OM statement has no readers
We have just setup two new servers with san in the following configuration: r.620 Dell x 2 with 2012 hyper configured in a cluster connected to MD3220 via SAS with a single SAS cable on each of the 2 controllers on board.
Dell Openmanage reports failed two readers on 6Gbps SAS HBA controller 0 and 1. While they inspected the MD3220 no disk have failed.
An excerpt from the newspaper
ID 0:7 status critical physical device name 0:7 State could not run Bus Protocol SAS Media HDD review 0784 ability 0.00 used GB RAID disk space 0.00 GB Vendor DELL product MD32xx series No. ID ID. SAS negotiated speed Gbps 6,00 address 590B11C406C46904
Everyone met similar to these errors?
See you soon,.
Dave
I discussed our problem with Dell support last month, Dell support increased the problem internal support to the SME's technical support Department and verified that there is a bug in openmanage version 7.3. Management should not be able to show the disks attached to the SAS HBA, but for some reason any he tried too.
This problem should be solved in the next version, which in March 2014.
As long as MDSM reports as good discs so everything should be ok.
Tags: Dell Products
Similar Questions
-
The page view state has expired due to inactivity.
Hello
I'm trying to settle my portal application, especially in the size of the log.
Is it possible to prevent the error message "ADF_FACES-30108: the page view state has expired due to inactivity." Reload the page"appear in the newspaper?
Thank you
Ricky
Hello.
You can prevent it with a Servlet filter.
http://www.Ateam-Oracle.com/tips-on-dealing-with-the-session-time-out-popup/
Kind regards.
-
VMWorld 2009 for the United States has been announced yet?
VMWorld 2009 for the United States has been announced yet? If so, what is the location? Florida? New York?
VMworld 2009
VMworld 2009 will be held at the Moscone Center in San Francisco, CA September 1-4, 2009. Save the date for this event of the industry.
-
Hello
I'm developing a multiple file download utility. I get an error here. First of all, I want to explain my case.
I use JDeveloper 11.1.1.7.
InputFile property: maximumFiles = '150' uploadType = 'auto '.
change of Web.xml: org.apache.myfaces.trinidad.UPLOAD_MAX_DISK_SPACE = 5368709120 (by 5 GB)
org.apache.myfaces.trinidad.UPLOAD_MAX_MEMORY = 5368709120
org.apache.myfaces.trinidad.CLIENT_STATE_MAX_TOKEN = 3
the session has out = 30 minutes
Here when I am downloading of up to 5 files work fine but when I select more than 15 removal sound always come below error.
Error log AdfcExceptionHandler> ADFc: While handling an exception the application's exception handler threw a new exception. javax.faces.application.ViewExpiredException: viewId:/folderUpload.jspx - ADF_FACES-30107:The view state of the page has expired. Reload the page. at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._restoreView(LifecycleImpl.java:819) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:422) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:207) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:128) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209) at weblogic.work.ExecuteThread.run(ExecuteThread.java:178) ADFc: While attempting to handle this exception the application's exception handler failed. javax.faces.application.ViewExpiredException: viewId:/folderUpload.jspx - ADF_FACES-30107:The view state of the page has expired. Reload the page. at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._restoreView(LifecycleImpl.java:819) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:422) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:207) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:128) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209) at weblogic.work.ExecuteThread.run(ExecuteThread.java:178) ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RESTORE_VIEW 1 javax.faces.application.ViewExpiredException: viewId:/folderUpload.jspx - ADF_FACES-30107:The view state of the page has expired. Reload the page. at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._restoreView(LifecycleImpl.java:819) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:422) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:207) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:128) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209) at weblogic.work.ExecuteThread.run(ExecuteThread.java:178) [Application termination requested. Undeploying application DMSMultipleFileUploadUtility.]
Why is-session time-out error is coming while 15 (small files in KBs) takes 15-20 sec download, what requirements for this error. Take a peek inside Timo Hahn
Thanks and greetings
Maroof Ahmed
Hi all
Finally, I solved my problem for my case and works very well. Thanks Timo Hahn kind help.
The solution obtained below changes.
1. you must use valueChangeListener inputFile for
2. changes in the web.xml file
Changes to the web.xml file javax.faces.STATE_SAVING_METHOD client If this parameter is true, there will be an automatic check of the modification date of your JSPs, and saved state will be discarded when JSP's change. It will also automatically check if your skinning css files have changed without you having to restart the server. This makes development easier, but adds overhead. For this reason this parameter should be set to false when your application is deployed. org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION false Whether the 'Generated by...' comment at the bottom of ADF Faces HTML pages should contain version number information. oracle.adf.view.rich.versionString.HIDDEN true Here Values is in bytes for file upload. This is for 5GB org.apache.myfaces.trinidad.UPLOAD_MAX_DISK_SPACE 5368709120 Here Values is in bytes for file upload. This is for 5GB org.apache.myfaces.trinidad.UPLOAD_MAX_MEMORY 5368709120 Session Time out solution 3600 here org.apache.myfaces.trinidad.CLIENT_STATE_MAX_TOKEN 4000 "all": stores all state in the client in a (potentially large) hidden form field. This matches the default behavior of the JSF reference implementation, and can be useful for developers avoiding any use of HttpSession. org.apache.myfaces.trinidad.CLIENT_STATE_METHOD all The <uploaded-file-max-disk-space> element is used to change the default location uploaded files are stored. This setting directly overrides the web.xml setting org.apache.myfaces.trinidad.UPLOAD_TEMP_DIR. This value can be hardcoded or can be explicitly configured with an EL expression that returns a String object. org.apache.myfaces.trinidad.UPLOAD_TEMP_DIR /tmp/TrinidadUploads/ For details, see configuration of APACHE MYFACES TRINIDAD trinidad
If you are using large files, then you also increase the heap of Java size other wise, you can get on memory bound
Maroof
-
The HP printer and Alerts State has encountered an error and cannot retrieve
I got this message this morning at the start. Rebooted twice and the message came again. I get this message as soon as the desktop appears.
The software has been working well since I bought this HP Laserjet Pro 400 color multifunction. No new software or updates have been made.
The software with this printer has got to be the rotten I have ever seen with a "high-end" printer The software provided with my $99 inkjet is better than this shit.
Edit: Windows 7 is the operating system.
Hello UTexasEx,
To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.
Kind regards
-
Hi guys,.
I'm using the theme of the apex 4.2.6 26.
I have on my page, items that have a disease. The value of my item must be some value of the condition must be completed otherwise, they make on the page. (I mean any type of Condition)
I want to do a process (or something) that will be clear all stored values of elements that constitutes the condition is not satisfied. When? When my page loads.
Is it still possible?
Para wrote:
Hi guys,.
I'm using the theme of the apex 4.2.6 26.
I have on my page, items that have a disease. The value of my item must be some value of the condition must be completed otherwise, they make on the page. (I mean any type of Condition)
I want to do a process (or something) that will be clear all stored values of elements that constitutes the condition is not satisfied. When? When my page loads.
Is it still possible?
Create a process On Load - before header that erases the conditional elements based on the extraction and assess the State of the item's metadata in the APEX_APPLICATION_PAGE_ITEMS view:
begin for unrendered_item in ( select item_name , condition_type , condition_expression1 , condition_expression2 from apex_application_page_items where application_id = :app_id and page_id = :app_page_id and condition_type_code = 'VAL_OF_ITEM_IN_COND_EQ_COND2' and not (apex_util.get_session_state(condition_expression1) = condition_expression2)) loop apex_debug.message( '...clearing session state value "' || apex_util.get_session_state(unrendered_item.item_name) || '" for item ' || unrendered_item.item_name || ' as condition of type "' || unrendered_item.condition_type || '" with Expression 1 = "' || unrendered_item.condition_expression1 || '" and Expression 2 = "' || unrendered_item.condition_expression2 || '" failed.'); apex_util.set_session_state(unrendered_item.item_name, null); end loop; end;
-
Why a sql statement has become slow after upgrade to 11g database
Hello
My previous version of the database is 9I and any sql statement are well-developed.
but after upgrading to 11g database, a sql statement become slowly.
My senior dba friend told me there are a few different calculating methods from 9i to 11g.
is any body can explain this different methods from 9i to 11g, and what should be attention to calculate at what level 9i to 11g. I thank.
SeanThe administrator of yours is correct. What he meant, 9i, the works of the optimizer with different formulas and 11 g, there are different formulas. PS this sometimes causes when you upgrade from 9i (or even 10g too), analyze the queries that worked with RBO in 9i perfectly and used indexes, all of a sudden they stop using it because the CBO think not that this is a good choice. It would be too difficult to put formulas here by anyone, but what I can say is that to buy a book.
http://www.Amazon.com/cost-based-Oracle-fundamentals-experts-voice/DP/1590596366And practice on 9i, 10g and 11g. It would say a lot of formulas used by oracle.
HTH
Aman... -
Use the state machine to fill cluster
Hello
I am trying to create a state machine that is running two States, each State has two items up to a Bundle function and in the cluster. I want the two elements of the State first across, then the second State should run and pass the last two items. Currently, I get only the data of the final State. I have one the vi attached.
Thank you
Chris
You don't actually have a state machine. What you have is a simple loop, and nothing of what is happening in the previous iterations of the loop is spent in later iterations.
You must create the cluster in the loop itself and maintatin into a shift register. Use the bundle by name to update the respective elements of the cluster in each picture of the structure of the case.
-
A 'hacker' has a connection to remote vnc on my computer.
Someone has established a connection vnc on my computer and play with my threatening to delete files from my heart and my computer in brick, is also going through my files and photos.he me slips to search through my webcam and other things. I've already blocked ports 5800-5905 because I think he uses a R.A.T. But that has not stopped him. I downloaded Malwarebyte s, ccleaner and avast so apparently clean up my systems but it should always connect. At the moment I have Manager tsk open on the users tab, hoping to see his if it connects and open cmd with net stat - Bn and net stat - has but I still don't know if I can see if it connects to me. I really need help!
I've moved your post to the safe area on the forum.
Disconnect your PC from the network.
If someone has connected to your PC via vnc, there is something on your computer allowing in this regard. A connection needs a host 'server' to connect to, so the PC is not "clean".
-steve
-
Try to switch between the States of an object when a user clicks on this object? I have successfully used the function of the State of the object to change the object to a different State, but I need it back to its Normal state when it is selected again in the State has changed and then continue to turn every State when you click on it. It is an interaction of flashcard. I can do this using several objects and hide/show, but I would do it with States and unique objects.
You're talking about custom or InBuilt States. What kind of action do you use: a simple or advanced/shared action? If you simply switch between two States, use the approach I described in this blog post:
1 share = 5 buttons toggle - Captivate blog
You will probably need a user variable to track the status, but you can use the shared conditional action described in this blog.
-
Visibility is known between slides, but the State isn't?
I'm trying to build a module of courses around a main page with links to the section slides, which can be clicked in any order. An example of main page might look like this:
Ideally, I would like to by clicking on a button to perform the following operations:
- Set the State of the value button "clicked", which clears the background color, so it is visually clear what topics have been considered
- Display a summary of the section to the right of the button (currently in a hidden caption area)
- Skip a slide on the subject, which then returned to the hand glide, where we see the changes described above
As a first step, I created a joint action for this...
The strange thing is that, when I click on the first button to go to the slide, and then return to the menu, changing the visibility of the description remained, but the State has reset to the default value.
Only, I was able to get the effect I wanted by exercising an action of the button, the value of a variable, then running a conditional action when the main slide load this state of button changes if the variable is set.
Button action
Drag action
In doing so, for the two buttons, achieve the effect desired for them (don't mind not update the premiera for this example):
So, now, I have something that works, but I'm a bit confused: I would understand if the changes of State or by changing the visibility stuck, or if both stuck, but this inconsistency makes me think to I can miss something.
Bottom line: is there a better way to do what I want?
You need to do with the event on Slide enter, indeed. This means that you must use variables. If you want to use a similar action in other projects, turn the conditional action in common action. When moving that shared action at the library of another project, the variables will be automatically created e.
However: I would add the text to the "Clicked" State, which means that you don't have to use a separate command to display the text. You seem to ignore that? This is one of the screenshots of my last blog, I used a custom state (Invisible), in which an image and a text bubble was added.
Based on my experience with conditional actions, especially avoid the operator "does not correspond to", you might use "equals 1' as well, more confidence.
-
Combine multiple statements into a single merge?
Hi all
I'm stuck with a situation here that I've ever met. I will try to describe below. I'm running it in Oracle 10 g.
TABLE_A is empty before the start of the process. TABLE_B has a few million lines. Rest a few thousand.
INSERT the TABLE_A
SELECT * FROM TABLE_B;
MERGE the TABLE_A
With the HELP of TABLE_C
ON TABLE_A.PID = TABLE_C.PID
WHEN MATCHED
UPDATE
WHEN NOT MATCHED
INSERT;
MERGE the TABLE_A
With the HELP of TABLE_D
ON TABLE_A.PID = TABLE_D.PID
WHEN MATCHED
UPDATE
WHEN NOT MATCHED
INSERT;
MERGE the TABLE_A
With the HELP of TABLE_E
ON TABLE_A.PID = TABLE_E.PID
WHEN MATCHED
UPDATE
WHEN NOT MATCHED
INSERT;
due to the huge amount of data, the merge statement has faced every time that it runs, it consumes a lot of time (hours) to run. Is it possible to rewrite above fusion sql in a sql statement using outer joins? I tried a few approaches, but none seems to be practical. Please shed some light on the question, if you find a way more right to do the same thing.
Thank you
Without any code and actual tables, all I can do is to guess:
Fusion in table_a a
using (select... table_c
Union of all the
Choose option... table_d
Union of all the
Choose option... table_e
) u
on (u.pid = a.pid)
When matched...
When not matched...
But I don't know if there are keys duplicated on other tables. If there is, you will get the unstable set of lines error.
-
When the FAILURE of the Worker.State occurs in a task?
How detect that a Worker.State has no PU occurs in a task? or say when the FAILURE of the Worker.State occurs in a task? It's when an exception occurs in the task call() method?
Consider the code below:
import java.io.BufferedReader; import java.io.InputStream; import java.io.InputStreamReader; import java.net.URI; import java.net.URISyntaxException; import java.net.URL; import java.net.URLConnection; import javafx.concurrent.Task; /** * Background task to fetch the all classes documentation page from a URL */ public class FetchDocListTask extends Task<String> { private final String docsDirUrl; public FetchDocListTask(String docsDirUrl) { this.docsDirUrl = docsDirUrl; } @Override protected String call() throws Exception { System.out.println("---- FetchDocListTask docsUrl = " + docsDirUrl); StringBuilder builder = new StringBuilder(); try { URI uri = new URI(docsDirUrl + "allclasses-frame.html"); URL url = uri.toURL(); URLConnection urlConnection = url.openConnection(); urlConnection.setConnectTimeout(5000); // set timeout to 5 secs InputStream in = urlConnection.getInputStream(); BufferedReader reader = new BufferedReader( new InputStreamReader(in)); String line; while ((line = reader.readLine()) != null) { builder.append(line); builder.append('\n'); } reader.close(); } catch (URISyntaxException e) { e.printStackTrace(); } return builder.toString(); } }
When the State.FAILED occurs? In fact, I want to write a code to detect everything simply if the computer is connected to the internet. Hope to help ~
Yes. If the call() method stops due to an unhandled exception, the condition of the property becomes IMPOSSIBLE. If a return statement is executed successfully, the ownership of the State passes to SUCCEEDED. There are no other possibilities.
You can test it with something like:
import javafx.application.Application; import javafx.concurrent.Task; import javafx.concurrent.WorkerStateEvent; import javafx.event.EventHandler; import javafx.scene.Scene; import javafx.scene.control.TextArea; import javafx.scene.layout.BorderPane; import javafx.stage.Stage; public class TaskStateTest extends Application { public static void main(String[] args) { launch(args); } @Override public void start(final Stage primaryStage) { Task
exceptionHandlingTask = new Task () { @Override protected Void call() throws Exception { try { throw new Exception("Boom"); } catch (Exception exc) { System.out.println(exc.getMessage() + " handled"); } return null; } }; Task exceptionThrowingTask = new Task () { @Override protected Void call() throws Exception { throw new Exception("Boom"); // return null; } }; final BorderPane root = new BorderPane(); final TextArea textArea = new TextArea(); root.setCenter(textArea); primaryStage.setScene(new Scene(root, 600, 400)); primaryStage.show(); registerHandlers(exceptionHandlingTask, "exceptionHandlingTask", textArea); registerHandlers(exceptionThrowingTask, "exceptionThrowingTask", textArea); Thread t1 = new Thread(exceptionHandlingTask); Thread t2 = new Thread(exceptionThrowingTask); t1.start(); t2.start(); } private void registerHandlers(final Task task, final String msg, final TextArea textArea) { task.setOnFailed(new EventHandler () { @Override public void handle(WorkerStateEvent event) { textArea.appendText(msg + " failed\n"); } }); task.setOnSucceeded(new EventHandler () { @Override public void handle(WorkerStateEvent event) { textArea.appendText(msg + " succeeded\n"); } }); } } -
Use page LOV which has been defined by a dynamic action
Greetings,
I have a situation where I need to refer to an item hidden in a SQL statement from the list of values (for a drop-down list). It doesn't seem to work properly. Here's what I have:
(1) using a dynamic action, the value of a hidden element, based on the change of select list 1.
(2) select list 2 has a parent element LOV to select list 1 and the Select statement to select list 2 uses the hidden element that has been defined in the dynamic action above.
I see that the dynamic action works properly. But when I change to select list 1, list 2 Select shows not all values in the LOV.
I hope this makes sense. I wonder if the LOV to select list 2 does not work because the element used in the SQL statement has been defined by a dynamic action?
Thanks in advance!
JohnSince you use a sql query to retrieve a single value, is it necessary to have this value in a field hidden somewhere?
Could you not change the query for you select second list to limit its results by integrating this query in lov query, for example through an is clause? -
Analytics DPS - can you get distinct view stats for html online views vs ipad views?
Hi all
New at DPS and statistical reports of the use of a customer and I wanted to know if you can separate the stats views of readers who saw the publictaion on an iPad vs thos who have read via HTML (on a computer laptop/desptop etc.).
Thank you
Not with Analytics Basic by default, Yes, if you have an Omniture Site Catalyst account that is reporting progress. Information about Site Catalyst reporting http://download.macromedia.com/pub/developer/dps/analytics-report/dps-analytics-report-gui.pdf
Maybe you are looking for
-
Since the update to Firefox 4 my Windows toolbar crashes after a few minutes. Firefox also uses a huge amount of memory. More than any other program and I have a lot of powerful programs. This time 222 000. More than any other program. Critical probl
-
backup to external hard drive with the Mavericks El Capitan
How to back up the El Capitan on the same external hard drive with the Mavericks?
-
entry with DAQmx and simple analog output
Hi guys,. I did a vi that is supposed to a tension (and current), read and write a tension (and current). Write processes both read the process works perfectly when activate them separately. But I can't activate reading while I am writing the process
-
My old computer was an IBM. & 9 years old. I began to have problems with it & taken to 'Computer Man'who has the clean up years before. He said he wouldn't take about half an hour to fix. Ten days later I picked it up as he said he was ready. All
-
BlackBerry Smartphones USSD code does not work on my BB 9650
Hi all! All codes USSD (* # 566, * 123 # etc) does not work on my BB 9650. How to solve this problem? I use the grameenphone GSM network in Bangladesh. Anyone facing this problem? Please answer this... BB admins