Only CC will open the files I / eps

Similar Questions

• Photoshop CS6 will save the file as EPS or PDF.

  Hi guys. Forum first time poster here. It left me speechless.

  Computer: Intel (r) Core i7 with 16 GB of RAM and 600 GB free on my C: drive, you use Windows 10 and extended CS6.

  I have a complex shape file (made primarily of a pen tool) which is a solid color, with the text of the string in a headband which have been converted to shapefiles. I merged the individual forms into one, and it won't save. I tried to save it with them separated, and it won't save as EPS or PDF. It will save as PNG, JPEG and PSD.

  I need to save as EPS or PDF so that I can have sent to the printer.

  Both get a message "will not save due to program error".
  She will record her earnings per share if I remove "include vector data", but I need that checked. So, what could be the problem? All the paths look accurate.

  Help?

  * Oh! And I got 2 other people try to save the original file in case it was my program, and that they could not do it either. IT's not Photoshop, this is the file. Photoshop AND has access to 74% of usage, so it's not that either. **

  And you made me find the answer, Trevor.Dennis.

  You helped me to realize that the original forms have been disturbing Photoshop. Either he had too many vector points or... a link curve that he did not like... so since they are all form files, I merged them all together. Then, with the tool pen is selected, click right and choose 'set Custom Shape'... After about 10 minutes of waiting, Photoshop has accepted this and allowed me to save.

  Then, I created the new document and put the image there via the custom shape file. And he saved.
  TADA!

  Thanks again,

  Gwenn

• Open the file without walking record

  friends

  as I do whenever I open a file sincerely on the same record, which fills you with information whenever you open

  Tricampeon_1981 wrote:

  Excuse my little information that was rising, and the problem was solved with utlfile only had to open the file out of the loop

  Mark this thread as a RESPONSE

• "An error has occurred opening the file.

  Hello world

  I have a file which has been fine opening in CS4. Now, I try to open it in CC and it does not open.

  The error message is attached. I'm on a Mac under OS X 10.8.5.

  CC should be able to open CS4 files, correct?

  

  CS4 opened the file?

  Also have you tried flipping the toggle of the ACE in CS4 choose AS3.0 even if you use code 2.0 just to see if the CC will open the file? Who can determine that the problem is a useful dialogue missing for AS2.0. Sometimes just re-registration of a file just to get Flash to reopen as well.

• Shortcuts to programs, EXE files does not open (you will be asked which program I want to use to open the file)

  My system has developed a strange (and annoying) issue that no longer allows me to double click on the shortcuts of programs or EXE files.  When I do, I give myself a menu asks me what program I want to use to open the file, as if I was trying to open a file with an extension that is not associated with.

  The only way to get all the programs to run more is to right click on the shortcut and select "Run as Administrator".

  Right click on the shortcut also reveals a new 'momentum' (Yes, spelled with one S tiny) option in the menu.  I have not tried it works, in my view, it could be related to some false recently-removed security software that appeared out of nowhere last night.

  Any help to remedy this situation and get back to normal functionality would be greatly appreciated.  Thanks in advance.

  If program shortcuts are not no longer works, you will need to use a procedure special difficulty fo files .lnk (similar to the one used above with .exe files).

  Go to http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and select the .lnk and run it.  That should fix your shortcuts.  Or you can use the link provided above by Michael Murphy - it does essentially the same thing.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• System 32 error (0x00000020): "the process cannot access the file because it is being used by another process.". The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied))"

  Original title: svchost (1020)

  Event type: error
  Event source: ESENT
  Event category: general
  Event ID: 490
  Date: 2010-10-19
  Time: 14:51:34
  User: n/a
  Computer: ROB
  Description:
  Svchost (1020) an attempt to open the file "C:\WINDOWS\system32\CatRoot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb" for read / write access failed with the error System 32 (0x00000020): "the process cannot access the file because it is being used by another process.".  The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied)).

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Hi Robrw,

  1. when exactly you receive this error?

  2. don't you make changes to the computer before this problem?

  You can try to rename the catroot2 folder and check if it helps.

  Step 1:

  a. Click Start and in run type C:\windows\system32 and click ok

  b. find the Catroot2 folder. Right-click on Catroot2 and rename it to Catroot2.old

  If you are not able to do the normal mode, try to start in safe mode and rename

  Check out the link for more information on starting your computer in SafeMode below:

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are unable to access the catroot2 folder, and then try to change the permissions on the files and check if it helps.

  See the following article:

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  Step 3:

  You can also try to temporarily disable third-party security software and firewalls and check what is happening.

  Note: Activate the security software after the resolution of the problem.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• WMP will open the VTS_01_1.VOB and stop at the end of this file

  I don't know if this is the place to post this question, but it's here.

  I created a web page that lists the cover images all my DVDs that I have on an external hard drive and each cover image is related to the first file VTS_01_1.VOB for this DVD.

  I test page to see how it works for each device I have.  The page works perfectly with my tablet from Samsung, the player on the Tablet, I installed automatically go VTS_01_1.VOB, VTS_01_2.VOB and so on until the movie is done.

  If I use my pc Windows 7, WMP will open the VTS_01_1.VOB and stop at the end of this file, how can I get WMP to continue to the next file automatically?

  Personally, I would check the source code of the Web page of the first.

  Paste the full path to the video_ts.ifo file in a new MS Word document and save it as htm.  Then run the file [it should open in your default browser], then right-click on the page and select view source.  Find the link - it should look like

  href ="... / SomeFolder/VIDEO_TS. IFO "> D:\SomeFolder/VIDEO_TS." IFO

  assuming that D:\SomeFolder/video_ts.ifo is the text that is displayed for the link

  Then go to your actual Web page and discover its source to verify that the link contains this model.

  If the solution is not as simple as that, then you will need to post a question in the section Web & networks of this forum I don't know enough about writing for the Web page.

  To increase the chances of getting there help please include a description of what happens when you try to click on the link - rather than 'will not work.

• With the help of the command of hypertext to link that will open a file

  Is it possible for me to create a syntax that will open a Windows file? I have searched on the web as Adobe and I did not find anything. Ideas?

  Thank you!

  Salomé

  Create a marker of Hypertext newe "Go to URL".

  Change the text of the marker for example:

  message URL file://C:/users

  This will open the folder C:\users with Windows Explorer.

  At least it worked on my PC.

• I downloaded the demo for the English version of Windows, but cannot open the file Captivate_8_LS21.7z I have 32-bit. It will work or should I re-download?

  I downloaded Windows English version 1.45 GB trials.

  It downloaded, but I can't open the file Captivate_8_LS21.7z.

  I have 32-bit. Will this work?

  Hello

  In order to download / install Captivate 8 32-bit, you must download the 2 files (.7z and .exe) at the same place / folder.

  Once both completely downloaded files then you will need to run the .exe file and it will extract the .7z first and then to initialize the installation program. You don't have to open the .7z file.

  Let me give you the download links to Captivate 8 32 bit: -.

  Say the mention of the link below in any Internet Explorer open Web browser

  https://www.Adobe.com/cfusion/TDRC/index.cfm?product=Captivate

  Sign in using your Adobe id and your password, then you will be redirected to download the Captivate 8 Web Page.

  Do not click download. Kindly leave this window open as it is.

  Now copy and paste the reference to the link below in the new window of the same Web browser in which you opened the link above.

  http://trials3.Adobe.com/AdobeProducts/CPTV/8/Win32/Captivate_8_LS21.7z

  Then Save the file.

  Do the same for the mention of the link below and save the file .exe so.

  http://trials3.adobe.com/AdobeProducts/CPTV/8/Win32/Captivate_8_LS21.exe

  Make sure the two files (.7z and .exe) save/download in the same folder/location.

  NOTE: Wait for the two files at the end of download and then run the .exe file.

  Once you run the .exe, it will begin to extract the .7z file and provide Captivate 8 folder on your desktop that contains setup.exe. Run the setup.exe to install 8 Captivate.

  Kind regards

  Ajit

• Does anyone know the latest version of the Director who will open a file manager 4?

  Does anyone know the latest version of the Director who will open a file manager 4?

  I think it would be around 7 Director. However, see Colin Holgate response in this thread

• From today, Firefox will not open the files Adobe Acrobat to Adobe Reader, despite my player put as a default value in the Applications tab.

  Until today, I had no trouble opening the files Adobe Acrobat with Adobe Reader 9.5. (I need to use an older version of Adobe Reader, because I use a program called Macro Express, which does not recognize later versions.) As of this morning, when I click on a file Acrobat, I wonder what program I want to open it with. Even when I click on 'do this automatically... ". ', it is not doing. He asks me every time. I went to tools, Applications and changed all the questions to open with Adobe Reader related 9.5 pdf. This also does not work.

  access firefox options > applications and set the default action for the portable document (pdf) format.

  View PDF files in Firefox

• After you download a movie windows media player trys to open the file in the library and will not play movie I can do

  After you download a movie windows media player trys to open the file in the photo gallery and won't play movie what can I did the same thing when I try to play a dvd

  If you are using Win XP: -.

  http://www.dougknox.com/XP/file_assoc.htm

• Why 5 Lightroom will not open the files of my Lumix dmc of the G7.

  I have a number of digital cameras. However I just added Panasonic DMC G7 to my kit.

  I use Lightroom 5 and it is updated but it does not open the files from this camera. Help...

  Unfortunately, your camera model is too new to be supported in LR5.

  Upgrade to LR6 or use the free DNG Converter to continue using the LR5

• Adobe Reader 11 (XI) will not open the file via command line

  Hello

  I posted this question probably inappropriate topic earlier today, so I am repeating again.

  I installed the new Adobe Reader XI today and when I tried to open some PDFs via command line, it reported a syntax error. Now, this syntax worked so far on versions 9 and 10 (I checked today with them and it does not), so my question is - where can I find new syntax, if there are? Google search did not help. Or what else could go wrong?

  In previous versions, I was able to open the pdf file (on page 5) like this (everything was taken from the help file 'Open settings')

  «Page "/A" CompletePathToAdobeReader = "CompletePathToPDF", 5"»

  That is to say

  "C:\Program Files (x 86) \Adobe\Reader.

  but now - not that it opens a specific page, but it won't open the file at all.

  Edit:

  Operating systems: Windows 7, Windows XP

  Thank you.

  Post edited by: v604

  Yes, he has correctly reported because there is a syntax error in your order. Try spaces between the /A switch and open the setting. Try this:

  "C:\Program Files (x 86) \Adobe\Reader" /A "page = 5" "d:\V2\DataSheet.pdf" "."

  I hope this helps.

  Sumit-

• Satellite U300 PSU3DA: error: could not open the file attribute execution of concept maps

  I have a PSU3DA-U300 which I changed from Vista to XP.
  This is because my main computer use will be for navigation (boat) and I was told that most navigation programs will work better with XP. I have almost nothing on my laptop so far, and the system already seems to be slow and freezing too often.

  My question is now on the program of concept maps which I just installed and which does not open. He repeats to me "Eorror: could not open the file attribute.

  What does that mean? I uninstall and reinstall the program, and he comes back with this message.
  I had a glance at the Device Manager, and the only thing that seems incorrect is the PCI memory controller.
  I did a bit of research on this and it seems that this driver is not required for XP? Is this true?

  Would this be a cause of C-Maps program does not?

  Thanks in advance.

  > I did a bit of research on this and it seems that this driver is not required for XP? Is this true?
  Where did you read this info?
  I put t know if the driver is not required, but you get all the drivers on the Toshiba site.

  For your problem with concept maps, I think that it is best to contact you that support the conceptual maps. Here, this is a forum for Toshiba laptops.