on the improvement of the window

Similar Questions

• 10 improvement of the Windows path hangs on "place the external storage and press OK.

  Hello

  This will be my first post on this forum.

  A couple of weeks ago, I bought a Toshiba SATELLITE CL10-B-103 for my son. The CL10-B-103 has installed Windows 8.1. Tonight I plan to make the installation of the Windows 10 upgrade because Windows 8.1 announced that he was ready for the upgrade.

  The trial progressed slowly but smooth and without problems until now... As the laptop is equipped with only an HD 32 GB the trial upgrade was informed that I had to stick a USB key. After that, the trial continues slowly but smoothly, but who did not question because I had all night. However after the first reboot of the system when he was about 60 or 66% of installation of process this error message showed: place the external storage and press OK. It's very strange since the key USB has been removed at all and was still in the system. It is strange, is that both the OK button as the Cancel button are not selectable. Without passing by the touchpad, not a tab or an entry.

  Some community online Windows 10 post mentions that, via the BIOS, the system must be initiated from this USB key. I tried to reboot the system with DEL, F2 or F8, but I couldn't get into the BIOS and wasn't able to change the boot sequence.

  After each "restart" the same error message appears. It does not matter that the USB is in it or not.

  So, my conclusion is that my CL10-B-103 is suspended/East in a loop. I don't know how to proceed.

  Please, I can really use some help.

  Thanks in advance.

  Because it seems that I can not only edit/change a message I am answering my own post now...

  The problem seems to be resolved. When I was able to use the touchpad I could push the OK butten and the upgrade product now.

• The windows are constantly flashing and goes black. I'm almost ready to go back to IE.

  The interface is slow accepting typing. Menu drop down windows go black and I have to point them to see the content sometimes, I take the bad selectiondue for the flashing window and shift in time

  Hello

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Open the Firefox Options (Preferences on Mac or Linux) as follows:
     • In Firefox 29,0 and above, click on the menu button

       

       then select Options Preferences on Mac or Linux, or Windows.

     • In 28.0 Firefox and earlier versions, click on the Firefox orange upper-left button, then select the 'Options' button or, if there is no button up Firefox, go to tools > Options.
  2. In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
  3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  4. Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• Bookmark drop downs that go outside the window of Firefox are left on the desk bookmarks closing requiring a refresh to clean

  If I open bookmarks and select a folder which is longer than the window of Firefox is high, the part of the list of bookmarks that falls outside the window remains on the desktop when I leave bookmarks or close the window. I then do a refresh of the desktop to get rid of the junk. Doesn't happen with IE9 MS. I use Windows 7 Home Premium on a SONY VAIO laptop. All started when I went to the VAIO in last November. A 'Show Desktop' or a refresh of the office cleaning.

  Could you try to disable graphics hardware acceleration? As this feature has been added to Firefox, it has gradually improved, but there are still some problems with some drivers/graphics cards.

  You need to restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Orange Firefox button or classic menu Tools > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  If you restart Firefox, the problem is solved?

• Small chip to the bookmarks bar remains on the right side of the window

  11 Firefox, Windows 7 64 bit. If I click on the arrow to reveal hidden in my toolbar bookmarks, click on a bookmark, a small slice of the toolbar remains on the right side of the window open. Sometimes, if I view bookmarks hidden and then move the window open, the toolbar "disconnects" the open window.

  Could you try to disable graphics hardware acceleration? As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Orange Firefox button or classic menu Tools > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

• In the window below the toolbar in Firefox, I can't click on the links in the upper part of the window, that is to say the cursor does not change in the hand icon and the link is not highlighted.

  The toolbar and the lower part of the window works normally, like the window of Internet Explorer.
  I reinstalled Firefox with no improvement.

  Recently, the Yahoo toolbar and the extension of Babylon have been reported because of this problem. They appear to overlap invisibly on the top of the display of the web page. If you have either or both, uninstall them / it, or see if an update is available that solves the problem.

  • See-> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
  • See-> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
  • See-> http://kb.mozillazine.org/Uninstalling_toolbars

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Implementation OS10.9 to open the windows in the finder on reboot?

  Hi all. MacPro mid-2010 model, OS 10.9.5, 16 gig RAM...

  You know, it seems that whenever Apple highlights its new version, it boasts all the features of "new and improved" she brings with her.

  What they don't tell you is what they forgot to put back!

  For example, this. On my MacPro at home (a 1.1 model), I run the Sara snow (10.6.8). I have my new iMac ElCapitan 10.11 (! its majestic).

  BOTH computers will be re-opened windows of the finder that were open when I restart.

  However, the computer at work, the model 2010 supra with Yosemite, did not and it's important, because I have to open then manually 6 finder Windows I keep it open at any time while I'm working (if you want to know why, I can ' splain to you..)

  Yes, my question: is their a display Option or the Finder prefs somewhere which will open the windows in the Finder for me when you restart?

  I do not think that is cared for and for what it's worth I agree, that would be helpful. You can suggest it is in www.Apple.com/feedback.

• I need to restart the windows assessment services service to connect to localhost, whenever I start the client WAS

  A / installation ADK

  I need to restart the windows assessment services service to connect to localhost, whenever I start the client WAS

  Hello

  To improve assistance to this subject, you can ask your question in the technet forums.

  http://social.technet.Microsoft.com/forums/en-us/categories/

• run a while loop in separate vi, minimize the window flashing

  My apologies in advance for not including a VI; I cannot give it, cannot even provide screenshots.

  I have a state machine base with a cluster of Boolean values that are analyzed in the 'default' State, the scan index = true determining the next State. All other States to return to the default state. The State of 'stop' stop the loop with a Boolean constant = True, located inside the structure case wired to the time entry conditional loop (all States have a Boolean constant False wired to it). Apart from the cases

  statement, the wire connected to the conditional entry is connected to a Boolean indicator, ' Stop, in really. The time delay within the State of the machine while loop is currently set at 100 ms.

  In addition to the 'State' shift register, the state machine has a "boolean" shift register. All States, except one, feeds the value passed the Boolean value through to the next State (i.e. wired directly from left to right the structure of the case). The exception is the State which inverts the Boolean value, with the output of the inverter transferred to the State following and also connected to a Boolean flag, 'Show the State', the

  indicator outside the case statement but inside the while loop. All other States wire just the previous state of the Boolean value through the following State, unchanged.

  In addition to the State of the machine while loop, I have a parallel while loop (scourge of the LV forums). All entered conditional loop is connected to a local variable to 'stop, really. " A True/False case in this while loop structure contains a Subvi in the case of True value. The Boolean value of entry to the case statement is connected to a local variable for 'Show status'. The Subvi, which is in the real case is to display the State of the

  user.

  The Subvi which provides status through its frontage runs a script in python via a 'comand prompt"vi. The necessary update to the python command send is ~ 1/second. Within the Sub - VI is a 1 second delay time after execution of the code.

  It works but I'm doing some improvements with minimal impact on what I have.

  Two cases of VI properties that relate to the conduct of the State Subvi (floating or default, modal does not at all):

  1. with "Firm when previously closed" selected, the window switches VI (via the main switch VI) open and closed but when it is open there is the a second window flash that could cause seizures in some users.

  2. with "closes when previously closed" deselected, the window remains open and it is difficult to tell the difference between the running state and is not running. In addition, the Subvi window will not be reduced for this option.

  Is there a little invasive change, I have the code in force to stop a second flash described in #1 above and activate / deactivate the Subvi status window?

  Thank you

  Jeff

  
  

• How can I display the menu bar in the window choose

  How can I view in the menu bar in the window of flight selec t

  Hello

  1. are you referring to Microsoft Flight Simulator or Microsoft Flight?

  If you have a problem with Microsoft Flight, then I suggest you to get in touch with Flight support to improve assistance on the issue:

  https://microsoftflight.com/en-us/support/

  For Microsoft Flight Simulator then contact from this link below: http://www.microsoft.com/Products/Games/FSInsider/tips/Pages/ContactingTechnicalSupport.aspx

  Hope this information is useful.

• Since installing additional RAM memory, I see "No Signal" instead of the Windows Welcome screen.

  Original title: I improve my pc it produces a problem.

  Hey,.
  I have a problem
  I update my ram 1 GB (512MB 512 MB) ram of 2 GB
  After that when I start my pc after the window logo page it show no signal (at the place of the Home Page).

  How I solve this problem?

  Problem solved
  It was ram problem and now I add new ram.
  And the Pc works correctly

• How can I use windows 7 themes in windows XP OS to give me the windows 7 feeling

  I like windows 7 feeling that is available to windows and partial transparency in the title bar.

  I wish if this feature would be available for XP users for a better experience.
  It could redefine the looks of the XP theme.

  Aero is not just the cursor being different, it encompasses all the Visual effects in Windows 7.
  As the transparency of the windows, move the mouse over a program in the task bar and see an overview of this program, be able to shake a window and all other windows are minimized, pressing the key windows + tab to switch programs, etc.

  All that Microsoft could do to "improve the customer experience" would happen when XP was the last operating system on. Any changes to the XP now would be updated for security or patches, as XP reaches the end of its support.

• Can not turn on the filtering of the Web on the Windows family safety

  I am changing the Windows family safety web filtering and it won't let me.

  Hi peterhastieZB,
   
  As the query you posted is related to parental control, post your query in the Portal Windows Live Family Safety to improve guidance to this topic.

• Question on the Windows Media Player privacy setting

  I've been using Windows media player for almost a decade, like many other people, but I never really paid attention to all those defining what affects privacy in WMP.  Now, I have a few questions about these privacy setting.

  I read in the windows Help article, if I check on "update my music files by retrieving the news media of the internet " in the Privacy tab on the Options in Windows Media Player dialog box, it is said that ' indicates if the player will automatically obtain and update missing media information for music files in your library. If the information is available. If this check box is selected, the Player tries to update any missing media information in the files by sending data about them to a database of Windows Media. "

  Here is a link to the page that explains more about the configuration of the protection of personal information in WMP11.

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/Windows-Media-Player/11/privacy-statement?locale=409&geoid=F4&version=11.0.5721.5280&UserLocale=409#section_6

  My question is that if I turn the setting (which was on), this means that my music in my library files are sent on a windows media database?  or just a piece of information about the file are sent to them?

  Let's say I have a family video that I created with my own camera in AVI file format and it ' in my library.  If the setting I mentioned above is enabled, the video files are also sent to the database of windows media, or somewhere?   There is nothing to hide, but I really don't want my own private music which will be sent to anywhere else on my computer that's why I really want to know what kind of data or information about the file are sent to the windows media database to retrieve information from the media.

  also what about the customer experience improvement program in the drive configuration? ("I want to help makeMicrosoft software and services even better by sending Player to check data use versMicrosoft" on the Privacy tab on the dialog option in the player)  I did not know until now, but the setting has been activated on my player... If it's on, my personal files in my library are sent to Microsoft? According to the article, I've read it doesn't seem like it, but I don't know and want to make sure.

  I'm sorry for the long long entry... but if anyone can help me with the answer, I would really really appreciate it!

  Thank you very much

  As for the 1st setting, audio/video files certainly is not sent to Microsoft (which would require anyway a lot too much bandwidth). WMP only sends the metadata, such as title, artist, length etc.

  On the 2nd parameter, the privacy statement for the Customer Experience Improvement Program is at http://www.microsoft.com/products/ceip/EN-US/privacypolicy.mspx . After that, no personal file will be sent (I don't see how those that might be useful to Microsoft). If you are still not sure, you can always disable this setting without side effects.

  Tim Baets
  http://www.BM-productions.TK

• I need to know how to enable the windows update service

  My PC has windows automatic update service disabled and I need to update my Vista Home premium but I can't because the error that I get when I try to activate updates, it's "the service does not work.

  So that Windows install important updates as they are available, turn on automatic updating. Important updates provide significant benefits, such as improved security and reliability. You can also set Windows to automatically install recommended updates, which can address non-critical problems and help enhance your computing experience. Optional updates are not downloaded or installed automatically. To learn more about the types of updates that Microsoft publishes, see this Knowledge Base article on the Web Microsoft Help and Support site.

  1. Open Windows Update by clicking on the button start , clicking all programs, and then click Windows Update.

  2. In the left pane, click on change settings.

  3. Choose the option you want.

  4. Under recommended updates, select the include updates in downloading, installing or informs me of the box updated recommended, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  If this isn't what you mean, then maybe see this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Vista-error-Windows-Update-service-is-not-running/ea17bdc9-125E-4130-A099-af547130d313

  or

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058