Onboard & new PCI network adapters that are not detected

Similar Questions

• Drivers to be used on networked computers that are not directly connected to the HP Laserjet M1536dnf MFP

  Hi, I had problems connecting to computers on the network for printer. The printer is HP LaserJet Pro M1536dnf MFP. The computer that is connected to the printer directly via USB is fine. I downloaded solution complete driver installation on the site of hp, them and everything's fine. the problem is with the computers on the network, they cannot detect even the computer to add printer. And I have enabled file sharing and printer sharing advanced options of sharing on all computers. I also tried to install the same drivers I used on the local computer on the network computers, but its does not work. Please kindly advise me on which particular driver should I use or the solution.

  for this one, there was a simple solution... I forgot one small thing. After the installation of the complete solution from hp printer drivers on the computer connected to the printer via the usb port you then go to control panel > view devices and printers > click with the right button on active printer installed > printer properties > sharing > click on the list to the Director. that allows other computers on the network to view the printers.  was a bit stupid coz the solution was so simple.

• New SATA HDD are not detected on PowerEdge R710

  Hi guys,.

  I have a PowerEdge R710 with the reference number below

  Service number: ADMIN NOTE: maintain the label removed by privacy policy > | Express service code:

  ADMIN NOTE: kidnapped by the Express service code privacy policy >

  I have 2 x 750 GB SATA HDD that are not detected at boot of the server. Obviously, the installation of Windows Server 2012 is not possible because it does not find any drive installed in the system

  Please help as I am new to the hardware configuration.

  Thank you in advance.

  You must configure RAID first. If you use the RAID S100 controller on board, it is not compatible with 2012.

• Shairng private network file - files are not properly sharing

  I am a small business owner. I set up a private network. Instead of sharing in the 'Public' folder, I identified individual files and does the work to ensure the sharing of files. The files are "marked" as being shared in the network and sharing Center files appear when I click on "Show me the folders and files that I share", but when entering the network, the files are not displayed.

  Protection options password for account currently OFF sharing. Other sharing (print, media, CAD drawings) work.

  How to solve this problem?

  We have a laptop running Windows 7. two laptops and two desktops running Vista. All versions are Home Premimum and basically serve us well.

  Hello

  You must open a new folder under the main hard drive (or any disk storage) (you can also add void structure of folders for) and share the new folder as a whole. and leave only the public folders. Move the relevant files to the new folder structure.

  Maybe this can help more.

  -- ---------------------
  

  This message looks like a long history because I don't know what is the level of knowledge of the user, and what has already been done.

  The info goes through the motions of the configuration and verify most of the common aspects of the functionality of Windows OS' LAN.

  ----------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If necessary check specifically Permission/security settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  Please note that the users and groups listed on the screen shoot are just an example. Your list will focus on how your system is configured.

  ---------------------

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I want to see just all the Photos that are not in an album - possible?

  Hello

  is it possible to see all the photos that are not in the album?

  Photo on Mac

  THX

  Stefan

  Yes, create smart albums with the rule 'Album isn't everything. "

  For the file menu: file > new Smart album

  

  This album will contain all the photos that are not in any standard album.

• How can I see the photos that are not in an album?

  How can I see the photos that aren't in an album in the App "Photos"? I noticed that in the Album 'Pictures' are pictures I thought I deleted already. I would like to see all the photos in an album, so I can finally delete them.

  You can go the the file menu Photos and click New Smart Album, and then set the condition of Album - is not. This will create a smart album that will show you all the photos that are not in any other album.

• Satellite A300-1MC: network controllers drivers are not installed properly

  Hi guys...

  My first lol just purchased Toshiba and I can't ge the wireless to work?
  Toshiba A300 - 1MC Intel T5800 3gig of ram 20gig hard drive Vista Home wired Internet access works ok, but in Device Manager it says my network controller drivers are not installed properly?

  I have reset to setting faactory and reinstalled everthing but its still the same.

  Ideas a BIG help thanks in advance.

  This strange s
  Usually, using the operating system recovery disc must be set to the factory setting and everything should be ok.

  However, I recommend first upgrading the BIOS, then the LAN/WLan card driver.
  The card chip Realtek (Realtek 10/100 Base-TX) LAN and WLan card chip is Intel (Intel 802.11 a/g/n WiFi Link 5100AGN)

  Download the WLan driver from this page Toshiba WLan:
  http://APS2.toshiba-tro.de/WLAN/

  and the LAN driver can be downloaded from the Realtek page, or on site pilot European Toshiba too.
  Remove/uninstall the old drivers and then install the new drivers.

  Good bye

• Help - why the songs that are not on my iPhone appearing in my list of app music albums/songs?

  I have over 500 GB of music on my Mac, so I create a playlist for the songs I want to sync my iPhone. Yet when I look at my phone, there are many songs that are not in sync would be playlist. They cannot be read unless the phone is connected to my wifi at home, but I don't want them cluttering up my phone and makes it almost impossible to find the tracks I want to listen to.

  I hate the new music app. For the first time since I converted to Apple 10 years ago, I wonder if I can be forced away because it's so horrible. Why ruin a great product with terrible software? Anyway, if anyone can help me to fix this serious bug, I would be very grateful.

  If you go to the library of the screen and press the red text just below the icons of the album/playlist (where you select whether you want the screen to show the view of the artist/Album/songs downstairs there is a toggle to only show that downloaded music.) If you enable this, then only the songs that are actually ON your iPhone will be in BLACK characters. The rest of your music library to iCloud either won't display at all or be grey. Now - if you have a few streaming, you can see more songs, because the songs that are heard are cached in the memory of the iPhone box and supposedly deleted automatically when it fills up (but not user accessible unless you use some third-party programs).

  What you can do - so they need WiFi or data cell-, it's make a playlist in iTunes that you want on your iPhone. Then (assuming that Apple music and iCloud music library are running on both), you can go to the playlist and press the small cloud/down arrow icon and download these tracks on your iPhone. Then, you can play these songs without access to wifi or cell phone.

• Why peope post Questions that are not really questions and are locked from future responses?

  Why peope post Questions that are not really questions and are locked from future responses?

  These positions are known as sticky messages, Faustin - Sticky post' a sticky or sticky post is a type from which a topic in a forum online that is "pinned" near the top of the forum index, enhance its visibility and prevent it to be buried by newer messages. "  "

• Hotmail account: I can't receive e-mail from addresses that are not already in my contacts list

  I can't receive e-mail from addresses that are not already in my contacts list, for example the library.  My account has been hacked recently, and I have informed Windows CE.  I then installed Avast security.  Since only known e-mail senders spend their emails.  Help, please.

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  It seems that Avast is blocking messages from anyone not in your contacts list (much too tight fixed).  Disable the function of checking email and see if that solves the problem.  If so, run it without the option of e-mail enabled - it does not really help as long as you take normal precautions (as not to open attachments from people you don't know / trust and things like that).  If you don't know how to disable this feature, contact technical support Avast (I do not use the product so I don't know how, but it's probably under Options or something like that).  If this does not work, try to go to Microsoft Security Essentialshttp://www.softpedia.com/progDownload/Microsoft-Security-Essentials-Download-131683.html where I know that this problem is not happen and see if that solved the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to find computers that are not on the domain in an Active Directory forest.

  Hello

  I'm looking for a tool that can scan a subnet and give me the list of computers that are not on the field, but connected to the network. My company has recently spent a lot of users of the task force to the area, but there is a population of users who are unwilling to join the domain and still using the local administrator to log on to the computer.

  These computers do not meet the domain policies applied and causing many problems with the network and other systems on the field.

  Help, please.

  concerning

  Syed M. Uzair

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• way to find vm that are not removed from disk

  Is it possible that I can find, vm that are not removed from disk

  That is to say that "take inventory" but I forgot to remove the disc.

  Thank you

  If you only need a report, you can do it like this (I've made a few changes to your script).

  $unregistered = @)

  foreach ($Datastore in (Get-Datastorecluster xxxx |)) Get - Datastore)) {}

  # Collect .vmx paths of virtual machines stored on the data store

  $registered = @ {}

  Get - VM - Datastore $Datastore | %{

  $_. Extensiondata.LayoutEx.File | where {$_.} Name - like "*.vmx"} | % {$registered. Add ($_.) Name, $true)}}

  # Set up the search. VMX files in the data store

  New-PSDrive-name TgtDS-site $Datastore - PSProvider VimDatastore-Root '-' | Out-Null

  $unregistered += (@(get-ChildItem-Path TgtDS:-Recurse |)

  where {$_.} FolderPath - notmatch ".snapshot" - and $_. Name - like "*.vmx" - and! $registered. ContainsKey ($_.) DatastoreFullPath)} |

  Select DatastoreFullPath))

  Remove-PSDrive-name TgtDS

  }

  $unregistered | Export Csv c:\temp\vm-unregister.csv - NoTypeInformation - UseCulture

• How can I find photographs that are not assigned to any collection?

  Hello!

  I use LR 5.7.1 on a Mac.

  When I've airbrushed raw with PS CC images (and do not need file PSD more) I export the PSD (which is in my catalog) in JPG format and let it automatically add to my catalog. After that, I remove the PSD file. Which works very well.

  But... the new JPG file is not assigned to any collection. This is no problem unless I forgot to do it manually after export (and import).

  This brings me to my question.

  How can I find photographs that are not assigned to any collection?

  I tried with a smart collection after I found nothing suitable in the filter library. The search criteria, I tried are Source-> Collection with any of the conditions. One with an empty field, then with just a space and so on.

  Does anyone have a good tip for me?

  Thomas

  

  You can also add numbers if you have collections that do not use characters of the alphabet.

• Creation of UL that are not existing CSS rule style

  Hello

  I use a UL for a navigation bar. I created a CSS style to the UL.

  Now if I create another UL this new UL then takes its style from the CSS rule. How do I create another UL that are not automatically styled by my existiing rules? Do I have to create a unique ID for each UL?

  

  Make your selection for the beginning of the navigation-bar

  #sideBar ul

  There should be no other

  on the page that correspond to this selection.

• How to remove e-mail messages. No icon in my tray tasks and how to remove several e-mail messages that are not consecutively

  First of all, I can't find a top of icon delete or bottom or anywhere. Secondly, when I'll be that solved how can I remove a number of emails that are not in consecutive order.

  You can click with the right button on the e-mail toolbar, select Customize, find the Delete button and drag it to the toolbar.
  You can activate the message pane by using the F8 key and use this header button.
  You can right-click on the message and select Remove.
  You can also use the Delete on your keyboard key.

  To select the messages you use standard Windows selection methods.
  Hold down the control key while clicking on messages to select random messages.