opening a swf file from another swf

Similar Questions

• Homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using the homegroup.

  Group residential slow and other problems with it

  Hello!

  I have 3 Windows 7 PC-s (office #1, #2 desktop and laptop). I created HomeGroup and join all computers, so I can access the files on each of them. But my problem is the following: homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using homegroup, because it is slow and every two seconds of loading film. And also needed a few minutes to open the pictures (more than 10 GB in all folders) to a folder in the other PC. Why is this work so slow? I don't think there is a problem with slow wireless router, because I can replace my old Linksys WRT54GL Linksys E4200, which is able to transfer video HD 3D such as Linksys provide. What should I do to fix this? Should I change all the settings in Windows, perhaps in the router...?

  And why my laptop is not always visible to the other PC to homegroup? He see two others and two other sees, but they are not portable. This happens sometimes. But then I still share with homegroup libraries to my laptop and there still other computers see it and all shared libraries. Where is the problem? I also try to change the HomeGroup services automatically, but this does not solve the problem.

  If I forgot something to write, or you need more information, do not hesitate to ask.

  I'd appreciate any help really.

  Hello

  Manually check manufacturers sites WiFi because pilots offered through
  Updates Windows will most often not be later (MS is far behind certifying)
  drivers and many manufacturers do not quickly submit newer versions or not at all). See
  Manual driver update of the methods below.

  The question could be WiFi in fact however try to device (hardware)
  update the driver first.

  What antivirus/security is used? Some of those who will cause problems with the
  Homegroup. Since it happens more often on a single computer that on there
  a check.

  From this link:

  Homegroup: frequently asked questions (also shows how delete and remove homegroup)
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  "Only people who belong to the homegroup can see shared libraries. You can also share libraries or files and individual folders with specific people in your homegroup, rather than share them with everyone. For more information, see libraries with your homegroup sharing and keep files and folders to be shared with a specific residential group. »

  Share files with anyone
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  ==================

  How to upgrade manually the drivers:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
  7 love the updated drivers.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to get Adobe Bridge CS5 to open a FLV file in another program?

  Hello people,

  How can I get Adobe Bridge CS5 to open a FLV file in another program other than Flash CS5?

  When I double click on a FLV video, it always opens Flash CS5.  I want to be able to use one of my other apps of FLV Player instead.

  Thank you

  How can I get Adobe Bridge CS5 to open a FLV file in another another program

  that Flash CS5?

  When I double click on a FLV video, it always opens Flash CS5.  I want to be

  able to use one of my other apps of FLV Player instead.

  Single use when having pointing the cursor on the file with the right mouse

  Click on choose open with and select the application you want in the fly out

  menu.

  For permanent use, go to the section of the Bridge preferences file Association of Type and

  in the search the .flv file extension list. In this line, you can select the

  small triangle next to the Adobe flash and from the list select the one you

  wish, you can now open in this application.

• How to open the pdf files from hotmail.

  OMG no body can help with this question, how to open the pdf files from hotmail

  OMG no body can help with this question, how to open the pdf files from hotmail

  Told you that you need Adobe Reader, which is designed to open pdf files?

  Download Adobe Reader:

  http://www.Adobe.com/products/reader.html

• I can't open the RAW files from my Nikon D800 (i.e. NEF files).  I use a Mac with Photoshop CS5 and El Capitan 10.11.2 version running.  I get a message "could not complete your request because the file appears to be a model of camera that is n

  I can't open the RAW files from my Nikon D800 (i.e. NEF files).  I use a Mac with Photoshop CS5 and El Capitan 10.11.2 version running.  I get a message that "could not complete your request because the file appears to be a model of camera that is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for more information. "Yet the Nikon D800 is on the list of supported devices.  Can anyone help?

  And temporarily disable the Gatekeeper by allowing downloads from anywhere, or your installer will be marked as 'damaged' because that CS5 is out before Gatekeeper and is not "signed" that is not approved.

  

• I can not open my Raw files from my new Nikon 810. With my Nikon 800 I use Bridge to select and then it opens to the PS CS5. To make it work with 810 I download the DNG Converter, but I still can't open the files.

  I can't open my Raw files from my new Nikon 810. With my Nikon 800 I use Bridge to select and then it opens to the PS CS5. To make it work with 810 I download the DNG Converter, but I still can't open the files. What can I do?

  Hi ulcabeek,

  Greetings!

  What version of DNG converter that you use?

  You need DNG converter 8.6 for this: 8.6 camera Raw and DNG Converter 8.6 now available

  Concerning

  Jitendra

• Cannot open a pdf file from the website of immigration canada. Gets a message - you need a later version of the same player after update still not working

  Cannot open a pdf file from the website of immigration canada. Gets a message - you need a later version of the same player after update still not working

  10 Windows Internet Explorer with the Acrobat Reader plugin is available.

• I can't open the raw files from my Nikon d7100 in CS6. The plugin raw of SP6 is version 7.0 when my camera requires 7.4 apparently. What can I do?

  I can't open the raw files from my Nikon d7100 in CS6. The plugin raw of SP6 is version 7.0 when my camera requires 7.4 apparently. What can I do?

  You can download the plugin from 8.3 camera setup, which should work on windows xp

  http://swupdl.Adobe.com/updates/OOBE/aam20/win/PhotoshopCameraRaw7-7.0/8.3.52/Setup.zip

  If the above does not work you can use the manual install method explained here:

  8.3%20on%20Mac%20OS https://helpx.adobe.com/x-productkb/multi/Camera-Raw-84-Support-Policy.html#Revert%20to%20

• Downloaded Camera Raw plugin 9.1, but 13 elements still does not allow me to open the raw files from Nikon D750

  Downloaded Camera Raw plugin 9.1, but 13 elements still does not allow me to open the raw files from Nikon D750. Why?

  Did you install that you downloaded?

• I have 12 items. I just downloaded the most recent update. It will not open the RAW files from my Panasonic TZ70?

  I have 12 items. I just downloaded the most recent update. It will not open the RAW files from my Panasonic TZ70?

  See the faq for the compatibility of ACR:

  FAQ: Photoshop Elements will work with my camera, or why does not open my raw files?

  Your camera would need ACR version 9 which is not supported by 12 elements.

  You can:

  -upgrade to 13 items, with updates of version 13.1.1

  - or use the free DNGconverter mentionned in the links at the bottom of this faq. You'll be able set of entire folders to convert your raw files to DNG PSE12 can read and modify.

• Cannot open my raw files from my Panasonic fz1000

  Cannot open my raw files from my panasonic camera fz1000 can anyone help please

  See:

  Camera Raw plugin | Supported devices

  You need camera raw 8.6 version which is standard in PSE13.

  If you have an older version of elements, consider using the free DNGconverter of Adobe to convert a batch of raw files to DNG format that will open your version of the item.

• How to copy the database using rman file from another location.

  You can clone data base using the files of rman backup from somewhere else (on the server to clone).
  
  I have two server db source and clone db server.
  I normally copy the files of RMAN backup to clone server (under the same folder structure, as it was on the source server).
  
  The purpose of the test, IE I don't have same partition and free space on the source server and the clone.
  
  I usually use under notes to the clone.
  http://trysellit.com/hosting/Ttrail/Fajr.php?doc=wtrail & ND = 0556200
  
  I would try to explain for example again.
  In source server, my rman backup are stored in / U01 and clone server, I copied the files of rman /u04. What step I should take to clone to work anywhere else?
  
  Using Oracle 10 g on Linux RedHat.

  sape007 wrote:
  Thanks Ken & PrafullaNath.

  BUT my question is: how to transport .dbf files in another place on the clone (I already do).

  Rather:
  The clone is on another server. How to restore by copying the RMAN files from another location on the clone. Please read description above in its entirety.

  Sorry for not being clear.

  Please see my video tutorial. In this tutorial that I take backup of the database, copy the backup to the different server and perform a recovery disaster

• I can't view the PDF files from another without them will open

  I got the adobe acrobat 7.0 version 7 installed on my pc

  When I've upgraded to version 9.0, I can see no longer the coverage of pdf files

  How can I view PDFs from another without opening them

  Note please the divergence between these photo

  front

  

  After

  

  the problem because my windows is 64-bit

  I found a patch file, I try and it works

  Download

  http://www.pretentiousname.com/adobe_pdf_x64_fix/#downl

• How to open. VMO files from the old program from Microsoft called makeover

  Several years ago I purchace one program, I thought to be from Microsoft called makeover.  It's where you took a picture of a person and with the program changed their hairstyle, color, features of the face.  Found a disc I scored some photos of my kids we did together at a family event, and they are .vmo files and would like to know if there is a patch to open.

  Hello

  1. which version of the operating system are you using?

  2. What is the full name of the software?

  3 are those files that have been saved from another computer?

  4. do you have the media to reinstall the software?

  5. If you are unable to install the software, you can install in compatibility mode?

  Check out the site mentioned below for instructions on how to install a program in compatibility mode.

  Make older programs in this version of Windows

  http://windows.microsoft.com/en-us/windows7/make-older-programs-run-in-this-version-of-windows.

• I want to open a PDF file from a web site on my iPad, but it opens in iTunes

  I want to open a PDF file of a web site on my iPad, but it opens in itunes

  Hello

  When you click a link to a PDF on a web page, Apple integrated PDF Viewer displays the PDF document in Safari.  However, there is no other choice 'Open in Adobe Reader' when you press the share icon on the right side of the top toolbar of Safari.

  1. tap on the PDF document to display another bar below the top tool bar.

  2. tap on 'Open in Adobe Reader' (if indicated) or ' Open in...» ».

  

  3. Select "Copy of Adobe Acrobat" in the menu that appears.

  

  You can also check out the link to open the PDF from different sources.

  How to open PDF documents in Adobe Reader (iPad on iOS version 7)

  Let me know if it helps.

  Thank you

  Abhishek