Newbie question: best way to fix the photo with the glare of the Sun highlights

Similar Questions

• I bought CS6 extended yesterday (yes I did). I have CS4 and many photos in bridge (keywords tag). What is the best way to make my photos in bridge cs4 cs6? Is there a guide how to go about so I do not lose one of my keywords/photos? WH

  I bought CS6 extended yesterday (yes I did). I have CS4 and many photos in bridge (keywords tag). What is the best way to make my photos in bridge cs4 cs6? Y at - it a guide how to: so I do not lose one of my keywords/photos? Who can help?

  Keywords travel with the file, so it shouldn't be a problem. Here's how export you key word of CS4 information and import it into CS6.

  How to import metadata and keywords Bridge to CS6 in CS4 so that I don't lose if CS4 is not

  I hope that your situation is not as complicated.

  Gene

• Need help: best way to exchange the Ipads?

  Dear all,

  Need help a genre:

  I use Ipad Air2 and my father is using retina Ipad Mini... I gifted him before 2 years...!

  We thought to share the Ipads because he loved the biggest... Can someone guide what is the best way to swap the parameters of the iPad?

  It is by taking backup and restore from Icloud? There will be data loss? or anything else that needs attention (something that he needed to be reconfigured)?

  Any help is very appreciated!

  Make a backup of each individual iPad. Use your own accounts: How to back up your device using iCloud or iTunes - Apple Support

  Import your photos from each iPad: import pictures and videos from your iPad, iPhone or iPod touch to your computer - Apple Support

  Then do it on every iPad: what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

  Then restore the backup in your 'new' ipads: restore your device from an iCloud or iTunes backup - Apple Support

  If the ipads have the same size of storage with the same iOS version, it should work fine. -AJ

• Best way to update the individual rows of a Table?

  I took a quick glance at a few examples, but did not get a clarification on this.  I am looking to have something close to a listbox control or the table to where I can update just one column of values to line a 1 time per second pace.  I'm looking to display our acquisition of data values in a table or a listbox control.  The single list box seemed to work well for that, but I couldn't use the row headers to list the names of channel beside the channel values.  I thought to link the values of cursor in two areas of list to do this, but did not find any info on it for the single list box.

  I have a few questions:

  (1) I have a 1 d table to where I want to use this data to constantly update the first column (with a multitude of lines) of a table.  I'm looking for the best route to not take too much time for treatment by doing this.

  What is the best way to update the individual rows of a table?   Invoke the node "Value of the cell value"... or is there another method?

  (2) why is that, after each iteration else, row values are deleted?

  Also, for adding additional channels originally arrray... it is better to use the 'Array' subset then the function "Construct the table" or function "Subset of the table" and "insert table"?

  See the attached example.

  Thank you.

  Jeff· Þ· Bohrer says:

  (2) why is that, after each iteration else, row values are deleted?

  Classic race condition.  dump the loop and node-p and just wire the 2D table on the terminal Board. !

  I don't see the race condition.  What I see is the table once the last element has been written for it all run the oil.  I saw looked it with point culminating performance on.

  But I agree entirely with writing to the Terminal.  It is a 1 d array, so you will need to use an array of generation and convert a 2D array in order so that he could write correctly.

• What is the best way to store the RCS for an insert/update in this rec

  Oracle on Win 64 non-conteneur 12.1.0.2

  When a record in one table is inserted or updated, what would be the best way to store the RCS for this record in this folder.

  I thought of a line after trigger, but did not know if this trigger to store the current_scn would still fire that trigger again (recursive trigger).

  Someone at - he a good idea of what the best way is to do?  The devs don't want to store the pk and the SNA in yet another table...

  Yes, row_dependencies would be the best way to go.  But mgmt doesn't recreate all tables for this.

  3rd party applications retrieve data from tables (all data).  We are looking for a way for them to just pull what is new or updated updated since their last sweater.

  I suggest that you try again and give all OF THE REQUIREMENTS.

  You have rejected ANY answer given and he justified using 'hidden' on what knowledge management or the devs want or do not want to. Stop making us guess what are the requirements and constraints. If you want a real answer then tell us ALL the news.

  When a record in one table is inserted or updated, what would be the best way to store the RCS for this record in this folder.

  Solomon answered repeatedly. If you want to add a column to a table to store the then "best" SNA is to let the Oracle to do this for you automatically by using the DEPENDENCY LINE.

  As he says also re-create the table to add this clause will be MUCH MORE EFFECTIVE that everything THAT you can do it manually. It will be also more accurate because Oracle will fill the value ORA_ROWSCN with the SNA at the time the line was committed. You, as long as user, can't fill a column in function when a line is engaged since real VALIDATION belongs to a transaction, not the line or the trigger that you use.

  Yes - there are two drawbacks to this method:

  1. you need to re-create the table

  2. you cannot add an index to this "hidden" column

  The devs don't want to store the pk and the SNA in yet another table...

  Then? Who cares what the devs want to do? You want the BEST solution? Next, you will need to put aside personal preferences and determine what is the 'best' solution. Why it is important that certain dev wants to do this or not?

  OK, the problem of biz is now, 3rd party external users are an all-wheel drive large number of tables in the database via the API that we wrote.  That was obviously interrupted OLTP during the day.  To reduce to the minimum, we want for them just to extract data that has been inserted/updated since their last sweater.

  It is the definition of a "replica" DB Then why don't you consider a real replicated DB? You can use DataGuard and have replicated DB which is read only that can be used to generate reports. Oracle does ALL the work to keep ALL the tables in sync. You and your developers do NOTHING!

  We thought that store the RCS higher their last sweater would allow the API to extract only data with YVERT higher than their last data pull CHN.

  OK - except you keep rejecting solutions actually do. Ask you questions about the SNA stored in the same table, but then reject the solution that does this. And then you add your "devs" don't want to store the info in a new table either.

  Then your solutions must ONLY use the replication or Log Miner. The REDO logs have all changes, if you want to extract yourself. Replication (e.g., DataGuard) will use these logs for you to maintain a replicated database.

  We thought about it, but recreate all tables in production with ROWDEPENDENCIES as well as dealing with CF and other dependencies idea this was shot.

  Well you NEVER mentioned you "thought that" and rejected it. And you NEVER mentioned anything about FKs and other dependencies. What is FKs and other dependencies which prevents this working solution? Tell us! Give us ALL the information.

  Wouldn't a trigger AFTER LINE capture the commit YVERT?  Or is after really not after validation?

  No - a trigger has NOT one commit. A trigger runs as a step in a transaction. Validation applies to the entire transaction. Until you, or Oracle, issues a commit, there is NO "committed SNA" to be stored as ORA_ROWSCN.

  You can easily see that for yourself. Create a simple table with dependencies of the line and then update two different sessions.

  create the table emp_scn rowdependencies in select * from emp where rownum<>

  Select empno, emp_scn ora_rowscn

  Update emp_scn set work = 'b' where empno = 7499

  commit;

  The first SELECT statement will show you that each row has the same SNA.

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,70622201

  7521,70622201

  Now, do the update (but no commit), then SELECT it

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,

  7521,70622201

  Where is the value of 7499? This session will NOT see a value for the changed lines in the current transaction. Other sessions will still see the old value.

  Now do the validation, then SELECT

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,70622301

  7521,70622201

  7499 now has a new and different value than the other lines. It will not be this new value until the validation occurs.

  Yes, row_dependencies would be the best way to go.  But mgmt doesn't recreate all tables for this.

  Well, you got the answer you want. You ask the best way. Now, you say that you were told the best way. But now you don't like the answer.

  How is it our fault? Your question has been answered wasn't she?

  Here are the facts:

  1 oracle creates a history of changes - the REDO log files

  2. you can use Log Miner to extract these changes

  3. you can create your own change log by adding a log file of MV to your table.

  4. you can then write a custom code to use this MV log file to determine which rows to "reproduce".

  So far reject you all THE POSSIBLE solutions.

  Accept it or change the requirements to allow one of the solutions proposed to be used.

  Personally, if I HAD to use a customized solution, I would use a MV journal to record the ROWID of the lines that have changed (for tables ROWID cannot be changed). I would then extract the appropriate lines by pulling on the lines corresponding to these row ID.

  Even that has problems since a line can be changed several times and children lines can also be amended several times - these questions FK you mentioned.

  I suggest you read this entire thread on AskTom a dozen years ago. It addresses ALL these issues.

  https://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:16998677475837

  Then in your next reply on this topic give us a summary of where some things with your question and what help you further expect.

• What is the best way to edit the pixels of the layer without applying the image?

  Help, please!?

  What is the best way to change the pixels on a new layer (clone, healing, patch or selection) without applying the image? When I do that, I can't change the under layer if I make a mistake.

  Does this make any sense!

  You want to use the patch tool to put the fix on its own layer? Use sample all layers in the Options bar.

• Best way to share your photos - PSE 14?

  What is the best way to share your photos?

  When I consult with PSE 14 mode full screen, I see the full picture with captions.

  However:

  • Legends are not available in mode see the hand PDF Slide.
  • Create PDF Slide show mode, subtitles are available.
    • Howevever the full picture is not available. Most of the "themes" seem to cut the top and the bottom of certain images
    • And the themes seem to hijack images, rather than simply presenting the photos.

  Would like to be able to capture and send the view from the mode full-screen as a PDF or something.

  Still, what is the best way to share photos by e-mail?

  Thank you... Ron

  We have all different ideas on sharing via "email address" and often features elements are not satisfactory for our purpose. You have perfectly described two features of pdf, share via the output to a pdf slide show (or video) or pdf.

  Both are quick and easy, but there is no direct way to display captions with images full resolution and without transition effects.

  You can use the function 'Print' with 'other options' Organizer configured to display captions, date... and specify one of many virtual printer drivers send the result to PDF instead of printing (standard in Windows 10). A quick and automated to produce a PDF without transitions and captions.

  Or you can use a free, good software like Faststone resizer to prepare your output with more control over the size and position of the legend.

  I have another problem: my use of the legends is such that I'm not all the legends that are shown, and I don't want each picture to have a caption (or title or date...) In fact, the text I want to appear on the pdf presentation would be specific to each image, with a different position depending on the image. It can be done with some work, and the result is much better.

  When I want to share (I like Dropbox, but other storage cloud solutions are good), I choose my output size: (rare), HD TV screen full resolution or smaller. The Organizer, I do a resize a selection based on the height in pixels, then another resize a canvas based on the width, in pixels, with a black background. Can I edit the files individually to add text (not necessarily the legends) where I want to. It's the only job that requires little time, but the result is much better than including legends, both for the appearance of the text and the coherence of the story.

• Best way to discover the top N

  Hi all

  Sorry to ask a question on Friday. I've had this issue for some time now, what is the best way to discover the first N?

  For example, how do you know top 10 Web hosts that have the highest use of CPU for a certain period of time.

  One way to do is to create a WCF application that returns topN HostCPUs order to use/period/average. When the interval is small, like the last hour, it works, but if I increase the time range from 1 day, the request will expire after 60 seconds. We have 500 + guests on this FMS. Not only we want to watch the hot servers right now, but also want to watch the hot servers say yesterday, or last month.

  Another way is to use groovy code below, when I use retrieveLatestValue to get the current value, it's fast, but if I replace it with retrieveAggregate and make the time range for the previous 24 hours, it takes a few minutes to run.

  #! HostCPUs # .getTopologyObjects (extinguish) {a, b->

  go = server. DataService.retrieveLatestValue (a 'use'). value?. AVG

  If (goes == null)

  go = 0

  VB = server. DataService.retrieveLatestValue (b, 'use'). value?. AVG

  If (vb is nothing)

  VB = 0

  VA - vb > 0? 0: 1

  } .subList (0, 10)

  Then, of course, these are not very effective. Is there a better way to get this top N list I'm looking for?

  Thank you

  Xiaoning

  Here is an example of the batch api to query the memory of the virtual machine, and then I take action on a specific period of time.

  import com.quest.nitro.service.sl.interfaces.data.IDataService;

  import com.quest.nitro.service.sl.interfaces.data.ObservationQuery;

  import com.quest.nitro.model.topology.TopologyObject;

  import com.quest.nitro.service.sl.ServiceLocatorFactory;

  Import org.apache.log4j.Logger;

  def LOG = Logger.getLogger ("batch.query.test");

  topologyObjects = new HashSet (#!) VMWVirtualMachineMemory # .topologyObjects);

  Log.info ("topology objects querying ${topologyObjects.size ()}...");

  endTime = System.currentTimeMillis ();

  startTime = endTime - (4 * 60 * 60 * 1000 L);

  IDataService dataSvc is ServiceLocatorFactory.getLocator () .getDataService ();.

  Query ObservationQuery = dataSvc.createObservationQuery ();

  query.setStartTime (startTime);

  query.setEndTime (endTime);

  Query.include (topologyObjects, "active");

  Query.include (topologyObjects, "affected");

  Query.include (topologyObjects, "zero");

  result = dataSvc.performQuery (query);

  long term = System.currentTimeMillis () - endTime;

  Log.info ("request completed in ${duration} ms.");

• What would be the best way to address the issue...

  Hey all,.

  I have a Setup with several centers of installation data in the Datacenter location xml.  Now for one of these data centers, I need to submit another question or option for the customer to choose a or b, but only for the datacenter when selected.

  What would be the best way to address the issue?

  Thank you

  Steve

  Here's a good post who will guide you.

  [virtualjad.com]: vCAC dictionary of properties: customize applications for Service with dynamic Menus

• Best way to combine the 8-bit and 16-bit image files?

  I produce large photographic reproductions combining my own photo images modified RAW 16-bit with 8-bit stock photos and 8-bit of photoshop work. I used just reduce my photos from 16-bit to 8-bit and then change my image composite 8-bit, but I stumbled on the banding and other problems in the color gradients, I created later in my composite image.

  I want my composite image at 16 bits to get more specific and better degraded colors. What is the best way to bring the image to 8-bit files in my composition and maintain the best quality? Is it good to convert images to 8-bit to 16-bit in PS, before you import it? I've also heard bringing 8-bit images as smart objects? Thanks for any help on this.

  Even when there is no need to convert the document to the item in 16-bit mode is not.  If you need all the layers to adjust the image of the element to be light or mix better, it's better you have two choices. Do not open the file of the item in Place as a smart object layer and then open the embedded object and change the copy of your document.  Or open the target document element all the layers and then drag the document you are working on.

  The second way would produce a larger file of the document then the smart object layer way. For all layers will be 16-bit color. When the layer of integrated dynamic object is a copy of an 8-bit image file only the composite made of pixels of the object is to convert 16-bit mode.  A smart object layers pixel is like a whose pixel raster layer cannot be changed only acted on.  To change the pixels, you need to open the embedded object and modify the object.

  If you do not need the layer, you can simply drag into those that you need.  Yet once, there is no need to convert the document to the 16-bit mode, Photoshop element that will be in any copy of drag layers.

  When you use Photoshop how to think or what Photoshop just make how he could do. Shortly after, you will have a better understanding of what is happening.

• What is the best way to make the uniform skin (not necessarily blur it!)

  Hello

  I have some photos where the skin of the leg of the model is not uniform brighteness. Without this vagueness, I tried the clone stamp, but it is very difficult not to introduce new variations of brightness.

  What is the best way to make the uniform skin of brightness (in fact, the same color!)?

  Thank you

  Juan dent

  I know EXACTLY what you mean.  I was doing something exactly on these lines just yesterday.

  It is not trivial, but it is doable.

  For 'hard points', you can try the Spot Healing Brush first.

  But here is a tip that I use sometimes which may well increase overall finesse:

  1. select just the surface of the skin.

  2. selection a little market and soften the edge, just to make sure that you don't mess the edges.

  3. median filter - noise - and set the RADIUS to be big enough.  Look at the image to see the level of smoothing.

  4. change - bland and knock back effect, while it is not perfect, but makes a subtle improvement.

  

  

  

  Then, for clearing-up soft darkening, try the burn and Dodge tools, at a low level of exposure (and possibly with Airbrush Mode).  Work slow.

  Cloning with low opacity can sometimes help as well.

  -Christmas

• What is the best way to place the image (with legend) in a book?

  I am preparing a model for an encyclopedia project, the encyclopedia will be in addition to 10000 pages, so what is the best way to place the images (Photos, graphic illustration,... etc) with a legend?

  The problem that when I change the text; the image does not move with it, and when I place it in the text, it is difficult to control text flow.

  Please help

  I think so, but it can be a little weird, if the position of the anchor is on the second page of a two page spread. Really, I jumped in to suggest the image and the legend of consolidation before anchoring.

• Best way to write the Pl/Sql

  Hi all
  Can someone say best written below stored proc:
  
  procedure missing_authorized_services is
  v_truncate_sql varchar2 (200);
  v_sql varchar2 (2000);
  BEGIN
  v_truncate_sql: = "truncate table missing_authorized_services;
  immediately run v_truncate_sql;
  commit;
  
  v_sql: = "INSERT into missing_authorized_services select distinct trim (service_group_Cd) as service_group_Cd, trim (service_cd) as stage_1_mg_service_request service_cd
  where (service_group_cd, service_cd) not in)
  Select distinct service_group_cd, stage_3_servcd_servgrp_dim service_cd)';
  
  immediately run v_sql;
  commit;
  
  END missing_authorized_services;
  
  
  / * I do select the table and then try to insert into another table the result set * /.
  
  Please help,
  Thank you
  J

  Hello

  The best way to write the PL/SQL (or any code) is by small steps.
  Start with a very simple procedure that does something (anything), just enough to make sure it works.
  Add a lot of statements of output so you can see what made the procedure. Don't forget to delete them after that trial is over.

  For example:

  CREATE OR REPLACE procedure missing_authorized_services IS
          v_truncate_sql  VARCHAR2 (200);
  BEGIN
       v_truncate_sql := 'truncate table missing_authorized_services';
       dbms_output.put_line (  v_truncate_sql
                      || ' = v_truncate_sql inside missing_authorized_services'
                      );
  END      missing_authorized_services;
  

  If you get any errors (for example, ORA-00955, because you try to give the same name to a procedure that you already use for a table), then fix the error and try again.
  When he worls perfectly, then add another baby step. For example, you can add the line

  EXECUTE IMMEDIATE v_truncate_sql;
  

  and test again.

  Do not use SQL dynamic (EXECUTE IMMEDIATE) unless you have to.
  Is there a reason to use dynamic SQL for INSERT statements?

• best way to make the guests timeout?

  I use MX 2004, and I need timeout voiceover guests. What is the best way to accomplish the timing? I used onEnterFrame countdown timers, but, but I had mixed - they do not have to be too precise, just working with a few predictabillity. I also fear that using onEnterFrame can slow things down too.
  
  I tried to use setInterval directly and have the time range to clear himself, but it didn't. I also tried setTimeout function of Senocular who uses setInterval, but it works only once, same kind of thing, I've tried in simpler form. I tried different things and now I'm all confuzzled - they sometimes work and sometimes not. I should probably start from zero (new), but times are looming and I can't think straight - I'm just a little thrasing autour - I also tried a 'status quo' loop, but then I get a "slow script" warning
  
  I think part of the problem is that I have a voice-over as guests and they are not finished at the time that the interval is disabled. I have them preloaded in a swf file and load the film like this.
  
  The tips are greatly appreciated, TIA!

  setInterval() always works and is fairly accurate, except if you need nearby 10 accuracy Ms (in which case you can fix setInterval to maintain the precise timing).

  any problem with your intervals of compensation is a problem coding and encoder.

• What is the best way to call the Java method in JSP in weblogic 10.3

  Hello
  
  What is the best way to call the Java method in JSP in weblogic 10.3?
  
  Thank you for your help in advance.
  
  Thank you
  Manu

  Hello Manu,

  If I understand your question, all you need to do is import the Java class you want to create / obtain an instance of it (if you're not calling a static method), then call the method, the entire interior of the JSP. It works the same way in Weblogic that it works in any JSP.

  Kevin