Omen Notebook: Connect laptop computer to an external monitor - what is the maximum resolution?

Omen laptop with NVIDIA GeForce GTX 860 M

If I connect it to an external monitor via HDMI cables OK, can I get a resolution on this higer native 1920 x 1080 p monitor to the laptop?

Would it not be possible to go as high as 4K?

Thank you!

Exodus79 wrote:

...  Would it not be possible to go as high as 4K?

Hello

No, you won't get out 4K, you can normally get out FHD HDMI to your laptop which is 1920 x 1080

Kind regards.

Tags: HP Gaming

Similar Questions

  • Portege M200 with external monitor - what is the best resolution?

    As a result of a recent post on using an external monitor with the M400, I have a question on the use of one with the M200. I realize that the M200 uses the graphics card Nvidia rather than the graphics card Intel in the M400 - is it better with regard to the use of an external display is concerned? The M200 manual says that it will support up to 1600 x 1536 resolution on an external display. I want to use my M200 in a docking station with an external monitor to the extended desktop.

    What would be the best resolution to go with externally? Should I go for 1400 x 1050 screen LCD M200 match? Or could I go for a 1600 x 1200, that should the graphics card (!) be able to cope? Or, finally, if I went to a widescreen 1680 x 1050, how would the face Nvidia card? The screen is not as clear as with the 1600 x 1050 screen?

    What are the chances of work at all? I see in the M400 manual which she is supposed to support 2048 x 1536 on an external monitor, but this seems to be a problem, judging from the other post.

    Any help appreciated - thanks

    Hello

    Well, the resolution of the screen depends primarily on the graphics card.
    If you want to use a display resolution that the graphics card must support. In addition, the graphics card driver is important. If the graphics card will support the resolution of the screen, BUT the resolution is not listed in the graphics driver, so you will not be able to choose this value.

    To my knowledge, if you use the docking station you will get Supportepar as the notebook display resolutions.
    The resolution of the external display also depends on the external display. If the material of the monitor will not support the resolution so you will not be able to get all the images on the external monitor.

    I think the best way is to test that the resolution is the best. Some people prefer the high resolution of small icons and other blind ;) like low resolutions (1024 x 768) because of the large icons

  • w540: what is the maximum resolution of an external display?

    I have thinkpad w540

    ID:

    20BGCTO1WW

    video card:

    NVIDIA quadro k2100m

    Where, where! He told me the maximum resolution to an external display by using the displayport.

    Thank you.

    Take a look at the specifications:
    http://PSREF.Lenovo.com/PSREFUploadFile%5CSys/PDF/ThinkPad/ThinkPad%20W540/ThinkPad_W540_Platform_Sp...

    The port of Thunderbolt, you will get a maximum of 3840 x 2160 (sometimes called '4K') to a refresh rate of 60 Hz.

  • Computer HP laptop-15-AY012DX: what is the maximum can RAM my HP for computer laptop-15-AY012DX going up?

    Hi all

    I lost my manual book and I have a problem to find the what is the maximum can RAM that my HP for computer laptop-15-AY012DX is going up? Your help is appreciated.

    Thank you and best regards.

    Hello

    According to PartSurfer your laptop has DDR4, read it again:

    http://PartSurfer.HP.com/search.aspx?SearchText=X0S24UA

    http://h10032.www1.HP.com/CTG/manual/c05087748

    Memory module (PC4, 17000, 2133 MHz)
    For models with 6 processors Intel Core of generation:
    8 GB 820570-005
    4 GB 820569-005
    2 GB 851379-005

    Two non-customer-accessible/expandable memory
    housing for module (Intel processors)
    Supported dual channel DDR4-2133

    Supports up to 16 GB of RAM in the following conƭgurations

    16384 MB total system memory (8192 × 2)
    12288 MB ● total system memory (8192 × 1).
    + (4096 × 1).
    ● 8192 MB total system memory (8192 × 1) or
    (4096 × 2)
    Total 6144 MB ● system memory (4096 × 1).
    + (2 048 × 1).
    ● total 4096 MB system memory (4096 × 1) or
    (2048 × 2)
    ● total 2048 MB system memory (2 048 × 1).
    Two non-customer-accessible/expandable memory

  • I have the Windows Vista operating system. Whenever I connect my computer, I get two pop ups on the taskbar. One is jucheck.exec and another is updates of Java.

    I have the Windows Vista operating system. Whenever I connect my computer, I get two pop ups on the taskbar. One is jucheck.exec and another is updates of Java.

    I have no way to uncheck the premiera. I have only two options, restore or close. With java, I opened the properties and click to remove the check mark from updates, you click on apply and then clicked on ok, but he still continues to appear you have tips on how can stop these pop ups?

    Hello

    I would like to inform you that Jucheck.exe is the process that runs automatically when the Java Update tool is activated. Jucheck.exe usually checks the Internet for the software updates available and invite you to install them to keep your updated program. If you prefer to search and download the Java updates manually whenever you want, disable Java Update automatic tool disables and removes Jucheck.exe

    It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  • I would like to change my subscription to a new laptop computer. Can I just disconnect on the old laptop and upload the new or should I uninstall on the old?   I also installed on my desktop that will not change. Thank you!

    I would like to change my subscription to a new laptop computer. Can I just disconnect on the old laptop and upload the new or should I uninstall on the old?   I also installed on my desktop that will not change. Thank you!

    Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 can help

    -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

    -or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  • Impossible to add an external monitor or adjust the brightness of the screen: Pavilion dv7-4031TX (Windows 7)

    Hello

    I recently replaced both hard drives of HDD2K12, which meant I had to re-enstall Windows 7. Since that time, I have no options more in using an external monitor or even the brightness of the screen. The computer does not recognize the monitor when I Plug and all my drivers are up to date.

    Can you make suggestions that could help to solve these two problems?

    Kind regards

    Peter

    Thanks to find the links but I could not find the drivers I need for a Pavilion dv7-4031TX.

    However I finally managed to fix the problem. Let me summarize what has been my problem.

    (1) I could not adjust the brightness of the screen by using the function keys f2 and f3.

    (2) I couldn't find the brightness slider if it was generally... i.e. (control Panel\Hardware and Options of Sound\Power)

    (3) my laptop would not recognize an external monitor.

    How I solved the problem:

    1 > pass.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-95107-1 & CC = in the & DLC = in & LC = on & os = 4063 & Product = 4253423 & sw_lang =

    and go to the graphics driver and download the graphics driver and follow the directions. At the end of the installation you will be asked to restart the computer.

    0nce you have restarted your computer, you should be able to adjust the brightness of the screen using the fn keys or the brightness slider in the window 'power Option '.

    2 > Activting 2nd monitor

    Click on Device Manager... At start-> right click on 'Computer' and click 'properties '. Click on "Device Manager". Now click on "monitors".

    Now connect the exernal monitor to your laptop while watching where the monitor icon appears under "monitors". It should appear as 'Generic PNP monitor'.

    Now, right-click on it and select "update driver software... "then search automatically for updated drivers. Install the new drivers. You should see the generic 'PNP monitor' name change to another name.

    3 > restart your computer. You should find that after doing all this, you should be back to normal.

    Concerning

    Peter

  • HP DV7-3063cl laptop PC: what is the maximum temperature for safe operation of the DV7 3063 cl with the upgrade of the 640 M CPU?

    I have recently restored a HP DV7 3063 cl laptop that died a hot mother (MB). I replaced the MB with a new Board of Directors of HP when the price has been reduced to $100, updated the CPU with an announced as new AMD 640 M and applied Arctic Silver on CPU and graphics chips. I put in 4 G memory cool, got the computer to work and installed Windows 10.

    The computer seems to run very hot and stopped twice from overheating during its first period of 2 weeks when it there was not a lot of calculating, fan was run at top speed at all times, and the laptop was high to allow good airflow below.

    According to the program of the Open Hardware Monitor, the CPU had reached 97-99 C a few times. I bought support cooling a player and that seems to help a lot, dropping the temperature to 20 ° C.

    What is the maximum temperature for safe operation of the DV7 with the upgrade of the 640 M CPU?

    Anything more than 90 c is too hot. You can specify the processor and the motherboard you have installed?

    Also if this from the Manual:

    Thermal paste is used on 1 CPU and heat sink section 2 that the services it. Thermal pads are used on the chip Northbridge 3 and 4, the graphical subsystem chip 5 contact Northbridge and graphics/heatsink contact 6. Thermal material replacement is included with all kits of spare parts of processor, heatsink and system board.

    So unless you have changed the cooling system to heat composed on the chip graphic you should have used a thermal buffer. Without the pad, it may leave just a small hallway and destroy the cooling properties. You can use a shim in copper or other piece of something metal to fill the void, but if you just put the heat sink down on the video chip you won't get optimal even with thermal cooling paste.

  • What is the maximum system RAM for PC laptop HP Pavilion e113dx 17?

    What is the maximum system RAM for PC laptop HP Pavilion e113dx 17?

    Depending on on where I look, I seem to get contradictory information

    New HP 17 laptop AMD configurations = 12 GB max

    Crucial.com = Memory Configurator, max 8 GB

    I think the max is 12 GB (4 GB in slot 2 and the option to add a 8 GB RAM module)

    Thanks for all the help

    Hello

    The following link shows its specifications:

    http://support.HP.com/us-en/document/c04170665

    Only 8 Gb normally with two RAM slots, they have max: 2, 4, 8, 16, 32. No odd 12 GB.

    Kind regards.

  • What is the maximum size of hard drive, which can be installed in a pavilion d4790y desktop computer?

    What is the maximum size of hard drive, which can be installed in a desktop pavilion d4790y?

    It would be a secondary drive, not the boot drive.

    The operating system is Vista Home Premium, 32-bit.  The version of the BIOS is 5.08.

    Are there any changes or upgrades that would allow an internal hard drive 3 TB to install?

    Here are the specifications and configurable options for your desktop HP Pavilion d4790y and here are the specifications of its card mother P5BW - THE (Basswood2). Based on the specifications and the age of the computer, I would expect you to use a hard drive 3 TB as a secondary drive on Windows Vista (DISPLACEMENT SP1 or SP2) and Windows 7. Formatted as MBR would require the drive to use with a minimum of two partitions. Formatted as GPT would require only a single partition. In no case will you be able to use the 3 TB as a boot device drive because your computer does not support a UEFI BIOS that allows booting from a GPT formatted disk. No changes or updated should be held.

  • What is the maximum. Size (GB) and RPM HARD drive that works in a Compaq CQ62-219WM laptop PC?

    What is the maximum. Size (GB) and RPM HARD drive that works in a Compaq CQ62-219WM laptop PC? Want a 750 GB 7200 RPM.

    davidljtn44

    Hello

    1. RAM: please look at this: (total 8 GB max).

    http://www.crucial.com/upgrade/HP+-+Compaq-memory/Presario+CQ62+series/Presario+CQ62-219WM-upgrades.html

    2. HARD drive: no problem. It can use 750 GB 7200 rpm or more.

    Good luck

  • What is the maximum memory for this computer what kind

    I want to restore my system like new or factory but I have no disk what the best thing to do and what is the maximum memory for this computer, what type and how much slot I only see 2 slots without any, but the system say that this computer has 512 MB of ram. This model says Dell Dimension8100. Thank you.

    What is the maximum memory for this computer, what type and how much slot I only see 2 slots without any, but the system say that this computer has 512 MB of ram. This model says Dell Dimension8100. Thank you.

    Maximum RAM 2 GB

    http://support.Dell.com/support/eDOCS/systems/dsleest/specs.htm#memory

    Note: the manufacturer was required to provide a way to reinstall Windows. If it is not a set of disks with the computer, there will be a hidden restore partition (do not be confused with the system restore), you would use to return the computer to the State of the OOBE (Out of Box Experience).

    Usually, just by pressing F11 continuously during the computer startup to display a boot menu offering the option you need.

    You may need to contact the manufacturer of your hardware (Dell) to see what options they have to repair Windows.

    UTC/GMT is 20:35 on Saturday, May 26, 2012

  • I would like to know what is the maximum RAM in a HP Pavilion zv6000 laptop?

    I would like to know what is the maximum amount of RAM in a HP Pavilion zv6000 laptop? Just reply to; [Personal information]. Thank you

    Hello:

    Here is the link to the service manual for your laptop.

    http://h10032.www1.HP.com/CTG/manual/c00364919.PDF

    Info upgrade memory located on page 1-2.

  • I INSTALLED A PROGRAM ON MY COMPUTER THAT ME GIVES A DIFFERENT FROM THAT ONE KEY TO THE BACK OF THE COMPUTER YHE. WHY? WHAT IS THE REAL KEY?

    I INSTALLED A PROGRAM ON MY COMPUTER THAT ME GIVES A DIFFERENT FROM THAT ONE KEY TO THE BACK OF THE COMPUTER YHE. WHY? WHAT IS THE REAL KEY?

    I HOPE FOR SUPPORT OF MY FRIEND FROM JAMAICA

    IT IS FASTER THAN USAIN BOLT AND MORE AMIABLE THA BOB MARLEY

    Thank you

    Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

    (A) OEM SLP: this key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

    (B) SLP COA: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

  • How do I know if my laptop can run an external monitor as well as it's own screen

    I try to run a presentation with powerpoint and want to know how to connect an external monitor. my laptop equipped with a port for it, but do not seem to recognize a screen when I try

    Almost all laptops have this ability.  As a general rule, you must press the Fn key and one of the F keys to switch between the display of the computer laptop (1) use, (2) use the external screen, (3) use both.  See the User Guide for your laptop for more details.

    In addition to telling the hardware of the laptop to send a signal to the screen external, you can probably configure which displayed on the external monitor (a copy of the laptop screen) or an extension of it by right clicking on an empty area of the desktop, select properties and then click the settings tab.

    Finally, some applications (such as Powerpoint) have their own internal settings.  This is for Powerpoint 2003--> http://office.microsoft.com/en-us/powerpoint-help/presenter-view-tools-for-running-a-powerpoint-presentation-HA001056547.aspx

Maybe you are looking for

  • Satellite S1900 - need new HARD drive connector

    Hello! I have a big problem. I have my good old Toshiba Satellite S1900 but my little brother (when I in a holiday) lost my laptop HARD drive connector. Please tell me someone where I buy this connector?

  • Software with the Pavilion DV7-3190em

    Hello! Due to some problems, I had to format the entire computer and reinstall the operating system and updates. But time looking for downloads for my laptop (once again: Pavilion Dv7 - 3190em) I have not found all the software that I promised to buy

  • Damaged touch pad tablecloth on HP mini 110 4100ea, replacement for wanted

    Hello I recently let a friend try grade up to the ram on my HP Mini 110 4100ea, but in the process he damaged one of the Ribbon cables on the curcit Board strip containing the buttons touch pad specifically a conecting it to the motherboard, making i

  • y at - it a detailed explanation of the advanced options?

    I was wondering if there is a document that details the options advanced.  The default values are selected to reject, refuse, drop.  However, if the user is not located and select continue instead to reject, what is the next step in authentication. H

  • Media Center does not support the digital TV Tuners to the Canada, only US places why

    Is there a reason why Wondows 7 Premium Home Media Center isn't support / detect my digital TV tuner when the location is set to the Canada? Only the ANALOG tuner is detected. I have ATI TV Wonder HD 750 PCI-E installed I am living in Calgary, Albert