On the computer user's manual

Similar Questions

• How do I script in DIAdem to include specific lines of code (similar to .ini in LabVIEW files) based on the computer/user?

  I took Basic training courses so DIAdem Advanced and have been scripting for several months.  I am interested in how to include specific lines of code based on the computer.  Told me it would be similar to .ini in LabVIEW files, although I've never used myself .ini files.

  Hi Karen,.

  What do you mean by "includes the lines of code?  Do you mean what happens when you run a command 'ScriptInclude()' or 'ScriptCmdAdd()' in a tiara VBScript?  Or do you mean that you want to run several lines as DIAdem begins, similar to 'ScriptStart() '?

  What do you mean by "computer-based?  Do you mean you want to implement different batch files on different computers, but you are still using the same file (named) command on each target computer?  Or do you mean that you want to implement the same command on all target computers file, but you want different commands to run this file based on the computer on which you are.  In the latter case, how do you determine computer on which you are on - MAC address, logged in user name, or what?

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• I have a problem with a missing on the computer user account.

  Original title: problem getting back to the original account admin user

  Since the computer was new, I didn't have that one user account and didn't need a user to logon screen, when it opened to that and the only active user account. Fast forward 6 months that I had a problem with a windows installation file deleted and in order to get a program running I had to add a user account for the new installation of the user files. That part worked, but when I disconnected and tried to return to my original owner account there was only the new account on the logon screen my original account wasn't there. My files for this user account are still there in C: User but I can't find a way to get there.

  Googleing this problem I saw things about problems with the accounts being listed as AccueilCompte, or administrator, but it did get me anywhere, the only difference I've seen after going through all that I saw in Win7 Home Premium, which had to do with user accounts, it is that my original account was registered in a field as 'owner '. I don't know if it's part of the problem or not. How can I return to my original account and why isn't she appear on the opening screen of session or user accounts?

  Hello

  Welcome to the Microsoft Community and thanks for posting the question. I see that you have a problem with a user account.  Let me help you with the issue.

  1. What is the brand and model of the computer?

  2. what security software is installed?

  3. have you logged as administrator?

  To resolve this issue, let us try these methods:

  Method 1.

  You can transfer the files from the user account of old or damaged to the new user account by using the article "difficulty a user profile is corrupted.

  Difficulty a user profile is corrupted: http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Method 2.

  You can also check out this link for more information: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/how-do-i-transfer-files-from-the-original-user-to/20c78000-f1e2-4060-b02c-6f23fbbf270e

  I hope this helps. If you need further assistance on this particular issue or any other related issue Windows let us know and we will be happy to help you.

  Thank you.

• How can I remove the "Noge" of the computer user?

  Original title: Noge user

  Hello

  My computer is controlled by a user called "Noge", and makes me print documents that are not mine. The folder of the user is always placed in the folder users on the C:\ drive and it cannot be deleted. When I print a document the computer also prints the copy of the document called a new Microsoft Office Word Document created under the folder of Noge in disk C.

  Can someone help me? This is the second time my own Launcher Progam Windows detects the problem, which means a virus or a person who is called Noge is controlling my system. I created this tool to be used to luanch most of the Windows administrative tools primarily by system administrators.

  Please help me soon on Noge.

  OK, here is what your report tells me:

  • Logged in under your own account (A.B.)
  • Your profile folder is C:\Users\A.B.
  • You finally connected to 16:24
  • Your account is an administrator account.
  • Noge user finally connected at 16:14
  • His account is an administrator account.

  The strange thing is that the password for the account of Noge was exactly as the opening of session took place, in the second. This suggests that the account is used by an automatic process. If it is legitimate or not, I can't say. I now do this:
  1. Create a Windows restore point.
  2. Burn a CD of Windows repair.
  3. Use the CD to repair to start the machine in Repair Mode, then check whether you can see the Windows restore point, you created in step 1.
  4. Click the start planet.
  5. Type the three letters cmd into the search box.
  6. Press Ctrl + Shift + Enter
  7. Click on "Run as Administrator".
  8. Type the following commands and press ENTER after each:
     NET user Noge / active: No.
     (to disable the account of Noge)
     NET user Noge
     (to check if the account is disabled really)
  9. Reboot the computer.
  10. Re-issue the net use Noge command to make sure that the account is always disabled.
  11. Repeat step 10 at regular intervals.
  12. Communicate the results here.

  If step 8 has the unexpected side effect of making bootable machine then you can use step 3 to restore it to its previous state.

  Note: steps 1-3 are important!
  Also note that running a machine with one admin account is a way very risky to do things. If you have only one small problem with this account, you will be in diabolical trouble.

• I would like to get the name of the computer user. Is this possible?

  Hi guys!

  Is there a function I can to get the user name of the computer that is using the / open my form?

  
  I would like to surprise the user, praising your name on the form

  Thank you!

  Hi Rafael,.

  It can be done, but you have to work within the security of Adobe strategy. It is considered a security risk for the form to use the script to collect information about the user of the computer. You will need to use a function of trust, which is in a JavaScript (.js file) file. This .js file is then placed in a specific folder on each computer using the form.

  See a thread and examples here: Re: Dungeon user to print and see some pages

  This can be very difficult to maintain, and you will encounter problems if the form is activated in Acrobat Reader.

  Overall, it is possible, but it is a pain and if you form are intended to be used on several computers (outside), then it is probably not worth the effort.

  Good luck

  Niall

  Ensure the dynamics

• Analysis of chain for the computer user name

  
  

  Hello

  We discussed on the phone, but I will post the solution so that others are aware of the solution. You wanted to check if the current user of the system (XP or Windows 7) a known username so we worked upward a quick VI

  

  Kind regards

• Remove old settings of the computer user account

  From: ericf10

  I've changed the original administrator user account.  However, there are always references to a command line, some files and the old username remote desktop.  I've already changed the registered owner in the registry in HKLM\Software\Microsoft\Windows NT\Current Version\RegisteredOwner change.

  What else should I do to get rid of this former user?

  From: Brink

  Hello Eric,

  What you see is the reference in the 'C:\Users\user name' folder. While you can change the registered owner and the name of the user account, you cannot change the name of the folder 'C:\Users\user name'. The only way to do it is to create a new admin account and delete the one within another.

  Hope this helps,

  Shawn

  Another response of the community of Windows Vista discussion groups

• When I start the computer. Initially, it shows a dialog box to enter my system or the administrative password. but does not the password...

  When I press F2 or F12 =, same thing. Help me! I m stuck

  As JoeWilliams56 says, it's a BIOS password. To reset the password, you can either remove the battery CMOS for quite awhile, say a minute or two (make sure that the main power is off during this period).

  In addition, most desktop computers have Cap BIOS reset setting on the motherboard. Definition the CAP to restore mode clears the BIOS and the password is removed. In laptops, the CAP is absent; Instead, jumper PIN must be bypassed manually. For this step, see the computer user/service manual.

• I deleted my phone after the backup of photos were also deleted from the computer and iCloud

  I have an iPhone 5 and after upgrading my phone and transfer pictures, my computer screen went to sleep while he was removing all transferred photos off my phone as I walked away. When I went back and opens the screen, deleting was stopped, and even if I tried to have the iPhoto to delete 517 photos that were transferred, it would not be. So, while my phone was still connected to the computer, I scored manually 88 photos on my phone, following on the computer, ensuring that each photo that I retreat the phone had been transferred to iPhoto. Then, I went in the "recently deleted" on my phone and deleted those as well, so they do not take place. When I got back to the computer for the next round, I realized every photo that I had just deleted my phone also disappeared from iPhoto! I even checked iCloud and they weren't there. How can I recover these 88 pictures I deleted from my phone and why the hell did remove it from the computer?

  Any help would be appreciated. Thank you!

  Note: My operating system is OS X El Capitan 10.11.3 / / iOS on my iphone version 9.2.1

  iPhoto or the new Photos application on your computer?

  Note that if you have settings > iCloud > iCloud library enabled in your phone and if you have the menu Apple > System Preferences > iCloud > Photos - Options > iCloud library enabled in your Mac, all the photos you delete phone, the Mac, or directly on iCloud will be removed from all 3 places. Intend to iCloud photo library must synchronize all your pictures on all your devices and iCloud. More information on iCloud Photo library FAQ - Apple Support

• Can the License Manager load the computer license first, instead of the license based on users?

  We have several machines in the lab with licenses computerized on them and a number of technicians who have licenses based on users. When he signed from time to time as themselves, instead of the generic service account, a technician of the License Manager fits on the machine their user account. Not a problem until they're trying to connect to their own PC again LabVIEW and they get the trial of 14 days notice period.

  Is there a way the License Manager looking for the license to the computer first instead of the user license?

  Thanks for any help.

  Joe

  Hey Joe,

  In the license file on the license server, you may be able to manually change the tag "sort" in the file to change the order in which VLM withdraws licenses. Licenses are checked in descending (2, then 3, then 4, etc.). As a general rule, your license file is set up in a default order, but in special cases like this, it may be advantageous to change the order. To do this, follow these steps:

  1. open the license file with a text editor (such as Notepad)

  2. search for the tag "flows out". For example, the entry "VLM_Core" will sort tag value will appear as "sort = first". Do not change this value. VLM_Core must always be the first.

  3. change the value of sorting tag for the license to the computer named to a value less than the value of sorting tag for the named user license. (for example 'sort = 2"for named computer and 'sort = 3" to the named user).

  4 save the file and reinstall the license.

  Let me know if you have any questions!

• How to hide my wireless connection personal House of the user of the computer on the outside

  I see from time to time by my window a vehicle that is parked outside using their computer. Someone told me that they can connect to the internet using my wireless signal. How can I hide the outside user I have a wireless connection?

  Hello Maria,.

  There are a few things you can do to make sure that you are safe.

  #1. Make sure that your wireless modem is protected using a personal code to access WEP or WPA2. This is done by going to the configuration of your modem and the establishment under the wireless tab / link / article. Of the modem user manual must be able to guide them in this process.

  #2. The other way is to disable the broadcasting network option in the modem. The only problem with this option, it is only people who are currently using the network can get on again.

  I recommend establishing a password on your wireless network and in this way people can see your broadcast network, but they will not be able to get on it, unless they have the password.

  Hope this helps,

  JB

• Search bar on the Macbook Air doesn't work, will allow me to load the pages of Favorites and links to these pages, but not let me google from the bar or manually enter Web sites, however, it works perfectly on the guest user

  Search bar on the Macbook Air doesn't work, will allow me to load the pages of Favorites and links to these pages, but not let me google from the bar or manually enter Web sites, however, it works perfectly fine on the guest user. Have you tried restarting and it still does not work.

  The problem should be solved now.

  Otherwise:

  OS X

  iOS

  Workaround for problems with the Safari address bar

  http://osxdaily.com/2016/01/05/fix-Safari-freezing-address-bar-use/

• window of 2008: ' I can't open Group Policy Management "group policy to manage, you must log on to the computer with a domain user account.

  Hi, please advise, I can't open Group on win Server 2008 policy management, it is said
  "To manage Group Policy, you must log on to the computer with a domain user account.

  Hi Cucu KurniaPutra,

  Thanks for asking this question to Microsoft Community!

  The problem occurs in Windows Server 2008 Network, please post your request on the Microsoft TechNet forums to get help.

  
  Here is the link:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• Scanner does not work for all users on the computer Windows 7

  Photosmart 7510 Scanner does not work.  My scanner has the habit of work.   Now it does not for one of the three users on my Windows 7 desktop.

  I spent over 3 hours on the phone with HP.   They had me restart the computer, Plug and unplug the printer, reinstall the software twice under different names. The software depending on what user id, it is installed under allows access to the scanner/printer to one or more users.  The scanner works with Windows Paint software for all three nicknames.

  HP response is that some user control prevents the scanner software, who used to work on all three nicknames on the computer, which now works on one or more of the users.  They couldn't tell me which user control need changing.

  The HP solution is to restore my system when I could scan for all users of three.   I don't want to do that.   Does anyone have a better solution?

  The real problem is HP error messages.   When I click on scan a document, there is no answer.  Nothing happened.

  Then I tried to scan using Windows Fax and Scan.   I got an error message which helped me locate the source of the error.   I was able to fix the problem without creating a new user account.  I had deleted bu error the file MY Document.   Restore this file fixes the problem.

• After the normal closure of windows XP the computer displeys message: now is the computer (requires manual deactivation)

  After normal closing of Windows XP, the computer displeys message: now is to turn off the computer. It requires manual deactivation. Beginning is normal.
  VD

  http://support.Microsoft.com/kb/810903