Only one Integrator for export csv to table and update the table?
HelloI have a requirement where I need to create a single Integrator for export data in the CSV file into a custom oracle table and also use the same Integrator to download and update the custom table data. Is it possible to do this in a single Integrator.
Thank you
Kishore
Yes you can do it.
You must create a type of UPDATE metadata Integrator.
First time:
Custom table is empty.
WEB ADI will download a blank Excel sheet. Copy the data from the CSV file and paste this Excel.Then download this file that will update the Integrator.
A sample example is as follows:
web_adi_pkg.main (param_1, param_2,... param_n)
download_data;
upload_data;
Download data-> select query to download the data (select * from custom_table)
Download the data-> insert into custom_table where NOT EXISTS (select 1 from custom_table where primary_key = primary_key_col_from_csv)
update of custom_table where there are (select 1 from custom_table where primary_key = primary_key_col_from_csv)
Please try above logic.
Tags: Oracle Applications
Similar Questions
-
Can I find out if I had to buy the Adobe Creative Suite 6 Design & Web Premium, but I subscribed to photography CC for only one month plans, can I unsubscribe it and use the one bought instead?
I subscribed to the creative cloud only because I did not know that my College courses will be using other software too.
I hope to unsubscribe to the creative Cloud version and use the purchased instead.
But if it is not possible, I'll just use the CC version for this year and use the one bought on my other PC.
Hi, NGOs,
Yes, if you intend to use CS6, you can still use it after the cancellation of the plan of the CC photography, you can also improve your plan to plan photography to Creative Cloud applications
If you wish to cancel your plan well photography please contact support by calling/chat for cancellation requests and billing queries:
* Be sure to stay connected with your Adobe ID before accessing the link above *.
You can also check the help below document:
https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
Please go through the Adobe - General conditions of subscription as well.
He hopes to help!
Rayyan
-
Observed only one IP for 11 GR 2 RAC SCAN, all the problems?
Hello
In one of our customers environment I've observed that they only used a single IP for RAC 11 GR 2 ANALYSIS, but wherever I know Oracle recommended to use 3 IPs to SCAN.
There will be problems with the single use IP Scan instead of three?
Please suggest.
Thank you
Mahi
A single SCAN VIP (with the SCANL) would be necessary in fact to get the job of RAC 11.2. Three are recommended for environments where the only VIP SCAN isn't able to handle the workload. So there is nothing wrong in this moment with your configuration. It seems, you use a configuration of DNS to resolve the name SCAN and your guys N/W used a single IP address only to the name of SCANNING resolution.
Aman...
-
I need to create a table of contents in iPages but I want only one word for the title, not the line of holes. Or, how can I change the contents of the table? Thank you!
Yes, you can have a one word title, by assigning a paragraph style title to this one word. No, you cannot change the text in a Table of contents, but you can change paragraph style font attributes (line) and add for example, a head of points between the types of OCD paragraph and page numbers. No part of the table of contents will not provide hyperlinks in exported PDF documents.
When you look up in the menu bar, you can see the word iPages, or simply Pages. There is no product of iPages.
-
Shoot only one email for each account
I have a table with account, e-mail columns. Each account has five different emails. Now, I want to draw only one email for each account. One of the five e-mails for each account. Please help me with the SQL.Varun says:
I have a table with account, e-mail columns. Each account has five different emails. Now, I want to draw only one email for each account. One of the five e-mails for each account. Please help me with the SQL.Assuming that all of the 5 different emails are in a single column
SELECT account,email from (select Account,email,row_number() over(partition by account) rn from your table) where rn=1
Hope this helps
Kind regards
Claudy -
I bought Adobe CC through my University, but once I started to install update 2015 yesterday, he said that I only had trials for programs like After Effects and Speedgrade. I am unable to redeem a subscription, because it was a continuous single thing of educational personnel. What should I do?
Thank you for your help. I spoke with one of your customer service representatives, and the question seems to have been based on accounts. I think it is resolved.
-
Format exit via Export-CSV to include spaces in the row headings?
Format exit via Export-CSV to include spaces in the row headings? I get errors when putting spaces in the code.
How to export data via export-csv to place spaces in the header line? That is to say. in script below... I need the header lines VMName and IPAddress to have spaces in them as 'Name VM' and 'IP address '?
*****************
Get - VM | %{
$vmGuest = $_. Get-VMGuest
$row = "" | Select VMName, OS, host, CPU, IPAddress
$row. VMname = $_. Name
etc...
You can place spaces in the properties of the object like this:
Get-VM | %{ $vmGuest = $_ | Get-VMGuest $row = "" | Select "VM Name", State, OS, Host, CPU, "IP Address" $row."VM Name" = $_.Name etc .....
Robert
-
in bulk accumulate in plsql and update the same table.
Hello
I use bulk collect and update the table that I use the slider. This table has nearly 1 million records. There will be problems with my code? Any help is greatly appreciated.
DECLARE
terminate_reason VARCHAR2 (1000);
time_line NUMBER;
limit_in NUMBER;
CURSOR cur_violations IS
SELECT * from abc_table;
TYPE cur_abc_table_type IS TABLE OF cur_abc_table % ROWTYPE INDEX BY PLS_INTEGER;
cur_abc_table_rec cur_abc_table_type;
BEGIN
limit_in: = 5000;
OPEN cur_abc_table.
LOOP
Get the cur_abc_table COLLECT in BULK
IN limit_in LIMIT cur_abc_table_rec;
dbms_output.put_line ('new count is' | cur_abc_table_rec.count);
WHEN OUTPUT cur_abc_table_rec.count = 0;
BECAUSE me in 1... cur_abc_table_rec. Count
LOOP
time_line: = trunc (sysdate) - cur_abc_table_rec (i) .viol_date;
IF (time_line > 1000)
THEN
terminate_reason: = 'NOTWELL. "
ON THE OTHER
terminate_reason: = 'PUSHED ';
END IF;
UPDATE abc_table v
SET
v.pers_terminate_reason = terminate_reason;
END LOOP;
END LOOP;
COMMIT;
CLOSE Cur_abc_table;
EXCEPTION
WHEN no_data_found THEN
dbms_output.put_line ('no data is found in the selection' |) SQLERRM);
WHILE OTHERS THEN
dbms_output.put_line ('another error' |) SQLERRM);
END;
Thank you
KK
What happened when you tried? The sliders were ' for the update of "syntax, so there is no general problem update lines inside a loop of cursor.
The big question you have, it is that the loop is completely and totally useless. What you can do in SQL, do in SQL - not to complicate things with PL/SQL that you don't need.
-
Why is able to save and update the passwords for sites other than those of Blackboard FF?
I am able to save and update passwords on other sites, but not on the Blackboard learn for my University. They force us to change our pw is from time to time, and I think I noticed it after that Blackboard did some updates to their site. It will always load autofill with my old account and password, but not update it. I deleted the password stored and tried to get FF to remember once again on my laptop, but it has not yet asked to save him. I'm guessing that there is a new code or a script for the journal in the procedure? Is there a manual way to enter and update the credentials stored?
Hello, sites can specify that passwords should not be stored (however I do know that if this is the case on the page you are having problems with, since you did not specify which University it affects). as a way to get around this, you can use an addon like this: https://addons.mozilla.org/firefox/addon/remember-passwords
-
So do not use computer for a while, it locks and requires the initial password to get back in. When it becomes available, we've been thrown off internet, or another program we are.
I don't know why Mr. Murphy suggested a system restore. Maybe he interpreted your post differently I did. You have your screen standby/power options defined on too short a time. You can also disable the requirement for a password during the recovery.
Right-click on an empty area of the desktop and click on personalize. To customize the applet opens. Click the screen saver. Change the timeout to something reasonable like 10 or 20 minutes. You will see where you can clear the check box next to the "password required on curriculum vitae... ».
Now do the same in the (Control Panel) Power Options applet. This link contains pictures showing you how to disable this option:
MS - MVP - Elephant Boy computers - don't panic!
-
you want to create a new look for our website using Muse and move the hosting of GoDaddy for Business Catalyst. How can I publish my new Muse on exsiting URL design and change hosting? @@
Hi love,
You can publish your Business Catalyst, simply open your file of muse and select files-> publish.
Please refer to this tutorial:- publish your site with Adobe Web Hosting | Learn the Muse | Adobe TV
In addition, once your site is published, you can add your domain to your site hosted on BusinessCatalyst.
Please refer to this tutorial to add your domain name:- http://helpx.adobe.com/business-catalyst/using/change-site-domain.html
Hope this helps
Kind regards
Rohit Nair
-
Only one speaker (for both) to work (after checking the FAQ)
Hello
I have an inspiron N5110 R15 3 years now, a few days ago one of the speakers stopped working. When I do a test of stereo sound, the left speaker (the one that always works) its left AND RIGHT sample tones. so I figure this is on some kind of maybe Mono?
-When I plug the headphones I have the sound on both sides.
So far, I have tried
1 reset
2 tried update driver if the Device Manager
3. turn on device
4A ran the audio problems (win 7, 64 bits)
5. looked around the frequently asked questions here
* I do not uninstall the driver and downloaded a new because it seems strange to be the issue, after working for 3 years and all of a sudden it stops. you are the experts, so I'll gladly do if you say.
current driver is manufactor (IDT high definition...)
Thank you in advance.
Another test, that you can run is ePSA Audio Quick Check. Note that not all ePSA and ePSA models do not all control by Audio fast. If you do not then just fail the color bar test as described in the FAQ. If you hear tones in the two speakers at the trials then the speaker itself is good and another part is the cause of the problem, probably the socket for headphones, since you know the audio working properly up to this day.
If you hear only tones in one speaker and the other speaker is confirmed then failing or has a bad connection.
The final test you can do is to perform a System Recovery. If it's a software problem then recovery will fix the problem and if it is material, then it will be no and hardware will be confirmed as the source of the problem. But no point in doing so, if only one speaker is heard in the previous test...
icecoldnineI do not uninstall the driver and downloaded a new because it seems strange to be the issue, after working for 3 years and all of a sudden it stops.You need not to do because you tried the native driver which served the same purpose. A simple re-installation of the audio driver (no download) is that your settings will be lost - in other words, the default configuration is restored thus exclude a problem of configuration, such as defined as mono in the sound properties.
If you want to check this, open the playback of the sound properties, right click on the speaker/headphones, select Properties, click the levels tab, click the Balance button. It does not matter how cursors are defined so that they are both the same level of the dB.
Download a new copy of the pilot aims to eliminate corruption from the existing driver. Sometimes, they stop everything works correctly.
-
Traffic permitted only one-way for VPN-connected computers
Hello
I currently have an ASA 5505. I put up as a remote SSL VPN access. My computers can connect to the VPN very well. They just cannot access the internal network (192.168.250.0). They cannot ping the inside interface of the ASA, nor any of the machines. It seems that all traffic is blocked for them. The strange thing is that when someone is connected to the VPN, I can ping this ASA VPN connection machine and other machines inside the LAN. It seems that the traffic allows only one way. I messed up with ACL with nothing doesn't. Any suggestions please?
Pool DHCP-192.168.250.20 - 50--> for LAN
Pool VPN: 192.168.250.100 and 192.168.250.101
Outside interface to get the modem DHCP
The inside interface: 192.168.1.1
Courses Running Config:
: Saved
:
ASA Version 8.2 (5)
!
hostname HardmanASA
activate the password # encrypted
passwd # encrypted
names of
!
interface Ethernet0/0
switchport access vlan 20
!
interface Ethernet0/1
switchport access vlan 10
!
interface Ethernet0/2
switchport access vlan 10
!
interface Ethernet0/3
Shutdown
!
interface Ethernet0/4
Shutdown
!
interface Ethernet0/5
Shutdown
!
interface Ethernet0/6
Shutdown
!
interface Ethernet0/7
switchport access vlan 10
!
interface Vlan1
No nameif
no level of security
no ip address
!
interface Vlan10
nameif inside
security-level 100
IP 192.168.250.1 255.255.255.0
!
interface Vlan20
nameif outside
security-level 0
IP address dhcp setroute
!
passive FTP mode
DNS lookup field inside
DNS domain-lookup outside
pager lines 24
Within 1500 MTU
Outside 1500 MTU
mask 192.168.250.100 - 192.168.250.101 255.255.255.0 IP local pool VPN_Pool
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global interface 10 (external)
NAT (inside) 10 192.168.250.0 255.255.255.0
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.250.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Telnet timeout 5
SSH 192.168.250.0 255.255.255.0 inside
SSH timeout 5
SSH version 2
Console timeout 0
dhcpd dns 8.8.8.8
!
dhcpd address 192.168.250.20 - 192.168.250.50 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image
SVC disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2 image
Picture disk0:/anyconnect-linux-2.5.2014-k9.pkg 3 SVC
enable SVC
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
value of server DNS 8.8.8.8
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
tunnel-group AnyConnect type remote access
tunnel-group AnyConnect General attributes
address pool VPN_Pool
tunnel-group AnyConnect webvpn-attributes
enable AnyConnect group-alias
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:30fadff4b400e42e73e17167828e046f
: end
Hello
No worries
As we change the config I would do as well as possible.
First, it is strongly recommended to use a different range of IP addresses for VPN clients and the internal network
No VPN_Pool 192.168.250.100 - 192.168.250.101 255.255.255.0 ip local pool mask
mask 192.168.251.100 - 192.168.251.101 255.255.255.0 IP local pool VPN_Pool
NAT_0 ip 192.168.250.0 access list allow 255.255.255.0 192.168.251.0 255.255.255.0
NAT (inside) 0-list of access NAT_0
Then give it a try and it work note this post hehe
-
Since the conversion of my site to the 'Recommended reading' page of WordPress does not display the book, I have listed this link to Amazon. Only one book associated with another Web poster site, but not Amazon Books.
This does not happen on Internet Explorer. I asked this question last week, but received no response.
Can you help me? Go to: www.transitionexecs.com and click on "Bibliography" to see what I mean.You have ad-blocking software?
These links have ad in the url that may trigger such software.
See:
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
-
I pay for monthly cc cannot open soft, adobe that one possibility for a month after all locked?
Hi Noel, please try the steps mentioned below.
1 disconnect and reconnect to creative cloud
- https://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html
- https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html
2 CC asking serial number
3 CC back unexpectedly to the trial
- https://helpx.Adobe.com/Creative-Suite/KB/trial--1-launch.html
- Creative products of cloud back to trial after upgrading to Mac OS X 10.7.4 | CCM
Let us know if any links are useful.
Atul_Saini
Maybe you are looking for
-
Firefox 3.6 tracks great .but when I install 4 all that is this crash when it starts. do you have a complete uninstall. and then delete all files in firefoxthen firefox installed on a 2nd drive... to see if that would help. stop crashing when it star
-
Windows 7 backup complete with ignored files
The backup finishes successfully, but with the ignored files. Windows Explorer, I can't find the files on my C drive. Why is he looking for these files as part of the backup. How can I adjust the backup so that it will treat without looking for th
-
Add the .jar to the Windows Server 2003 Group Policy
So I have an executable JAR file that is intended to run our ads system employee. It reads the data from a separate txt file and displays it in a JFrame. My goal is to have this launch when you connect to all the computers in the workstation. The pro
-
When I shut down my computer, I get a box that says: ccsvcHSt error end of program. Can someone help me with this. I have a Windows XP Home Edition. Thank you.
-
Search for downloads on a google search
Hello everyone. Recently, I met a problem in Google Chrome. When I try to search something on google chrome, it will download a file search, and proper research cross. However, if I open an inrecognito window google search and here, everything works