One camera, mounted in first?

Similar Questions

• 2.5 x camera mount?

  All,

  I see the following in the user guide, however I HAV several SX20 camera mounts and I see no way of installing this camera on them.  I would say that my SX20 camera mounts are a bit older, we're going their when the SX20s started shipping, so unless they have changed with the release of 2.5 x camera...

  "The camera can be mounted on a screen with the camera support.

  This is part of the SX20 Quick Set package, or it can hold a

  flat surface. The image automatically. »

  Thank you

  Justin Ferello
  Technical Support Specialist
  KBZ, a Cisco authorized dealer
  http://www.KBZ.com
  e/v: [email protected] / * /

  See the Setup sheet (http://www.cisco.com/en/US/docs/telepresence/endpoint/quick-set-sx20/installation_guide/sx20_quick_set_installation_sheet_for_web.pdf).

  There are two media - one for Option A (x 12) and B (4xS2) cameras and the other for Option C (2.5 X) camera.

• SX20 camera mounting bracket

  Is the support that comes with the SX20 is available in a separate part, if a customer has lost their?  It's one that uses only adhesives/velcro to mount to the rear & top of the screen directly.

  I can't find a part number for what it isn't.  If anyone can help with a p/n?

  Thank you.

  See, camera-support-cisco-intp-c40, the part number is BRKT-PHD-MONITOR.

• Why I can't see color space: "Camera RGB" in first?

  Hello!

  I'm putting the hand on Davinci + first cc 2015 workflow. First of all, I'm trying to get my physical look less roughly the same on both - to start!

  Here's what I think looks good on Davinci Resolve:

  https://DL.dropboxusercontent.com/u/...2012.10.36.PNG

  Color space is: "Camera RGB.

  Support people to Davinci just told me that this same color space SHOULD be available on the first too! I just do not see it in my choice on first! The closest I can get is by using RedColor2:

  https://DL.dropboxusercontent.com/u/...2019.02.22.PNG

  But the idea of using davinci resolve + first cc 2015 is to synchronize together if I don't want that kind of speculation here. What is the problem, why don't I see it first? Is - this cos I didn't shoot my hardware with the best setting in my mx - a Redcode28 red but not the 36?

  Yours,

  Pekka Varis

  Finland

  First of all. nice camera... would like to have this puppy!

  Next... How you plan to run your workflow? Change with the original media to 'lock' in PrPro then PrPro a final result to use at will... or use a proxy change the PrPro process, then make a XML and conform to the original in the desire to export media?

  There are reasons to do both ways... the first makes it much easier to move from PrPro to solve, BUT... When you work with RAW images (as you seem to be?), you leave a few possibilities of classification behind it. Those minor, but for a perfectionist, which is 'minor', right? Also, the gradation of transitions is a pain when they are flattened.

  The second process... Support proxy in PrPro, then an XML outside PrPro, in the determination and consistent support for the rank of origin, is the one used for more critical work. For this workflow you would use the Red programs or Adobe Media Encoder to transcode to a codec that you use only for your edit within PrPro, all clips named exactly the same except for the extensions as the original media. You then import that into PrPro to your editing process, Editor, and once completed, create the XML file to resolve.

  Resolve, import the XML file, use its process for media conclusion / in line, do your rankings.

  In the second process, it makes no difference if PrPro sees things a little different, since it will have no effect on Resolve work with support of origin on the ranking.

  Checked with a colourist on this in the past, he prefers. His answer, one 7, 5 on the other (playing off the coast of the expression "six of one, half one dozen of the other")... because it depends on. Some of his works is ads, with 20 pieces (which many with short transitions) in a 30-second commercial. With the customer sitting on the couch, I look by degrees he get ALL those returning some transitions quite perfectly "mixed" is a total PITA bread... at this time, it is easier to have his assistant sign & are conform to the project and work a chronology that is not flat, then it can classify each element separately and transitions are not affected by the process of dimming.

  On some of the documentaries he worked with shots longer, most of the cuts are simple "cuts" and there are relatively few transitions, it may be easier and less work total to take just the flattened file exported out of PrPro and beginning of work. If someone made a good record of 10 - bit in PrPro to use at will, he can do pretty much whatever he wants and is not concerned with no longer have the "raw" data to work with.

  In both cases, your original question is moot. If you transcode to change in PrPro, re-compliant of classification with the support of origin in the will, it is not a problem PrPro doing with space color compared to what the determination. If you edit in PrPro and use the right settings preserve your data during both the edit & export, then Resolve can still do what you want, you will always be able to see.

  Neil

• DV to avi in one piece in the first 8?

  Hello! I wonder if anyone can help me with this problem

  I have a camcorder Canon of 2006 with only tape and dv output

  and I have a pc and the connection is ok, but I would like to have the whole 60 minutes

  in one piece as an AVI on my hard drive, I checked and unchecked the boxes but the first cut in small pieces-scenes 50

  It is where I am now, see photo: Hamra until tidslinje is Get of chronology and Split scenes is beyond scener

  

  Hello and thank you for your help, I followed your advice and like first do its probably

  the best way to do it because as you say I can put it together later in a better way.

  I had a problem with the FireWire cable does not connect, I'm talking to a video store in Gothenburg, Sweden

  and they told me that it is a common problem often with small contacts in the camera in the old FireWire 400

  Thank you once again

  By

• 4 k video mount in first Pro CC 2015.1

  Dear community,

  I use adobe Premiere pro CC 2015.1. I want to know that can I change 4 video k directly, without conversion or compression. Is this version is compatible to video editing 4 k or require any other plugin. Please suggest.

  and what are the system requirements to be able to edit a video in 4 k?

  My system configuration

  Windows 7 Professional 64 bit

  Intel Xeon CPU E5-1607 v2 @ 3 .00GHz

  32 GB Ram DDR3

  Tough - 1 TB WD10EZEX 7200 RPM disk

  Graphics, 1 GB NVIDIA Quadro K5000

  Lenovo l2251pwd - 22 po - Native - 1680 x 1050 monitor resolution

  Hello

  I m edition of 4K (Prores, RAW...) pictures on my laptop, then of course your hardware is capable. What camera do you use to capture your 4K videos?

  One thing you might consider doing is a SSD drive and a new monitor, yours is not HDMI or DisplayPort. The rest is fine.

• Multiple camera problems in first CC v7.1.0 (141)

  I have the CC of first edition and it automatically updated a few days ago at v.7.1.0 (141), but since the update, I tried to create sequences of several cameras, nest in a target sequence and instead of just displaying 1 layer of vidoe and target layer 1 audio in the sequence, it shows all videos and all sound from the camera multiple sequence elements.  Because of this, I can activate is more multi-camera editing.  Can anyone help or anyone else having similar problems?  I use a MBP OSX (v10.9), 2.7 GHz Intel Core i7, 16 GB of RAM.

  The 'selection' icon related selected or not? You can find on the top right of your timeline. Toggling it allows you to drop a nested sequence (eg. multicam) on a timeline as either a single nested element or view developed with all clips showing that, looks like you're talking about. This is the Central icon here:

  

  Good luck!

• I have four e-mail accounts, but evil is at the top of the list. How to change things so that the fourth one can become the first?

  When I run Thunderbird, the same as that of my four accounts/E-mail addresses is always at the top of the list. However, over the years, I added three other e-mail addresses, and I would like the newest one is the default address at the top of the list. How can I change the order of the list so that my recenty added most e-mail address becomes the top of the list the default?

  Install this add-on.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/manually-sort-folders/

• Printing of text selected cultures, one part of the first line - bug report 696566 - any input help or workarounds?

  Previous reports of this problem in this forum have had their closed discussions. It is still a bug in FF 17.0.1, and has a 696566 bug report. One suggested solution of definition of impression to 90% scale has no effect.

  Printing bug has now been fixed.

  change Some printing bugs have been fixed including some pdf issues and bug 684622
  

  Hope that your problems will be resolved in Firefox 21.
  Who will now average using night http://nightly.mozilla.org/

• How to get readers mounted with first names?

  How can I get the names in addition to C:, D:? In my application, I plug in a USB key, a new drive will be mounted. I tried getLatestDrive.vi in Labview, but had problems on some PCs. When my DUT is a blank card, Labview correctly detects the disc. But when the ASE is a non-Virgin Board, Labview is a hard drive E:\ drive which is false. Again, the problem has been found only on some of not all the computers we've tested on PC. Since the name of the drive of the ESA (besides the letter E: or I:, etc.) is known to me. So I want to find a function that lists the full names of the disks to locate my disc had TO without error.

  Thank you very much!

  Spring

  WMIC logicaldisk get name

  You can read about using wmic is very useful, try

  Logicaldisk get WMIC /?

  or

  LogicalDisk WMIC /?

  or

  WMIC /?

• Need help with multi-camera editing in first Pro CC/7.0

  I use 6.0 for a while now and had to install 7.0/cc, but now I can't find where to save the changes to multi-cames.  I have aligned my clips and created a new sequence and consistent multi-cam, I do not see the multi-Cam Editor.  Help, please!

  Hello

  The record button is virtue even menu button. Please add it to the section button in the program monitor.

  Kind regards

  Vinay

• Problem with settings of camera R3D in first Pro CC2015

  Hello

  I can't go into "DEVICE SETTINGS" on my R3D files. I tried with different footages, it did not work.

  The menu "device settings" is just gray... I can not click.

  I was in RED CINE X Pro, without any problem with the MDM. Same thing with DaVinci Resolve.

  None of the files are corrupt.

  Thank you for you helo!

  iMac (27 inch, at the end of 2013)

  3.2 intel core i5

  24Go ram

  NVIDIA GeFoerce GT755M 1024

  For any clip of R3D (or another format that used to have the Source settings) imported CC, 2015, the settings feature moved to Master Clip effects.

  Excerpt from the doc for help:

  Parameters of source code available in the effect controls panel

  For RED, ARRI, CinemaDNG, DPX and Sony F65 media files, you can set the Source settings using the master tab in the effect controls panel. Previously, the settings of the Source were available in a modal dialog box.

  Summary of new features

• Hi am gift, I can't find the window of several camera on first cc 2015

  Hi am gift, I can't find the window of several camera on first cc 2015

  you serve CS6 first which has the separate several camera window. First CC has multiple camera monitor in the program monitor. Click on the "key" icon and choose the multiple camera in the menu drop-down

• iPod touch 4 camera problem

  Hello, all!

  After starting my iPod for the first time in forever, the camera will not work.

  When I opened the application, the shutter does not open. If I close it (without closing completely VIA multitasking) and open it again, the shutter opens, but I see only black. Move to the front camera shows only black, too.

  Any suggestions?

  Thanks in advance.

  Hello.

  If you see a closed lens or a black screen when you open the camera app, try the following steps:

  1. Make sure that there is nothing of blocking the lens from the camera. If you use a case, try to remove it.
  2. Force the application to close, then open the camera again.
  3. Restart your device, and then open the camera again.
  4. If your device has a front and rear camera, both cameras by tapping try . If you see the firm objective or black screen on one camera, take your device to an Apple Store or Service provider authorizedto obtain assistance.

  If nothing helps you can contact - official Apple Support

• First Post, Skype webcam freeze.

  Hello everyone,

  I usually fix typing on Google but I can't find a way to get rid of this problem to Skype.

  I am running Windows 7 64-bit, with Skype. 6.16.

  I have two webcams, one built into my laptop and the external one, Logitech C270.

  Both worked perfectly until tonight. And I do not remember doing something special.

  So after 1 min, I see the light next to my camera flashes, then video freeze for other people with the fact that I am in contact. I still see myself to move. When I go to video option. I see myself on camera.

  First step: during the call, I try to stop the video, but I can't restart, the button remains grey. If the callee to see my avatar. My webcam light stay on.

  Second step: I hang up and remind them, but the video button remains grey.

  Third step: I uninstalled and reinstalled Skype. Same problem as above.

  Fourth step: I uninstalled my webcam driver and software and reinstalled them. Same problem as above.

  Fifth step: I've updated my Nvidia driver. Same problem as above.

  Sixth step: I uninstalled and reinstalled Skype twice in a row. Same problem as above.

  Seventh step: I check this problem with 3 other people. The problem occurs. So, it is definitely from my Skype.

  Can anyone help? Thank you very much.

  [Removed for privacy].

  Try to uninstall the currently installed version of Skype and install the 6.14.0.104 previous version:

  http://download.Skype.com/MSI/SkypeSetup_6.14.0.104.msi