Ontvang en question clean
Beste mensen
Hotel jullie me helpen want ik kan said moment niet ook niet versturen post Français
Wat moet ik doen?
m, n email is *.
Jullie willen er daar bij helpen?
goede groeten meeting? !! Edwin
< personal information under the direction of the host >
You should really put your email address on a public forum like this, where it can be harvested by a scammer. I asked that the guests change it for your protection.
Tags: Mac OS & System Software
Similar Questions
-
Satellite L770 itself turns off
Hi all on the forum,
I hope someone can shed some light on a question that I'm going to...
My L770 older only a few months and until recently, was a fine artist - fast, flexible and reliable.
Until recently, it is so now, she turns to what appears to be random intervals from the initial start up - anywhere from a few minutes or even several hours.
There will be moments where I work away, usually just an email or a spreadsheet, maybe with music in the background, and then... The screen is just COMPLETELY EMPTY and all the indicators show that its execution is no longer just the electric lights and the battery stays on...
If I try an immediate restart it will be more often unsuccessful, often requiring five or six attempts, where the computer starts, perhaps gets to the password screen or sometimes actually charge the screeen office and then... It will go down new... Although actually once to execution and moved again it run for another few hours.
Sometimes, on reboot, I get a blue screen with one or two messages that are:
(1) stop: C000021a (ftal system error)
start a status of 0 x 00000001 (0XC 0000001, 0 X 00100600)or
(2) 0X000000f4 (0 x 00000003, 0X89A2ECF0, 0X8DC441E0, 0 x 8Dc4434C)
I tried to restore to an hour earlier, tried with the charger turned off and just running on battery, it makes no difference. I do not run all programs requiring a large amount of resources, I have really slot use the capacity of this machine.
I mention this because I have read it could be a heat problem, so I downloaded a base temperature recorder and that means stay casual to 91 ° C which has me a bit surprised, but I don't know what would be considered critical AND the more usual time for this is to happen in the early hours of the morning when nothing is really happening just standby... I could mention also that well that I travel a lot by plane between my work in Australia and my home in the North of the Thailand that the computer usually works in an air-conditioned room...
Any help would be appreciated.
Kind regards
Victor.
Hello
91 ° C is really high temperature, and I think that the laptop stops automatically due to high temperature. Generally, this is necessary to prevent material damage.
Question: clean the cooling fans in the past?
Dust and debris that can affect cooling performance module and air could not circulate properly.I clean my fans from time to time with a jet of compressed air. Usually, it's good enough to get the dust removed
Recommend to do the same and to test the functionality of s for laptop. -
Qosmio X 500 - 10U crashes without reason
Before starting to explain the problem, some information on my laptop:
Purchase date: 12/2009
CPU: i7 Q720
Memory: 8 GB: 2 x 4 GB (expand after purchase)
Hard drive: 1 TB (expand after purchase)
Graphics card: Nvidia Geforce GTS 250 M
Operating system: Windows 8.1 companyFor 6 weeks, I have the problem, my laptop crashes without reason.
It hangs only in the browser (checked with chrome, firefox and internet explorer, always the same).
It crashes on sites with content video (youtube in particular, not quickly, but if I open multiple tabs with videos) and if I opened several tabs another.
It weighs between 1-5 hours after using the browser (flash player is on the latest version).I do a forced departure to use the laptop again.
It does not crash if I play games, convert videos, etc.
Then things that highlight the laptop more surfing on the internet!While it crashes, I can move the mouse, but cannot open anything.
If I look in the Task Manager, I see that CPU and memory work, but the use of the hard drive is 100% and it remains at this value, all the time.Although the drive hard ist at 100%, all the processes under it have 0%. I can't see it, if a program is the cause. The temperature of the CPU (40-60 ° C) and hard drive (35-38 ° C) is OK.
So I read about the values of SMART with two different programs:
[HD Tune Pro | http://www.directupload.net/file/d/3563/xorgtm8z_jpg.htm] and [GSmartControl | http://www.directupload.net/file/d/3563/ce54l6jq_jpg.htm]The values on the Calibration Retry Count, sector number reallocated, which are marked with warning and pre-defaillance if criticism which can cause a hard disk crash?
The hard drive may be the problem?
I've still warranty on this subject. Should I contact Samsung and send it?
That would bring something?I think about to replace the hard drive with the samsung 840 Evo SSD, but if the hard drive is not the problem, I would have spent money for nothing
What I checked again:
-format and re-install: same question
-check the memory with memtest86 + 6 hours: impeccable and no crashes during this time!
-checked for viruses with avast at startup (with recovery CD): impeccable and always the same question
-replace a MEMORY: same question
-clean the old thermal grease and renew: temperatures decline a bit, but same problemI think that the problem is caused by the hard drive, but I'm not sure.
What do you think?What can be the reason for my problem?
I would be grateful all the lawyer.Post edited by: mehkay
> It crashes only in the browser
> It crashes on sites with content video (youtube in particular, not quickly, but if I open multiple tabs with videos) and if I opened several tabs another.Maybe there are some conflicts between modules installed in browser. How about you, the security settings of the firewall or antivirus? Check if temporal deactivation could improve navigation on the internet?
If you think that the problem comes from the HARD drive, I would recommend you replace it with an SSD. I did it in my book even if the HARD drive was OK. I replaced the HARD drive with an SSD and the improvement of the performance is really great!
By the way: I now use the HARD drive as external 2.5 USB enclosure HARD disk. It's quite good for backups and other stuff.
-
I spent hours on web sites looking for advice clean my iMac - they were all dead ends. I send a question to this 'Community' first, but must have done it badly because there was no trace of it. I now have the beach on this computer ball effect. Are there places I can delete cookies etc to help out? Thank you for your help.
horse8905
Don't know what's happening, you do not give a lot of information, but if you have the constant beachballing (spinning wait cursor), which could mean that the hard drive is dying.
Open Console.app in Applications > utilities. Filter, called "String Matching," right, high enter "I/o" without the quotes. What happens when you do this?
-
Mail question: I want to remove my archived email (10, 000 ~) because I want to clean my iMac and make it more effective. Does anyone know if the removal of archive e-mail will leave my Inbox and saved intact E-mail or anything that doesn't fade too?
Who is your e-mail provider?
-
Question seeks to clean install 10 Windows on the drive of the merger. El Capitan.
Problem: try a clean install of Windows 10 via the Boot Camp Assistant on an iMac 27 inches (Late2013) with 10.11.4 installs hours (more than 8 hours) and then failed to install Boot Camp updates. Essentially installation take much long than normal and cannot install updates of the Apple software or create normally start Windows Boot Camp 10.
Background: After problems of slowing down after upgrading to 10.11.4 (with improved Bootcamp Windows 10) who had previously worked fine for 10 months, to the point of a start of OS X time, I decided to do a clean install of my iMac with Fusion 3 to disk.
As I was unable to remove the partition from Boot Camp through BCA because of his holding always at the same load, I used Internet recovery and reset the Fusion drive. This then required me to repair the partition of Fusion by car through THE "fix" option which seems to work very well. And reinstalled OS X 10.11.4 which works fine now (delays etc..)
Try using BCA to create a new partition Boot Camp and a clean Windows 10 install after downloading an image of disk W10 directly from Microsoft (Win10_1511_1_English_x64), BCA by downloading software updates and by selecting the desired partition, it began to restart and initialize the installation. However the whole process has been very slow, each step takes much longer than usual, to progress. Leave for hours rest a blank screen or with a circle of rotation.
I tried with another stick USB 3 and also a USB 2 stick, but none has made a difference.
In the last attempt, I left running overnight and after 8-9 hours, he finally reaches the top of desktop Windows 10 and the update of Apple Bootcamp starts to load updates. However, he just hung and even after 2 hours, nothing was. Reboot and try once again has been the same.
After that I tried to create a Windows Installer via BCA 8.0 however it gives just a TPG error when you try to select the drive (due to el Capitan I guess?)
After four days of efforts, I'm a loser on how to get the Windows 10 on the Boot Camp partition. I can't even install W8 and upgrade due to the error of TPG.
Any help or suggestions how to proceed with the diagnostic / resolution of the problem would be appreciated.
Details:
System: iMac (27 inch, end of 2013), 3.4 GHz Intel Core i5, 16 GB 1600 MHz DDR3, NVIDIA GeForce GTX 780 M 4096 MB, OS X 10.11.4
- Nothing other than the keyboard and mouse attached via the USB ports, as well as the key USB of BCA. No other attached devices.
- Reset memory NVRAM, SMC and ran more than once disk utility. No problem not reported. Ran NVRAM reset before each attempt.
- At ran EtreCheck report which seemed OK.
- Verification of diagnosis ran who is childless.
A detail I noticed after the merger by car there are now two Macintosh HD images when you use boot option. One previously. Are named "Macintosh HD" and "Macintosh HD2". I remember being Yosemite simultaneously in three, but which has been fixed in an update.
In addition, it seems that no recovery partition. Cmd + R lance Internet recovery.
Distill the results (the Boot Camp partition removed):
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 121,3 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_CoreStorage GB internal drive 121.0 disk0s2
3: disk0s3 Apple_Boot Boot OS X 134,2 MB
/ dev/disk2 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * 3.0 to disk2
1: disk2s1 NO NAME 209.7 MB EFI
2: disk2s2 Apple_CoreStorage TB 3.0 drive internal
3: disk2s4 Apple_Boot Boot OS X 134,2 MB
/ dev/disk3 (internal, virtual):
#: NAME SIZE TYPE IDENTIFIER
0: Apple_HFS Macintosh HD + 3.1 TB disk3
Logical volume on disk0s2, disk2s2
7BE1F343-ACBE-4144-BF86-C838BE1E49D4
Fusion unencrypted drive
iMac - simon: ~ list of cs simon$ diskutil
CoreStorage groups of logical volumes (1 found)
|
+ Logical Volume - Group CA0B8D0A-6315-4E85-B313-52AB509473F2
=========================================================
Name: Internal drive
Status: online
Dimensions: 3121237860352 B (3.1 TB)
Free space: 0 (0 B) B
|
+-Physical volume 5E75EE74-EE1F-4FCB-A0C5-9ED5517FEB93
| ----------------------------------------------------
| Index: 0
| Disc: disk0s2
| Status: online
| Dimensions: 120988852224 B (121.0 GB)
|
+-Physical volume 91D639D6-634E-47C1-AFE5-616CE12E71E0
| ----------------------------------------------------
| Index: 1
| Disc: disk2s2
| Status: online
| Dimensions: 3000249008128 B (3.0 to)
|
+--> Logical volume family EE9934AC-F3CB-4101-ADB6-576F4371B4B9
----------------------------------------------------------
Encryption type: no
|
+--> Logical volume 7BE1F343-ACBE-4144-BF86-C838BE1E49D4
---------------------------------------------------
Disc: disk3
Status: online
Size (Total): 3106705375232 B (3.1 TB)
Reversible: no
Name: Macintosh HD
Volume name: Macintosh HD
Content indicator: Apple_HFS
LVG Type: Fusion, sparse
Summary:
Q1: Should it take 4 + hours to install Windows 10 via BCA?
Q2: Al must ultimately be so slow when initially W10 desktop?
Q3; What I do once I arrive at the office of W10 but it automatically updates the graphics driver as BC update is simply suspended for centuries and get a working driver to restart at least W10?
Q4: is there a problem with the disk HARD the Drive of Fusion that is causing all this delay and slow install / boot? ON the clean install OS X 10.11.4 it is back to be fast as usual and all tests show things are OK but W10 goes on the part of the HARD drive. No way to verify this beyond diagnosis or Etrecheck?
Q5: Y at - it no problem with the GPT / MBR that may be causing the delay etc. ?
Q6: How can I use my existing WindowsImageBackup backup from the previous W10 with the BCA install usb drive or how to create a USB stick otherwise recovery disk with my other single Mac have W7?
Q7: How can I install W8 as I once did on Yosemite, via el Capitan without a mistake to TPG on selection of disc?
Details:
Day 5. Attempt at 6.
Partition Boot Camp delete and try again install via BCA. First question, is that when the startup it goes to a blank black screen. For a time nothing left. Reset then using alt to select windows training results in almost instantaneous startup of the BCA message created and the beginning of the installation.
4 1/2 hours from start of Windows 10 initial signature window.
Then the second question. One to reach the Boot Camp update Office tries to start and install the drivers. Allows you to "list files...". "stage then sits at the bar about 5% green for 1 to 2 hours and does nothing. All actions in the Office of the W10 takes ages.
In the meantime, auto update of the W10 appears a message saying that the updated graphics drivers as one of the few messages or actions during this period. Looks like Nvidia install with the entire package of experience (unwanted) etc. and very probably not the correct gpu driver.
Finally deciding to cancel the installation of BC by killing the Setup.exe process. Then copy Boot camp install files on the desktop. Lasts 30 minutes to copy. Run again and this time, although taking 15-20 minutes to download and install later with the success message.
Check the graphic driver it shows a yellow exclamation mark, so the following Microsoft instructions I use the uninstall option via the device and then Manager (slowly) come on board to load and download the latest Nvidia driver on their site for the GTX 780 M for 64-bit W10 etc. The same thing that I had used previously. Slow with running the Nvidia Setup program again, but eventually it works only to say that he could not install as unrecognized graphics device...
He ends up with Microsoft PnP driver so it's at least sufficient start and run it again BC of the figure updates as all other drivers have been installed. To restart, but I get an error of K-Mode that is most likely related to this driver graphic and not possible to start in the new W10 Boot Camp partition after 7 hours.
I have a picture of W10 backup recovery (WindowsImageBackup) I've had in a few weeks, but it will not install bet for the installed W10. I try with the ACO created the USB windows but can't seem to get a way to get into recovery mode and to get the menu to install it. I don't have a way to create a USB W10 recovery key now because my other Mac has just installed W7.
Finally I tried to count a reset of the Recovery boot up option but it seems that it will take longer to start.
I also went to the recovery and selected Boot Mode safe, but it opens on an empty black window and he's here doing nothing.
Looks like I'll have to restart on via BCA and reinstall and try and solve the problem of graphics in order to install driver updates from BC and restart to W10 and hope that with the drivers, it returns to the operation and the normal starting time. Then update the gpu driver.
I used and installed Boot Camp several times with over the years including previously an upgrade of W8.1 > W10 I used for over 6 months without problem. I've never known these installation very long or ice once in Windows even for the initial start upward.
For any help or suggestion would be appreciated, and this seemingly simple process has now expanded to five days.
-
Free Windows 7 Upgrade Clean install questions
Hi, I have recently buy a Mini 5101 it comes with XP Pro and Vista Business... I currently have Vista Business installed on it. I wonder about the process of upgrading to windows 7. On the free upgrade Web site it is said that the operating system can be upgraded to windows 7, according to the weather, I have vista (upgrade straigh) or xp (must be a stable cleaning). Now, my question is can I perform a clean installation with this upgrade? I know that normally you can perform a clean install via the insertion of the disc of the previous operating system media during installation, but as the Min 5101 is a netbook (no cd drive) I will probably install it via a USB key. It is very important for me to have a clean install.
On the upgrade Web site, it says that if you are using XP pro, you must perform a clean installation. It would be better for me to install XP now order the update, and then install Vista so that I can get the version that will allow me to perform a clean installation - or I'd get the same disc anyway?
I know the installation disc doesn't have not yet been outside and not so should know the process entirely. Kind of hope that someone will have knowledge on this subject.
The installation media will allow you to perform a clean installation 'upgrade' using product key of the current operating system during installation. This allows him to check that you are upgrading from a previous version of Windows.
-
Whenever I start my MacPro, 2 screens come in saying that I have to clean my Pro because there are 700 questions. They want $40 to clean the MacPro? How to stop these 2 screens of popping up whenever I start it? Or should I really do it? Has anyone here ever used Mackeeper? They are not associated with Apple
I would highly recommend against installing MacKeeper. It is much better to cause problems then he resolve them.
Pop - up that claim that you have problems on your Mac is scams. You don't want to call them or allow them to have access to your Mac.
If this is the case frequently you probably have the adware installed on your Mac. Please download and install https://www.malwarebytes.org to rid your Mac of adware that is infesting it.
-
question about cleaning the sensor of the A57
Dear community of Sony,
I have several questions about the cleaning of the sensor of the A57.
Recently, I noticed several dark specs appearing on images when shooting at low opening (F20, F22), especially when there are high for them (like the sky in a landscape photo) contrast. To my knowledge, I've categorized as possible of dust on the sensor. I have read the section of the manual about cleaning the sensor and followed the procedure. However, the problem remained. I have previous experience with cleaning of the more resistant the probe of a Sony NEX dust particles, so I applied it to the A57. I used the specialized sensor cleaning tools combining two parts kit - wet and dry. Noted little dust on translucent mirror as well, so I cleaned up afterwards. Later, I considered this mirror could have some specialized coatings.
So my first question is: should I have done some permanent damage the mirror or the sensors? Currently, the camera works OK, although some features of dust still remain. It seems that I had pushed some of them to the edges of the sensor.
I'm not so happy with the tool that I used. I'm thinking about this one for a more thorough cleaning:
http://www.digitaltoyshop.co.UK/Eyelead_sensor_cleaning_kit_SCK-1_Sony_Alpha_A57_t2836_6789
It is marketed as a tool for A57. Should I use it?
Thank you in advance?
Best regards Angel Marinov
PS: I'm really happy with my Sony A57 and the NEX. They made me a fan of Sony. So, I want to use this topic to also say thank you to the developers of Sony.
Hello Angel!
Read the following steps carefully and let us know if you have any other questions.
-
HP2600N Cyan question - already tried to clean the mirrors
Hi evryone,
My 2600N has been Cyan misprint in images-even a picture of a medium blue sky out essentially sepia toned, greens are yellow and violet are red. Levels of cyan are 42%, when I print a sheet of supply/test that the cyan appears, but very thirsty. I searched and followed a tutorial to open it and clean the mirrors/lenses with a q-tip. It wasn't whether dust on the components, so I don't think that's the question, but I wiped them anyway. I also read that when the problem is caused by the accumulation of dust, Cyan usually would not be the first color to go. After reassembling, the problem remains. Any suggestions at all?
Thank you!
Ian
To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.
I hope this helps!
-
Question of cleaning memory of blackBerry Smartphones
Hi all
While not not new to BB, I'm new on my Storm 9530. That being said, I have a question about the memory cleaning option on my BB Storm. Should I allow it and let it run all the time or should I just use if necessary. Any help will be appreciated. Thank you
I leave it on on my Storm. I know that the manual inside the applications folder can actually reduce the amount of RAM free. I had 32MB or so free, ran the Manual vacuum and ended up with about 28 MB
. -
Hello
Phone: 8220 (from Tmobile) BB it says Tmobile on the phone.
Provider: AT & T
info from the inside of the battery compartment;
PRD-004-17539 BlackBerry 8220 RBY41GW
IC:2503 A-RBY40GW
BT MAC: 00 23 7A 75 79 A5
I did a lot of research, and I came to the conclusion that my BB is stuck in reset mode. Actually have a question and I also just want some reassurance.
So first of all, my BB started resets itself automatically, as he has done before, (turns off and restarts, usually in a few minutes, I'm good to go). Well this time that he did not return to a usable state.
What he does; The Red led lights up for about 3 seconds, then turns off. Then, I get a white screen with a small clock top for a few seconds. It's all just that, again and again.
I removed the battery,... has not fixed the problem.
I tried holding alt, cap key (also #) and delete. .. do not solve the problem.
So, I just want to know if a 'clean Reload' is the correct step.
Second, here's the question I have at & t service. The BB I use is tmobile. So I was wondering, since I will be clean/clear the phone, download software device from at & t instead of the Tmobile device software.
All the notes I've read say to contact your service provider, or visit their site to download the software for the device of BB.
Any help will be appreciated. Also, I would like to know if I need to provide more information about my phone.
Thank you
Changed to delete personal information
You will need to wipe the appliance completely first.
http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
Once the camera has a white screen and the "507" error you can load the new OS. It makes no difference what carrier download you operating system. It is best to download the latest version of the device regardless of the carrier he published. Here is a link to the most recent instructions including how to reload.
-
I'm afraid that my computer does not run much more. I bet on the defrag and system cleaning I have on my computer, but I think I should invest in one or more of these registry cleaning software discs. Is anyone here know of a reliable and relatively inexpensive? Or, if not, does anyone know of a freeware type? (These things exceed my ability to afford it since I'm already back Sec Soc limited.) Thank you!
You don't need a registry cleaner:
Cleaning the registry:
Read http://www.edbott.com/weblog/2005/04/why-i-don ' t-use-Registry-cleaners/and http://aumha.net/viewtopic.php?t=28099 and
I moved your question under the heading performance and Maintenance of the section virus and malware. Given further details about your problems, someone should be able to advise you on ways to improve performance.
-steve
-
Preinstallation cleaning question
Version 2.18. We are runing the step of configuration to do on ' 9.1 - apply patch 7303029'.»» The text of the wizard for this step:
.
«Before you apply the 7303029, if you have applied another patch previously in mode preinstall and not intended to merge with 12.1.1 upgrade driver u6678700.drv, clean up the directory $APPL_TOP/admin / $TWO_TASK/preinstall after taking the backup of the current directory.»
.
' This step will download . patch 7303029 and clean up the preinstallation directory so that only 7303029 rest. He will also check that the u67780700.drv driver is in the location OK and ready to merge. »
.
By examining the script ad34009s.sh, it shows that all the code that installs no matter what folder content preinstallation in a backup folder have been deleted (17 December 2010), the text of which will make the step can be misleading.
.
Question: We have applied 15 financials patches in mode preinstall on the step "Check critical fixes to pre-upgrade for financial services" and all of these drivers are located in our folder of preinstallation. Should we leave these in the preinstall file or not? Thank you!Yes - I had development remove the cleanup so that it would remove all financial patches preinstalled - I fixed text so that it is not misleading. Please leave all financial patches preinstalled in the preinstallation directory and they will all get merged into the new driver.
Thank you
Dave
-
Questions about the clean Win 8 instalation on Satellite U840 - 10 M
Hello
I'll do a clean install of win8 in my laptop. However, I want to ask 2 things:
1 - is the SRS Sound driver available for 8?
2. for purposes of formatting, I know I will need to put the hard disk usb and load drivers during the initial phase of win8 install, right? otherwise, hard drive will not be displayed in the list... right? And. What partitions?
2.1 HARD drive - I won't touch in 14.29 GB Partition, because it is toshiba recovery image right?
2.2 disk - other partitions I'll delete and create new ones for win8.
2.3 SSD - do I need to configure anything for Cache SSD? (ie: intel Center Quick config?) or win8 it automatically detects and install it? I'm afraid of this part, because I've seen users trying to config SSD intel quick Center hollow and the end spoil the SSD = solution was only of RMA.
Thank you
> 1 - is the SRS Sound driver available for 8?
Hmm have you visited the page of the Toshiba UE driver and checked this?
I found this driver: [SRS Sound Driver 1.12.5000 Win 8 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 198 & selProduct = 7520 & selSh ortMod = null & language = 13 & selOS = 42 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 3 & ID = 84611 & OSI D = 42 & driverLanguage = 13]> 2 - for formatting of the purpose, I know that I will need to put the hard disk usb and load drivers during the initial phase of win8 install, right? otherwise, hard drive will not be displayed in the list... right? And. What partitions?
You can add the Intel RAID driver in case the HARD drive wouldn't show. Read this
http://APS2.toshiba-tro.de/KB0/TSB2903E20000R01.htm> 2.1 HARD drive - I won't touch in 14.29 GB Partition, because it is toshiba recovery image right?
Recovery image does not work after installing Win 8. Then create recovery disk before installing Win 8> 2.2 HDD - other partitions I'll delete and create new ones for win8.
You choose the partition where the Windows 8 would be installed. Check above document.> 2.3 SSD - do I need to configure anything for SSD Cache? (ie: intel Center Quick config?) or win8 it automatically detects and install it? I'm afraid of this part, because I've seen users trying to config SSD intel quick Center hollow and the end spoil the SSD = solution was only of RMA.
I think that you don t need to configure anything during the installation of Win 8.
Maybe you are looking for
-
Until a few days ago when I opened a file XML with Firefox, I see the content of the file appears with line breaks and ' < ' and ' / > ' and elements. Like this: fixed image in < typeOfResource > < / typeOfResource > <genre authority="marcgt">picture
-
My ipod Touch 5th generation will not connect to iTunes store? Why?
-
Satellite A100-049: games does not work well
I bought this new laptop the other day and it came with vista home premium. Everything is perfect, except that it's terrible to run the games! Some in such a way that my old laptop with sis650 chipset and 256 MB of ram was better. Im running games ar
-
I can blur a picture directly in FCPX edges?
I know that I can do in Photoshop and then load the photo in FCPX, but I was wondering if there is a way to do it directly in FCPX (in the sense that it can blur the edges of the dark background image)
-
Problem running Battlestations Pacific with Windows 7 Home Premium
I just buy Battlestations Pacific and tried to load it on my laptop ASUS G72GX under Windows 7 Home Premium. The game seems to load correctly, the shortcut will appear in the Games folder; However, when he tries to run the screen goes black, the cur