Observed only one IP for 11 GR 2 RAC SCAN, all the problems?

Similar Questions

• Only one Integrator for export csv to table and update the table?

  Hello
  I have a requirement where I need to create a single Integrator for export data in the CSV file into a custom oracle table and also use the same Integrator to download and update the custom table data. Is it possible to do this in a single Integrator.
  
  Thank you
  Kishore

  Yes you can do it.

  You must create a type of UPDATE metadata Integrator.

  First time:

  Custom table is empty.

  WEB ADI will download a blank Excel sheet. Copy the data from the CSV file and paste this Excel.Then download this file that will update the Integrator.

  A sample example is as follows:

  web_adi_pkg.main (param_1, param_2,... param_n)
  download_data;
  upload_data;

  Download data-> select query to download the data (select * from custom_table)
  Download the data-> insert into custom_table where NOT EXISTS (select 1 from custom_table where primary_key = primary_key_col_from_csv)
  update of custom_table where there are (select 1 from custom_table where primary_key = primary_key_col_from_csv)

  Please try above logic.

• I need to create a table of contents in iPages but I want only one word for the title, not the line of holes. Or, how can I change the contents of the table? Thank you!

  I need to create a table of contents in iPages but I want only one word for the title, not the line of holes. Or, how can I change the contents of the table? Thank you!

  Yes, you can have a one word title, by assigning a paragraph style title to this one word. No, you cannot change the text in a Table of contents, but you can change paragraph style font attributes (line) and add for example, a head of points between the types of OCD paragraph and page numbers. No part of the table of contents will not provide hyperlinks in exported PDF documents.

  When you look up in the menu bar, you can see the word iPages, or simply Pages. There is no product of iPages.

• Can I find out if I had to buy the Adobe Creative Suite 6 Design & Web Premium, but I subscribed to photography CC for only one month plans, can I unsubscribe it and use the one bought instead?

  Can I find out if I had to buy the Adobe Creative Suite 6 Design & Web Premium, but I subscribed to photography CC for only one month plans, can I unsubscribe it and use the one bought instead?

  I subscribed to the creative cloud only because I did not know that my College courses will be using other software too.

  I hope to unsubscribe to the creative Cloud version and use the purchased instead.

  But if it is not possible, I'll just use the CC version for this year and use the one bought on my other PC.

  Hi, NGOs,

  Yes, if you intend to use CS6, you can still use it after the cancellation of the plan of the CC photography, you can also improve your plan to plan photography to Creative Cloud applications

  If you wish to cancel your plan well photography please contact support by calling/chat for cancellation requests and billing queries:

  https://helpx.Adobe.com/contact.html?step=CCSN_membership-account-payment_cancel-your-memb ership_stillNeedHelp

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Please go through the Adobe - General conditions of subscription as well.

  He hopes to help!

  Rayyan

• Shoot only one email for each account

  I have a table with account, e-mail columns. Each account has five different emails. Now, I want to draw only one email for each account. One of the five e-mails for each account. Please help me with the SQL.

  Varun says:
  I have a table with account, e-mail columns. Each account has five different emails. Now, I want to draw only one email for each account. One of the five e-mails for each account. Please help me with the SQL.

  Assuming that all of the 5 different emails are in a single column

  SELECT account,email
  from (select Account,email,row_number() over(partition by account) rn
  from your table)
  where rn=1
  

  Hope this helps

  Kind regards
  Claudy

• I have 2 versions of windows vista running on my computer. One is before it crashed and it took all the RAM (Ram)

  I can't clean the discs because I can't load any programs because the memory has faded.  So I can not put a page of my computer desktop or download programs, I need to get my images that I have on the other program running.  I can't open one of these programs because I don't have the authorization even if I was always the user and administrator.  What I would do.  Can I add more memory Ram?  Can I remove the old stuff that I can't open anyway.  DLLs etc.  I downloaded vista 2pr, but it does not work.

  Hello

  Here is the information from your other question here about it:

  "I can't collect any information of my system information page."  When I connect I get redirected to a page that asks me what version of vista I want to open.  One is Microsoft vista and the other is windows vista.  The Microsoft is the only one that works. The other takes me a blank page. »

  "I have 2 versions of windows vista running on my computer. One is before it crashed and it took all the RAM (Ram).

  I suggest that you save your data and reinstall the operating system properly.

  There are several methods to reinstall Vista.

  See what methos works for you.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Windows xp for a Dell c400 install on all the computers other than the particular model?

  Windows xp for a Dell c400 install on all the computers other than the particular model?  For example, a Dell inspiron 2200 or 1100 or bridge or Compac.

  Hi sammytate,

  If you have a Windows XP installation disc, you can install it on all computers, regardless of the brand & model computers.

  However, the product key that comes with the only usable installation disc on a particular computer.

  Hope the helps of information.

• My Apple ID has been locked for security reasons. I have all the details to recover my account that the account was created by a child of 6 years. How to unlock my account to use the same?

  My Apple ID has been locked for security reasons. I have all the details to recover my account that the account was created by a child of 6 years. How to unlock my account to use the same?

  < email published by host >

  It is illegal for a child from 6 years to create an Apple ID.

  You can take a date-genius bar with Apple and bring the original receipt Apple.

• I try to install the service pack 2 for xp home. I tried all the languages but it stil says wrong language.

  What language is my service pack

  I try to install the service pack 2 for xp home. I tried all the languages but it stil says wrong language

  What is the language of your operating system?

  Select your language from the option 'Change language' of this link and download the SP2:

  Windows XP Service Pack 2 network installation Package for IT professionals and developers

  http://www.Microsoft.com/download/en/details.aspx?ID=28

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

• Only one speaker (for both) to work (after checking the FAQ)

  Hello

  I have an inspiron N5110 R15 3 years now, a few days ago one of the speakers stopped working. When I do a test of stereo sound, the left speaker (the one that always works) its left AND RIGHT sample tones. so I figure this is on some kind of maybe Mono?

  -When I plug the headphones I have the sound on both sides.

  So far, I have tried

  1 reset

  2 tried update driver if the Device Manager

  3. turn on device

  4A ran the audio problems (win 7, 64 bits)

  5. looked around the frequently asked questions here

  * I do not uninstall the driver and downloaded a new because it seems strange to be the issue, after working for 3 years and all of a sudden it stops. you are the experts, so I'll gladly do if you say.

  current driver is manufactor (IDT high definition...)

  Thank you in advance.

  Another test, that you can run is ePSA Audio Quick Check. Note that not all ePSA and ePSA models do not all control by Audio fast. If you do not then just fail the color bar test as described in the FAQ. If you hear tones in the two speakers at the trials then the speaker itself is good and another part is the cause of the problem, probably the socket for headphones, since you know the audio working properly up to this day.

  If you hear only tones in one speaker and the other speaker is confirmed then failing or has a bad connection.

  The final test you can do is to perform a System Recovery. If it's a software problem then recovery will fix the problem and if it is material, then it will be no and hardware will be confirmed as the source of the problem. But no point in doing so, if only one speaker is heard in the previous test...

  icecoldnine

  I do not uninstall the driver and downloaded a new because it seems strange to be the issue, after working for 3 years and all of a sudden it stops.

  You need not to do because you tried the native driver which served the same purpose. A simple re-installation of the audio driver (no download) is that your settings will be lost - in other words, the default configuration is restored thus exclude a problem of configuration, such as defined as mono in the sound properties.

  

  If you want to check this, open the playback of the sound properties, right click on the speaker/headphones, select Properties, click the levels tab, click the Balance button. It does not matter how cursors are defined so that they are both the same level of the dB.

  Download a new copy of the pilot aims to eliminate corruption from the existing driver. Sometimes, they stop everything works correctly.

• Traffic permitted only one-way for VPN-connected computers

  Hello

  I currently have an ASA 5505.  I put up as a remote SSL VPN access. My computers can connect to the VPN very well.  They just cannot access the internal network (192.168.250.0).  They cannot ping the inside interface of the ASA, nor any of the machines.  It seems that all traffic is blocked for them.  The strange thing is that when someone is connected to the VPN, I can ping this ASA VPN connection machine and other machines inside the LAN.  It seems that the traffic allows only one way.  I messed up with ACL with nothing doesn't.  Any suggestions please?

  Pool DHCP-192.168.250.20 - 50--> for LAN

  Pool VPN: 192.168.250.100 and 192.168.250.101

  Outside interface to get the modem DHCP

  The inside interface: 192.168.1.1

  Courses Running Config:

  : Saved

  :

  ASA Version 8.2 (5)

  !

  hostname HardmanASA

  activate the password # encrypted

  passwd # encrypted

  names of

  !

  interface Ethernet0/0

  switchport access vlan 20

  !

  interface Ethernet0/1

  switchport access vlan 10

  !

  interface Ethernet0/2

  switchport access vlan 10

  !

  interface Ethernet0/3

  Shutdown

  !

  interface Ethernet0/4

  Shutdown

  !

  interface Ethernet0/5

  Shutdown

  !

  interface Ethernet0/6

  Shutdown

  !

  interface Ethernet0/7

  switchport access vlan 10

  !

  interface Vlan1

  No nameif

  no level of security

  no ip address

  !

  interface Vlan10

  nameif inside

  security-level 100

  IP 192.168.250.1 255.255.255.0

  !

  interface Vlan20

  nameif outside

  security-level 0

  IP address dhcp setroute

  !

  passive FTP mode

  DNS lookup field inside

  DNS domain-lookup outside

  pager lines 24

  Within 1500 MTU

  Outside 1500 MTU

  mask 192.168.250.100 - 192.168.250.101 255.255.255.0 IP local pool VPN_Pool

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global interface 10 (external)

  NAT (inside) 10 192.168.250.0 255.255.255.0

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  the ssh LOCAL console AAA authentication

  Enable http server

  http 192.168.250.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  Telnet timeout 5

  SSH 192.168.250.0 255.255.255.0 inside

  SSH timeout 5

  SSH version 2

  Console timeout 0

  dhcpd dns 8.8.8.8

  !

  dhcpd address 192.168.250.20 - 192.168.250.50 inside

  dhcpd allow inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  allow outside

  SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image

  SVC disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2 image

  Picture disk0:/anyconnect-linux-2.5.2014-k9.pkg 3 SVC

  enable SVC

  tunnel-group-list activate

  attributes of Group Policy DfltGrpPolicy

  value of server DNS 8.8.8.8

  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

  tunnel-group AnyConnect type remote access

  tunnel-group AnyConnect General attributes

  address pool VPN_Pool

  tunnel-group AnyConnect webvpn-attributes

  enable AnyConnect group-alias

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  Review the ip options

  inspect the netbios

  inspect the rsh

  inspect the rtsp

  inspect the skinny

  inspect esmtp

  inspect sqlnet

  inspect sunrpc

  inspect the tftp

  inspect the sip

  inspect xdmcp

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  call-home

  Profile of CiscoTAC-1

  no active account

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory

  monthly periodicals to subscribe to alert-group configuration

  daily periodic subscribe to alert-group telemetry

  Cryptochecksum:30fadff4b400e42e73e17167828e046f

  : end

  Hello

  No worries

  As we change the config I would do as well as possible.

  First, it is strongly recommended to use a different range of IP addresses for VPN clients and the internal network

  No VPN_Pool 192.168.250.100 - 192.168.250.101 255.255.255.0 ip local pool mask

  mask 192.168.251.100 - 192.168.251.101 255.255.255.0 IP local pool VPN_Pool

  NAT_0 ip 192.168.250.0 access list allow 255.255.255.0 192.168.251.0 255.255.255.0

  NAT (inside) 0-list of access NAT_0

  Then give it a try and it work note this post hehe

• Get only one line for each type of a column

  Hello!
  I have a little problem.
  
  I have a table with 10 columns. One of them has repeated values. My goal is to get all the lines with this column only once for each values he holds.
  
  Ex:
  
  Col1 Col2 Col3
  A A A A
  B B B
  C A C
  D C D
  
  
  Column 2 has repeated values. My goal is to get:
  
  A A A A
  B B B
  D C D
  
  Only once each value in column 2.
  
  Thank you guys! ;)

  SQL>  CREATE TABLE Tbl (col1 VARCHAR2(1),col2 VARCHAR2(1),col3 VARCHAR2(1));
  
  Table created.
  
  SQL> INSERT INTO Tbl VALUES ('A','A','A');
  
  1 row created.
  
  SQL>              INSERT INTO Tbl VALUES ('B','B','B');
  
  1 row created.
  
  SQL>              INSERT INTO Tbl VALUES ('C','A','C');
  
  1 row created.
  
  SQL>              INSERT INTO Tbl VALUES ('D','C','D');
  
  1 row created.
  
  SQL> commit;
  
  Commit complete.
  
  SQL> SELECT * FROM tbl t1
    2  WHERE
    3  rowid=(SELECT min(rowid)
    4         FROM tbl t2
    5         WHERE t1.col2=t2.col2);
  
  C C C
  - - -
  A A A
  B B B
  D C D
  
  SQL> SELECT * FROM tbl t1
    2  WHERE
    3  rowid=(SELECT max(rowid)
    4         FROM tbl t2
    5         WHERE t1.col2=t2.col2);
  
  C C C
  - - -
  B B B
  C A C
  D C D
  

  Published by: Johan August 3, 2010 01:31

• One of the pages of my site will not display the Amazon links for the books that I sell. Only one book, wiich isn't on Amazon screens on the page. On Internet Explorer, display all my books. Why?

  Since the conversion of my site to the 'Recommended reading' page of WordPress does not display the book, I have listed this link to Amazon. Only one book associated with another Web poster site, but not Amazon Books.
  This does not happen on Internet Explorer. I asked this question last week, but received no response.
  Can you help me? Go to: www.transitionexecs.com and click on "Bibliography" to see what I mean.

  You have ad-blocking software?

  These links have ad in the url that may trigger such software.

  See:

  • http://KB.mozillazine.org/Images_or_animations_do_not_load

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• I pay for adobe cannot open soft, monthly cc only one possibility for a month after the locking of all the?

  I pay for monthly cc cannot open soft, adobe that one possibility for a month after all locked?

  Hi Noel, please try the steps mentioned below.

  1 disconnect and reconnect to creative cloud

  • https://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html
  • https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  2 CC asking serial number

  • https://helpx.Adobe.com/creative-cloud/KB/CCM-prompt-serial-number.html

  3 CC back unexpectedly to the trial

  • https://helpx.Adobe.com/Creative-Suite/KB/trial--1-launch.html
  • Creative products of cloud back to trial after upgrading to Mac OS X 10.7.4 | CCM

  Let us know if any links are useful.

  Atul_Saini

• I want only one application for now

  I have vascular Adobe Creative Cloud and want only an app for now which is Photoshop... I accidentally installed Lightroom, Bridge CC, Exchange Panel, Extendscript toolkit, extensions, touch app creative cloud plugins Manager and want to uninstall these applications until I have a full understanding of the creative cloud.

  I pay monthly membership and do not want to uninstall the creative cloud.

  Please advise on how to uninstall these other applications.

  Thank you.

  HI Margaret,.

  Please use the cleanup tool to remove the application you want to uninstall:

  http://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Choose the best option based on your decision.

  Kind regards

  Baudier