When the FAILURE of the Worker.State occurs in a task?

Similar Questions

• Dell Precision M6500: Reference DELL M6 500 computer laptop does not charge when the work and no start-up when which

  Laptop DELL M6 500, do not load when the work and no start-up when which

  just bettry lights blink when phone on Exchange when I plug laptop tap, on bettry

• LASERJET 2420: hp2420 LASERJET ATTN LED FLASHES WHEN THE WORK of PRINTING SENT. ATTN PRESS MUST BE ON EVERY PRINT JOB TO PRINT

  hp2420 LASERJET ATTN FLASHING WHEN PRINT JOB SENT. ATTN PRESS MUST BE ON EVERY PRINT JOB TO PRINT

  You have a control panel on the printer which should have a post about that.  Most of the time this occurs when the size and or the type of paper, the work of the application is not the same as the printer settings and pressing the button you tell the printer to use paper so that it is set.  Most of the time the best solution is to define the type of paper and size and everything and all at once for tray 2 which should solve the problem.

• Identify when the last update occurred

  I have two tables I need to unite. A table has dates that occur for events.

  with date_table as (
  select 1 ID_Key,to_date('4/1/2013','mm-dd-yyyy') date_val from dual union all
  select 1 ,to_date('4/2/2013','mm-dd-yyyy') from dual union all
  select 1 ,to_date('4/3/2013','mm-dd-yyyy') from dual union all
  select 1 ,to_date('4/4/2013','mm-dd-yyyy') from dual union all
  select 1 ,to_date('4/5/2013','mm-dd-yyyy') from dual union all
  select 1 ,to_date('4/6/2013','mm-dd-yyyy') from dual union all
  select 1 ,to_date('4/7/2013','mm-dd-yyyy') from dual union all
  select 2 ,to_date('4/1/2013','mm-dd-yyyy') from dual union all
  select 2 ,to_date('4/2/2013','mm-dd-yyyy') from dual union all
  select 2 ,to_date('4/3/2013','mm-dd-yyyy') from dual union all
  select 2 ,to_date('4/4/2013','mm-dd-yyyy') from dual union all
  select 2 ,to_date('4/5/2013','mm-dd-yyyy') from dual union all
  select 2 ,to_date('4/6/2013','mm-dd-yyyy') from dual union all
  select 2 ,to_date('4/7/2013','mm-dd-yyyy')  from dual 
  )
  

  The other table there when was the last time the ID_Key has been updated

  with Update_table as (
  select 1 ID_key,to_date('3/12/2013','mm-dd-yyyy') Last_Update from dual union all
  select 1 ,to_date('4/5/2013','mm-dd-yyyy') from dual union all
  select 2 ,to_date('3/1/2013','mm-dd-yyyy') from dual union all
  select 2 ,to_date('4/2/2013','mm-dd-yyyy') from dual union all
  select 2 ,to_date('4/4/2013','mm-dd-yyyy') from dual union all
  select 2 ,to_date('4/6/2013','mm-dd-yyyy') from dual
  )
  

  I would get the following table

  with end_table as (
  select 1 ID_Key,to_date('4/1/2013','mm-dd-yyyy') date_val, to_date('3/12/2013','mm-dd-yyyy') last_Update from dual union all
  select 1 ,to_date('4/2/2013','mm-dd-yyyy'), to_date('3/12/2013','mm-dd-yyyy') from dual union all
  select 1 ,to_date('4/3/2013','mm-dd-yyyy'), to_date('3/12/2013','mm-dd-yyyy') from dual union all
  select 1 ,to_date('4/4/2013','mm-dd-yyyy'), to_date('3/12/2013','mm-dd-yyyy') from dual union all
  select 1 ,to_date('4/5/2013','mm-dd-yyyy'), to_date('4/5/2013','mm-dd-yyyy') from dual union all
  select 1 ,to_date('4/6/2013','mm-dd-yyyy'), to_date('4/5/2013','mm-dd-yyyy') from dual union all
  select 1 ,to_date('4/7/2013','mm-dd-yyyy'), to_date('4/5/2013','mm-dd-yyyy') from dual union all
  select 2 ,to_date('4/1/2013','mm-dd-yyyy'), to_date('3/1/2013','mm-dd-yyyy') from dual union all
  select 2 ,to_date('4/2/2013','mm-dd-yyyy'), to_date('4/2/2013','mm-dd-yyyy') from dual union all
  select 2 ,to_date('4/3/2013','mm-dd-yyyy'), to_date('4/2/2013','mm-dd-yyyy') from dual union all
  select 2 ,to_date('4/4/2013','mm-dd-yyyy'), to_date('4/4/2013','mm-dd-yyyy') from dual union all
  select 2 ,to_date('4/5/2013','mm-dd-yyyy'), to_date('4/4/2013','mm-dd-yyyy') from dual union all
  select 2 ,to_date('4/6/2013','mm-dd-yyyy'), to_date('4/6/2013','mm-dd-yyyy') from dual union all
  select 2 ,to_date('4/7/2013','mm-dd-yyyy'), to_date('4/6/2013','mm-dd-yyyy') from dual 
  )
  

  Any suggestions?

  Just join, help<=, then="" group="" by,="" and="" grab="" the="">

  with date_table like)

  Select 1 ID_Key, to_date (' 1/4/2013 ','mm-dd-yyyy') date_val of all the double union

  Select 1, to_date (' 4/2/2013 ','mm-dd-yyyy') of all the double union

  Select 1, to_date (' 4/3/2013 ','mm-dd-yyyy') of all the double union

  Select 1, to_date (' 4/4/2013 ','mm-dd-yyyy') of all the double union

  Select 1, to_date (' 4/5/2013 ','mm-dd-yyyy') of all the double union

  Select 1, to_date (' 4/6/2013 ','mm-dd-yyyy') of all the double union

  Select 1, to_date (' 4/7/2013 ','mm-dd-yyyy') of all the double union

  Select 2, to_date (' 1/4/2013 ','mm-dd-yyyy') of all the double union

  Select 2, to_date (' 4/2/2013 ','mm-dd-yyyy') of all the double union

  Select 2, to_date (' 4/3/2013 ','mm-dd-yyyy') of all the double union

  Select 2, to_date (' 4/4/2013 ','mm-dd-yyyy') of all the double union

  Select 2, to_date (' 4/5/2013 ','mm-dd-yyyy') of all the double union

  Select 2, to_date (' 4/6/2013 ','mm-dd-yyyy') of all the double union

  Select 2, to_date (' 4/7/2013 ','mm-dd-yyyy') of double

  ), Update_table as)

  Select 1 ID_key, to_date('3/12/2013','mm-dd-yyyy') Last_Update in double union

  Select 1, to_date (' 4/5/2013 ','mm-dd-yyyy') of all the double union

  Select 2, to_date (' 3/1/2013 ','mm-dd-yyyy') of all the double union

  Select 2, to_date (' 4/2/2013 ','mm-dd-yyyy') of all the double union

  Select 2, to_date (' 4/4/2013 ','mm-dd-yyyy') of all the double union

  Select 2, to_date (' 4/6/2013 ','mm-dd-yyyy') of double

  )

  Select dt.id_key, dt.date_val,.

  Max (UT.last_update) last_update

  of date_table dt.

  update_table ut

  where dt.id_key = ut.id_key

  and ut.last_update<=>

  Dt.id_key group, dt.date_val

  order of dt.id_key, dt.date_val

  /

  ID_KEY DATE_VAL LAST_UPDATE

  ---------- ----------- -----------

  1-01 - apr - 2013 12-mar-2013

  1-02 - apr - 2013 12-mar-2013

  1 03-Apr-2013 12 - mar - 2013

  1-04 - apr - 2013 12-mar-2013

  1-05 - apr - 2013 05 - apr - 2013

  1-06 - apr - 2013 05 - apr - 2013

  1-07-Apr-2013 05-apr-2013

  2-01 - apr - 2013 01-mar-2013

  2-02 - apr - 2013 02 - apr - 2013

  2 03-Apr-2013 02-apr-2013

  2-04 - apr - 2013 04 - apr - 2013

  2-05 - apr - 2013 04 - apr - 2013

  2-06 - apr - 2013 06 - apr - 2013

  2 07-Apr-2013 06-apr-2013

  14 selected lines.

• How to be notified when the work plan changed

  Anyone know how to connect to a notice of changed work plan?

  I searched all over the contents of the documentation and found nothing.

  Thank you

  You are looking for kAIDocumentCropAreaModifiedNotifier

• Some VMDK of getting scratched twice when the policy States 1 stripe. Disc format 6.0 VSAN 2.

  So I noticed this strange problem on my virtual SAN. 99% of my VMDK are properly implemented with 1 witness and a raid 1 array with 1 disk of two hosts. Like in this picture.

  

  Now, here is an another VM, with the same storage policy, creating a raid 0 of mirrors and to use more space than I care to provide to the virtual machine.

  

  I tried to reapply policies and nothing changes. It's not a huge deal, but I'm just curious to know what would cause this. Oh yes and the kicker is still its in line with the policy says VSAN.

  

  It's perfectly normal in a number of situations and is not a bug. For example, let's do all this time, a VMDK is larger than 255 GB. We are also when there is not enough disk space. See the series of Cormac Virtual SAN (VSAN) - CormacHogan.com blog and specifically part 23: http://cormachogan.com/2014/04/23/vsan-part-23-why-is-my-storage-object-striped/

  I also want to clarify that, contrary to what you said that a RAID-0 doesn't consume additional disk space. It is simply a way to split a mirror into smaller pieces. In short, the size changes however.

  Regarding compliance, if you find the definition, StripeWidth is a _minimum_ of batteries by mirror number to use. VSAN is free to use several axes. Note also in previous cases where we use RAID-0, we can place two strips on the same disc, as long that satisfy the minimum of StripeWidth pins of the requested user.

  Christian

• No internet connection when the Working Group has changed.

  I changed the workgroup from my XP machine the same as my Windows 7 computer so that I could have access to a printer, restarted, and now I can't access the internet.

  I changed it back and still no access.

  I use McAfee firewall and have checked all the settings, turned off the firewall and no change. (It is back on again)

  I have connected to another network wifi locally and not always no connection.

  I can ping my router and Windows 7 computer.

  What happened and how can I get it back?

  A big thanks to all respondents, he sweat finally it was McAfee which was causing the problem, it just took McAfee four days to notice there is another pc on the network and him to be confident!

• Remove the snapshot from the server and then send a mail to me when the work is finished.

  Hi all

  Could someone help me with a script that would do this?

  Concerning

  Tyler

  This goes in the direction of what you are looking for?

  $snaps = Get-VM | Get-Snapshot
  Remove-Snapshot -Snapshot $snaps -Confirm:$false
  
  $emailFrom = "[email protected]" $emailTo = "[email protected]" $subject = "All snapshots are removed" $body = $snaps | select VM,Name,Created,SizeMB | ft -AutoSize | Out-String $smtpServer = "smtpserver"
  $smtp = new-object Net.Mail.SmtpClient($smtpServer)
  $smtp.Send($emailFrom, $emailTo, $subject, $body)
  

• Force the worker compilation to work faster

  The process of creating the FPGA bit files takes a long time even with a simple FPGA design.  I followed the system resources, when the worker compile creates the file bit. Only a few percentage of the CPU is being used. Is there a way to force works Woker compile faster because there are available system resources?

  My system is dual Xeon 6 physical cores with 16 GB of RAM, running the version of LabVIEW 2011 90 days come with the single-board Rio evaluation.

  

  FPGA code compilation is performed not by the compiler to the LabVIEW but a compiler of Xilinx, specific to their FPGA chips.

  The problem you see is the compiler of Xilinx is a single thread and so will not use the base and can also sometimes be seen ' hanging out '. There is nothing you can do to push the compiler to redouble our efforts by encouraging the use of other resources. If you carrots be 3.2 GHz each, then compile on your dual Xeon 6 will be no faster than on a single 3.2 GHz processor.

  What you need to reduce your compile time is the fastest core, you can get!

• Hard analysis of the same statement

  Simple example:

  SQL > select * from table_1 where col_1 =: b;  -can also use literal here

  Use "INDEX RANGE SCAN.

  SQL > alter session set OPTIMIZER_INDEX_COST_ADJ = 1000;

  Will cause the same instruction to use "TABLE ACCESS FULL".

  
  Why the database generates new plan? When the same statement is still hard analyzed, assuming there is enough space in the shared pool and the statement is not 'Compatible with Bind?

  Thank you.

  The view V$ SQL_SHARED_CURSOR shows some of the causes as to why the optimizer will choose not not to share an existing child cursor.

  Change OPTIMIZER_INDEX_COST_ADJ falls under the cover of OPTIMIZER_MISMATCH.

  The question that arises is almost reversed from what you ask.

  It is not so when the optimizer chooses to make a difficult analysis.

  It's more when a cursor existing being/not reusable.

  that is, you will get an analysis hard whenever there is no such thing as an existing child shareable cursor.

  So, if you run the SQL statement in a session and lend an existing child cursor reuse does not exist, then you will get a difficult analysis.

• Question related to the INSERT statement

  Imagine this scenario:
  
  -table_a has 5 000 000 records at time t1
  
  -table_b is empty at time t1
  
  -At time t1, I execute the following statement:

            insert into table_b
              select * from table_a;
      

  -L' insert statement ends in time t2
  
  -Between t1 and t2, say 3 000 new records have been added to the table_a (by OLTP processes).
  Thus, at time t2, table_a has 5 003 000 records.
  
  My question is, at time t2, the number of records will be in table_b? Will it 5,000,000 or
  5 003 000 or somewhere between these two counts?
  
  I guess it will be 5,000,000 because that is the number when the insert statement
  has started to run.
  
  Any comment is appreciated.

  Syed Ullah says:
  Imagine this scenario:

  -table_a has 5 000 000 records at time t1

  -table_b is empty at time t1

  -At time t1, I execute the following statement:

  insert into table_b
  select * from table_a;
  

  -L' insert statement ends in time t2

  -Between t1 and t2, say 3 000 new records have been added to the table_a (by OLTP processes).
  Thus, at time t2, table_a has 5 003 000 records.

  My question is, at time t2, the number of records will be in table_b? Will it 5,000,000 or
  5 003 000 or somewhere between these two counts?

  I guess it will be 5,000,000 because that is the number when the insert statement
  has started to run.

  Any comment is appreciated.

  At time t2, it is possible that the answer is 0. Once the insert operation finishes (can be any time after t1 in your example, possibly before t2, possibly after) and assuming you checked in the same session where you run the insert, you would see 5 000 000. In other sessions you would continue to see 0 up to what the session who made the done insert one COMMIT.

  http://docs.Oracle.com/CD/E11882_01/server.112/e25789/consist.htm#CNCPT121

  Is something that you should read. He described these concepts much better than what you'll probably find in a few posts on the forum.

• My family will travel to the United States to the Mexico.  I have to update my position when I reached my destination, so my map app will work here?

  My family will travel to the United States to the Mexico.  Do I need to change anything on my phone about my temporary location when I reached my destination so my map app will work properly in MX or the GPS automatically adjusts?  I ask because I don't want to go & have my battery to grind to stop as he tries to understand my new location.  I have an IPhone5, iOS 9.2.  How to make the change if the change is necessary?

  Your phone gets your location by connecting to the GPS satellites. Using location services works with battery. However, it will not use more independently connect to the Mexico it makes when it finds your place here.

  When you do need to make sure to do is to contact your cellular carrier and make sure that your account is enabled for international roaming and you understand what can be the cost.

• Star Wars: Republic Commando. Worked on Vista, the problem is that when the game tries to load the first mission, he leaves the game

  Star Wars: Republic Commando. Worked on Vista, the problem is that when the game tries to load the first mission (the only one available for a new player) outputs of the game and gives the following. I hope this info is useful to anyone who is willing to take the time to help me. Thank you-Zachert45

  Details:

  Problem event name: APPCRASH

  Application name: SWRepublicCommando.exe

  Application version: 0.0.0.0

  Application timestamp: 41f707e4

  Fault Module name: StackHash_1a02

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception code: c0000005

  Exception Offset: 6 c 707544

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  Information additional 1: 1a 02

  More information 2: 1a022ea3469ead417de7f3ac704042e3

  3 more information: aa4f

  Additional information 4: aa4f8516a5b4c2bae31f69214dbeb837

  In addition, the game made a newspaper that it lasted, if an error occurred. NOTE: Windows verson shown here was one of the many tests bring made, all ended the same way.

  Uninitialized: open the log file, 08/09/12 19:20:48
  Uninitialized: name subsystem initialized
  Init: Detected: Windows NT 6.0 (Build: 6000)
  Init: Build: 139
  Init: Version of the engine: 2226
  Init: Update: January 25, 2005
  Init: command line:
  Init: Base Directory: C:\Program Files (x 86) \LucasArts\Star Wars Republic Commando\GameData\System\
  Init: Character set: ANSI
  Journal: Related to Window.dll
  Journal: Related to Core.dll
  Journal: Related to frengine.dll
  Init: Subsystem of the initialized object
  Init: Computer: ZACHERT45HP
  Init: User: Zachert45
  Init: Of CPU Page size = 4096, processors = 4
  Init: CPU detected: type processor PentiumPro (GenuineIntel)
  Init: CPU features: FPU CMov EAP RDTSC MMX, SSE
  Init: CPU @ 2694 MHz
  Init: Total memory: Phys = 1048575 K Pagef = 2097151 K Virt = 2097024K
  Init: Working together: 32000 / 159000
  Init: Physical memory: 1023 MB
  Init: D3D Device: video memory onboard: 1008
  Caution: Charge Dynamics Engine.GameEngine
  Journal: Bound to CTGame.dll
  Journal: Bound to Gameplay.dll
  Journal: Related to IpDrv.dll
  Journal: Related to XInterface.dll
  Journal: Related to XGame.dll
  Init: Unreal engine initialized
  Journal: Related to WinDrv.dll
  Init: Client initialized
  Journal: Related to D3DDrv.dll
  Init: Direct3D detected adapters:
  Journal: aticfx32.dll/Radeon HD 6470 M
  Init: D3D Driver: MaxTextureBlendStages = 8
  Init: D3D Driver: MaxSimultaneousTextures = 8
  Init: D3D Driver: MaxActiveLights = 8
  Init: D3D Driver: MaxPrimitiveCount = 5592405
  Init: D3D Driver: MaxVertexIndex = 16777215
  Init: D3D Driver: MaxStreams = 16
  Init: D3D Driver: MaxStreamStride = 508
  Init: D3D Driver: MaxVertexShaderConst = 256
  Init: D3D Driver: VertexShaderVersion = 1.1
  Init: D3D Driver: PixelShaderVersion = 1.4
  Init: D3D Driver: support AGP detected
  Init: D3D Driver: using w-pixel fog
  Init: D3D Driver: trilineaires media
  Init: D3D Driver: supports BLENDDIFFUSEALPHA
  Init: D3D Driver: Supports LOD bias
  Init: D3D Driver: Supports Z polarization
  Init: D3D Driver: supports D3DTOP_ADDSIGNED2X
  Init: D3D Driver: supports D3DTOP_BUMPENVMAP
  Init: D3D Driver: supports D3DTOP_BUMPENVMAPLUMINANCE
  Init: D3D Driver: supports D3DTOP_DOTPRODUCT3
  Init: D3D Driver: supports D3DTOP_MODULATEALPHA_ADDCOLOR
  Init: D3D Driver: supports D3DTOP_MODULATECOLOR_ADDALPHA
  Init: Unreal Engine Direct3D support - internal version: SB3
  Init: D3D Device: szDriver = aticfx32.dll
  Init: D3D Device: szDescription = Radeon HD 6470 M
  Init: D3D Device: wProduct = 8
  Init: D3D Device: wVersion = 17
  Init: D3D Device: wSubVersion = 10
  Init: D3D Device: wBuild = 1065
  Init: D3D Device: dwVendorId = 4098
  Init: D3D Device: dwDeviceId = 26464
  Init: D3D Device: dwSubSysId = 370806844
  Init: D3D Device: dwRevision = 0
  Init: D3D detected: ATI video card
  Init: D3D Device: using cubemap [with mipmaps]
  Caution: Charge Dynamics BumpTex.StaticEnvmaps.StaticDiffuse
  Caution: Charge Dynamics BumpTex.StaticEnvmaps.StaticSpecularMatte
  Caution: Charge Dynamics BumpTex.StaticEnvmaps.StaticSpecularDull
  Caution: Charge Dynamics BumpTex.StaticEnvmaps.StaticSpecularPolished
  Caution: Charge Dynamics BumpTex.StaticEnvmaps.StaticSpecularShiny
  Journal: (Karma): Karma from beginning of game.
  Journal: (Karma): creation of MeAssetDB.
  Journal: (Karma): loading: ambient.ka
  Journal: (Karma): loading: clone.ka
  Journal: (Karma): loading: droid.ka
  Journal: (Karma): loading: geonosian.ka
  Journal: (Karma): loading: rasanimprops.ka
  Journal: (Karma): loading: trandoshan.ka
  Journal: (Karma): loading: turrets.ka
  Journal: (Karma): loading: vehicles.ka
  Journal: (Karma): loading: wookiee.ka
  Journal: (Karma): finished creating MeAssetDB (27 properties).
  Log: Watermark memory pre load: 0
  Journal: Preload for entry Stats: 58 opened, looking for 269, dumpsters 954, bed 46950 KB / 4329, serialize 44419 KB / 1615039
  Journal: LoadMap: entry 08/09/12 19:20:49
  Log: Watermark memory pre load: 1
  Caution: Charge Dynamics Entry.myLevel
  Journal: Loading times for the entry: 0.000 sec total, 0.000 app
  Connection: Time entry init actor coll: 0.000 sec total, 0.000 app
  Journal: Play class is "GameInfo."
  Newspaper: The level is level Entry.myLevel
  Newspaper: * WARNING - paths is maybe NOT INVALID *.
  Journal: What is the Entry.myLevel level to play (0) 08/09/12 19:20:49...
  ScriptLog: InitGame:
  ScriptLog: Mutator database is Entry.InGameTempName
  ScriptLog: GameInfo::InitGame: bEnableStatLogging False
  ScriptLog: MusicStat is InGameTempName
  Connection: Time entry init BeginPlay: 0.000 sec total, 0.000 app 08/09/12 19:20:49
  Log: Watermark memory Post charge: 2
  Connection: Time entry init: 0.000 sec total, 0.000 app
  Journal: Entry file load stats: opens 2, looking for 4, 9 trucks, 31KO bed / 16, serialize 7KO / 2092
  Connection: Exit LoadMap 08/09/12 19:20:49
  Caution: Charge Dynamics UDebugMenu.UDebugRootWindow
  Caution: Charge Dynamics UDebugMenu.UDebugBlueLookAndFeel
  Journal: Related to ALAudio.dll
  Init: AL_VENDOR: Creative Labs Inc.
  Init: AL_RENDERER: software
  Init: AL_VERSION: OpenAL 1.0
  Init: AL_EXTENSIONS: EAX 2.0, EAX, EAX, EAX 4.0 3.0 unified and EAX - AC3
  Journal: 16 Sources AL Audio created!
  Init: ALAudio: initialized subsystem.
  ScriptLog: 255 team
  Journal: (Karma): KInitSkeletonKarma: framework, but not of the world.
  Init: System initialized to input InGameTempName
  Journal: Open window
  Journal: Couldn't put the window in the foreground.
  Journal: Enter SetRes: 1024 x 768 full screen 0
  Journal: Using back buffer 22 (32-bit) format
  Journal: Using format 77 (32-bit) depth buffer
  Journal: Creation of device
  Init: D3D Driver: CreateDevice: will use the hardware transformation and lighting.
  Init: D3D Driver: CreateDevice: will use hardware vertex processing
  Journal: Create context of the EMI.
  Init: Init game engine time: seconds 1,366000 total 1.014007 app
  Journal: Game init load stats: opens 2, looking for 11, 61 Skips, bed 445 KB / 141, serialize 268 KB / 190555
  ScriptLog: MenuOpen: XInterfaceCTMenus.CTStartPCMenu (RESET)
  Caution: Charge Dynamics GUIContent.Menu.RC_title_bg
  Journal: StartMovie with m_PlaybackRect (0, 0), (1024, 768)
  Connection: Start time: 1,177000 seconds
  Newspapers: Lots static mesh: 0 bytes of vertex, 0 bytes index
  Journal: StartMovie with m_PlaybackRect (0, 0), (1024, 768)
  Journal: Precaching: Entry.LevelInfo0
  Journal: Allocation of the dynamic index buffer 16384 bytes.
  Log: Precache time geometry: 0.006 sec total, 0.000 app
  Journal: Texture precache time: 0.009 s total, 0.000 app
  Journal: Statistics of load precache entry: opens 5 to 0, seeks 10 jumps, bed 1512 KB / 28, serialize 1496 KB / 142
  Journal: 131072 bytes dynamic vertex buffer Allocation.
  Caution: Charge Dynamics XInterfaceCTMenus.CTMenuMain
  Journal: GotoMenu (InGameTempName)
  Journal: StartMovie
  Journal: CallMenu (InGameTempName)
  Journal: GotoMenu (InGameTempName)
  Journal: CloseMenu()
  Journal: Browse: PRO? Name = zach? Class = CTCharacters.PlayerCommando? Team = 255 08/09/12 19:21
  Log: Watermark memory pre load: 2
  LOG: Preload PRO Stats: 2 opens, looking for the 14, 15 jumps, bed 1315 KB / 56, serialize 1289 KB / 23365
  Journal: LoadMap: new level of loading. Pause/stop implementing caching of files.
  Journal: Unloading: PRO package
  Journal: LoadMap: PRO? Name = zach? Class = CTCharacters.PlayerCommando? Team = 255 08/09/12 19:21
  ScriptLog: stop menu movie
  Journal: Garbage collection
  Journal: Serving garbage
  Journal: Garbage: objects: 23768-> 23528; REF.: 232574
  Journal: FName High Watermark: 33191
  Journal: Number current FName: 30109
  Journal: FName slots available: 3082
  Journal: UObject High Watermark: 23774
  Log: Watermark memory pre load: 3
  Caution: Charge Dynamics PRO.myLevel
  Journal: 131072 bytes dynamic vertex buffer Allocation.
  Journal: (Karma): initialization Karma for the level.
  Journal: (Karma): Autodetecting CPU SSE
  Journal: (Karma): using SSE optimizations
  Newspapers: Loading PRO time: 0,356 total sec, 0,328 app
  Connection: Hour PRO init actor coll: 0.000 sec total, 0.000 app
  Journal: Play class is 'CTGameInfoSP '.
  Newspaper: The level is level PRO.myLevel
  Journal: What is the PRO.myLevel level to play (0) 08/09/12 19:21...
  ScriptLog: InitGame?: Name = zach? Class = CTCharacters.PlayerCommando? Team = 255
  ScriptLog: Mutator is PRO. InGameTempName
  ScriptLog: GameInfo::InitGame: bEnableStatLogging False
  ScriptLog: MusicStat is InGameTempName
  WARNING: PlayAnim: not found "ActionBreathe" sequence for the mesh "CloneBoy."
  ScriptWarning: PawnFactory PRO. PawnFactory2 (function CTGame.Factory.PostBeginPlay:0058) Factory PRO. PawnFactory2 has no prototype!
  WARNING: PlayAnim: not found "ActionBreathe" sequence for the mesh "GunshipBall."
  ScriptWarning: PawnFactory PRO. PawnFactory0 (function CTGame.

  I read the fix below on three different forums.
  Seems to work for some. Especially those with Pentium cpu.

  "In the main Menu, select Options-> graphics. Variation in the quality of the low relief map. When I have it on medium or high, it crashes. »

  The game was released in ' 05, a bad year for compatibility issues with different
  DRM and Win7. If the problem is with the Launcher, then a noCD fix would be a good solution.
  http://MegaGames.com/games/Star-Wars-Republic-Commando

  .

• Calling a function only when the State is active

  I turn to find the event just to call a function only when the status is active. In fact, I created a State to display the 'product details' click and once the system changes to this State - I have to perform a function.
  
  Here's the context:
  
  Let's say that you are on the home page where you will need to click on a product to see details. By clicking on the product, the State to view the details of the product will be activated and a variable inside the new state you will receive all the data (from the class of product). But I discovered Flex run all States at the beginning and we need to watch how declare our function to make sure that we do not have a null to a variable/object reference. Given that value is moving to the State only when the click event to occur, the process of globalization, execution of all States at the beginning will not have any value yet (for the specific product to deal with in the State of the productDetails). So I can't use creationComplete to perform a simple function like setSpecs(), where all the values (for example, width, height, circumference, diameter, price, etc.) will be instiate specific labels.
  
  What event to use to call a function internal once we are in the State? Just using the creationComplet and stated if he check the currentState = that I have to work on is not enough. I tried 'activate', 'show', 'enterStage' and many others, but without success. I tried to search the Internet, but it seems that this problem is not popular enough to generate sufficient results.
  
  But I know that it is possible in the case otherwise it will be is not logical and since Flex work very well with the event, I found the right event. It's something basic I know, but when you do not know, it seems difficult to find! ;-))

  Thanks Greg!

  I agree, this is a better method. So I'll change my SENSITIVITY to use viewStack instead of the State. But the problem persists what that, if we use the viewStack State to launch an event only when the State/viewStack is displayed on the screen.

  I found something that works very well for me: updateComplete.

  First of all, I found this before reading your information about viewStack so it worked very well for the method of the State. That I decided to do a test to viewStack and made the necessary changes to the code to reflect a viewStack navigation and make sure the updateComplete was not within my component (stateProduct.mxml). The system was not able to view the specification as the setSpecs() function was not instantiate when displayed. I added the updateComplete = "{setSpecs ()} ' and everything worked great!" So I conclude that no matter if you are using a viewStack State, the updateComplete event can be used to run or functions only when the component is displayed on the screen.

  Now, I have to make my transition between the State working with viewStack effect! ;-))

  Thanks to Greg for this useful tip!

• We have dish as a TV provider in the United States.  We have an Apple TV 3rd generation that we use in the Mexico.  Even if I connect to my account of dish, I can't Apps to work on the Mexico.  Applications such as CNN GO.

  In the United States I have the dish as a TV provider.  I can connect flat with my 4 Apple TV version and look at Apps like CBS, CNN, go, etc...  When I try to do the same thing in Mexico with my 3 Apple TV version these same apps do not work.  In Mexico, I have tried resetting everything and through other steps proposed in this forum.  Nothing has worked.

  Hello. I think they can tell where you are by your IP address. Their servers can block content if they are not allowed to provide at your location. You can try to contact the dish.