On the use of Find... (loss of functionality, perhaps?)

Similar Questions

• loss of function of the keyboard and the touchpad

  I am a rural small repair shop and received a HP/Compaq Presario CQ60-615DX to repair the loss of function of the keyboard and the touchpad. My first thought was that the Ribbon connectors came loose. However, when I first turned it on, the keyboard worked to enter the Windows password. Once started, the keyboard would not work. My client had a major sale/repair company and their solution was to install a keyboard on the screen and use a wireless mouse. I started my research in this tthinking of problem that perhaps it was caused by malicious software. Fortunately my client gave me the AC adapter while I was looking for input on the laptop voltage. It wasn't on the outer label, so I removed the battery. I reinstalled the battery and was amazed to find that both keynoard and touchpad work now.

  What could have caused this loss of function and why would be to remove and reinstall the battery solve this problem?

  It's probably that the battery actually acted as a hard reset.  A hard reset has the effect to remove remaining current EEPROM and other devices on the motherboard.

  Best regards

  ERICO

• How to use the node to call a library function to convert C++ source codes

  Hi all

  There are two dll name 'QMSL_WLAN_Transport.dll' and 'QCAMSL_MSVC10R.dll' and some codes c ++ to connect to the DUT. The two DLLs work together for communicaite with the DUT.

  I am confused as how to use the node to call a library function to load the 'QCAMSL_MSVC10R.dll' function as

  g_hResourceContext = QLIB_ConnectServer_UserDefinedTransport((HANDLE) USER_HANDLE,
  UserDefinedSend,
  UserDefinedReceive,
  UserDefinedFlushTxRx,
  true,
  true);
  

  It seems that 'UserDefinedReceive, UserDefinedSend, UserDefinedFlushTxRx' Processaddress?  And "UserDefinedReceive, UserDefinedSend, UserDefinedFlushTxRx"'s functions in 'QMSL_WLAN_Transport.dll '.

  UserDefinedReceive = (_UserDefinedReceive)GetProcAddress(hUDT,"UserDefinedReceive");
  UserDefinedSend = (_UserDefinedSend)GetProcAddress(hUDT,"UserDefinedSend");
  UserDefinedFlushTxRx = (_UserDefinedFlushTxRx)GetProcAddress(hUDT,"UserDefinedFlushTxRx");
  

  Attached DLLs and C++ code snippets.

  Need help.

  Thank you.

  These parameters are reminders - pointers to functions that are called by the DLL - and there is no way to duplicate this purely in LabVIEW. Search this forum for the word "recall" and you will find similar questions (for other DLLs). You will need to write your own DLL (in C, C++, etc.) that implements these functions and provides a way to transfer data to LabVIEW.

• Cannot use windows backup error: 0 x 80070002 the system cannot find the file specified

  Original title: Backup failed, error code but no NVIDIA chipset

  Whenever I try to use the Windows backup utility, I get a failure with the error code 0 x 80070002 and "the system cannot find the specified files" - I found KB976972, which refers to these two messages, and I have all the conditions specified here EXCEPT that I don't have an NVIDIA USB Enhanced Host controller Interface (EHCI) chipset.   I advanced and tried the hotfix download referred to in article, but he wouldn't because he did not to my system.   I don't seem to find any other KB articles that are relevant.   I have a lot of space on the external hard drive that I am backup.    Would appreciate any help.

  Win7 Backup - error. (0 x 80070002) - cannot find the file specified.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/bff71aac-c78e-42bd-A959-116019c93478

  ====================================================================

  Norton Ghost version 15 - has a 30 day trial available
  http://www.Symantec.com/Norton/Ghost
  Media: CDR/RW, DVD + R/RW, Blu - Ray, USB and FireWire® devices (IEEE 1394), Iomega Zip® and Jaz® drives
  (Note: trial does not create a Bootable restore CD you will need to restore the image)
  http://www.Symantec.com/Norton/downloads/trialsoftware/register.jsp?PVID=ghost15
  User Guide: ftp://ftp.symantec.com/public/english_us_canada/products/ghost/15/manuals/ngh_15_user_guide.pdf

  Acronis True Image 2012 - has a fully functional trial version of 30 days available.
  (Note: install Acronis and then create a bootable media restoration/rescue CD before you start creating your first image backup)
  http://www.Acronis.com/homecomputing/products/
  30-day trial: http://www.acronis.com/homecomputing/products/#tryorbuy
  True Image User Guides and documentation:
  http://www.Acronis.com/support/documentation/index.html

  Ghost 15 product review
  http://www.PCWorld.com/reviews/product/384118/review/Norton_Ghost_15.html
  Ghost 15 screenshots:
  http://www.Softpedia.com/get/system/back-up-and-recovery/Symantec-Norton-Ghost.shtml

  Acronis True Image Home 2012 product review:
  http://www.whatsabyte.com/P1/ATI_2012_Review.html
  http://www.allacronis.com/Acronis-True-Image-home-review.php

  Acronis True Image Seagate Edition (drive Assistant)
  http://www.Seagate.com/www/en-us/support/downloads/DiscWizard

  Acronis True Image edition of Western Digital (WD)
  http://support.wdc.com/product/downloaddetail.asp?Swid=119&wdc_lang=en

  Also copy disc to disc with Norton Ghost
  http://Service1.Symantec.com/support/PowerQuest.nsf/docid/2004111701520562?OpenDocument&src=hot&prod=Norton+Ghost&ver=10.0&CSM=no&SEG=HHO

  Free alternatives:
  EASEUS Todo Backup Home V3
  (Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
  http://www.TODO-backup.com/products/home/free-backup-software.htm

  Untested alternatives
  Reflect disk imaging:
  http://www.Macrium.com/reflectfree.asp

  Paragon Backup & Recovery Free Edition:
  http://www.Paragon-Software.com/home/DB-Express/download.htm

  J W Stuart: http://www.pagestart.com

• Where can I find the definition of 'synchronize' Cloud-creative function in Photoshop

  How access/activate the sync settings to Cloud-creative function in Photoshop?

  I have the Swedish version of membership cloud creative Photoshop CS6 13.1.2 x 64, last update of CC, Windows.

  Instructions (http://helpx.adobe.com/se/photoshop/using/sync-settings.html) States the following:

  -----------------------------

  

  In my version, I can't find the choice of Adobe id under Edit (Redigera). There are no parameters to synchronize nowunder 'my' Edit/Settings .

  -----------------

  

  Then, how should I proceed?

  Thanks a lot for your help in advance.

  Best regards

  Cecilia

  Hi Cecilia,.

  To synchronize your settings, you must use Photoshop CC (aka Photoshop 14). You use Photoshop CS6, which is the previous version of Photoshop (version 13.1.2). You can download Photoshop CC and other applications http://creative.adobe.com/apps cloud creatives

• Using the label for datagrid created dynamically function

  I am creating a data grid dynamically based on the data returned by a script from the server call.
  
  I know that some of my data will be nested so I need to use a label function to check that these data are displayed in the datagrid control
  
  All of the examples of the use of a label function that I can find seem to have hard coded as in the following example columns
  
  < mx:columns >
  < mx:DataGridColumn headerText = "Name" dataField = "NomMenu" / >
  < mx:DataGridColumn headerText = "Vegetarian" labelFunction = "displayVegetarian" / >
  < mx:DataGridColumn headerText = "Peanuts" labelFunction = "displayPeanuts" / >
  < mx:DataGridColumn headerText = "Quantity" labelFunction = "displayQuantity" / >
  < mx:DataGridColumn headerText = 'Price' labelFunction = "displayPrice" / >
  < mx:DataGridColumn headerText = "Total industry" labelFunction = "displayLineTotal" / >
  < / mx:columns >
  
  However, I create my columns of the DataGrid dynamically if cannot use the < medium to achieve mx:DataGridColumn
  
  My code works as follows
  
  for (var i: uint = 0; i < xlColumns.length (); i ++) {}
  
  DGC = new DataGridColumn();
  dgc.dataField = "componentScores.ScoreValue" <-THIS NEEDS to USE A LABEL FUNCTION
  dgc.headerText = _qualificationSummaryScreenData.getComponentTitle (componentIndex);
  
  }
  
  I've highlighted above where I need to use a label function. I really hope that someone can help me here that I am currently taking one step forward and two steps backward with Flex right now and already several days behind on this project.
  
  Thank you very much
  
  Paul
  
  

  I do not exactly remember the syntax, but you can assign a function to the labalFunction property:
  dgc.labelFunction = myHandlerFunction; something like that

  Have you tried that yet?

  Tracy

• How to find edited a photo folder after the use of Photos

  Hello, I'm new to using a Mac.  I uploaded the photos to Photos and then made changes to multiple images, cropping etc...  Now I can't find the image file on the hard drive after the change of the use of the Photos app, I find only the original file.  I went to the finder, then the photo file and I find the file "Library.photoslibrary photos" so I right click and select "Show package content" then I click on the master file and look for the file in a folder.  However, the file I find does not changes that I made, it is only the original file.  I'm not sure what I am doing wrong?  Thank you

  What you're doing wrong is fiddling in the Photo library package, this will lead to tears. What exactly you are trying to achieve by finding the original.

• What is the use of the description of a bookmark? Find the bookmark to Bookmark-tree? Synchronized second FavIcons divide?

  1. I'm a bit confused about the use of the descriptions of a bookmark.
  For what I use it after I filled something?
  Intend to open the booksmark property to see what I filled a long time ago?
  Maybe I could be useful to add this to the ToolTip of bookmarks?

  2. I have several bookmarks in several subfolders.
  But sometimes I can't find a bookmark. So I try to find above the bar-great and I find.
  Is it possible to see in the awesome-bar/SearchFunktionInBookmarkLibrary where I have the bookmark in my Bookmarktree?

  3. I synchronize my favorites for a second PC. Is it possible to load all the favicons this device?

  1. The description field provides additional information on a bookmark. From what I see, it is visible in the library. The field is filled in automatically when you to bookmark a page that contains a description, for example
     • http://www.w3schools.com
  2. The following modules facilitate the location of the bookmarks in the library and the sidebar.
     • https://addons.Mozilla.org/firefox/addon/show-parent-folder/
     • https://addons.Mozilla.org/firefox/addon/go-parent-folder/
     • https://addons.Mozilla.org/firefox/addon/sidebar-bookmarks-search-plus/
  3. You can try the add-on Favicon Reloader to reload site icons missing.
     • https://addons.Mozilla.org/firefox/addon/faviconreloader/

• I want to record with &lt; alt &gt; &lt; s &gt; in the Exact program online. This function does not work. This is the first time I use this program with firefox.

  Question
  I want to record with < alt > < s > in the Exact program online. This function does not work. This is the first time I use this program with firefox.

  edit, escaped mod < s > in order to avoid the line through question

  A web page can be defined a "accesskey" for an item. Unlike IE/Chrome/Safari, who use the Alt key only, Firefox requires pressing Alt and Shift to activate the element. In other words, try

  ALT + SHIFT + S

  and see if it works.

  I don't know of any way to change this so that the change is not necessary. There may be an add-on?

• Just changed Safari on my imac. When you use find menu safari gave me the opportunity to "find in this page" which was an incredible aid during a search. Is it possible to have this feature using firefox?

  Just changed Safari on my imac. When you use the search menu in safari, I had the opportunity to "find in this page" which has been an incredible help while doing research and looking for specific words/phrases. Is it possible to have this feature using firefox?

  I think that Safari has the same keyboard shortcut in Firefox 'cmd + F' on a Mac or a 'Ctrl + F' on Windows.

  Look in the lower left corner to find. There are more likely to be next and previous differences in keyboard shortcuts, but continuing in the search bar at the bottom no matter what browser you use. It is an 'X' to reject the search bar. In Windows, the "Esc" key will reject the bar if you are in the search text entry box.

  Keyboard shortcuts:

  • Keyboard shortcuts | How | Help Firefox, Mozilla very limited number of shortcuts but will show correctly for your system
  • Firefox and other shortcuts of the browser (comparison chart), more substantial, but is oriented Windows users with a few guidelines for Mac and Linux users.

  Please mark "resolved" a response that will better help others with a similar problem - hope it was her.

• Loop Finder crash after upgrading to El Capitan.  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English operating system.

  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English.  The e is a compatibility issue with dropbox or Google drive in El Capitan?  Those are the plug-ins only that I could find.  Thank you very much.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Failed to retrieve the DIAdem DataFinder research data, using data-finder toolkit LabVIEW 2009

  I am facing problem to retrieve the DIAdem Datafinder data.

  At first, I developed this project in LabVIEW 2010. But because of a problem that I met in LabVIEW 2010, I thougth to work on the project in LabVIEW 2009.

  Then, I reused the project that I created using LV 2010 using option economy for the previous version.

  When I tried to retrieve the data from the tiara using data finder toolkit. I got a 305505 warning. Please see the attached message of Warninig.

  But I have not seen this warning while I was working in LabVIEW 2010 and also, I was able to get the data from the tiara.

  Please suggest me a way to solve this problem.

  Hi Nanda,
  There is a bug when using the SDK use in combination with DataFinder Toolkit 2009.
  This bug is already fixed in LabVIEW 2010 and use SDK 2010. But as you said there is another question in LabVIEW 2010, forcing you to LV 2009.
  I suggest you use LabVIEW 2009 with use SDK 2009 and DataFinder Toolkit 2009 and instead to use the "Waveform.vi results" to read the search results, I would recommend to use the screw storage. I spread your example VI and it attached to this message. You will still see the dialog box to search for "lvStorage.dll" but it will automatically disappear and the VI works anyway because in this case LabVIEW will find the dll itself.
  My extended VI uses the '_openWithRoot.vi' to open a file with a different use than CT or PDM. This VI is also described in the following knowledge base article: http://zone.ni.com/devzone/cda/epd/p/id/4181
  With LabVIEW 2010 use support has been enhanced and fully integrated in the standard palette of storage screws. So in LabVIEW 2010, you can replace the "_openWithRoot.vi" with the 'Open Data Storage.vi' standard but with LabVIEW 2010, you can also use "Waveforms.vi results" to read the search results.

  I hope this helps.

  Kind regards
  Eva

• Couldnot load file or assembly 'sorttbls.nlp' or one of its dependencies. The system cannot find the file specified using SharePoint Designer 2007

  I have a computer on my network when you open web files WSS 3 in SharePoint Designer 2007, I get the error 'could not load file or assembly 'sorttbls.nlp' or one of its dependencies. The system cannot find the specified file. "I have looked through some forms on the web and have concluded that this is a problem of .NET Framework 2, but I have not managed to solve the problem. He also seems to be keep me to load the Update Services administration console on a workstation by using MMC. Other posts on my network can open/edit SharePoint web site files in SharePoint Designer 2007 without this error and open the Administrative Update Services console withpout errors. I tried a repair on .NET 2. Anyone have any suggestions on another approach to fixing .NET?

  Thanks for your suggestions.

  Jeff

  Hello

  -What is the operating system installed on your computer?

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please ask your question in the Forum on TechNet Support. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/sharepointgeneral/threads

• Receive error message: the system cannot find the specified file. C:\Windows\System32\ &#60; LANG_NAME &#62; \mstsc.exe.MUI when I try to use remote desktop.

  Remote Desktop error

  I use Vista Home Premium.  I used to be able to use the remote desktop connection application, but all of a sudden, it stopped working.  When I try to run it I get this message:
  _________________
  The system cannot find the specified file.

  C:\Windows\System32\\mstsc.exe.MUI
  _________________

  Does anyone have a solution to this problem?  I do not have this file into C:\Windows\System32\en-US\... but perhaps it was corrupted somehow?

  Please help me.  Thanks in advance.

  Hello

  It seems that there are a few system files that have trouble.  One of them being mstsc.exe, I wish you find spyware or infection by the virus first, before you try the next step.  Please see the sticky thread in the security forum.  MVP offers some good advice how to remove these problems.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/fa30853d-719a-4265-9e7b-9287567d31e3

  If everything is clean, we will try a repair installation to replace the problem files and also to ensure that other system files are good.

  The 'repair' installation (upgrade on-site) will not affect your installed programs or data.  Just make sure that you are already connected to your computer when you start the installation.  Do not boot from the DVD.

  If the installation does not start automatically when you insert the DVD, run setup.exe from your DVD player.

  • When the Setup program starts and the install now screen, click install now.
  • Note When you receive the important Get updates for installation message, click go online.
  • Click upgrade when the which type of installation you want? appears

  Please let us know if this solves the problem for you.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is the function of automatic update of Windows found in the use of control panel of your compensation for the use of the Internet from my ISP?

  Original title: Windows updates

  Is the function of automatic update of Windows found in the use of control panel of your compensation for the use of the Internet from my ISP? If so, how? In addition, how to hide an update, I don't want to? For example, I use (and I'm happy with) Windows Internet Explorer (v7), but receive reminders to update update to Internet Explorer v9, which I don't want.

  Is there a way to prevent Windows Update for sending this reminder in the future?

  Geoff

  Hide and Yes will use you PSI data usage. It depends on how much the updates install you, on the amount of data it uses