because I need awake to continue the download. Is my main concern safe to leave it on overnight?

  Display UHD

  GTX 860M 4 GB

  Intel i7 4710HQ

  1 TB HARD DRIVE

  8.1 to win

  Sorry wrong section, could not find remove wire

• The UHD 15 - ISK Y700 display resolution setting

  I find that if I leave the display in full UHD some programs can't handle very tiny (the text in full screen) even when windows adjust the scale of the reconmend 250%. What is eveyone else help the resolution of the screen?

  It seems set to 2048 x 1152 and 125% scaling, it works well

• UHD Lenovo y50 screen blurred when on a 1080 p resolution

  Hello world

  I recently bought a Lenovo Y50 UHD. The UHD resolution is good, but some programs appear too small.

  I change the resolution of 1920 x 1080, but she seems to have a blur on the screen.

  I have a Lenovo Y50 touch with a 1080 p screen and when I compare the two TI is not the same quality.

  Text look a little blurry, etc. Screen spend usually blurred.

  Is there something I can do to fix this?

  Thank you

  N ° if reduce you the resolution, several pixels will be used to represent a single one, which will cause the blur effect, which means that you need to run everything in UHD.

• UHD y50 Lenovo

  I bought the UHD variant, and I'm happy with it, except for the lock at 48 hz. Some games can't. Then I tried to replace, but most (or all?) Replacement FHD screens have 30 pin connectors and UHD has 40. So my question: is it possible to replace the LCD cable as well with a 30 connector pins, so I can go to a panel, FHD, 60 Hz?

  I would say to just get a 60 Hz external monitor and connect it via HDMI (aslong you play on it in the House).
  I would not recommend making the UHD to FHD replacement screens.
  Maybe, try to replace your laptop for a 1 FHD.

  * Note that you can only 1080 p 60 hz with the HDMI, you have right now.

  I'm stuck with the laptop, now that I can't connect it to the monitor 120\144hz since we have only one HDMI output. (shame on you, Lenovo).

• Y50 - 70 - screen display either HD or UHD on laptop Y50-70?

  Dear Sir

  I have laptop Lenovo Y50-70. On the keyboard there are various stickers as always on USB, HD webcam, JBL speakers brand Ultra screen HD, Dolby digital plus. However, on the sticker of the ULTRA HD SCREEN, in very small letters it is written (in option). Can someone tell me what is meant by this "option"? is - this model has screen UHD or just HD. If this is the only HD screen & you opt for screen UHD this sticker must not stick on the Panel. When buying this laptop, I just saw USD screen & did not read (optionally) written on the sticker. If someone can answer?

  Kind regards

  Avinash Karnik

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  You can just click on the desktop and click on display.

  See what resolutions can be selected (monitor Make sure no external is connected).

  If you see the resolution max 1920 * 1080, then your screen is HD (Full HD)

  If you see the higher max resolution above your screen is UHD. I hope this helps.

  Regarding the validation sticker goes, well it's just a sticker and models are available with different resolutions. Purchase the seller should have you said what is your laptop specifications (understand the screen resolution).

• Examples UHD Segmentation Fault

  Hi all

  I'm having some trouble trying to use the UHD examples.

  Some of them I can use. However, some of them give me a Segmentation fault

  ==========================================================

  Rafael@Rafael-Inspiron-7537: / usr/lib/uhd/examples$. / dry tx_bursts - 5 - ampl 0.5 freq - 50e6
  Linux; GNU C++ version 4.8.2; Boost_105400; UHD_003.005.005 - 0-unknown

  UHD WARNING:
  Failed to set the priority of the thread. Performance may be affected negatively.
  Read the general application notes in the manual for instructions.
  EnvironmentError: OSError: error in pthread_setschedparam

  The creation of the usrp device with:...
  -Opening of a USRP2/N-Series device...
  -Current frame size recv: 1472 bytes
  -Current send image size: 1472 bytes

  UHD WARNING:
  Failed to set the priority of the thread. Performance may be affected negatively.
  Read the general application notes in the manual for instructions.
  EnvironmentError: OSError: error in pthread_setschedparam
  Segmentation fault (core dumped)

  ==========================================================

  The same problem to get examples like:
  rx_timed_samples, test_timed_commands, tx_bursts and others

  I use:

  Ubuntu - 14.04

  N210 - USRP

  Hi Rafael,.

  While you can find other UHD users in these forums that can help the best bet is probably to send your question to [email protected] because they are much more experienced in troubleshooting UHD.

  Best regards

  Peter W.

  PES OF RF

• difference between NOR-USRP and UHD

  Hello

  The goal of my project is to develop both the driver code for a custom daughterboard and a control panel of vi Labview to change the properties of Remora.

  I have developed the UHD Linux to include support for the follwing the format of the existing Ettus committees daughter card. This all works very well in conjunction with GNU radio/RCMP.

  Now that I am developing a Labview application to control the Board of Directors, I had to walk away from Linux, because there is no support for the USRP in Lunix LabVIEW.

  I'm just here doing with Windows and am about to install the kit of NOR-USRP for Labview support.

  I'm worried that it's a dead end, however. What is the NOR-USRP? What is a wrapper that allows to serve as an interface with the API UHD Labview? Or is it another pilot for the UHD?

  I was counting on the construction of the UHD in windows to include the patch I made for our daughter and then to develop a top-level control system in Labview. In my reading so far however, it seems that the NOR-USRP is not the UHD, a stand-alone pilot with his own material. If NEITHER-USRP and UHD are mutually exclusive, how do I build the USRP-OR source? (assuming that it is the code of industrial property)

  More generally I could frame my question: how to develop support for the drivers for my daughter card that I can use it with Labview?

  After all, I heard one of the main goals the USRP is sold, is to allow the development of Council of girl. It goes without saying that it should be possible to use development environment NOR?

  Any advice on what I need to install/build to set up a:

  LabVIEW-driver >-> USRP-> card girl custom

  development environment would be greatly appreciated.

  Alex

  Alex-

  Your request seems very interesting and innovative.   The NOR-USRP driver is designed to work on a specific version of UHD and a specific image of FPGA.  In order to provide a user experience that is refined it has been tested with the NI USRP-29erxx materials and was not supposed to be recompiled by the end user or used with custom Remora.

  That said, you can call labraries and communicate with your own internal radio via a UDP socket GNU applications.  Based on the little information I have on the application I would recommend remaining under Linux and the use of LabVIEW for Linux.  You will have the ability to call libraries and use UDP as I've described.  If you choose to switch to windows, you can add a few basic IP capaiblies for functions / toolboxes that run only in Windows operating system.

  Erik

• M9U50AV: Screen HP ENVY15T UHD (3840 x 2160) and hard drive SSD upgrade

  

  1. what kind of display on this laptop have. (dazzle or glare)

  This manual ( http://h10032.www1.hp.com/ctg/Manual/c04691689 ), there is no information to display UHD (3840 X 2160).

  2. the manual says, only i7 processor and 4 GB graphics discrete memory will support STORAGE SATA m2.

  The laptop I ordered has i7 processor but not a 4 GB graphics.  This laptop does support m2 of STORAGE SATA?

  3. If this laptop will not support SATA M.2, what type of SSD should buy?

  SATA, SATA ll, lll, M-SATA SATA, etc.

  Thank you.

  Hi @jihaseo,

  Thank you for your update.

  I am unable to say if the screen you ordered is glare or not.  Please, contact the HP support and have your order number to reference them. They should be able to answer additional questions to the specifications for you.

  Please contact HP to Contact HP Supportassistance.

  Please post the results for the others see.

  Good luck!

• UHD tv as monitor

  I have attached a UHD tv for my Aspire ATC-605-UB11 via HDMI, but television has remained empty. Any ideas, please?

  If you right-click on the desktop and choose screen resolution, you have 2 monitors listed?

• 17R3 with screen UHD

  Ive been watching very seriously get this model (AW17R3-3758SLV) and has two questions about this:

  I really like the UHD screen but for some reason I can't find the UHD screen directly if the Alienware website, only by Best Buy. Is it a kind of exclusivity? Is it possible to get the version UHD directly from Dell?

  In addition, this specific model certainly works with the graphic amplifier? I ask for this reason, since I can't actually find the model on the Alienware website.

  the 4 k on 17 R3 is spectacular. What do you mean that you do not find it on alienware.com? You must change the option from the screen at 4 k ($250 option).

  Yes Alienware graphic amplifier works with all 17R3/R2, 15R2, and 13R2.

• Galaxy S5 UHD 3840 x 2160 sequence settings?

  Sequence of parameters Galaxy S5 UHD?

  Hello

  I would like to match my clip settings, but the automatic sequence (clip of slip in the new sequence) me 10 FPS gives a step 25 frames per second.

  What could be the sequence parameters:

  clips of Samsung Galaxy S5 in H.264 (MPEG-4 Part 10 AVC) bitrate 17Mbps rate 25 fps MP4 3840 x 2160 (8.3 MP 16:9 4 K UHD)

  This could be a good setting: DNxHR?

  Thank you

  First cannot handle variable framerate phone sequences.

  converted with HandBrake constant framerate, and import again.

• Zoom and follow a sequence UHD?

  I'm pretty new to this kind of editing, although I have a pretty good base level of understanding of the PrP a simple editing and workflow.  I have a UHD sequence that is quite long (an hour, material of conference) and there is generally more than necessary field.  Ideally, I tries to take on a crop of 2880 x 1620 that I and follow the speaker, then convert them to 1080.  I don't understand how to follow the speaker (at least I think I do), then I thought to apply the proposal of path to a new publication that is the appropriate size.  However, it seems that you cannot anchor a window of composition for movement track data, so I think that my idea about how to do this is not the typical workflow?

  I tried searching for something similar, but all examples are for something different, so I have not the right words for this process.  Obviously, any help is much appreciated!

  An hour long shot is kind of nuts and monitoring results will be for the most part useless. If your speaker forward and backward on the scene and he turns his body and he moves closer and further away from the camera, and the most stable thing, that you can follow is its size, then you will have problems whenever a hand passes or he turns. You talk also about some non-standard image sizes. Here's what I would do and it won't probably involve AE at all.

  Import you long hour clip in Premiere Pro and take note of the pace. Create a new sequence that is HD standard and match the frame rate. When you drag your images in a Premiere Pro sequence it will ask you to match the settings for the video. Don't, don't. Now open the video effects Panel Viewer, select the handles in Premiere Pro Control Panel program, and then set a keyframe for the position and scale. Move the clip in the right position and resize if she understands what you want to include. Copy both the scale and position of the keyframes. Scrub now down the timeline and when you feel the need to change the view and position scale stick then go down to the place where you want to move the camera and slide the blow to its new position. Do this several times, you don't have to work in real time, and then select all the keyframes in the timeline panel and facilitated easy use. Now you can scrub through your shot of long hours and see how the movements work and make adjustments. That's all there is to it. You're going to do in about 1/10 the time it would take you just get the follow-up in AE and you won't have to find a way to fix all the errors of follow-up. PZ EZ...

• Media encoder do not have preset for ProRes 4 k or UHD, has only for Avid

  I want to transcode my original MXF 4 k (actually UHD) of sony x 70 to ProRes for editing PP in 2015, but even the new update has no ProRes 4 k presets.  There are full frame presets of size for DNxHR MXF OP1a (for Avid) but nothing for 4 k ProRes for editing of PP.  Is there a "Preset"? I don't know, you can leave out the originals in PP but hear the originals H264 wrapper isn't good for editing re applications on system. So I want to transcode to proRes but keep the UHD image size. I have been informed that rates vary according to the size of the image and the pace, Adobe should therefore ProRes settings you can download. Someone knows?

  A number of things.  First of all, the presets are just a shortcut to a group of settings that you can use again and again.  You can always make your own if you don't see one that you need.

  Second, try Cineform.  The quality is just as good as ProRes and publishes it smooth as silk.  In addition, there is already a "Preset" for her.