Open the project Veristand Labview 2012 2012
Hello!
I have on my maschine 2012 LabVIEW and NI Veristand 2012.
I am trying to open the 2012 2012 LabVIEW Veristand in project. Here's the sequence that I made:
-Open Veristand separately (Yes, I know, it can be called with the help of command line)
-Run the vi as illustrated in the diagram below:
-as in the photo above, I received error 1172.
I checked in my task manager--> there is no double open veristand
I restart my PC, repeat the same procedure--> does not work. Received the same error message.
Someone at - it experience even?
Thank you
Rajamodol
Dear Rajamodol,
VeriStand gateway creates a TCP/IP communication channel that
facilitates communication with the VeriStand engine on the network.
So if you are running a project on a desktop PC, gateway VeriStand initiates the
VeriStand engine. If you run a project on an RT target, the VeriStand
Bridge synchronizes with the system definition file that is running on the
Target of RT.
If you set the gateway VeriStand "localhost".
Kind regards
Oleg Scherling, mengg | Engineering applications. National Instruments | NIG. |
Tags: NI Software
Similar Questions
-
RTE de LV cannot open the project files that include references .lvlib in dependencies
I am writing a DLL LabVIEW to inspect the LabVIEW project files, and I noticed that if a project has a .lvlib reference in its dependencies, then the Run-Time Engine is contradictory on whether or not he can find the project file:
- Project.Open returns error 7 (file not found)
- Project.GetFileLVVersion is a success
Here are some excerpts from my code of G and C engaged in this behavior:
int openStatus = StatusSuccess;
char * projectVersion = createStringWithLength (VersionStringLength);printf ("Analysis %s\n", pathchaine);
OpenProject (pathchaine & openStatus, projectVersion, VersionStringLength);
printf (" project written in LabVIEW %s\n", projectVersion);If (openStatus is StatusSuccess)
{
printf (" Open the project file.") \n") ;
}
on the other
{
printf("Error: could not find Project file, or file was not a Project file (Error code %i).\n», openStatus);")
}However, when running in the development environment, the two methods are successful.
Is this a bug, and if so, is it fixed in 2014 of LabVIEW?
Here's how you can reproduce:
Prerequisites:
- LabVIEW 2013 SP1 32-bit
- ConEmu for a good console- https://code.google.com/p/conemu-maximus5/wiki/Downloads
- minGW for compilation of a program to use the LabVIEW - http://sourceforge.net/projects/mingw/files DLL
reference .lvlib to break dependencies Project.Open in LV RTE
- Open the attachment in a temporary directory (e.g. c:\xtra\temp)
- Open "OpenProject.lvproj" in LabVIEW.
- Build 'Open library project'.
- ConEmu with a bash command prompt, navigate to the temporary directory.
- Type make
$ make
patch the file "builds/platdefines.h.
GCC - std = c99 g OpenProject.c o OpenProject.exe - lOpenProject - Lbuilds
6. type "c:\xtra\temp\OpenProject.lvproj" OpenProject
OpenProject $ 'c:\xtra\temp\OpenProject.lvproj '.
Analysis c:\xtra\temp\OpenProject.lvproj
Project written in LabVIEW 13.0
Open the project file.
7. the opinion that both call nodes execute correctly.
8. type "c:\xtra\temp\OpenProjectWithLvlibDep.lvproj" OpenProject
OpenProject $ 'c:\xtra\temp\OpenProjectWithLvlibDep.lvproj '.
Analysis c:\xtra\temp\OpenProjectWithLvlibDep.lvproj
Project written in LabVIEW 13.0
Error: Could not find the project file or file was not a project file (error code 7).
9. notice that the node version managed while the open failure.
10 type diff OpenProject.lvproj OpenProjectWithLvlibDep.lvproj
$ diff-u OpenProject.lvproj OpenProjectWithLvlibDep.lvproj
-OpenProject.lvproj kills Nov 4 11:28:28 2014
+++ OpenProjectWithLvlibDep.lvproj kills Nov 4 11:32:37 2014
@@-13,7 + 13.11 @.
true
fake
-
+
+
+
+
+
true Here's another way to trigger this behavior, which shows that LabVIEW occasionally Range the element dependencies:
- Open "OpenProject.lvproj" in LabVIEW.
- Add to the project a new VI and place the constant path of file "Application Directory" his block diagram.
- Select ""leader "Save All (this project)" and use the default name for the new VI.
- Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject
- Notice that there is a mistake once again, as is expected.
- Remove the "Application Directory" path of file constant
- Select ""leader "Save All (this project)"
- Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject
- Note that the problem has disappeared, as is expected.
- Add the "Application Directory" path of file constant in the block diagram.
- Select ""leader "Save All (this project)"
- Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject
- Notice there is no problem, which is surprising, because that there should be a mistake because the dependencies item was not tidy.
- Close the new VI and pull out of the project.
- Select ""leader "Save All (this project)"
- Open "OpenProject.lvproj" in a text editor.
- Note that the dependencies item was put away.
- Add VI back to the project.
- Select ""leader "Save All (this project)"
- Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject
- Notice that there is a mistake once again, as is expected.
NInjaneer_wow wrote:
The same behavior occurs in LabVIEW RTE: a new project with a constant of the Application in an empty vi directory will return an error 7 - file not found, but still return the correct version of LabVIEW in which the project was created.
I did experiment with workarounds for this problem, and I found a.
When I used to get the path of LabVIEW libdir in the ini of the executable file, execution is able to load and inspect the project file.
LIBDIR = 'C:\Program NIUninstaller Instruments\LabVIEW 2013'
While it is expected that a stand-alone executable can be placed on a system that does not have the LabVIEW IDE, it is still surprising to me that the execution engine cannot find standard library of LabVIEW without some explicit guidance. What other factors contribute to this behavior?
References:
- Configuration of LabVIEW files and paths- http://labviewwiki.org/LabVIEW_configuration_file/Paths
After that I immigrated from macbook pro, iMac, I can't open the project
I tried to open projects in the external hard drive with the new iMac. Some of the film clip was't it. So I moved all my files from the MacBook Pro, iMac and tried again to open the project. Then error message informs you that the file is used by another account and cannot open.
The account was my account until I immigrated.
Help, please!
There may be problems with some file permissions.
Around that, the simplest method is to set the "Ignore ownership on this Volume" checkbox
-Select the external hard drive in the Finder
-Press command-I to open the read window information
-If necessary, click the lock and enter your password
-Check the box that says "ignore ownership on this Volume".
original title: Director of windows
my windows Movie Maker won't open the project that I saved. It is said that the program was narrow, badly what I can do to fix this?
Hello
My friend John Papa - MVP - is the expert on Windows Movie Maker.
PapaJohn.org
http://Papajohn.org/
PapaJohn - online tutorials
http://www.Papajohn.org/mm2-online-tutorials.html
Windows Movie Maker Tutorials - check the sounds of the addition in the left menu and others on the
main screen.
http://www.windowsmoviemakers.NET/tutorials/
Windows Live Movie Maker that works on Vista and Windows 7, see the link under Windows Live Essentials.
http://windowslivehelp.com/
Windows Live - Movie Maker Portal - official support Site - see also the Forums of the right part of the page
http://windowslivehelp.com/product.aspx?ProductID=5
====================
These might help:
Getting started with Windows Movie Maker
Import video, photos and audio on Windows Movie Maker
Get a movie in Windows Movie Maker
Make a movie quickly in Windows Movie Maker (AutoMovie)
Publish a movie in Windows Movie Maker
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
I am trying to open a project on another computer, but I'm having some trouble. I followed the steps of the tutorial: http://agile.csc.ncsu.edu/SEMaterials/tutorials/import_export/ but I have a red exclamation point icon when I open the project. The classes are riddled with red error and it cannot be run in the Simulator (Run As - > Simulator does nothing). I noticed that the file on the first computer has a net_rim_api jar file and the other is not. I don't know if this is the problem and if it is I don't know how to import it. The error given by the section of the problem of the eclipse is:
"Project cannot be built until the path of errors are resolved" and "container Unbound classpath: ' JRE System Library [BlackBerry JRE 6.0.0] project"MyProject"
The appropriate BlackBerry Java SDK has been installed in Eclipse on machine problems?
Cannot open the project created during the trial period
I've made use of the 7 day trial period and started with two projects. After 7 days, I have purchased Premiere Pro for a month. Now I can't open the projects more. The error message is: it should contain a sequence that could not be opened. No preview of the sequence is preset file or codec might be associated with this type of sequence...
Very strange and annoying. It seems that the trial had several codecs then the product? Projects already took me many hours, so it bothers me really, mostly because I thought that I must pay for exactly the same product I have used during the trial.
What can I do about it?
Missing features and sequence Presets - sequence could not be opened
Error message when you try to open the project in Captivate 9
Hello
I have a huge problem with one of my projects. It was working fine and that it was completing something happened. One of my coworkers opened to check the faults of grammar of last minute, and when she tried to save him and it took him a long time she decided to close it. which resulted in the error "not responding" and the screen is empty. After this incident, non of us can open the project. When I try to load it goes to 10%, and gives me this message.
Needless to say that this is the only copy and I really don't want to repeat the same project from scratch. Could you guys please help? Any suggestion is appreciated!
Can you check if it's "locked" files on a system?
You do not check the backup option in the preferences? It's always the first thing to do when you install or patch Captivate.
The cache folder may be a secondary cache if you can identify it, you compress the folder corresponding to the date that you have finally opened the project. Do not clear the cache at the moment.
Cannot open the project elements
Hello!
I use a MacBook Pro, El Captain, 2.4 GHz Intel Core i5, 16 GHz RAM
Adobe Premiere Elements 12
After you have created and saved a project I restarted my Mac. Then, after a restart I could not open the projector-elements:
The following message if poster (in German) appeared: 'ist Das Projekt offenbar beschadigt. ES kann nicht open werden' (the project seems to be defective. It cannot be opened).
I rebooted again and also tried to open project saved automatically - the same result files. Cannot open the project.
Does anyone know how to save the movie...?
Thank you in advance!
Good news! Please mark this question as answered.
Hi im quite new for first pro and I'm having a problem when I opened my project and it is unable to locate the files. I find the files that are 'missing' and open the project. Everytime I open the project everything I see is all that media have these red, pink, blue, green, yellow lines, where pictures should be. And there is also the title of my pictures in the upper left corner. No one knows what it is and how I could fix this?
[title published by mod]
[Please do not double post, deleted the other]
Right-click on the images in the project window: recharge or replace it.
After the accident: edge does not open the project
Hi guys,.
I had a problem - I hope regular -: just after the app crashed, I can't open the project im working on more. The console reports a failure of JavaScript. I work with the version Edge Animate 2014.1.1
I tried several tutorials ( How to fix corrupted files EA - Tutorial #3TE) a read a lot o f messages but I'm still not able to solve this problem.
Anyone can take a lokk at the project and might have a hint? I'm almost going crazy at the moment...
I downloaded the files project here: Dropbox - project.zip
Thank you very much!
Kind regards
BenBo
Edit: sorry. the link was bad... I edited it.
Probably caused by edge when fonts are added.
Go to the edge.js and remove links from fonts there.
that will make opening again.
-Rob
Edgehero.com
Chronology in the process of disappearing/not appearing when I open the project
Well, another reason Adobe Premiere CC 2014 pissing me off the coast. I worked on a project for quite some time now. I opened it today and noticed one of my timeline's (sequences) did not show. I tried to bring it back by closing and re-opening the project which of course now deleted a different chronology or sequence of the mine. Someone has an idea, what happens? Thank you for your help.
Looks like you might be hitting the problem addressed in this thread: project opened random sequences.
If it is indeed the same thing, then the good news is that a fix is coming in the next update [release date has not yet announced].
Cannot open the project file with write access.
I saw that this problem has been reported before, but have yet to find a solution.
I have my project file in an external hard drive. When I plug the hard drive to another computer and want to save it, I get this message:
"Cannot open the project file with write access. The file may be locked, or you don't have permission to write to this location. Select Save as... »
I don't want to register as because other projects refer to this file and also my file is still going to be ruined.
FYI two computers use Windows 7.
All solutions?
Right-click on the folder in Question and select Properties. Select tab security make sure you that you then add everyone to the list of users. Do you this by selecting edit and then add. Type in all members of the section of the object, and click ok. Then select all the user and check full control. Press Apply and we'll adjust the permissions for the folder and subfolders and files.
Eric
ADK
Windows XP / RH8 / RoboSource Control 3.1
Tried to open a project that I have not consulted for while. After you click Yes or no to the question «Get latest...» "I get the error"Adobe RoboHelp 8 has encountered a problem and needs to close. We are sorry for the inconvenience. »
I tried several times with the same results. Forum search finds several results, but see nothing that corresponds to that.
I think it may be a project file to remove that can allow me to open the project, but thought I should ask first.
Any help will be greatly appreciated.
Joe
Remove the CPD file allowed me to open the project in HR
RH8 Word cannot open the project RHx5
I REALLY have to update an existing project of RHx5 WinHelp. We have updated last year from Office 2003 to 2007, which forced / allowed me to update RHx5 RH8 and RH8 for Word has been installed on my XP pc.
Tried to open the project RHx5 and received the error: bad DLL calling convention (error 49)
Given that the attempt had opened a blank Word document, I tried to close it, but failed, with an another error message indicating that a dialog box is open - despite no dialog being visible at this time.
Can anyone offer helpful suggestions or advice? I would be very grateful, because our software (rather old) depends on ID card HR to provide contextual assistance.
See extract of 92.
http://www.Grainge.org/pages/snippets/snippets.htm
See www.grainge.org for creating tips and RoboHelp
Cannot open the project; Cannot find the folder for this project
I have Encore CS4 and when I opened it, I clicked on "Create a new project" and he chose my office as the location target. Then when I click on the file from my desktop or reminder, I get the following message appears: "unable to open the project; This project file was not found. But the folder and the file exist. The file extension is .ncor what I am doing wrong?
Still worked for you before?
If so, what has changed?
If not, you run as administrator?
Maybe you are looking for
-
HP Pavilion 15-ak085sa: video update HP Pavilion Gaming Laptop 15-ak085sa card
Hello Is it possible to install the Nvidia card in this game (upgrade) laptop? I bought, but it is impossible to play without graphics card. Best, Alex
-
I have a program of 13 dasylab which is taken from measures and sending signals TTL using a MC1208FS to a servo-motor who performs an operation in advance or reverses jog based on data. The actuators are 11 steps in front of the sensors to measure in
-
Developer application newbie - EXE does not write to disk
I am running LabVIEW 14 on a box of Windows 7 here in my office. I develop and test here, and then build an EXE file and deploy this EXE on a remote PC from Win7 via TeamViewer. He worked for a number of intermediate screws that do not involve writ
-
HI guys, I hope you can help or at least give a point in the right direction. I am a freelance photographer with a large part of the suite creative Adobe CS6. After a disaster of a week, I came home to find the motherboard on my editing station is fr
-
How to load balance Terminal Server (Server 2008 R2) servers
Now we have about 3 Terminal Server servers that are used by the three thin client Labs (30 stations by lab). So now I have a server terminal server assigned to a laboratory, and it does not work at the moment. But I am wanting to add additional Term