trying to install a printer with no disc set lexmark

Similar Questions

• After trying to install word printer epsom has not stopped workung - uninstalled but stll not working not

  After trying to install a printer, Epsom SX130, on Windows 7, WORD has stopped working - have tried uninstall & restore but still cannot use WORD. After paying only £ 65.00 to restore the office, I'm very unhappy. It is the only document that we need to print, others may be sent by e-mail, but now I can't even open Word documents to use as attachments to an email. I'm totally desperate, do we buy a 'small' I wonder. More than 60 years, when I started it, maybe I was just too old or it's Windows 7 just make my / our life uncomfortable for us to update: Please keep in mind, I'm very, very, ridiculous with computers. We have done with a drive by the way if that makes a difference & downloaded an update. If the answer is "not compatible" that's fine, I can make documents on the old computer, BUT need words for emails: i.e. repeat orders etc. which are vital to our system of new physicians.

  Am totally fed up now...

  Hello

  1. what version of Microsoft Office are you using?

  2. you receive an error message when you start Microsoft Office Word?

  You can perform the system restore the computer to the date when the changes were made not (before the date where Microsoft Office was working fine).

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

   

  NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  For further assistance on the question, you can post your query in Microsoft Office community:

  Microsoft Office community

  http://answers.Microsoft.com/en-us/Office/Forum/Office_2007

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Runtime error trying to install the printer on laptop software

  I have a laptop HP with Windows 7 Home Premium SP1, my printer is a HP photosmart c5580 AIO. It prints well but without software of the printer on the laptop I can not scan to the computer and use all the features of the printer.

  That being said, I am now trying to install the printing software Online and cd and I get Microsoft C++ runtime error and it will not install software.

  Ive tired all convenience stores of HP, etc, etc...

  Help, please

  Sunny

  Hi sunny1881,

  Welcome to the HP forums!

  I see you have a Photosmart C5580 which becomes a Microsoft C++ runtime error when you try to install the software. I'm sorry to hear that, but I will certainly do my best to help you!

  I would recommend that you follow through this Re: Error message Microsoft visual c ++ runtime library through my colleague @SuperMario1 as these steps should be able to help solve your problem. This is a long thread, but the steps should help, so take your time and work through it.

  I would like to know how it goes for you

• Trying to install my printer Kodak after new XP installed. Error message {procedure entry point could not be found in the library of links Dynamics cscomp dll}

  I had a Trojan horse and had to do a reinstall of windows XP Pro is now trying to install my printer but I get the error message saying "entry point procedure GetMessage DLL is not found in the cscom dynamiclink library dll. Help, please!

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/308028

  It will be useful.

• Error: "error 1920 Print Spooler Service (spooler) could start" when trying to install the printer

  Original title: print spooler could not be started

  Trying to install a printer. Get "error 1920 Service print spooler (spooler) could start. Can you please help?

  Hi phil195golf,

  1. What is the brand and model of printer?

  Try these steps and check if the problem persists.
  Step 1: Run Microsoft Fix to diagnose the problem
  a. see you can not add a printer and you receive spooler printer in Windows XP error messages
  b. click Microsoft hotfix and run the tool successfully.
  c. restart the computer.
  d. install the printer and check if the problem persists.

  Step 2: If the problem persists, install the printer by turning off all non-Microsoft programs
  see How to configure Windows XP to start in a "clean boot" State .
  b. follow steps 1 and 2.
  c. installing the printer and check the result.

  Note: Article, remember to follow 'steps to configure Windows to use a Normal startup state. "

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I am trying to install a printer wifi (Kodak ESP 7250) and they are both connected to the same wifi but when I try to add the printer, my PC can't find it.

  I am trying to install a printer wifi (Kodak ESP 7250) and they are both connected to the same wifi but when I try to add the printer, my PC can't find it. I made sure they are both connected to my home network and when I go to control panel / printer and try to add a network printer / wireless. He won't find it. Any ideas?

  Hello

  I suggest you to visit these links and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  It will be useful.

• I bought Adobe acrobat 8 std about 3 years ago. I tried to install the product with the serial number only. indicated on the package. I received a message in my attempt to install "serial No. not valid ". I also have a 24 digit no activation. Help?

  I bought Adobe acrobat 8 std about 3 years ago. I tried to install the product with the serial number only. indicated on the package. I received a message in my attempt to install "serial No. not valid ". I also have the 24-digit activation number. Can you help me with installation?

  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-valid-product.html

• So I can pick it up at the factory using F11 with no disc setting?

  So I can pick it up at the factory using F11 with no disc setting?

  Hello

  Recovery files are normally hidden in the Windows Explorer, so it wouldn't be a problem - the only way you can be sure that it works or not is to try it.

  If you find that it does not work, you can order a set of replacement recovery disks using the link below and use them to reinstall the OS.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Blue screen come when you try to install a printer with a disk

  I tried to install a new Dell V313w printer, it starts to install & then the blue screen appears. It happened 4 times. the codes are 0X0000007E 0XC0000005, 0x00000000, 0XF7A117C0, 0XF7A114BC. I use Windows XP. Help please.

  It can help to look at the files minidump against accidents with a debugger.

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• How to install the printer with the laptop. Printer was used with another computer.

  I wanted to use a printer with my laptop lexmark. The printer was used with another computer and it worked fine, but when I tried to use it with the laptop, I was not able find the installation disk and tried to install without it. The laptop produces a message indicating he could find the internet facility info if I accepted this. He had apparently fulfilled this function, and I tried to print a document. The document has been printed, but the result was so low, that it was not readable. I then found the installation disk and tried to restart but was confused by the messages and options. I don't have a printer that prints. Help.

  "Mr. jiggs" wrote in message News: * e-mail address is removed from the privacy * .com...

  I wanted to use a printer with my laptop lexmark. The printer was used with another computer and it worked fine, but when I tried to use it with the laptop, I was not able find the installation disk and tried to install without it. The laptop produces a message indicating he could find the internet facility info if I accepted this. He had apparently fulfilled this function, and I tried to print a document. The document has been printed, but the result was so low, that it was not readable. I then found the installation disk and tried to restart but was confused by the messages and options. I don't have a printer that prints. Help.

  Unplug the printer from the laptop.  In Vista or Win 7, click Orb (Start), settings, Control Panel, printers. When the Lexmark printer is found, right-click on it and then click on remove.
   
  Equip your drive and install the drivers and programs on the disk, then when told the printer.  You should have a printer now works.

• Tried to install a printer in windows 7 using a vista driver. Now, I get an error 0 x 00000002.

  The problem occurred when trying to install a network printer on my laptop that is running Windows 7.  Now, when I select the printer in the menu "add a printer" and press "Next", I get 'Unable to connect to the printer' & 'the operation failed with error 0x00000002 ".
  The printer is a network printer, connected to my desktop running Vista.  In addition, it is a Brother MFC-8300.
  I can install the printer when it is connected directly to my laptop, but when I try to add it as a network printer, I have the problem that I have just described.  I should mention that I had to install a special version of the driver ("Brother MFC-8300 v.2") on my desk to solve another problem, I had with another computer on the network, which was running Vista-64 (see http://www.vistax64.com/vista-print-fax-scan/77226-brother-mfc-8300-printing-blank-pages.html).
  So basically this is what happens:
  (1) I click on 'add printer '.
  (2) I click on 'Add a network, wireless or Bluetooth printer.'
  (3) I select ' Brother MFC-8300 v.2 on VISTAMACHINE ' and click 'next '.
  (4) a "Windows printer Installation" window appears and says "connection to Brother MFC-8300 v.2 on."
  VISTAMACHINE"and underneath"seeks pilot."
  (5) a "Add a printer" window appears with an "X" inside a red circle next to the mention 'to connect to the printer.
  "Windows cannot connect to the printer", and "Operation failed with error 0x00000002".
  Does anyone know what I need to do?

  Create two printers on the computer, the device sharing.  Make a word share name, do not use the name of the driver for sharing.  Spaces in the name to make it even more difficult when you set a SMB (local port) connection to the printer.  Set the Port for two printers shared the same (I assume that the device is connected to a USB Port).

  Use the driver Vista Inbox for the part for 32-bit machines.  Use the driver provided Brother (Brother MFC-8300 v.2) share for 64-bit machines.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Error 1053 while trying to install a printer.

  * - Original title - error 1053

  Tried to install the new printer on Windows 7 OEM OS. Put it on CD, you click on run and immediately got error stating: (abbr.). Print spooler Windows was arrested. Start the print spooler service. I click Start stressed after the highlight of print spooler in Services.  Immediately receive error 1053: could not start the print spooler. Service has not responded to the request in a timely. Attempted to fix by downloading the Microsoft .NET Framework 1.1 Service Pack 1 hotfix. Tried 4 different patches that were made to work for Windows 7. Everyone says this system not covered with this patch.  Without other options, any solution?

  Hi man 3D.

  I understand that you can not install a printer. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. What is the brand and model of the printer?

  3. have you made changes on the computer recently?

  4. what security software is installed on the computer?

  Method 1.

  Open the printer Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Printer-troubleshooter

  Method 2.

  Install a printer: http://windows.microsoft.com/en-US/windows7/Install-a-printer

  Method 3.

  Solve printer problems: http://windows.microsoft.com/en-US/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Method 4.
  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 5.

  I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Try these steps and let us know the status so that we can help you.

  Thank you.

• I am trying to install a printer/scanner HP F4400 on Vista Home Premium 32 bit and may not have to install.

  HP has me turn off the firewall, hide windows programs, uninstall HP System.  I also cleaned the registry, disk and defrag, I also downloaded the hotfix from Microsoft and it is impossible to identify the problem or difficulty there.  At one point I could get to download the software before I would get error messages or #33472310 and 25672887.ZIP.  Now I can't get that far, I get to the point where he say he prepares the system for installation when it stops with the message "the system cannot ind specified path. I'm not now about to install I was Sunday when I started.  Can anyone help?

  Hi Julien,

  Please provide the complete error message you receive when installing the printer software.

  I suggest you try the following steps:

  Step 1: use the Windows Installer Cleanup utility for delete all entries that are associated with the product that you have trouble to install (printing software):

  Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.

  In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product

  Description of the Windows Installer Cleanup utility

  http://support.Microsoft.com/default.aspx/kb/290301

   

  Step 2: Put the computer to boot and then try to install the program

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Trying to install hp officejet with CD Windows98, me, 2000, XP on the new computer hp laptop with Windows 7.

  Get the error message this new operating system, released after the installation of hpofficeject CD.  How to install my printer on hplaptop hpofficejet.

  hpofficeforum wrote: Yes, it is: "HP Officejet 7410xi all-in-one.

  Hello hpofficeforum, thank you for the information. Here is the link for the package full feature software/driver of your printer be used with Windows 7.

• I need help trying to install my printer driver for Lexmark X 1270 on my laptop Toshiba running Windows Vista Basic program.

  The cd I have for printer gives me error message 'Pilot' not compatible with the current system and I can't install the printer driver.  Is there a cd that I can buy or download free I can get?

  Yes - go to http://support.lexmark.com/index?page=content&productCode=LEXMARK_X1270&actp=PRODUCT&id=DR15494&segment=DOWNLOAD&userlocale=EN_US&locale=en and download the latest software.

  Note: the link above is for the 32-bit software, so if you need the 64-bit version, it can be downloaded at http://support.lexmark.com/index?page=content&productCode=LEXMARK_X1270&actp=RECOMMEND&id=DR11218&segment=DOWNLOAD&userlocale=EN_US&oslocale=en_US&locale=en