OOTB ExtAtt qualitative research - 2 Questions

Similar Questions

• Differences between archiving and off of a qualitative research within the Admin Data Toolbox.

  
  Hello

  Can you please let me know what could be the difference between archiving and the deactivation of the Qualitative research in data Admin Tool Kit.

  Thank you

  Rohini M

  When you idle or archive anything it is no longer available for selection.   The difference between inactive and the archives, it's inactive items still appear available for the fine items while searching of archive will not be.

  Allows so that you have the following to say:

  List A

  -Article 1

  -Article 2

  List items

  If you were to inactivate the point 1, end-users is more would see can be selected when you use the extended qualitative attribute.  However when they are looking for specifications based on the extended attribute, they would still be able to select 1 point, whereas they could find objects that this value was used. If you archive Item 1, end users should display it no longer available for selection from anywhere - including research.

  Lists

  If you were to inactive or archive the whole list, you would see is no longer available for selection when the establishment of a qualitative research of extended attributes.   I don't think that there's nowhere you can search for extended attributes by the list of research currently out of the box so that they would act similar.  Is there a place to find attributes extended by the search list and then he would follow the same rules as above.

• Research GREP question

  Hello all, I generally consider myself as quite convenient to the GREP, but this one I'm not sure. What I need is to be able to search for parts of a text and put them in a paragraph style, and then use more searches to narrow down these results.

  The text is composed of much documents and possibly in the sections an appendix and even a pregnant. each of them are separated by a point size and then a similar version of the same paragraph styles that exist in the text. in any case, what I need is to be able to clear any number of introductory research reaches the signifier of text indicating the section subordinated. Here is the idea for the annexes:

  (? < = ^ APPENDIX ~ b) (. + ~ b) +(?=^DOCUMENT)

  It works in both circumstances in the book however I think the culprit for breaking this research is the forced return and possible nonbreaking spaces. anyone knows how I can put in some type of if theres a return force ignore too type of situation.

  Thank you!

  Try changing the middle section to

  (.*~b)+

  I tried and I tried and it doesn't work... because I had a blank line in my text, which is not what your matches (one or more characters before the back...).

• Research Manager custom, caching of the «question»

  I have a custom research manager that is used on the attributes of qualitative research to provide a list of choices based on a SQL, other PLM objects. It works fine in that it shows the type of choice in the pop-up selection dialog box and fills the value of the attribute correctly when the user selects a choice and later when they consult the specification outside editing mode. The question that I am running is that, even if the result of changes to the search query, the available choices in the dialog box pop up (and those who are already related to attribute values) reflect not the updated values since they are apparently put cached after the first use of research (call AllLookupItems). The new values will be displayed after an IIS reset.
  
  Y at - there a way to force the cache for this choice list refresh every time the pop-up dialogue box opens, and also when PLM retrieves values from existing attributes by using the custom search when the specification is viewed? Potential impact of performance of database hits are included, I was wondering if this is possible.
  
  I appreciate all advice, thank you.

  The app updates cached custom within our service of extended attribute values of research manager.
  You can schedule a query cache to cache group dump "Extended attributes / Custom Sections ' which I think will purge your cached values.

• XPS, a Microphone 27 catches almost no sound

  I had the XPS one 27 for about 4 months and the microphone has never worked.

  I tried to use the registration system through multiple applications and voice Skype conversations. No luck.  The saved files are of very poor quality (noise muffled, barely audible) and no partner of Skype (I tried with several people) were able to hear me other that a thud, inconsistent.

  It is imperative that my system has a microphone that works as I use it to record a qualitative research and hold business meetings.  This is the third question, I had with this machine (the first was a faulty PSU and the second is a squeaky/wobbly computer stand) and is not what I expect from a $2000.00 machine.

  Hi VictoriaDell,

  You can uninstall and update audio drivers by following the steps below:

  • Press Windows + X keyboard
  • Click on Control Panel
  • Click uninstall a program or programs and features
  • Uninstall the sound driver and restart the system
  • After the reboot, you can update the audio driver here
  • Follow the on-screen instructions and restart the computer when prompted

  If the problem persists, you can follow the steps below to enable the MIC boost:

  • Make sure that you are on the desktop screen. If you are on the start with tiles page, you can click tiles of Office to access the desktop mode.
  • Right click on the speaker icon to the lower right side of the taskbar in the notification area

  

  • Click on "recording devices".
  • A Sound windows appear on the screen a list of the recording devices

  

  • Make a right-click on the internal microphone (that you have posted in the screenshot)-> choose'Properties' -> make sure that the Microphone is set to 100 and see if the problem still occurs.

  

  • You can adjust the Microphone Boost to 10.0dB or 20.0dB and check if the record is better.

  I hope this helps. Please respond to the findings.

• Extended Configuration attributes

  Hello world

  I am currently working with extended attributes, according to the custom under the Admin module data. I want to know if there is a maximum number of values that can be assigned to an extended attribute of type 'Qualitative '.

  I have a list of 2 000 values to be assigned in an exnteded attribute, but I want to know if its possible to do it before you start this or is it a limitation of the system on how many values can support the system by the extended attribute.

  Thanks in advance.

  You should be able to have a qualitative research of extended attribute list that contains 2000 items.   I second comment by Beckie around not to use the drop-down list, style button or checkbox radio, certainly a tool unique shuttle selection or multiple selection.    As far as usability is concerned with this control, when you use a multi or a tool unique select shuttle and it reaches a configured threshold, a search box appears at the top of the control rather than display all possible selections.  I think that the amount configured out of the box is 500. We find users generally hit this sum out lists of the box such as allergens and additives so that some scopes attribute searches custom.  You can see a screenshot of this feature in the guide starting on page 2-6

  From the admin point of view, you have to manage a list this large using a qualitative research of type EA and create a "category".  You can create/manage this search category (custom list items) using our widget toolkit of Qualitative Research Configuration or a better approach uses our custom search web service record if this list came from another system.

  I hope this helps.  Let me know if you have any other questions.

  Kelly

• Clean install Windows 7 with UEFI in dv6-7215nr

  Hi, I would like to do a clean install of my HP dv6-7215nr Windows 7 Enterprise SP1 x 64 envy laptop.

  To this end, I have 3 questions to solve some installation issues.

  1. What are the steps to clean install Windows 7 SP1 Enterprise intact in UEFI mode?

  I tried to install Win 7 after the pre-requisites following:

  (a) not partitioned 200 GB free space on the disk (only 1 physical disk)

  (b) already installed Windows 8 files with UEFI

  (c) UEFI enabled

  (d) heritage disabled startup

  (e) secure boot disabled

  When I Boot in UEFI of CD/DVD, I can't switch to the Windows startup screen, it just hangs. What I am doing wrong? Is there any other prerequisites that I don't know?

  I tried to install UEFI with Legacy enabled Boot, and I installed win7 but I can't disable Legacy new Boot because Win7 boot and I want only the UEFI Boot and need for inheritance disabled.

  2. where can I download drivers for Windows 7 for my laptop?

  I found this topic:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/HP-envy-DV6-7210ei-downgrade-fr...

  They point to these drivers

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & dlc = in & lc = in & product = 5273735 & task = &

  I think I could use these drivers, but I need just in case where. I guess they should work as the product names are roughly similar (with mine).

  3. is it possible to Secure Boot with Windows 7 SP1?

  I have no research on this so far.

  Thanks for the help that someone in the community can give to me, it is not important all the problems that I have set in I can still do research on questions 2 and 3 and help others with my research if I can do it before a response. Any info you can give me will be too great.

  Carlos

  (1) ' secure Boot' must be DISABLED and 'Legacy Support' must be ENABLED to install Windows 7 and many other older operating systems. The bootable media must support UEFI boot to install on a GPT-partitioned drive.

  You let people with DISABILITIES 'Secure Boot' (and 'Legacy Support' ENABLED) once you have installed Windows 7. Changing these options causes Windows 7 to start is no longer.

  (2) the Windows 7 drivers on the CTO Entertainment Notebook PC drivers HP Pavilion dv7t-7000 page you referenced, will work on your computer.

  (3) it is not possible to install or use Windows 7 with "Secure Boot" ACTIVE.

  WARNING *.

  HP does not recommend installing Windows 7 on a consumer computer comes with Windows 8, and it will support the installation of Windows 7. HP cannot provide the drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You will need to DISABLE 'Secure Boot' and ENABLE 'Legacy Support' in the 'Configuration of the BIOS start-up secured' on the page parameters below, until you try to install Windows 7.

  

  In addition, as the hard drive is probably partitioned as TPG, you must start the computer by using the "UEFI - CD/DVD drive" or "UEFI - USB Flash drive" options in the boot menu "F9". If "UEFI - CD/DVD drive", "UEFI - USB Flash drive" or something to that effect does not exist in the start menu, please post a screenshot and/or make startup listed options.

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  If you have missing or unknown devices after installing the drivers, please post to the "Hardware ID" Device Manager (just the text string will do) to these devices as shown in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Loop - 8 victory

  I reinstall Windows 8 on a h8 desire - 1417c. After the initial load of the sequence ends, I get an error message ' the computer restarted unexpectedly or encountered an unexpected error. " Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and then restart the installation. "This error pops up at every attempt to load the OS. I can't find hardware problems. Any ideas where to start troubleshooting? Thank you.

  Hi rpletts,

  Happy to help you with your problem. Reinstall you it from the original installation disc or using recovery discs?

  I found some information while researching your question. Here is a link to a third party site that has a fix for this problem.

  http://heresjaken.com/the-computer-restarted-unexpectedly-or-encountered-an-unexpected-error-during-installation-of-Windows/

  Thank you

• Siri c. storage of voice memo

  What is the IOS Voice Memo app linked to Siri? There, I guess I mean, is voice memo data captured and stored in the same way that Siri controls are? I am researching this question with respect to the security and legal protection of confidential memos.

  Thanks in advance!

  Voice memos are not stored on the Apple servers. They are stored locally on the phone. If you save iCloud, they are stored. If you send them anywhere via the application Messages or e-mail, they, like everything else you send through the internet, are probably stored somewhere. But no, Apple has no reason to be interested in your voice memos. Siri is stored because it allows to improve the functioning of Siri.

• Presario CQ5110F: COMPAQ Presario CQ5110F adding a second hard drive and...

  Good so I took the lead when writing my original post on how to combine the two computers successfully.
  Not enough research, no question, just a little say aloud... Sorry about that.
  http://h30434.www3.HP.com/T5/desktop-hardware-and-upgrade-questions/HP-Pavilion-slimline-s3505f-amp-...

  I had little time today messing with both ' puters and discovered...
  They need a good cleaning and had.
  The noise of the Presario is indeed the fan on the radiator, it's just old and tired. Who cannot be strong in a music room; new fan may not be too expensive.
  So I decided the Presario is my starting point.

  I would add the hard drive of the Slimline as slave; they have different connectors tho.

  (1) if I just unplug the V2000 CD reader (that has the straight plugs) and use them to connect the second hard drive will I just lost my CD player? It is very good.
  (2) what parameters of rider (if any) do I need to have on each disc? Do not see outside the car Slimlines.

  I looked closer 2 slots for RAM and noticed that beside them there seems to be 2 places in addition to the Board of Directors, unused with no present holders plastic.

  (3) is it possible to add more slots and double the RAM? I would get 8 + GB and a 64-bit system end by ;~)

  Neither office seems to have the ability to run 2 monitors as is. No problem 29 "should do for now.
  Can't see a way to take the card out of the Slimline wireless and put it in the Presario. Internet not immediately necessary, hard connection cable always an option.

  All the other tips and advice on how to optimize my sytem are also welcome.
  Thank you for your time and helping an old guy handyman.
  See you soon!

  COMPAQ Presario CQ5110F (2008ish)
  Processor AMD Athlon X 2 7550 Dual Core 2.5 GHz = Socket: AM2 +.
  Card mother = Narra5 M2N68 - THE Chipset: NVIDIA GeForce 6150SE nForce 430 Socket: AM2 +.
  Memory RAM = 4 GB RAM DDR2 DIMM PC2-6400 MB/s
  = Video/graphic card nVidia GeForce 6150SE integrated graphics
  Sound/Audio = Audio integrated Realtek ALC888S
  Hard = 320 GB SATA 7200 RPM drive
  CD/DVD Player = DVD +/-R / RW 16 X SuperMulti SATA drive
  OS = Vista Edition Windows Home Premium SP1
  Power = 300w
  Case = Mid size 38cmHx17cmWx43cmL ATX

  Hard drives has no different connectors if they are both SATA specifications like other post indicated.

  There is no adjustment to make on hard disks of the rider SATAS. According to me, that one can think of the old school the IDE drives.

  ) If I just unplug the V2000 CD reader (that has the straight plugs) and use them to connect the second hard drive will I just lost my CD player? It is very good.

  The image below is a diagram for your motherboard. You have enough SATA ports to be used for the second and even a third hard drive.

  

  DDR2 memory modules can be a little difficult to source. The current generation of add-on memory is the DDR3 specification.

  Perform a Google or any search engine is your preference in the memory of the source by using the update of Compaq presario CQ5110F RAM as keywords.

• How to create two small screens on one monitor, to two search boxes different of rperform

  a need to display monitor and research 2 questions side by side almost of half of a screen at 2, as to split through the Middle so to speak... at the same time. to compare my results. Please help... it seems as if it should be pretty simple, but I'm stumpped. (sp)?  It's too late to worry the shell in my words. I hope youall are not too maticulas... hmmmm...

  I did it again!

  Hi Carolmorrow,

  ·         What version of the operating system is installed on the computer?

  If you use Windows 7, then you can use Snap to arrange windows side by side, which can be especially helpful when comparing two documents or when moving files from one place to the other.

  Arrange windows side by side on the desktop using snap

  http://Windows.Microsoft.com/en-us/Windows7/arrange-Windows-side-by-side-on-the-desktop-using-snap

  Hope this information helps.

• 5 d old or new rebel? Help please!

  Hello!

  Recently I did some research and question if I have to sell my old 5 d in Exchange for a new rebel (perhaps the t5i?).  I take lots of photos of animal shelter, but also photos of travel/landscape/tourist.  I played with the t5i the other night and it seems much faster and images seem to be very crisp and clear (on the LCD).  I don't know if it's a crazy idea.  I have not been in the freelance game in quite a few years so I'm a bit out of the loop when it comes to what is the best camera right now.  I can't afford an another 5 d upgrade to the mark ii, iii, or iv.

  I was hoping you all could give me some opinion.

  Thank you!

  I ended up finding many things through Adorama for offered a new t5i with the 18-135 lens, more pro-100 and accessories printer for $750 + no tax/shipping costs.  I really wanted a DSLR that was smaller than my 5 d with a built-in flash for the quick day trips and photos of the shelter.  Thank you all for your thoughts!

• Where my 3GS Iphone (version 4.0) Notes are stored on my PC under Windows XP?

  My iphone crashed and I have no chance to find these Notes from the standard Notes app that comes automatically with the iphone.  Prior to the last year they were (sort of) be copied in my gmail, but I changed my setting in my phone, and who has stopped.  On the eve of my iphone no longer works, I had done a backup on itunes.

  Thank you!

  Hey alancoqui,

  I get your situation, and I'm sorry to hear about this. If you are using only the standard notes app on the iPhone, I have herd and while researching your question that these notes will not sync on, it's just music, apps, text and contacts.
  If you use Outlook app so that they are accessible to you by logging into your outlook account.
  And I'm sorry to hear talk of apple responds don't quickly not to you, but since it is not a Microsoft product, we do not have a lot of resources on this topic.
  Sorry, I don't have better news, but I hope that was helpful.

• Envy D411-scanning multiple pages in a single document

  After much research and questions posted and a long discussion with Technical Support on the fact that, during the analysis of the documents in PDF format, it is either the icon or add another page available on the scan icon preview page, so that if you have a multiple-page document, you have to scan and save each worksheet individually, I discovered, today, in this case you scan the document to send/PDF, voila! -There is a button to add or remove Pages.  It seems to me, the button is in the wrong place and should be moved to or added to the option of regular analysis.  It also appears as if I choose a destination, not email, to save the document of several pages scanned in a folder rather than by e-mail.  Come on, HP, let's get with it!

  Hello

  Please, try this and let me know if this is useful:

  1. Open the HP software.
  2. Click Scan Photo Document.or.
  3. Select Save as PDF and verify that you check scanning see the preview.
  4. Set the resolution to 300 dpi or below and click on the scan button.

  I guess the resolution to save as PDF option set to a higher resolution and, therefore, the more the icon does not appear.

  Hope that helps,

  Shlomi

• installation on Linux

  http://S909.Photobucket.com/user/faruqsandi/slideshow/P4SD

  P4SD -?

  I have old P4SD motherboard.

  his work fine with windows, but I migrate to linux.

  The machine has been started LiveCD as well.

  But he can't boot linux installed. There is a message "Non system disk or disk error" appear.

  If I enter the Boot Menu, the choices available are:

  CD-ROM
  USB device

  Drive (C drive
  MBA v6.3.0 Slot 0510

  Is "hard drive (C"means that the operating system is Windows only?).

  How can I boot linux?

  I try to start Weakerthan 3.6 BETA

  Kind regards

  Faruq Sandi

  Hello faruqsandi,

  I saw your photos on your problem and wants help. After researching your question and having the same problem happen on my old HP tent system holder a Linux installation. I am lead to believe that the linux OS CD that you are using does not allow installation and if you are able to run the Windows operating system, the error "Non system disk or disk error" is not a problem with a hard drive:

  (More information: "Non system disk or disk error")

  ( http://support.hp.com/us-en/document/c00832290 )

  FIX - IT as follows:

  1.) make sure you are able to install the Linux cd on another system.

  3.) attempt the installation with another cd of Linux to check if the installation is successful.

  Not for you to click on the favorite for my help!