OpenManage statement of the CPUS 'Speed' vs speed of processor question

Hello

We have two identical (different config then RAM) installed PowerEdge R510 with Open Manage 7.3.0.   Both are duel Intel Xeon E5520 2.27 Ghz processors in them.

When you look at the details of the processor to the OM, on a single server, the two processors show 1600 MHz under the 'speed '.   On the other server, it displays 'speed instant "at 2266 MHz. '.

Can someone tell me why one server CPU not running at full speed (only 1600 MHz)?  The configuration of the RAM play in this?

Thank you.

FYI, I figured this out. It was in the power settings in the BIOS. It has been set to Custom > low energy consumption. Apparently, this requires to run at a slower speed of the processor. I changed the parameters 'Maximum Performance' and equipped with rear ramps to 2.27 Ghz.

Tags: Dell Servers

Similar Questions

  • How can I change the initial connection speed in the State of the connection to the Local network?

    Default value is always 100.0 Mbps.  I need to account for 3-5 Mbps for the chart on the scale correctly in task mgr.

    Salvation of yesteryear,

    I suggest you have a look at the following link:

    Local area connection status does not show the correct speed

    I hope this helps.

  • Windows Vista cannot access the internet, the link speed and Duplex negotiation seems to be the problem

    I have a desktop running Windows Vista Home basic and I can't connect to the internet through a local network, which is connected through a router (Belkin). Adapter type is Internet: Intel 825562V-210/100

    After consultations with the support of technichal society of router and my PC vendor, it seems that there is aproblem with negotiating the link speed. Here are some symptoms:

    I can access the internet if I connect the cable directly to the modem;

    Connected through the router, I can sometimes connecting to the internet if Imaually change settings of connection speed (10 / 100 Mbps, half/full duplex)

    All other PC connected to the network, using Win Vista and throuhg connected to the same router, have access to the network;

    If I connect my network cable to another PC, it will have access to the internet;

    The status of my PC seems to be 'connected' on the site of implementation of routers. The State of my connection is sometimes "Local only" sometimes "Local and Internet", but in fat, there is no internet access.

    I tried the following:

    Trouobleshooting under the direction of the technical support of the router and PC vendor.

    Update the operating system to restore to an earlier date, to restore to the factory settings; Reformatting my PC 2 times, (first internet worked for a few hours only); update the OS (by connecting directly to the modem); Turning off Win Defender, removing software antivirus. Reset LAN connection...

    Any suggestion please?

    New router solved the problem.

    Thanks a lot, especially Jack :-).

    P.J.

  • My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

    My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

    A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.

    Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.

  • Is it possible to make the new panel downloads show the current speed of a download?

    With the new Panel of downloads, the current speed of the download is missing. It is heavy to have to click on view all downloads and open another windows just to see the current speed. Is it possible to add the current speed of a download to the download Panel?

    The only solution I found is complicated, and it must be repeated whenever Firefox is updated. I will try to explain it as simply as possible.

    1 paste the following address into the address bar and press ENTER.

    • chrome://browser/content/downloads/download.xml#download

    2 copy the code to the Clipboard. The part of the code is the stuff that is applied on a white background (although the color may be different on your configuration). It starts after the notification at the top that says: "this XML file does not appear to have any information of style associated with it. The document tree is shown below. « ; do not copy the opinion itself.

    3. start a text editor such as Notepad and paste the contents of the Clipboard.

    4 change id = "downloadBindings" of id = "downloadBindings-mod"

    5. change id = 'Download' id = "Download-mod"

    6. search for class = "downloadDetails" (Note: in the current version, there are two of these instances in the file). On the same line, change the text fragment xbl: inherits = "status = value to xbl: inherits =" value = statusTip

    7 open your Firefox profile folder. In this folder, create a new folder named chrome if there is no such thing as a folder with that name already.

    8. save the file as downloadSpeed.xml in the subfolder chrome in your profile folder.

    9. in this same folder, create a new text file named userChrome.css. Please note that the file name is case-sensitive, and that Windows HIDES file extensions by default, which could result in the file named userChrome.css.txt.

    10. in the userChrome.css file, put the following CSS code. If the first line is already present in the file (in which case you already have a userChrome.css file), do not include it.

    @namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
    
    richlistitem[id^="downloadsItem_"] {
      -moz-binding: url("downloadSpeed.xml#download-mod") !important;
    }

    As an alternative to step 10, you can use the CSS code in the extension of the elegant place. In this case, you must include the full path to the downloadSpeed.xml file, for example:

    @namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
    
    /* Show speed in downloads arrow panel */
    richlistitem[id^="downloadsItem_"] {
      -moz-binding: url("file:///C:/Users/GingerbreadMan/AppData/Roaming/Mozilla/Firefox/Profiles/2xqh1840.default/chrome/downloadSpeed.xml#download-mod") !important;
    }

    Original on Mozillazine thread:

  • How to control the download speed

    Currently firefox downloads files to 220 Kbps. I want to limit the download speed at 100 Kbps. help, please.

    Firefox is not a way to limit the download speed.

    You will need to use an external Download Manager to get additional features like that.

    You can use the FlashGot extension to integrate an external Download Manager in Firefox.

  • ProBook 430 G3: Pleasure of the laptop cooling accelerates the low speeds constantly

    Hello

    I have a brand new HP Probook G3 of 430 who works and do everything just great, the only problem is his strange cooling fan noise.

    The problem is that it accelerates and accelerates downwards constantly without visible reason. (Please note that this is not normal behavior when coolers change from higher temperature of the processor speed). The interval between the top speed down is less than a second and it is constant. So imagine when cooler works on higher speed, it is not smooth, as it is supposed to be, but little wave / floating.

    I'm not sure with speeds laptos fans run, but if view the problem it will look something like shown below

    Action taken:

    • Updated the BIOS to the latest version - did not help.
    • Start the 'Fan always on AC Power while' - sounds even.

    Can anyone suggest anything to diagnose the problem of fan? Mayble there's some fan diagnostincs tools or anything else that can help.

    Thanks in advance for your suggestions.

    I will say that it is a hardware problem with the fan itself. You could try and blow with compressed air. There may be a clog of dust or something that is causing do drag, dislodge, then reclogging. Or the fan may be faulty.

    I would like to make a warranty case or if you can return it for a replacement that would be a good idea, too. The Probooks are fairly easy to work, and it's possible hP might just send you a new fan but I doubt little.

  • Satellite C660D - software to control the fan speed?

    Just brought a C660D. Someone knows the software to control the fan speed?

    My laptop CPU fan always turns to 74-80% of max speed. That's a lot of noise. I tried cpucool, but it did not work.

    If does not work, the fan speed will remain at the temperature of 0 with cpu at 38 oC. But with any operation tiny, like the click of the mouse, it will change again to 74%, CPU temperature does not change.

    Hi Polaralbatross,

    Have you ever tried the Eco mode that uses the cooling battery optimized method?

  • How can Qosmio G30-126 - I check the fan speed?

    MODEL: G30 - 126
    OS: VISTA 32-BIT SP2

    How to know the speed of the fan? I have try several programs like "sensor hw monitor" & "fan speed" but it's not watch everything think about the temperature of the CPU just fan speed.

    Where is the problem and what I need to do?

    Hmm... Why you want to know the speed of the fan?

    The fan speed will be automatically controlled and you can t change this or manually control. You can change the method of cooling between performance and battery optimized in Vista power management. Did you check that?

    In addition, you can clean the laptop using a jet of compressed air as Akuma written. This could blow out the dust from the cooling fans.

  • Satellite Pro M70-113: the modem speed is too slow

    Hello

    I have a satellite pro m70-113 laptop.
    The problem is that I am not able to web surf, when you are connected to the Toshiba software modem that is integrated, because the speed is too slow.
    Connecting about 40 Kbps, but I can't even open the yahoo site just because it's very slow. I mean it seems that there is no data transfer... I have to wait 5 min load yahoo.com!
    I tried uninstalling, reinstalling the drivers, but the problem is the same...

    And on the same telephone line, when I connect to the net on my desktop, I get a decent speed. If the problem is not telephone line or my ISP, but something on my laptop hardware modem, or its drivers.

    Please can someone help me...

    Thank you, hoping for an answer...

    Hello

    Please check the maximum speed of the port and set it to the maximum level. You can find it in the properties of the modem in Device Manager.

  • Is satellite A500-1DN - possible to adjust the fan speed?

    Is it possible to adjust the speed of the fan of this laptop? As I saw in PC Health monitor the fan speed is mainly of 0%, and sometimes it amounts to 70% (on idling) and quite large making noise.
    I wish to address is it permanently on.

    Is this possible?

    Hello

    > Is it possible to adjust the speed of the fan of this laptop? As I saw in PC Health monitor the fan speed is mainly of 0%, and sometimes it amounts to 70% (on idling) and make a big enough noise

    I agree with you, I also own a500-1dn and it makes big noise even while surfing Internet. This forum was suggested to update Bios to reduce the fan noise.

  • Can I adjust the speed of all the clips at the same time at the same speed in imovie10.1?

    I have a lot of slides / photos and prefer to adjust the speed of each of them at the same speed of s 3.0 at a time without going through each one.  When I do, it does not apply.  How can I do this?

    In iMovie 10.1.1 Select all photo clips in your timeline.  Click on the button info (an ' i' with a circle around it), top right of your screen. Enter your length of stay in the duration box that appears at the top right. Press return on your keyboard.   All your photos will now have the time that you set.

    Another way: before you open a new project, go to iMovie/preferences and set your default clip duration in the duration of clips.

  • Portege M400 is frozen, screen goes black and the fan speed increases when moved

    Can someone help me please?

    I recently received the Portege M400 from a friend 4 days ago and reformatted for Windows XP Tablet Edition.
    Everything's fine until I wanted to move the laptop to my coffee table, but as soon as I move the laptop it freezes, the screen goes black and the fan speed increases dramatically.
    So far I have had no success in the resolution of this problem and I really appreciated, is that someone could help me!

    Have you installed the OS using a Toshiba recovery media or you have installed the version of the OS?

  • HP Envy 23 Touchsmart SE d494: do not get the internet speed I think I'm supposed to

    I just upgraded my ISP service and should get up to 250 MB/s download, but get only around 95 Mbps, which is the same that I was getting before.  Looking at the specifications of my computer, it seems that I should have no problem getting the 250 Mbit/s speed.  Am I missing something or is there something I need to do?  Thank you.

    It turns out that the Cat 5 cable I was using was not allowing higher speeds, as I tried to replace it with another cable, I had and immediately got the faster speeds.  Now, I'm getting around 230 Mbps download.  Cool!

  • Satellite A500-1GL: 2 questions: the fan speed & graphic card driver failures

    Hello

    I have 2 questions, hopefully someone can help me with that.

    * The first question - quick fan *.

    I'm on online gamer second life and world of the craft of war) recently my fan speed crank up to 90 percent for about 5/10 minutes before leaving quiet. Then speed up again after a period of time. I'm confused as to why he did this because when I check my cpu temp is only make 40%, and I use a cool buffer table.

    I'm looking for some advise here because all said Toshiba was making sure I had the latest bios update. But I would have thought it is not the processor overheating the fan must not be crank that quickly. My laptop is only 2 months old.

    Can anyone help, should I be worried?

    * Second question - graphics driver *.

    Also on a couple of times I got my screen briefly go black and then recover. A pop up appears saying something along the lines of the core of the graphics card.... Driver recovered. It flashes if fast, that I never see the entire message. Don't you think that something is wrong with the graphics card? (card nividia geforce gt300m)

    I really hope that someone can offer more help that Toshiba has done, as I am a bit unhappy to be problems on a 2 month old laptop.

    Thank you for reading and I look forward to any Advisor.

    (> I'm on online gamer second life and world of the craft of war) recently my fan speed crank up to 90 percent for about 5/10 minutes before leaving quiet. Then speed up again after a period of time. I'm confused as to why he did this because when I check my cpu temp is only make 40%, and I use a cool buffer table.
    > I'm looking for some advice here because all said Toshiba was making sure I had the latest bios update. But I would have thought it is not the processor overheating the fan must not be crank that quickly. My laptop is only 2 months old.

    The cooling fan is controlled by the fan table in the BIOS. Fan table contains information about the temperature and the fan speed that means the depands on some level temperature fan speed.
    Over all the possible game features as the CPU, GPU, produce heat and the heat dissipation is high
    Cooling modules would begin to turn faster if the temperature level would be exceeded
    This is nothing exceptional everything at stake

    > Also on a couple of times I got my screen briefly go black and then recover. A pop up appears saying something along the lines of the core of the graphics card.... Driver recovered. It flashes if fast, that I never see the entire message. Don't you think that something is wrong with the graphics card? (card nividia geforce gt300m)

    I read on a similar question, and apparently, the graphics card DRIVER crashed during games
    Maybe it's a compatibility problem between game and pilot
    In most cases the graphics card driver update should fix this and I read on some forums that it has helped in many cases

Maybe you are looking for