OpenManage Essentials - update error on PE610 systems

Hello

After completing the updates of systems on the server PowerEdge 610, I went back to OpenManage Essentials to refresh the inventory.  Then, I went to the update systems, and click on the check box of the PE610 that I've just updated and I got this pop up window error:

This device does not have the minimum supported version of update iDrac.  Upgrade to a newer version of the iDrac.

I went to Dell.com Support section and not sure what to install.  Could someone please indicate the installation file?  This will force me to reboot the server?

Thank you.

You can try to remove and to rediscover this system to see if it pulls the correct information of the iDRAC?

Tags: Dell Servers

Similar Questions

  • Security Essentials update error code: 8004FF01

    I tried to install the Ess s. client to update and getting error code: 8004FF01

    Hello

     
    What is the description of the update that you are trying to install?

    I suggest you try the steps mentioned below.
    Method 1: Download and run the diagnostic to troubleshoot issues with Windows update.

    The problem with Microsoft Windows Update is not working:

    Method 2: Try to reset components to update Windows from the following link, which would help you to install the updates of windows.

    Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    322756 (http://support.microsoft.com/kb/322756/)
    How to back up and restore the registry in Windows.
    Check if you can install the update.

    Method 3: If the problem still persists I suggest you to set up your computer in a clean boot state, and check to see if the same problem happens.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
     
    If the problem is specific to the Microsoft Security Essentials update, you can post the question in the Microsoft Security Essentials community for assistance.


    Hope this information is useful.
  • 800 b 0100 Windows Update error even after system update readiness tool

    The last time I tried to install updates, an update installs with update error 800b0100.  I have downloaded and run the system tool in the proposed aid system but I still get the same error.  I use 32 bit Windows Vista Home Premium Service Pack 2 on a dual-boot Apple iMac.  What should I do now?

    Hi Michael,

    1 update you are trying to install?

    2. have you tried to install the update manually?

    Method 1:

    You can run scanning of the file system [SFC] checker on the computer which will replace missing or corrupt files & try to install the stand-alone update package.

    For more information, you can consult the following link.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    Method 2:

    After you run the analysis, you can try to download and install the standalone update package.

    a. to download updates from the Microsoft Download Center

    b. Enter the item number in the field search and download the same.

    c. double-click on the downloaded file.

    d. click on run and follow the wizard to install it.

    Hope this information is useful.

  • Fixing of Windows Update error 80070490

    I tried the Windows Update error correction. System update readiness tool has not corrected the problem. When I insert the Windows DVD, I get to the step 6 which asks which type of installation, I want. When I try to click on upgrade, it says updating has been disabled. Any other suggestions? Help!

    Hi NancyTC,

    You can consult the following thread link and check the suggestions provided by Halima S, technical support engineer.

    Try to do an upgrade of in place to solve the problems on my vista Home premium, but running in a message which says "has been disabled.

    Hope this information is useful.

  • does not not windows genuine update error code 8e5e03fa, essentials security error code 0 x 80070643 installation.

    Buy laptop new 14 months ago, recently a window pops up saying not using windows.cannot real installation security error code 0x80070643.cannot essentials install windows updates error code 8e5e03fa.my OS is windows 7 Home premium 32-bit.

    [[@Noel: an error 0 x 80070643 when you try to install MSE is usually associated with the failing (1) in order to remove any previously installed apps/AV security suites (i.e., Norton & McAfee 'leftovers') and (2) a pre-existing infection.]] See Installation error 0 x 80070643. See also Genuine Windows Validation error with MS Security Essentials. ]]

  • Update ERROR for Microsoft Office 2007 System (KB967642)

    Hi dear friends,

    I use windows vista Home Premium, I got error in the update of my system. If anyone knows that all other links that can help remove problems in the system update, answer me or send me an email to * address email is removed from the privacy *.

    Update ERROR for Microsoft Office 2007 System (KB967642)

    ----------------------------------------------------------------------------------------------------------------------------------------------------------

    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1ac22653-38d6-4ce7-8F04-f0a0222a353a

    Page not found

    We're sorry, but the requested page is not found. Please check your typing and try again or use the options on this page.

    ----------------------------------------------------------------------------------------------------------------------------------------------------------

    concerning

    Hassan Salmat

    Hi H-S-M-P,.

    ·        You are able to install some other updates on your machine properly?

    ·        What is you receive the exact error message?

    (a) you can manually download the update from this link.

    Update for Microsoft Office System 2007 (KB967642)

    (b) thereafter, set up the computer in a clean boot state and try to install the update. It will start Windows Vista by using a minimal set of drivers and startup programs and helps eliminate software conflicts.

    The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

    Note: Please make sure that the computer is configured to start as usual by following step 7 of article after the installation of Service Pack 1: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135

    If you are unable to install only this particular update, you can also ask your question in the support forum Microsoft Office .

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • "Error loading operating system" after windows update

    I have an ASUS EeePc netbook model: 1005PEB. Last night before going to bed, I stopped the netbook and it has begun to install and configure windows was last updated. I left on the office do its thing and went to bed. This morning, I got the netbook and it went out of the car and it turned on while I was about to leave the House (before ask you, no I ' was not flying). He started installing all the updates that it had installed the night before. It has gotten to the point where it installed the last element and hung up there. I leave a this screen for 45 minutes and nothing has changed. I went against my better judgment and off the netbook. When I went immediately to turn it back on all I get is "error loading operating system". I tried to use F8 to try to start it in safe mode and I can always access the BIOS. How do I get this service still? I don't have really any data here, I'm too preoccupied. Thanks for any help anyone can offer.

    Hi argyle_83,

    Were you able to boot into safe mode?

    This problem can occur if your computer's BIOS does not correctly manage or support the capacity of the hard disk on which you install Windows 7. You can try the steps below to resolve this issue.

    Method 1: Obtain the latest BIOS updates

    WARNING: This article contains steps that may involve changing your BIOS or parameters of semiconductor (CMOS) to complementary metal oxide, or that may require you to make physical changes to your computer hardware. Incorrect changes to the BIOS of your computer may cause serious problems. Microsoft cannot guarantee that problems resulting from changes to your BIOS can be solved.

    Your first step to solve the problem of the error loading operating system should be updated to your computer BIOS.

    Contact the computer manufacturer to find out how to obtain and install the latest available for the computer BIOS update.

    Find information of BIOS on your Netbook from this link.
     

    Here are answers to some common questions on the basis of input/output system (BIOS).

    BIOS: Frequently asked questions

    Method 2: Run the Startup Repair

     

    Startup Repair is a Windows Recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting.

    Refer to this article for more details.

    What are the system recovery options in Windows 7?

    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Service Pack 3 Setup error: "Service Pack 3 Setup cannot update an active (debug) system with a free (retail) version of Service Pack 3, or vice versa"

    Service Pack 3 Setup error: "Service Pack 3 Setup cannot update an active (debug) system with a free (retail) version of Service Pack 3, or vice versa"

    I have XP SP3 download Tuff. I have a Dell Inspiron 16000 w / XP Edition home (version 2002) W / SP 2 is installed.  I couldn't find a reference to the error in line last night.  Can anyone help?

    Turbo Tax 2011 says that I can not download their stuff until I get my XP Stuff to the height.

    Only 6 more days until what the tax man will come :-)...

    Help!

    Put your search inside the quotes term allows when you search for the exact error messages:

    "Service Pack 3 installation cannot update an active (debug) system with a free (retail)"

    The first shot has the answer: http://www.askvg.com/windows-xp-sp3-setup-error-cannot-update-a-checked-debug-system-with-a-free-retail-version-of-service-pack-3/

    CurrentType at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion value should read "Uniprocessor Free" or "free multiprocessor".

    John

  • Problem area: windows update; Error: TRUST_E_NOSIGNATURE (0x800b0100) __Message: installation error prevented the service pack 2 windows systems (KB948465) _

    Problem area: windows update; Error: TRUST_E_NOSIGNATURE (0x800b0100)
    Message: Installation error prevented the service pack 2 windows systems (KB948465)

    http://support.Microsoft.com/kb/956702

    «Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: «0x800B0100»»

    Method for Windows Vista or Windows Server 2008 to resolve this issue, run the tool (Checksur.exe) system update. To do this, follow these steps:

    1. Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

      947821 (http://support.microsoft.com/kb/947821/) Description of the update readiness tool for Windows Vista system
    2. Try to install updates again.

    http://support.Microsoft.com/kb/947821/

    "Description of the preparation tool system update for Windows Vista for Windows Server 2008 and for Windows 7"

    If the above solves the problem:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include this error Code, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • Blackberry updates & "unspecified error occurred during system restore.

    After installing updates to Blackberry, Blackberry sync would not work.  Tried restoring the system 6 - 8 times for restoration different dates.  None of the restoration system worked.  Still received the error message as "unspecified error occurred during system restore.  Any suggestions?  I ran out of restore points.

    Hello

    This can help you:

    1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

    2. try to use Safe Mode system restore.

    http://bertk.MVPs.org/html/restoresysv.html

    3 Malware will stop at the system restore.

    Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

    http://www.Malwarebytes.org/products/malwarebytes_free

    And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    See you soon.

  • My system will not download upgrades and assistant says update error 0x8024402c

    * Original title: win 7 64-bit ultimate on asus kgpe map server dual socket

    my system will not download upgrades and assistant says update error 0x8024402c (2016-03-29-T-10_53_07a)... whats up?

    Turns out that my computer has a virus, of which a part had apparently obtained in the area of the 100 MB of my raid0 array system.  When I reloaded the os I've removed then reinstalled the partitions, then reloaded the software and my problem calmed.  Thanks for your ideas.

  • Update error, does not download after system upgrade

    My laptop Sony all in one was running 8.1 and started running slow, so I did a refresh in assist mode, sony has.  It did not work would not recover from the start that I did a complete system and it worked. However, now every time I try to update everything to go back to windows 8.1, im stuck at windows update is download, but it is not at all.  I did windows update troubleshooting and 3 erros jumped to the top and 2 of the three say fixed, while one said detected, but not fixed.  Why can I update, or better yet, how to find the files that I'm missing and re install? Help, please...!

    Problems found
    Search for the missing or corrupt
    files
    Check
    for missing or corrupted files
    Detected
    Fix missing or corrupt files
    Completed
    Windows Update error code
    0 x 80070057(2014-03-09-T-01_51_39P)
    Windows
    Update error 0 x 80070057(2014-03-09-T-01_51_39P)
    Fixed
    Store data to reset Windows Update
    Completed
    Recent installation problems
    updates
    Problems
    installation of recent updates
    Fixed
    Fix Windows Update
    Completed
    Potential problems that have been verified
    Environment of Windows Update
    the variables are incorrect
    Windows
    Environment variable update are incorrect
    There is no question
    Some security settings are
    missing or changed
    Some
    security settings are missing or have been modified
    There is no question
    Registration for the service is missing or damaged
    Service
    registration is missing or damaged
    There is no question
    Windows Update Services are not running
    Windows
    Update Services are not running
    There is no question
    Encryption services components are not
    registered
    Cryptographic
    service components are not registered
    There is no question
    Problems found
    Detection

    Details
    6
    Search for the missing or corrupt
    files
    Detected
    Fix missing or corrupt files
    Completed
    Output of the SFC
    Output: Windows resource protection did not find no integrity
    These violations.
    6
    Windows Update error code
    0 x 80070057(2014-03-09-T-01_51_39P)
    Fixed
    Reset Windows Update data

    store
    Completed
    DataStoreAndWULogFiles.zip
    18.77 MB
    Name of the file: DataStoreAndWULogFiles.zip
    6
    Recent installation problems
    updates
    Fixed
    Fix Windows Update
    Completed
    Windows repair
    Update of services and

    dependencies
    Potential problems that have been verified
    Details of detection
    Windows Update environment variables
    are incorrect
    There is no question
    Some security settings are missing
    or have been changed
    There is no question
    Registration for the service is missing or
    Corrupt
    There is no question
    Windows Update services are not
    running
    There is no question
    Encryption services components
    is not registered
    There is no question
    Details of detection
    Error report
    RootCause: RC_DataStore
    Error code: 0 x 80070057
    TimeDetected: 2014-03-09-T-01: 51:39 P
    Collected files
    Name of the file: CheckSURLog.cab
    The service status
    Problem with the BITS service: the requested service has already been
    has started. More help is available by typing NET HELPMSG

    2182.
    Collection information
    Computer name: THEDARKNIGHT
    Version of Windows:
    6.2
    Architecture:
    x 64
    Time:
    Sunday, March 9, 2014 01:50:24
    PM
    Publisher details
    Background Intelligent Transfer Service
    Find and solve problems that
    can prevent work background downloads
    Package version:
    1.2.1.20131113
    Publisher:
    Microsoft Corporation
    Windows Update
    Find and fix problems with
    Windows Update
    Package version:
    8.1.1.20131113
    Publisher:
    Microsoft
    Corporation

    Twhite1288,

    I suggest you to see Help links and check if it helps.

    Difficulty errors Windows Update corruption as 0 x 80070002 and 0 x 80070057

    http://support.Microsoft.com/kb/947821

    Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

  • PC Windows 7 64 Player update. Error 2: The system cannot find the specified file

    Impossible to update Adobe Reader on PC under Windows 7 Home Premium 64 & Mozilla Firefox. Error 2: The system cannot find the specified file.

    I tried several times, now my v9.4.1 player is not supported.

    1. Uninstall Reader 9.x
    2. install the latest version of the reader to http://get.adobe.com/reader/enterprise/
  • In Vista Home Premium SP 2, I can't update: error 80070490. (I can update Security Essentials) None of the tools / corrections / convenience stores solves this problem. Is there another way I can fix my windows.

    FixIt / Forums / Automatic troubleshooting / scannow / etc all tried without success; It will not update. None of the tools / corrections / convenience stores solves this problem. My installation disc was done by oneself as the HP computer came with a disk.  Is there another way I can fix my windows.

    http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490

    Read the above, there are two options if the first does not work try the other.

  • Windows Update error error number: 0x80072EFF

    I think windows update error error number: 0x80072EFF by updating my PC. I am also getting Generic Host Process error and after I get one that I get a few redirects and a lot of functional point of view.

    I tried all the solutions for the process generic host for win32 services has encountered a problem of error and none have worked.

    HIJackThis log

    Logfile of Trend Micro HijackThis v2.0.4
    Scan saved at 15:34:27, on 12/29/2010
    Platform: Windows XP SP3 (WinNT 5.01.2600)
    MSIE: Internet Explorer v8.00 (8.00.6001.18241)
    Boot mode: Normal

    Ongoing process:
    C:\WINDOWS\System32\smss.exe
    C:\WINDOWS\system32\winlogon.exe
    C:\WINDOWS\system32\services.exe
    C:\WINDOWS\system32\lsass.exe
    C:\WINDOWS\system32\svchost.exe
    c:\Program Files\Microsoft Security Essentials\MsMpEng.exe
    C:\WINDOWS\system32\spoolsv.exe
    C:\Program Files\Java\jre6\bin\jqs.exe
    Files\Fichiers Files\Motive\McciCMService.exe C:\Program
    c:\Program Files\Fichiers SharedCOM Shared\9.0\SharedCOM\RoxWatch9.exe
    c:\Program Files\Fichiers SharedCOM Shared\9.0\SharedCOM\RoxMediaDB9.exe
    C:\WINDOWS\Explorer.exe
    C:\WINDOWS\RTHDCPL. EXE
    C:\WINDOWS\system32\igfxtray.exe
    C:\WINDOWS\system32\hkcmd.exe
    C:\WINDOWS\system32\igfxpers.exe
    C:\WINDOWS\system32\igfxsrvc.exe
    C:\Program Files\Verizon\McciTrayApp.exe
    C:\Program Files\Fichiers Java Update\jusched.exe
    C:\Program Files\Microsoft Security Essentials\msseces.exe
    C:\Windows\System32\svchost.exe
    C:\Program Files\Messenger\msmsgs.exe
    C:\WINDOWS\system32\ctfmon.exe
    C:\Program Files\Mozilla Firefox\firefox.exe
    C:\Program Files\Mozilla Firefox\firefox.exe
    C:\WINDOWS\system32\dwwin.exe
    C:\Windows\System32\svchost.exe
    C:\Program Files\Mozilla Firefox\firefox.exe
    C:\Program Files\Mozilla Firefox\firefox.exe
    C:\WINDOWS\system32\wuauclt.exe
    C:\WINDOWS\system32\msiexec.exe
    C:\Program Trend Micro\HiJackThis\HiJackThis.exe

    R0 - HKCU Software Microsoft Internet Explorer Main, Start Page = http://www.yahoo.com/
    R1 - HKLM Software Microsoft Internet Explorer Main, Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157
    R1 - HKLM Software Microsoft Internet Explorer Main, Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896
    R1 - HKLM Software Microsoft Internet Explorer Main, Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
    R0 - HKLM Software Microsoft Internet Explorer Main, Start Page = http://go.microsoft.com/fwlink/?LinkId=69157
    F2 - REG: UserInit = userinit.exe
    O2 - BHO: AcroIEHelperStub - {18DF081C-E8AD-4283-A596-FA578C2EBDC3} - C:\Program Files\Fichiers Files\Adobe\Acrobat\ActiveX\AcroIEHelperShim.dll
    O2 - BHO: Verizon SMB Toolbar - {A057A204-BACC-4D26-DFC4-79A09BF76BC9} - C:\PROGRA~1\vzsmbtb\vzsmbtb.dll
    O2 - BHO: Google Toolbar notify BHO - {AF69DE43-7D58-4638-B6FA-CE66B5AD205D} - C:\Program Files\Google\GoogleToolbarNotifier\5.1.1309.3572\swg.dll
    O2 - BHO: Java (TM) plug-in 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:\Program Files\Java\jre6\bin\jp2ssv.dll
    O2 - BHO: JQSIEStartDetectorImpl - {E7E6F031-17CE-4C07-BC86-EABFE594F69C} - C:\Program Files\Java\jre6\lib\deploy\jqs\ie\jqs_plugin.dll
    O3 - Toolbar: Verizon SMB Toolbar - {A057A204-BACC-4D26-DFC4-79A09BF76BC9} - C:\PROGRA~1\vzsmbtb\vzsmbtb.dll
    O4 - HKLM\... \Run: [RTHDCPL] RTHDCPL. EXE
    O4 - HKLM\... \Run: [Alcmtr] ALCMTR. EXE
    O4 - HKLM\... \Run: [IgfxTray] C:\WINDOWS\system32\igfxtray.exe
    O4 - HKLM\... \Run: [HotKeysCmds] C:\WINDOWS\system32\hkcmd.exe
    O4 - HKLM\... \Run: [persistence] C:\WINDOWS\system32\igfxpers.exe
    O4 - HKLM\... \Run: [Verizon_McciTrayApp] "C:\Program Files\Verizon\McciTrayApp.exe".
    O4 - HKLM\... \Run: [SunJavaUpdateSched] "C:\Program Files\Fichiers Java Update\jusched.exe"
    O4 - HKLM\... \Run: [MSSE] "c:\Program Files\Microsoft Security Essentials\msseces.exe" - hide - runkey
    O4 - HKLM\... \Run: [adobe Reader Speed Launcher] "C:\Program 9.0\Reader\Reader_sl.exe Adobe."
    O4 - HKLM\... \Run: [adobe ARM] "C:\Program Files\Fichiers Files\Adobe\ARM\1.0\AdobeARM.exe".
    O4 - HKCU\... \Run: [MSMSGS] "C:\Program Files\Messenger\msmsgs.exe" / background
    O4 - HKCU\... \Run: [ctfmon.exe] C:\WINDOWS\system32\ctfmon.exe
    O8 - Extra context menu item: E & xport to Microsoft Excel - res: / / C:\PROGRA~1\MICROS~2\Office12\EXCEL. EXE/3000
    O9 - Extra button: send to OneNote - {2670000A-7350-4f3c-8081-5663EE0C6C49} - C:\PROGRA~1\MICROS~2\Office12\ONBttnIE.dll
    O9 - Extra 'Tools' menuitem: S & end to OneNote - {2670000A-7350-4f3c-8081-5663EE0C6C49} - C:\PROGRA~1\MICROS~2\Office12\ONBttnIE.dll
    O9 - Extra button: research - {92780B25-18CC-41C8-B9BE-3C9C571A8263} - C:\PROGRA~1\MICROS~2\Office12\REFIEBAR. DLL
    O9 - Extra button: (no name) - {e2e2dd38-d088-4134-82b7-f2ba38496583} - C:\WINDOWS\Network Diagnostic\xpnetdiag.exe
    O9 - Extra 'Tools' menuitem: @xpsp3res.dll,-20001 - {e2e2dd38-d088-4134-82b7-f2ba38496583}-C:\WINDOWS\Network Diagnostic\xpnetdiag.exe
    O9 - Extra button: Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:\Program Files\Messenger\msmsgs.exe
    O9 - Extra 'Tools' menuitem: Windows Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:\Program Files\Messenger\msmsgs.exe
    Ø16 - DPF: {01113300-3E00-11D2-8470-0060089874ED} (Support.com Configuration class) - https://activatemydsl.verizon.net/sdcCommon/download/DSL/Verizon%20High%20Speed%20Internet%20Installer.cab
    Ø16 - DPF: {05D44720-58E3-49E6-BDF6-D00330E511D3} (StagingUI Object) - http://zone.msn.com/binFrameWork/v10/StagingU

    He did had a System Tools 2011 virus that seems to have disappeared. But also, which took place on 12/24. It seemed to have disappeared, but it has problems since.

    Please see step 22 and 23 here like system tools is known for manipulating the hosts file:Remove System Tool

    Once your hosts file is OK, then strongly suggest , using Internet Explorer, you have the system scanned from here:
    OneCare Protection scanner

    NOTE: I see that you have several threads going about this infected system. The only that this system can never be approved again is at each startup of a Linux-based rescue CD or to do a clean install of Windows.

    Kaspersky offers such a rescue CD is well to clean heavily infected systems as the hard drive is not Active when the system is booted from the CD -Kaspersky Rescue Disk 10

    Expert MowGreen Windows IT Pro - consumer safety

Maybe you are looking for