On the 10.2 version my wallpaper shows on all websites in up and down

Similar Questions

• the new beta version that tries to be eliminated, everything is there and does not end when I aggree to install it. I'm on a Mac with OSX 10.9.3.

  the new beta version that tries to be eliminated, everything is there and does not end when I aggree to install it. I'm on a Mac with OSX 10.9.3.

  HI sselden,.
  Thank you for your question. Currently the version that you are on the old version. The current version is 29 and the beta version is 30.

  I recommend you to install a new beta version or the more up-to-date. http://www.Mozilla.org/en-us/Firefox/channel/

• My firefox does not work llook like the most recent version. I downloaded it on my aunts comp and in the corner upper lft, there's a firefox orange box but still just mine has firefox symbol.

  I had firefox for over a year and I recently installed on my computer of aunts. When I've done in the upper left corner, there was an orange box that says firefox on it. I have recently installed on my computer and it's always the same, as I had before. (Just the symbol of firefox) How can I get the latest version? It does not say I have the 6.2 or what is the most recent. Thank you in advance for the quick response to my question.

                                      Amy Vitko
  

  The current stable version is Firefox 6. 0.2

  https://support.Mozilla.com/en-us/KB/how-do-i-get-Firefox-button
  Why can't I see it?

  To make Firefox look like other programs in Windows XP, the menu bar is displayed instead of the Firefox button, while under Windows Vista and Windows 7, the button is displayed by default in Firefox.

• When I plug the headphone in front back, it shows me all the time "line in"

  .. and manually I put on headphones and then I hear of helmet, after computer to start again I have to do the same thing and here again I can hear the voice of helmet,

  I have separate headset, mic is good and shows jack rear panel but helmet appears and when I plug it into the back of the helmet, it shows online and I don't hear voices, so I manually check the headset option each time you start...

  PL. Help me

  Hello

  I suggest to set of speakers as default device and plug the headset, when you want to listen to music through headphones and connect the speakers when you listen through loudspeakers.

• I downloaded Acrobat XI to reinstall on the PC but version does not use English even if selected English and cannot run.

  I need complete a clean install of Windows 7 P to remove the impossible 10 Windows on my PC.  Went to the Adobe site, signed on my account and downloaded the program Adobe Acrobat XI.  I chose English as the language and directed the program after having extracted the downloaded software.  He installed with English but when I first open the program, it is not in English but some Eastern European language and I can't make it work.  Any suggestions on what to do to make this work?  Thank you.

  Thanks for the helpful tips.  I finally realized that the product key was not good but an earlier version of Adobe Acrobat.  Once I entered the most recent issue, I got the English version.  The old number is required to confirm an update.  I found my old email from 2009 that gave the correct product key.  Problem solved.

• Not sure on the pug-in version, why he showed not "the right version"... and some photos models are not in my version of Photoshop...

  After that I consult with Photoshop Online Chat a few days ago, on the problem of legal code, then it works. but then I use it, according to some teaching books, I discovered that there are some 'photos of model' missing, not as much as books.

  What could I do? Renew the plug-in?

  It depends on what version of photoshop is using the book, but you can find templates more if you click the menu drop-down and click on Preset Manager.

  Then in the Preset Manager, select models, click on the dropdown menu, select game and press done.

  In the Model dialog box click on the bullet of gradient and click on model chip to get the updated models.

  

  With other things like editing > complete. layer styles and model fill adjustment layer, you just need to use the drop-down list of templates.

  I have no why with the shape tools, model sets are not on the list of the menu drop down.

• New BIOS Z360 - but where is the 64 bit version?

  Hello!

  Lenovo released a few days ago a new BIOS for the Z360. It says in the manual 'for the Windows operating system, there are two packages of updates. The first is for 32-bit versions of Windows and the second for 64-bitWhere is the 64-bit version?

  I searched all over the Internet for it and I can't find a thing. Please can someone help me, I don't want to reinstall the whole system, because I have a 64-bit OS

  welcomes Frank

  http://consumersupport.Lenovo.com/se/en/DriversDownloads/drivers_show_4251.html

• How will I know if I am using the 64 bit version

  Hi, how can I know if I use the 64-bit version of Lightroom 6

  richardp46067423 wrote:

  Hi, how can I know if I use the 64-bit version of Lightroom 6

  All 6 of Lightroom are 64-bit. There is no other kind.

• Is firefox are affected by the last update of windows 10 - since update firefox slow/no answering and asking to be closed - ARRGH microsoft

  Why is it every time there is an upgrade microsift everything seems to get mucked up - you could almost imagine it is programmed in so regular is the problem - because the free upgrade windows 10 seems to be problems... Guard clamp upwards mozilla responds don't not etc - someone at - it ideas?

  Support for Windows 10 of Firefox will be more fully realized version 40 this is the 39 version.

  40 Firefox will not be finalised for a few weeks, but if you are already running Windows 10 maybe you're an 'early adopter' and he won't mind using a beta-test version.

  First of all, I suggest you a backup of your file of main parameters (profile). This article has tips on it: back up and restore the information contained in the profiles of Firefox.

  Then the beta version is available on the next page (scroll down to your preferred language): https://www.mozilla.org/firefox/beta/all/

  In case you're wondering, the traditional criterion of the 32-bit version will take care of all of your regular plugins; the version 64-bit test barely has plug-ins available and perhaps a few other work through compatibility issues.

• on the technical task, my cpu is still 100% (without opening 1 program) and I can't do anything... virus?

  at one point, my computer started acting funny.  for example, he would play trailers (just sounds or non-video) without open programs.  checking task Mgr and also programs that are currently running, but trailer not played! strange.  now, when I turn on my computer, it is extremely slow, if not completely frozen.  I check the task mgr and it says CPU = 100% without doing me anything.  I have nearly 60 applications that run, but have no idea which are needed.  Help, please

  If you think you have cleaned up a bit - he envisions is Windows XP...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do some cleaning and dusting off this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your WIndows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

  If you eventually want to install properly - you will need the installation media (or some way to restore the system to factory settings) and numbers of the product key partner/serial for Windows XP and all of your software installed individually.  You should have backups of things important to you - such as photos, music, documents, favorites/bookmarks Internet, emails, etc and so forth before you consider even to do something like that.

• How can I fix the Player Plugin update? Whenever I click on the box to update and download the version, it still shows a red box in front of by update

  I'm trying to update a Plugin. When I click on the red box the Player Plugin, this brings me to the Adobe site in order to choose the version, language and operating system. I do and download version. It shows the version already installed. When I go back to check and see if the Adobe Reader Plugin has been updated, there are always the red box to the right, saying: it should be updated. I refreshed Firefox and that did not solve the problem. What can I do to update this Plugin?

  Is a situation like this, go to the web site of programs and check there.
  If the site says you have existing programs, that's all you need.

• Firefox 24 says Java and VLC should be updated, but they show that they are the most recent versions. How to eliminate the designation wrong update?

  I checked the updates of plugins Firefox 24 and it showed that I needed to update Java and VLC media player even though I knew I had the latest versions. I ran FF update for both links and rebooted but still said that both need to update after a new analysis. I uninstalled both programs then re-installed the latest versions. FF always says I have v2.06 VLC and I 'vulnerable' but the VLC software shows that I have v2.08 which is the last. Java is now properly recognized and are more marked as in need of update. How can I get FF to recognize that I have the latest version of VLC? Thank you.

  I know that VLC has a problem that they don't update their file serving the Firefox plugin, and I'm not sure Java but you can check the licensing of Java on trusted sites.

• Version non-retine showing on the retina of the Mac with the latest version of Skype

  Version non-retine showing on the retina of the Mac with the latest version of Skype

  

  Who did it! Thank you very much!

  Any ideas on how that could have been triggered?

• Show only the screws used to VI hierarchy instead of all polymorphic Versions of a VI

  Hello!

  When you pull the top of the hierarchy of VI for a program, you get a diagram showing all polymorphic versions of a VI used in your program (at least I do).  Is a checkbox hide somewhere that I did not find that put the screws in the hierarchy I call in my program?  For example, if I use the polymorphic VI 'DAQmx create Virtual Channel' in my program, and the "AI Input" version is used, I always get every version, which is several, figure in the hierarchy of VI.  This clutters the schema a bit.  Instead of an icon that appears in the hierarchy, it is instead of 20 or 30.

  Everyone there knows what can be done?  Thanks for any help you can give me.

  Thank you, Jeff, to confirm this as I was afraid of.  I was wondering where they were hiding this darn box!

  I guess that the code that creates the diagram hierarchy VI must have been written before polymorphic VIs and he travels find as all loaded screws to add them to the diagram.  When any one version of a polymorphic VI is called, all versions are loaded and found the code that creates the schema.  If only the specific version of a polymorphic VI takes over, then this theory does not work.

  If I helped you and I get this feature implemented, I am glad that I could be useful.

  I appreciate your response.

• I am a new user. The trial version ch & LR have been donloaded 2 fair days and he was attuned to the monthly plan. However, when open the LR, there all the same show PS with one day left and trial version with 29 days. Please please advise and would l

  I am a new user. The trial version ch & LR were uploaded 2 days ago and just joined the monthly plan. However, when open the LR, there all the same show PS with one day left and trial version with 29 days. Please please Advisor and would like to know if other apps like bridge etc. are included in the plan. Thank you very much.

  Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?