OME 1.3.0.1533 question; 2.01 will fix it?

Similar Questions

• Anyone know when will fixed the problem of material with the "IPAD PRO"? The question that keeps it from starting after the load.

  Anyone know when will fixed the problem of material with the "IPAD PRO"? The question that keeps it from starting after the load.

  According to Apple, it has been addressed in the latest update of the iOS, iOS 9.2.

• I have a toshiba laptop which has google chrome. The laptop has already installed adobe. My question, my computer will support creative cloud so that I can use Photoshop and Illustrator? Thank you

  I have a toshiba laptop which has google chrome. The laptop has already installed adobe. My question, my computer will support creative cloud so that I can use Photoshop and Illustrator? Thank you

  Hi Julie

  You can check the minimum specifications here:system requirements | Cloud Creative

  Kind regards

  Guinot

• Physical Memory Dump questions - how do I fix it?

  original title: dump of physical memory

  I am not at all computer savvy, I know how to activate and use the every - word, internet basics. I don't know where post a question so if it is in the wrong place please excuse my mistake.

  I have computer problems... physical memory dump.  It seems this is a common problem so why microsoft does not have a free repair to fix the problem.  If there is one, please report it.  If there is no repair Microsoft how to make fixing it without having to pay $50?  Thank you

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Select Start, do a right-click on computer select Properties, advanced, system settings startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  Send a copy of your dumpfile as a shared file on your disc of sky with a link here.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

• Spoolsv.exe question-, nothing seems to fix it.

  I get error spoolssv.exe so prevalent here. So far, nothing suggested by someone I've seen corrects this problem.

  I deleted everything in the \printers\ directory (even if there anything here); fact the variuos regedit suggestions; Spoolsv.exe copied my Windows CD and still no luck.

  I am without ability to print until I can suggest a fix.

  Thanks for any help.

  Thanks for the reply, Chris. It seems I've found the problem. A utility to capture and print screen was hung up my print spooler. It would be nice to be able to use this software, but I have sacrificed my ability to print. I don't know why this software worked before, but now won't.

  The error I received was "Spoolsv.exe has encountered a problem and needs to close" and the "Spoolsv.exe consulted memory to XXXXXXXX and couldn't read/write, etc, etc, etc.

• Dot1x question: authentication MAB will never be failure or timeout

  Hello

  I have a problem when the switch will try to authenticate a device with MAB and it will never, or timeout.

  Here's the situation: where a device has 802 authentication. 1 x active but not a invalid parameters (or missing certificate).

  The switch will start dot1x for the customer and it will not be (a). He will switch to dot1x to MAB and... silence.

  I use a WS-C2960-24LT-L with IOS 15.0 (2) SE.

  Config:

   interface FastEthernet0/16 switchport access vlan 155 switchport mode access authentication event fail action authorize vlan 550 authentication event server dead action authorize vlan 550 authentication event no-response action authorize vlan 550 authentication port-control auto mab dot1x pae authenticator dot1x timeout quiet-period 3 dot1x timeout tx-period 1 spanning-tree portfast spanning-tree bpduguard enable end

  Newspapers:

   Dec 4 17:34:51.064 GMT: %LINK-3-UPDOWN: Interface FastEthernet0/16, changed state to up Dec 4 17:34:51.147 GMT: %AUTHMGR-5-START: Starting 'dot1x' for client (e89a.8fb0.67c3) on Interface Fa0/16 AuditSessionID 0A011246000001187AA1F62B Dec 4 17:34:52.070 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/16, changed state to up Dec 4 17:34:54.234 GMT: %DOT1X-5-FAIL: Authentication failed for client (e89a.8fb0.67c3) on Interface Fa0/16 AuditSessionID 0A011246000001187AA1F62B Dec 4 17:34:54.234 GMT: %AUTHMGR-7-RESULT: Authentication result 'timeout' from 'dot1x' for client (e89a.8fb0.67c3) on Interface Fa0/16 AuditSessionID 0A011246000001187AA1F62B Dec 4 17:34:57.321 GMT: %DOT1X-5-FAIL: Authentication failed for client (e89a.8fb0.67c3) on Interface Fa0/16 AuditSessionID 0A011246000001187AA1F62B Dec 4 17:34:57.321 GMT: %AUTHMGR-7-RESULT: Authentication result 'timeout' from 'dot1x' for client (e89a.8fb0.67c3) on Interface Fa0/16 AuditSessionID 0A011246000001187AA1F62B Dec 4 17:35:00.601 GMT: %DOT1X-5-FAIL: Authentication failed for client (Unknown MAC) on Interface Fa0/16 AuditSessionID 0A011246000001197AA21094 Dec 4 17:35:00.601 GMT: %AUTHMGR-7-RESULT: Authentication result 'no-response' from 'dot1x' for client (Unknown MAC) on Interface Fa0/16 AuditSessionID 0A011246000001197AA21094 Dec 4 17:35:00.601 GMT: %AUTHMGR-7-FAILOVER: Failing over from 'dot1x' for client (Unknown MAC) on Interface Fa0/16 AuditSessionID 0A011246000001197AA21094

  SH int fa0/16 session auth

   Interface: FastEthernet0/16 MAC Address: Unknown IP Address: Unknown Status: Running Domain: UNKNOWN Oper host mode: single-host Oper control dir: both Session timeout: N/A Idle timeout: N/A Common Session ID: 0A011246000001197AA21094 Acct Session ID: 0x00000380 Handle: 0x1700011A Runnable methods list: Method State dot1x Failed over mab Running

  You can see above that is still running MAB but this device is not listed on the local store ID sequence or any where. If I run the command 'No mab', the switch will respond will be unavailable methods more and nothing more.

   Interface MAC Address Method Domain Status Session ID Fa0/16 (unknown) N/A UNKNOWN No Methods 0A011246000001197AA21094

  However, when I remove the command MAB; reset the port; He eventually fail to dot1x and move to restricted VLAN.

  It is this value by default design or the drop between the switch and the ACS authentication? Should I just use MAB where it is needed?

  Thank you in advance.

  On your configuration of the interface, I normally expect to see flex active thus auth:

   authentication priority dot1x mab authentication order dot1x mab authentication event fail action next-method

• Repeat the questions of character: will not repeat when maintained key (even after change of repeat speed & delay at the fastest)

  When I type characters (as well as the arrow keys and backspace) etc they will not repeat when the button is kept pressed and you must wait a few seconds before being able to repeat a character or go back and delete a mistake!  This has been a problem since I accidentally leaned on a button and he kept extensible - a message box emerged by asking (I don't remember verbatum what he said) if I wanted to stop this does not happen - and in my drowsy State, I felt just OK!  I disappeared in the 'control panel' and changed the character of repetition and time short and fast many times and it never changes nothing!  I noticed that when I connect to my computer the character repeat works normally.  I'd appreciate any help because it is frustrating and annoying say the least!  Thank you, Danette

  Hello

  1. have you made changes on the computer recently?

   
  Please check if you face the same problem when recording in safe mode. It is a possibility that one of the non-Microsoft application or driver is causing this issue.
   
  Step 1.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows 7.
  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
  f. do whatever tasks you need and when you are done, reboot to return to normal mode.
   
  Step 2.
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
   
  I hope this helps.

• WiFi is not a valid ip address, complete solutions, but question configuration is not fixed

  I have recently moved into a new place and have problems connecting to the new wifi. Troubleshooting reports "wifi is not a valid IP configuration." He asked me to reset the wifi adapter, obtain new TCP/IP settings for the wifi card and investigating problems of router or modem. I have completed these tasks, but the issue is still not fixed. What should I do?

  Please download this app (minitoolbox)
  Run it with 'select all' checked
  Download output to a drive or any file sharing service
  Put a link to them in your next post
  Please enter each of them in a command prompt high after you run the above and save the file

  ipconfig/flushdns

  ipconfig/registerdns

  ipconfig/release

  ipconfig / renew

  NETSH winsock reset catalog

  NETSH int ipv4 reset reset.log

  NETSH int ipv6 reset reset.log

  Output

• I have two accounts and need to merge into a single account. How? Where even ask this question? CAT will not help this.

  Over the years, I accidentally opened a second Adobe account, both with records of product. I need to merge these accounts into one and don't see any way to do it. Software updates will not be installed because series for the previous version not found on upgrade version currently installed. The 2 different accounts would be a cause for this?  I have not received any help at all cat.

  Adobe chat support is likely to be the only resource able to deal with your account.

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...

  Support of Adobe ID and registration of chat (non - CC)
  http://helpx.Adobe.com/x-productkb/global/service-C1.html ( http://adobe.ly/19r6ZDp )

• QUESTION: How do I fix the error of Lightroom 3.6 and Failure to Launch

  3.6 LR lance is no longer for me. I get the error message: "the catalog Lightroom called 'Catalogue Lightroom 3' cannot be opend because another application already has its opening." "Leave the other copy of Lightroom before trying to launch. As far as I know, there is NO open copy but LR 3.6 will not longer. It makes no difference if I re-boot or not. Sometimes I have PS Elements open, sometimes not when I try to open LR 3.6, once again, makes no difference, the same error comes up and I can't use the program. What should I do to get this tool open and usable again? This error will be like a software bug for me, not a good thing for users.

  Thanks for your suggestions!

  4eversteam

  There is a file in the same directory as your catalog that has the extension ".lock". Delete it and you will be able to run Lightroom.

  To find your catalog (s), search for "." LRCAT'

  HAL

• General question about the bug fixes and patches

  11.5.10 CU2 environment and I'm trying to understand how bug_id, the bug_numbers and patches are associated.
  In my case I'm looking for a certain numero_de_bogue because I was told that introduced a change in my environment.
  I can find it by querying ad_bugs but how do I determine this patch introduced this bug?
  
  Also, what is the association between bug_id and bu_number?

  Hello

  11.5.10 CU2 environment and I'm trying to understand how bug_id, the bug_numbers and patches are associated.

  See website for eTRM.

  http://ETRM.Oracle.com
  http://ETRM.Oracle.com/pls/trm11510/etrm_pnav.show_object?c_name=AD_BUGS&c_owner=APPLSYS&c_type=table

  In my case I'm looking for a certain numero_de_bogue because I was told that introduced a change in my environment.
  I can find it by querying ad_bugs but how do I determine this patch introduced this bug?

  You'll have to ask numero_de_bogue is ad_bugs table. For a list of each patch fixes, please see the Readme for the patch. You can also view the same OAM.

  Also, what is the association between bug_id and bu_number?

  BUG_ID is simply a sequence and numero_de_bogue stores the patch number.

  How to check if a certain Patch has been applied to the Oracle Applications instance? [443761.1 ID]

  Thank you
  Hussein

• Newbie question: best way to fix the photo with the glare of the Sun highlights

  I'm trying to fix a picture of faces that are almost white in the Sun in places (Photoshop CS4).  I tried different settings, but none of my results were satisfactory.  I would be grateful for advice.

  

  You can't make pixels where there is no pixel.

  The only thing to try would be to paint in color with a large soft brush to a low opacity.

• Audio tinny in questions of fcp10.3

  Hi everyone, I'm importing clips video mpeg4 of Dropbox, the audio sounds great they are studio quality registered. However, once imported into fcp, they sound "tinny."  I saw somewhere a post by checking the guarded hunting ground, but when I go to that in the menu audio checked it's grayed out, so I can't change it.  That's the problem, if so, how can I uncheck it or is there another solution to fixing this problem.

  Thanks for your suggestions.

  Preserve Pitch applies only to the re-timmed audio.  MPEG4 audio is horrible to use for editing.  I strongly suggest optimizing those clips first, don't bother with MP4.  The audio is probably in a compressed format super duper inside this envelope.  That's the question, and only reformat audio compression will fix it.

• How can I add a response at the end of each point of the issue in a list of questions and send back to the sender?

  I have emails that require some points to address such as "Please fix leak in the bathroom sink' and then the next line will be another application and so on. I would like to answer each question at the end of each line with a response (preferably in a different color to stand out police) such as "Yes - will fix" or "that cannot be done" or "you'll have to fix that yourself." So, I want to send this reply to the original sender.

  It is probably easiest to copy and paste the initial list of questions in your answer, first of all and then add your comments.

  If you have the problem that the list numbers change when you try to add your comment about a new line, try to make your line breaks using shift + enter instead of the entry.

• How to view the answers to my question?

  I'm registered, asked a question. Now where and how to display the answers?

  Hello

  After signing in, please move the cursor to your name above. Click on view profile. After that, click on questions. It will take the questions you asked with this profile. If I'm not mistaken, so here's the question Las you requested:- https://support.mozilla.org/en-US/questions/1032279?esab=a & s = & r = 1 & as = s

  Thank you.