OpenG library blocks request Builder

If I use the string to 1 d array [String of 1 d array__ogtk] VI inside my VI main, generator of application generates this error. Why?

Thanks for your time

I think that this is due to the new generation-layout in LabVIEW 2009 where there are very long names in the temporary build folder. The details mentioned anything?

This can be circumvented by placing the build in one a single file (such as c:\build).

If this isn't the case trial, please upgrade to the latest version of the tool chain OpenG (2.6).

Tone

Tags: NI Software

Similar Questions

  • Tried to use iTunes to restore iPhone 5s, but the 17 error happens: "this device is not eligible for the requested build". No problem to enter the mode of recovery, apple server and the internet. Help?

    I tried to use iTunes to restore my iPhone 5s, but the 17 error happens: "this device is not eligible for the requested build". No problem to enter the recovery mode, connection to the apple Server (the software update download was complete) and internet connection. Help? I do an Apple store to restore?

    Error 17 refers to network problems. Take a look at these articles and try the suggestions:

    Solve the iOS update and restore error in iTunes - Apple Support

    Get help with iOS update or restore errors - Apple Support

  • I have a trigger to post to the data block request...

    I have a trigger to post to the data block request...
    BEGIN
     IF :SECTION IS NOT NULL THEN
          SELECT DESCRIPTION INTO :BOROUGH FROM C_LOV_BOROUGH WHERE :SECTION = SECTION;
     END IF;
END;
    Table C_LOV_BOROUGH has many lines

    When I scroll quickly after querying data...
    I get the error ORA-01403, after than scrolling up and down... it disappears... someone can help?

    Use a slider instead of direct SQL SELECT as if you can't find all the lines, would not raise an exception, or use an exception handler to handle all exceptions silk-screened - found.

    DECLARE
 CURSOR c_get_desc IS
   SELECT DESCRIPTION
     FROM C_LOV_BOROUGH
   WHERE SECTION = :SECTION;
BEGIN
IF :SECTION IS NOT NULL THEN
  OPEN c_get_desc;
  FETCH c_get_desc INTO :BOROUGH;
  CLOSE c_get_desc;
END IF;
END;

    Second method:

    BEGIN
  IF :SECTION IS NOT NULL THEN
    SELECT DESCRIPTION INTO :BOROUGH
      FROM C_LOV_BOROUGH
   WHERE SECTION = :SECTION;
  END IF;
EXCEPTION
  WHEN NO_DATA_FOUND THEN NULL;
END;

    Cursor is safer than direct SELECT SELECT because maybe meet TOO_MANY_ROWS exceptions too... but if you use the slider, he realized the first found line extraction and populate the BOROUGH and if it does not find anything, it won't throw an exception.

  • You are looking for the block CD build based on the time for MPC simulation.vi

    Hello everyone! I'm trying to implement MPC in LabVIEW. I downloaded some code that shows the implementation. My question is in these codes that I see a named block as CD build based on the time for MPC simulation.vi. I tried to find a lot of this block, but I could not... Can someone help me with the problem (exactly under what section I get this block) or can someone tell me how can I give the profile of setpoint for the problem of simulation MPC?

    The associated screws to generate the profile found in:

    C:\Program Files (x 86) \National Instruments\LabVIEW 2011\vi.lib\addons\Control Design\_MPC\Reference profile

    or

    C:\Program NIUninstaller Instruments\LabVIEW 2011\\vi.lib\addons\Control Design\_MPC\Reference profile

    You can look at examples of:

    C:\Program Files (x 86) \National Instruments\LabVIEW 2011\examples\Control and Simulation\Control Design\MPC

    C:\Program NIUninstaller Instruments\LabVIEW 2011\examples\Control and Simulation\Control Design\MPC

    to check the use of these screws

  • Windows Media Player library sharing request

    I received a request to share Windows Media Player library. I'm not on a network. Is this some type of malware or something? How should I handle this? A month ago, I received a similar request for iTunes sharing Jeremy-PC. Help, please. My computer has been hacked?

    You're invited because you are on a network, this is a security feature of Windows.

    I assume that you have chosen the option to not share when asked?

    You can safely share if you know who you are sharing with (if you know who is Jeremy-PC)

    If you prefer not to share with who you can disable media sharing.

    To activate:

    When you are connected to the internet, go to: Control Panel, network and sharing Center.

    Expand the sharing of multimedia files, click on edit, if media sharing is currently disabled, there will be a popup.

    If you check the share my media, then click OK, you get another popup.

    Here you can highlight the computers on the network and allow or deny.

    If you click settings, you can choose what you want to share.

    To turn off:

    When you are connected to the internet, go to: Control Panel, network and sharing Center.

    Develop sharing media files and click on change, if media sharing is currently on uncheck share my media to:

    Click on apply, OK

  • Please remove block request of friend I did for a month

    Madam/Sir, I blocked shipment a month friend request them. Please Sir/Madam my friend request widrow block it please please please.

    Hello

    1. What is the exact name of this feature?
    2. How do you block this option?
    3. on the application or program that you see this option?

    Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
    How to ask a question
    http://support.Microsoft.com/kb/555375

    If you are referring to the facebook option then this link might be useful.
    Why my friend request did not pass?
    https://www.beta.Facebook.com/Help/?FAQ=124586474287771

  • "Error occurred while packaging the application...". Cannot load library' in Flash Builder 4.7 (iOS)

    EU struggling to solve this error yesterday in Flash Builder 4.7 packaging an app for iOS.

    "

    Error occurred during the application of packaging:

    Exception in thread "Main Thread" java.lang.UnsatisfiedLinkError: can't load library: C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK\lib\aot\lib\llvm.dll

    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1706)

    at java.lang.Runtime.load0(Runtime.java:770)

    at java.lang.System.load(System.java:1004)

    at adobe.abc.LLVMEmitter.loadJNI(LLVMEmitter.java:587)

    to adobe.abc.LLVMEmitter. < clinit > (LLVMEmitter.java:597)

    at com.adobe.air.ipa.AOTCompiler.generateExtensionsGlue(AOTCompiler.java:419)

    at com.adobe.air.ipa.AOTCompiler.generateMachineBinaries(AOTCompiler.java:1790)

    at com.adobe.air.ipa.IPAOutputStream.createIosBinary(IPAOutputStream.java:378)

    at com.adobe.air.ipa.IPAOutputStream.finalizeSig(IPAOutputStream.java:762)

    at com.adobe.air.ApplicationPackager.createPackage(ApplicationPackager.java:91)

    at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:246)

    at com.adobe.air.ADT.parseArgsAndGo(ADT.java:571)

    at com.adobe.air.ADT.run(ADT.java:419)

    at com.adobe.air.ADT.main(ADT.java:470)

    "

    Update:

    My old solution (of the 64-bit JRE installation) created a different problem. After several attempts and restarted, I was unable to work in the Flash Builder IDE, because it did not meet the burden. Whenever I had to use the Task Manager to close the application.

    Solution apparent:

    Close all applications running in Windows

    Uninstall all versions of JRE (Java Runtime Environment)

    Uninstalling Flash Builder 4.7

    Reinstall Flash Builder 4.7

  • Microsoft Visual C++ Runtime library application requested Runtime to terminate in an unusual way

    I can, t my hp games game since I deleted a game I had a request from error message requested execution to terminate in an unusual way

    How to solve this problem?

  • my hotmail account has been blocked, request unblock my account

    my hotmail account * address email is removed from the privacy * is blocked. ask for help to unlock

    Hi all

    Please visit the windows live hotmail solutions Center, where one of the experts in this area would be better suited to offer you assistance. Thank you!

  • Urgent: Installation of the BB10 SDK B3 upgrade blocks Flash Builder

    I just upgraded another site with Beta 3 of the AIR SDK for Flash Builder (4.6).  Now Flash Builder crashes with an alert pointing me to a log file.  The log file is long, but the tail has this:

    !MESSAGE Missing required bundle org.eclipse.mylyn.context.core_[3.8.0,4.0.0).
!SUBENTRY 2 org.eclipse.mylyn.team.ui 2 0 2012-10-04 12:11:29.426
!MESSAGE Missing required bundle org.eclipse.mylyn.context.ui_[3.8.0,4.0.0).
!SUBENTRY 2 org.eclipse.mylyn.team.ui 2 0 2012-10-04 12:11:29.426
!MESSAGE Missing required bundle org.eclipse.mylyn.resources.ui_[3.8.0,4.0.0).
!SUBENTRY 2 org.eclipse.mylyn.team.ui 2 0 2012-10-04 12:11:29.426
!MESSAGE Missing required bundle org.eclipse.mylyn.tasks.core_[3.8.0,4.0.0).
!SUBENTRY 2 org.eclipse.mylyn.team.ui 2 0 2012-10-04 12:11:29.426
!MESSAGE Missing required bundle org.eclipse.mylyn.tasks.ui_[3.8.0,4.0.0).
!SUBENTRY 2 org.eclipse.mylyn.team.ui 2 0 2012-10-04 12:11:29.426
!MESSAGE Missing required bundle org.eclipse.mylyn.commons.ui_[3.8.0,4.0.0).
!SUBENTRY 2 org.eclipse.mylyn.team.ui 2 0 2012-10-04 12:11:29.426
!MESSAGE Missing required bundle org.eclipse.mylyn.commons.workbench_[3.8.0,4.0.0).
!SUBENTRY 2 org.eclipse.mylyn.team.ui 2 0 2012-10-04 12:11:29.426
!MESSAGE Missing required bundle org.eclipse.mylyn.monitor.core_[3.8.0,4.0.0).
!SUBENTRY 1 org.eclipse.osgi 2 0 2012-10-04 12:11:29.426
!MESSAGE Bundle com.qnx.flashbuilder.multiplatform.qnx.ui_2.0.0.201209241107 [1125] was not resolved.
!SUBENTRY 2 com.qnx.flashbuilder.multiplatform.qnx.ui 2 0 2012-10-04 12:11:29.426
!MESSAGE Missing required bundle com.adobe.flashbuilder.project.multiplatform.ui_[4.6.0,5.0.0).
!SUBENTRY 2 com.qnx.flashbuilder.multiplatform.qnx.ui 2 0 2012-10-04 12:11:29.426
!MESSAGE Missing required bundle com.adobe.flexbuilder.project.ui_[4.6.0,5.0.0).
!SUBENTRY 1 org.eclipse.osgi 2 0 2012-10-04 12:11:29.426
!MESSAGE Bundle com.qnx.flashbuilder.multiplatform.qnx.ui.nl1_2.0.0.201209241107 [1126] was not resolved.
!SUBENTRY 2 com.qnx.flashbuilder.multiplatform.qnx.ui.nl1 2 0 2012-10-04 12:11:29.426
!MESSAGE Missing host com.qnx.flashbuilder.multiplatform.qnx.ui_2.0.0.

!ENTRY org.eclipse.osgi 4 0 2012-10-04 12:11:29.427
!MESSAGE Application error
!STACK 1
java.lang.RuntimeException: Application "com.adobe.flexbuilder.standalone.FlashBuilderApplication" could not be found in the registry. The applications available are: org.eclipse.ant.core.antRunner, org.eclipse.ant.ui.antRunner, org.eclipse.equinox.app.error, org.eclipse.equinox.p2.director, org.eclipse.equinox.p2.garbagecollector.application, org.eclipse.equinox.p2.publisher.InstallPublisher, org.eclipse.equinox.p2.publisher.EclipseGenerator, org.eclipse.equinox.p2.publisher.ProductPublisher, org.eclipse.equinox.p2.publisher.FeaturesAndBundlesPublisher, org.eclipse.equinox.p2.reconciler.application, org.eclipse.equinox.p2.repository.repo2runnable, org.eclipse.equinox.p2.repository.metadataverifier, org.eclipse.equinox.p2.artifact.repository.mirrorApplication, org.eclipse.equinox.p2.metadata.repository.mirrorApplication, org.eclipse.equinox.p2.updatesite.UpdateSitePublisher, org.eclipse.equinox.p2.publisher.UpdateSitePublisher, org.eclipse.equinox.p2.publisher.CategoryPublisher, org.eclipse.help.base.infocenterApplication, org.eclipse.help.base.helpApplication, org.eclipse.help.base.indexTool, org.eclipse.jdt.apt.core.aptBuild, org.eclipse.jdt.core.JavaCodeFormatter, org.eclipse.ui.ide.workbench, org.eclipse.update.core.standaloneUpdate, org.eclipse.update.core.siteOptimizer.
    at org.eclipse.equinox.internal.app.EclipseAppContainer.startDefaultApp(EclipseAppContainer.java:248)
    at org.eclipse.equinox.internal.app.MainApplicationLauncher.run(MainApplicationLauncher.java:29)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622)
    at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577)
    at org.eclipse.equinox.launcher.Main.run(Main.java:1410)

    How can I get this fix so I can run the new Flash Builder?

    Does anyone have a link to the beta 2 release, so at least I can continue to work?

    Thank you.

    Good way to spend half a day. Reinstall solved the problem.

  • iPad blocked - requesting an activation code

    Hi all

    My GF was using his iPad and all of a sudden the phone off and turn it back on.

    She was only web browsing when below that's happened.  She is recorded in its iTunes and iCloud connections on his iphone without any problem.  Even with his iPad. No idea what it is.

    We even tried to restore in iTunes, but he always asks the information below.

    She got a white screen with the following text:

    ACTIVATE iPAD

    This iPad is currently bound to a ([email protected]) Apple ID.  Log in with the Apple ID that was used to put in place this iPad.

    Apple ID

    Password

    There is a bit of Activation help I clicked.  Says "a password is required to activate this device because its owner has used find my iPhone to establish links with their ID to Apple."

    If this is your device, enter the Apple ID and password you to configure iCloud.

    Followed by some, more info on help - it's why I'm here to meet people!

    This device purchased second hand? If yes then then the original owner should be contacted (e) to remove the lock of the activation

    If your RS is the first owner of the device - check if the device appears in Find iPhone when it connects to https://www.icloud.com and from there - delete it

    If the device is not seen there - make Apple or an authorized with a proof of ownership and identity and Apple Service Center will help you remove this lock

  • Submitting a form Via the REST API using the PHP library request

    Can someone send please how to use the library to query PHP found at fredsakr/eloqua-php-request · GitHub to publish form to Eloqua data?

    So far, I have following:

    // include the Eloqua REST client 
require_once('eloquaRequest.php');  


// define the Contact class  
class ContactForm  
{
  public $FirstName;  
  public $LastName;  
  public $PhoneNumber;
  public $Institution;  
  public $ContactComment;  
  public $EmailAddress; 
} 

$client = new EloquaRequest('SITE', 'USERNAME', 'PASSWORD', 'https://secure.eloqua.com/API/REST/1.0');

// instantiate a new instance of the ContactForm class 
$contact = new ContactForm();  
$contact->FirstName = 'Sample';  
$contact->LastName = 'Import'.date("Y-m-d-H-i-s");  
$contact->PhoneNumber = '111-111-1111';
$contact->Institution = 'Company Name';
$contact->ContactComment = 'This is a test of the API';
$contact->EmailAddress = '[email protected]'; 

// invoke a POST request to create the contact 
$response = $client->post('/data/form/45', $contact);


    However, it returns the following:


    array(1) { [0]=> object(stdClass)#318 (4) { ["type"]=> string(21) "ObjectValidationError" ["property"]=> string(11) "fieldValues" ["requirement"]=> object(stdClass)#316 (1) { ["type"]=> string(23) "NoDuplicatesRequirement" } ["value"]=> string(6) "" } }


    Can someone give me a guide step by step on how to do it properly please?

    Hello world

    We have added a 'sample' in the repository of PHP library folder request on Github. The first example shows how to submit form using the API data:

    Please note that you can describe the form fields and other metadata using the following endpoint:

    Hope this helps and please let me know if you need more information.

    Thank you

    Fred

  • How to simultaneously interrogate two data blocks?


    Hi all

    I need your contributions on the following problem statement...

    Existing features:
    We have two data blocks (Parent) and B (child) in a relationship. The two blocks of data refer to different tables.
    A data block is the block of query data, and for one record in a block, we can have multiple records in the block (B) multiple records in block B are both after running a query, this is implemented using a list C item (belongs to block a third).

    For example
    We will tell block B can have 5 different types of entries for each record in A building. In this case, the element of list C will have 5 values corresponding to these entries. Once the query is performed, block B will indicate the default entry for the requested block record. To see other references to check user can select the desired value in the element C of the list and the corresponding entry in the block b is extracted.

    Requirement:
    Now, our requirement is of allowing queries simultaneously on two blocks of data A and B. implement this I replaced the data blocks and B with a unique X data block that comes from joining two tables mentioned by data blocks A and B. As fields must allow to insert, update, delete operations, we did not use a view here.

    Question:
    Now the problem is, each record in the block for block B had several entries earlier is now getting listed several times because of the join.

    I tried but did not find any solution for this. I would be grateful if any of you can suggest how we can interrogate the two blocks at the same time without affecting existing features.

    Thank you
    Amit

    I don't understand your requirement in detail. I try to repeat what I got so far.

    You have a master-block based on a table A and a detail-block based on a B table B. So far so good. You can now query based on the conditions just datablock has, because B is a detail and cannot so not queryied in the context of the block has.

    Your reuirement is to ask about two blocks A and B and find the block b also without giving conditions for the relevant block.

    -What?

    What I don't understand, what is the block for that c used?

    An idea for querying the data of B block: create items Non-base of data-objects in a block to the search criteria, you need on block B and make them Queryable.

    In the PRE-QUERY-trigger on block to build a condition WHERE if something that the criteria the search entered, as

    IF :BLOCK_A.SEARCH_CRITERIA_FOR_BLOCK_B IS NOT NULL THEN
  SET_BLOCK_PROPERTY('BLOCK_A', ONETIME_WHERE, 'WHERE PKVALUE IN (SELECT FKVALUE_TO_A FROM TABLE_B WHERE FIELDVALUE=' ||:BLOCK_A.SEARCH_CRITERIA_FOR_BLOCK_B)');
END IF;

    This question also records A for which you want to have files on the B. So you can keep the structure of the block until master / detail.

  • popup blocker has blocked a security program how it unlocked

    popup blocker has blocked a security program how it unlocked

    What kind of security program are you referring?

    Are you sure it's pop-up blocker?

    If it is blocked by the pop-up, it's under the browser or the website and NOT the Windows application.

    Blocker normal will never block request, and they only block pop-up Web sites.

  • "the 495 ordinal not found in the dynamic link library urlmon.dll" produces 10 times every reboot

    I am running MS Vista on my laptop. Recently when I start up I get the message "the 495 ordinal not found in the dynamic link library urlmon.dll" in a popup box and must cancel 10 times before I can move forward.

    I thought somehow it may relate to a recent update that has been accepted for Skype on my system.  So I uninstalled Skype.  Attempts to reinstall Skype have failed.  the installed app, but I cannot arrive at a login screen.  Instead of the normal Skype window, I have just the bottom of loading in a web browser.

    I found a similar one but transposed ordinal error discussed 459 in the KB and I tried following many of its steps (+ my results):

    "Method 1:

    To resolve this problem in Internet Explorer, follow these steps:

    a. Quit all programs that are running.

    b. Click Start and then click Run.

    c. type regsvr32 urlmon.dll, and then click OK.

    d. When you receive the message "DllRegisterServer in urlmon.dll succeeded," click OK.

    ('DllRegisterServer in urlmon.dll' received successful)

    If this does not resolve the issue, repeat steps 2 through 4 for each of the following files (in step 3, replace Urlmon.dll with each of the names of files below):

    ·         Shdocvw.dll (failed)

    ·         Actxprxy.dll (failed)

    ·         Oleaut32.dll (failed)

    ·         Mshtml.dll (received no response)

    ·         Browseui.dll (failed)

    ·         Shell32.dll (managed)

    Method (step 2):

    I suggest you to start in safe mode and test the question.

    Safe boot mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

    Method (step 3):

    I suggest you perform a SFC Scan and check if it helps.

    The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.

    How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows: http://support.microsoft.com/kb/929833

    (SFC Scan completed successfully)

    Side note: when I started in Mode safe I immediately received an error "Microsoft Visual C++ Runtime library"Application request time to close in an unusual way"

    DavidMCandy suggested the user a list of the URLMON. Dll on the system.  I did as well.  See the file on my Onedrive to

    http://1drv.Ms/11PQ3dm

    I hope this will help you to find me a solution to my problem.

    First of all lets run a startup repair.

    This hardware test (and other things but we want to test the equipment). To do maintenance on the database and the files used by your two frequent falls (related to how windows manages system files including Windows Update). SFC is also linked to this, so we know that certain parts are working.

    After return from the logs generated.

    Startup Repair

    If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again. [Correction to start - Help and Support].

    In the Display Options Options Advanced startup, use the arrow keys to highlight repair your computerand press ENTER.

    Select the Startup Repair tool.

    Startup Repair makes a log file. See C:\Windows\System32\LogFiles\Srt\SrtTrail.txt.

    To access if Windows does not start, in the Advanced Boot Options screen, use the arrow keys to select repair your computerand press ENTER.

    Select command prompt.

    Type

    type C:\Windows\System32\LogFiles\Srt\SrtTrail.txt | more

     

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     
    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

Maybe you are looking for