OPA-Siebel Integration - generation advantage Plan

Similar Questions

• Detailed description / material on Siebel - integration of the OPA

  Hello, I'm looking to get a detailed description / material on Siebel - integration of the OPA. Material which will help us & s tr to describe the interface between Siebel - OPA for the proposal. Thanks in advance!
  
  Jori

  Hi Jori

  The best source of detailed information on the OPA for Siebel connector (including samples and tutorials) is the documentation of the product itself.

  There will be a new version of the connector for Siebel released later this week, including the updated documentation with version 10 of OPA OPA. I suggest that you download connector for Siebel delivery v10.0 OPA and take a look on:
  1 OPA connector for Siebel v10.0 Setup Guide (PDF)
  2 connector OPA for v10.0 Siebel Developer Help (HTML)

  In the future, we also plan to make this information accessible via OTN and the OPN Competency Center.

  If you have any other questions, please post.

  See you soon

  Anthony

• Result not received takeover by OPA Siebel connector

  We use out of the box of OPA-Siebel connector for approval of application of guarantee in Siebel.
  
  The basis of rules of OPA was tested in OPM and we checked the results. He was placed in the server and determination.
  We have done the required mappings, outbound web services in Siebel configurations.
  
  However when we submit the warranty claim deposit (to which is related the basis of rules of the takeover), the approval at the level of the line is not getting approved.
  On the audit of the trace output file, we see no he had results of the OPA Siebel.
  
  Is there any installation fail us. How do we see the output xml that is generated to OPA?
  
  Concerning
  Aparna

  Hello

  I am not a specialist of connector but have some experience and might know what you are looking for. When we need to display the XMLs (from OPA to Siebel or vice versa), we get into Siebel under:

  Directors - motor integration > transaction log

  You can search for "OPA" in the column of the Interface and XML messages will be displayed in the message area below. If you don't see that maybe because the log levels are not quite high. Increase levels of newspaper in virtue:

  Directors - motor integration > Transaction Setup > Error Logging / handling > Message Log level

  I think the level that you want is '2 - non-transaction Message '.

  I hope this helps.

  -Patrick

• OPA Siebel connector and multi support multi-lingual

  Hi OPA Experts,

  We have a requirement that result of the OPA (validation text) must be complete multi language, if the connection of the user in "ENU" then OPA Siebel IO response should fill the results in "ENU", if the connection to the user in response 'CHS' OPA Siebel IO should fill in 'CHS '.

  Do we need to maintain separate for ENU and CHS modules? Please let me know. Thank you.

  Hi Moses,

  Sorry for the late reply.

  It was not possible to call a web service inbound from separate of the language/locale of the interview. However, we have recently produced a patch that should do exactly what you want.

  If you contact technical support, and describe what you want to do, they should be able to provide a patch. If you mention that you need the patch that was produced for the '3-7991604331-not able to implement OPA connector for Multilingual application' service, they should send you a patch that contains an updated version of the OPA 10.4.4 runtimes for Connector for Siebel and all the instructions you need.

  See you soon

  Frank

• Questions in OPA Siebel Connector upgrade to 10.3

  Hello
  
  We have improved OPA Siebel Connector upgrade to version 10.3 10.2. We have performed all the steps in the installation guide and deployed the 10.3 rulebases to tomcat apache (application server that we use).
  
  When we click the button 'Test smoke DS' or 'DS IO smoke Test', we get the following error:
  
  Error service call 'Policy Automation Server IO determination', 'AssessIO' method in the step "to call evaluate IO." (SBL-RPR-00162)
  HTTP request error when the "request submitting data SendHTTP ': 'State - 503 code' (SBL-EAI-04117)
  
  The port address of the service for the outbound web service "DeterminationServerIO" is:
  
  http://172.18.113.11:8080 / siebel-determinations-server/assessio/SOAP/AdminSmokeTestIO
  
  and for "DeterminationServer":
  http://172.18.113.11:8080/Siebel-determinations-Server/assess/SOAP/generic/10.0/AdminSmokeTest
  
  We can see the deployed rulebases (AdminSmokeTest and AdminSmokeTestIO) WSDL files in the following path:
  
  http://172.18.113.11:8080 / siebel-determinations-server.
  
  Also the buttons work correctly in the dedicated client, but it does not work for thin client.
  
  Waiting for reply!
  
  Thanks in advance!
  
  Kind regards
  ALIOU

  ALIOU.

  From the looks of the newspapers, it is call the correct URL and to return a 503 error. We know that the Service is running and works from a fat client.

  The only real differences between thin and thick clients should be the machine that demand comes from (Server siebel for the client, the client computer for the thick client), and the used .srf (thick client that uses its own .srf, lightweight client relies on the used by the Siebel server .srf.)

  1 there is something strange on the thin client application.
  -check the logs in Siebel determinations server to see if it is receiving the request and then return an error (unlikely)
  s ' ensure that the .srf which uses the Siebel server is up-to-date (customer copy heavy to the siebel server .srf).

  2. any security or a firewall preventing the application of the Siebel server.
  -see if you can contact Siebel determinations from the Siebel server server.

• OPA Siebel connector

  Hello
  
  We have developed a module using the OPM and now want to link with Siebel with Siebel OPA connector.
  The modules is complex and involves a number of entities, and there isn't many so alleged relationships.
  
  The OPA Siebel connector works very well with the given default modules. But to make it work with my base custom rules that all the changes I need to do?
  
  In addition, it will be very useful if you can share some link or source, which explains the basic process of mapping rules of the takeover to Siebel database.
  
  Thank you
  
  Published by: user13091883 on Sep 6, 2010 04:40

  Depending on how you want to use the modules, how you approach the OPA for Siebel connector can be very different. There are essentially two distinct meanings.

  * 1. Invoking Siebel rules and process the result *.

  This approach uses the server of determinations of OPA and relies on data sent by Siebel to the determinations of the server, with the answers referred to Siebel.

  It is based on a policy of automation mapping between Siebel business components, attributes, and relationships mapping to entities, attributes, and relationships in the modules.

  This scenario is always called from a script in Siebel (perhaps triggered from a button). The text must be written on the Siebel Connector feature is called and the response must be dealt with in the script.

  The main example of this is the AdminSmokeTest. By pressing the button 'Test smoke DS' called Siebel connector, which uses "AdminSmokeTest" mapping to collect information on the current employee record and send it to the server of determinations. The response is processed and the response (if the current record is the SADMIN user) is displayed in a message.

  Look at how it's done, use Siebel tools to look at the underlying script in the 'Policy of automation Smoke Test' applet.

  Also, you should take a look at the connector of the OPA for Siebel documentation, especially in the topics under 'Invoke the rules' and ' tutorial: citing rules with policy of automation connector for Siebel.

  * 2. With the help of determinations of Web to collect information and save it in Siebel *.

  This approach uses the OPA Web determinations to run an interview. It can be called from Siebel, or open them directly from a web browser, but a user following the interview process stated. When the user chooses to record the interview, the results are saved in Siebel.

  The data of the interview are recorded in a political component of specific Session of Automation management. When an interview is saved, you can intercept the workflow to perform additional functions.

  You need a mapping for this approach as well, but you need not necessarily to the mapping of all the entities and attributes of the modules of business, fields etc in the Siebel server components. The information collected during the interview are recorded in the political table Automation Session. The mapping in this case, is mainly used to start before any information from Siebel to the determinations of the Web.

  On the screen of the "politics of Smoke Test Automation", when you click on the button 'WD Smoke Test '.

  You should take a look at topics under "Citing Interviews" and perhaps "tutorial: seed Oracle Web determinations with data from Siebel.

• OPA with several Instances of Siebel integration

  (1) I have a Siebel CRM Instance development
  (2) decisions for the Dev Instance Server
  (3) OPA installed and configured.
  Smoke test successfully tested.
  --------------
  
  Now we have an Instance of CRM Siebel Stadium
  and want to configure the same OPA/determinations server used for the Dev Instance with the scene.
  
  (1) is it possible?
  
  (2) it is possible, the siebel data - adapt .properties to a connection string for the Instance of Dev. Can this cause multiple entries to connect with the many Siebel Installation?

  You can have several points of Siebel environments for the same instances of Oracle Server of determination. This is controlled by the definition of Web Service from starting.
  However for the determinations of Web he uses a Siebel incoming web service call, the server is specified in the siebel-data - adapt .properties, while a single instance of determinations of Web can be integrated in a Siebel environment.
  It is possible to deploy multiple instances of determination of the Web on the same application server, just rename the WAR prior to deployment, for example Siebel-Web-determinations - Dev.WAR and Siebel-Web-determinations - Test.WAR. You can then each point of data-siebel - adapt .properties in respective environments. Note You must also change the symbolic in Siebel URL if you launch OWD of Siebel.

• OPA with Siebel integration

  Hello
  I want to install 10 OPA with Siebel 8.1. Do I need to have a comprehensive set of determinations server engine determinations and web of determinations implemented before installing the connector for Siebel OPA?
  In addition, there's no install.exe in determining server pkg (downloaded from Oracle), how can I install it.
  Thank you
  
  Published by: user2553059 on January 17, 2010 16:08

  The server of the determination must be installed as part of the connector. The instructions for doing this are the connector install guide and the installation guide for the OPA Runtime. The server of determination is a WAR of Java file that can be installed on any J2EE application server or a .net Web application that should be deployed to IIS. The simplest option is to start to download Tomcat and deploy the WAR file.

• Virtual business component (VBC) OPA-Siebel connector compatibility

  Hello
  
  Is it possible to use virtual business components when mapping automation strategy?
  
  Currently I have a VBC created on Siebel and I am mapping some attributes of Siebel to be transmitted to the OPA but nothing happens. The connector supports the VBC?
  
  
  Thank you
  Sofiane

  Philippe,

  With the release of Siebel connector 10.3. The connector supports business objects and the integration of objects, but it does not support virtual business components.

  The earlier version (10.2.1) supports business objects/components only.

  See you soon
  Frank

• OAM and Siebel integration

  Hi all
  
  We get the following configuration:
  11.1.2 OAM
  OVD 11.1.1.6 to access the user information
  8.1.1.9 Siebel
  
  Is there a document explaining how to integrate OAM and OVD (or any LDAP repository) with this version of Siebel.
  
  I can only find documents speaking of OAM 10g, not in OAM 11 g in combination with Siebel.
  
  Thank you in advance.
  
  Filip Huysmans

  Hi Filip,

  If OVD can provide an attribute that contains a user name that Siebel, then it will be great for the integration of Siebel - this is the same as for any other LDAP server. The only documentation I can suggest is the General documentation of the OAM (Administrator's Guide).

  Kind regards
  Colin

• OPA-Siebel 8.1 / / OWD-'Close' button and go back to Siebel

  Hello
  
  We have implemented Siebel and OPA with the 10.3 connector
  Currently, OPA is called mode OWD of Siebel, the popup is opened successfully at the main screen that contains my stream to reach the screens of questions.
  My question is simple:
  How can I customize the 'Close' button in the toolbar to close the pop-up window and return to the Siebel. Now, I only save button to send data to Siebel and killing Internet Explorer from popup.
  Now, the session "closed" reached the 1st screen containing the flow.)
  
  Thank you if you have any suggestions.

  When the determinations Web runs like a Popup, it is in a new Internet Explorer window. To close the window, you will need to implement some Javascript to close the window.

  It's not quite as simple as it sounds, you need to think whether the latest information was saved to Siebel and if it should be.

  You will need to seek to change speed models. See the Templates Velocity Developer's Guide in the Oracle policy Automation Developer Help

  The best way to proceed would be to do this is to attach the javascript for the onClick event handler in the end Session button (the confirmation page after they click close). Change the ButtomControl.vm (WEB-INF/classes/templates/controls/ButtomControl.vm) and conditionally change the 'OnClick' if the {control.getText ()} is equal to the "End Session".

• AIA FP 11.1.1.3 - generation Deployment Plan for migration Dev test

  Hi all
  
  Can you post what follows the point of view of Test deployment of Dev. We have almost completed the development of an interface using AIA 11 g and are moving from one instnace to another interface, and any help is appreciated.
  
  Let us take purchase order integration between a legacy application and the purchase of the Oracle File adapter-> ABC-> EBS applicant-> supplier ABC-> DB adapter, which is a classic flow.
  
  1. the functional person defines a project in the Workbench of Life Cycle of the project
  2. functional decomposition made through business purchase stopped and components of the Service Solution task for each composite in the classical stream
  3. the ABCSs are created by linking the components of Solution of the corresponding Service of the FI using the constructor function. These composite.xmls will have the annotation filled by the manufacturer of the Service. It is normal that these composites have concrete wsdls during the development phase, but the concreate those need to be replaced to abstract before plans geenrating of deployment.
  4. the EBS is not changed, it will be pre-filled annotations and there is no need to add any annoations their
  5. the File adapter and adapters (adapters Transport?) DB must be annotated based on the developer's guide
  6. the XSD and wsdl go in the mds based using the provided scripts. All other common components can also be placed in MDS.
  7. Once done development, harvest composites using the Harvester of the AIA.
  8. after the harvest, the AIA LCW, generate the BOM. If we harvest all the composite 5 for the task together and do generate BOM, it captures all composites? Or they capture only the composite created with the constructor for Service? Or add the compistes manually to the task of company?
  9. add content harvested by changing the Nomenclature-> option "search and add existing composites. We could not find the option "Add harvested Composite" everything right by clicking on the business task.
  10. once all composites harvested have been added to the BOM, export in XML format
  11 using the Nomenclature, generate the DeploymentPlan. The deployment plan will be references to the WSDL and XSD files in MDS
  12 using the deployment Plan and assistance, deploy the composite in a new instanec.
  
  These are the questions I have,
  1 as above is correct?
  2. given that the MDS is in database Dev, a sine qua non to AID seems to be the deployment of xsd and WSDL in the Test MDS schema. Can you please post?
  3. what happens to the XSL files, bpels, mplans etc? How they move from one instance to another?
  
  
  Kind regards
  Anish

  Hi Anish,

  Yes, you need to ftp the project on the server where you could carry out the plan of deployment and the compositedir.
  
  
  
  should point to this ftped directory.

  Rgds,
  Mandrita

• OPA Siebel connector 10.1.1

  I install OPA and the connector on a new environment. Of the 10.1.1 connector release notes, it seems that the 10.1.1 connector is a 10.1 update and therefore 10.1 should be installed first so that it can then be upgraded to 10.1.1. However, the Connector zip 10.1 is no longer available on delivery. Please let me know if 10.1 should be installed first, or if I can go ahead and install the 10.1.1 connector.
  
  Thank you

  You are not required to have an existing installation of the connector Oracle policy Automation for Siebel. If you had an existing installation then the documented process of upgrading your current version must be followed. Please note that details on the installation process are provided in the installation guide.

  All downloads of OPA of Oracle® E-Delivery are complete facilities.

• Integration between SEEP (planning and budgeting Service Cloud) and BIC, BIC & ERPCS

  Hi all

  I have two scenarios:

  I capture/take ERPCS transactional data and to report to the BIC.

  I capture/take the analytical data of SEEP (cube) and to report to the BIC.

  Can someone please shed some light on the requirements above, especially from the point of view of integration.

  Also, share any integration doc. If there is.

  Thank you

  Ashish

  Hi Ashish,

  It would be a two-step process. You can extract the data of SEEP down using the Rest API of SEEP to a location on site and then you will have to download on BIC for reporting.

  https://docs.Oracle.com/cloud/latest/pbcs_common/crest.PDF

  Integration is on the roadmap, but it is not yet available.

  Paige

• Adobe Story with OnLocation integration - list of plans

  I am trying to export a script from Adobe Story and import it in OnLocation, but I can't seem to get "shot" elements in the story to become "space shot" in OnLocation. Is what I could get OnLocation to recognize entire scenes, but not of items in individual shooting placeholders.

  History/OnLocation does support writing a shotlist in history and turning into shooting placeholders in OnLocation? Is there any news on some potential devices mentioned in this thread on the shooting elements that are related or layered in a way, so you don't have to maintain several documented lists of plans and scenarios?

  SL

  Now entered the history of shots don't end up shooting spaces reserved in OnLocation. We support only convert scenes-> shot spaces reserved.

  We see your point though and add it to the list of things to do.

  -Anubhav

  Anubhav Rohatgi

  Senior product manager