Windows Vista cannot access the internet, the link speed and Duplex negotiation seems to be the problem

Similar Questions

• Do I need another new Windows Update to activate my Windows Vista to access the free secure recommended downloadable program for downloading various files and any other information you want?

  Original title: I need an another new Windows Update to activate my Windows Vista to access the downloadable recommended secure free program for downloading various files and any other information you want? Thank you! Randle

  Please help if you have the time giving me the name of a free secure downloadable software that works for Windows Vista, when the word is not on my PC for

  downloadind attached to power open, save, display, print and other means that this downloadable can help. I would be very grateful for your help! I works but not Word and PowerPoint if you have any suggestions that will be very solve my delimma of not be able to successfully download these things I just Gillies

  Your expert advice, patience, attention to my request, time, are all valuable and appreciated! Thanks again and have a wonderful day! Randle

  Hello Randle,

  You can use your favorite search engine & download any third-party software that might be used to.

  
  Note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

  Hope the helps of information.

• Windows Vista cannot complete the update of windows since July 2016

  Windows Vista cannot complete the update of windows

  Since the last update July 2016

  no error message, just perpetually "check updates".

  everything I start the update of windows

  help please

  Hi emiquestion:

  Long 'check for updates...' crashes and slow window updates are a currently a problem common to many users of Vista SP2 - please see the workaround suggested, I posted yesterday over BluesBlaster WINDOWS VISTA 32-BIT updates.

  Note that it is a temporary workaround and updates slow Windows will probably return each Patch Tuesday (the second Tuesday of the month) after Microsoft also releases a new batch of updates to security for Vista SP2 and IE9.  Since September 2016 Patch Tuesday updates are published tomorrow (13-Sep-2016), it would be wise to wait a day or two to execute step-by-step instructions posted on June 16, 2016, in m #l's thread of updates does not, he has been looking for updates for hours and save yourself a bit of extra work this month.  Dalai normally updates its list of Windows kernel mode driver (Win32K.sys) implemented to date required the same evening that the Patch Tuesday, updates are published by Microsoftto the http://wu.krelay.de/en/ .
  ------------
  32 bit Vista Home Premium SP2 * Firefox v48.0.2 * NIS v22.7.1.32 * MMFA Premium v2.2.1
  HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS

• Automatic update of Windows for my Vista Business hung on Jan 6, 10. He tried to uninstall automatically... now says that I have to reinstall Windows. Cannot access the Internet, cannot restore, can't do anything

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: How to restore?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

  FYI
  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista#section_3
  Reinstall Windows Vista when you want to restore the default Windows settings or when you are having problems with Windows and that you need to reinstall it by performing a clean installation. TaurArian [MVP] 2005-2010 - Update Services

• Computer Windows 7 cannot access the files on computer Vista but Vista is started the last. Both lasted upgrades of the operating system.

  Both have the latest upgrades of the operating system. Both are running the same version of MacAfee. He used to work without problems up to several weeks, there may be a problem of automatic update but I don't know. Disabled the two walls of fire, nothing works. Cable network Ehternet WORKGROUP. Windows 7 computer can access files through their prorgrams course that Thunderbird (save the attachment without problems) or previously network drive is available. Just Windows Explorer does not see the computer. As soon as I restart the Vista computer, it is visible in Windows Explorer. It's the computer Vista is a central workstation with others and inspires other users that connect at different times of the day that the central computer must be restarted for full access. XP-based computers do not have a problem and can access the files at any time. It is the only computer of Vita.

  Hello

  Follow these steps and check if that helps:

  (a) open centre network and sharing by clicking the Start button, clicking Control Panel, clicking Network and Internet, click Network and sharing Center.

  (b) click on the arrow next to public folder sharing, and then click one of the following options:

  i. turn on sharing so anyone with network access can open files

  II. turn on sharing so anyone with network access can open, change and create files

  III. turn off sharing (people logged on to this computer can still access this folder)

  (c) click on apply.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  You can also read this article and check if this may help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-files-with-someone

• Windows Live Mail Vista - Cannot access the list of recipients

  In Windows Live Mail Vista when I that 'To' to choose a recipient I get nothing.  My contacts are theirs, but somehow, the link is broken.  I lose a dll or another file?  Any suggestions?

  Hello

  Are you referring to Windows Mail or Windows Live Mail?

  If you encounter problems with Windows Mail, then check the link and check if that helps.

  Working with Windows Mail in Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

  If you have a problem with Windows Live Mail, I suggest you send your query in the link given for assistance.

  http://www.windowslivehelp.com/product.aspx?ProductID=15

• Acer Aspire, Windows 7, cannot access the internet or reinstall the drivers? How can I fix?

  I uninstalled the driver realtek audio, and then I lost everything. Windows doesn't detect any hardware on my device. Nothing seems to work now

   
  [Moved from comments]

  Hi Mickey,

  1. What is the brand and model of the Acer laptop?
  2. Have you tried to check if the device is detected in Device Manager?

  If you have access to the mouse and the keyboard please try the following steps:

  Method 1:

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Run the tool and troubleshooting hardware devices

  Method 2:

  Use Device Manager to find the hardware changes.

  Note:

  Use Device Manager to find the hardware changes. After your computer search the hardware changes, it can recognize the USB device connected to the USB port so that you can use the device.

  To check the hardware changes, follow these steps:

  a. Click Start, type Manager of devices in the search box of start and press ENTER.
  In Device Manager, click on your computer so that it appears highlighted.
  b. click Action and then click Scan for hardware changes.
  c. check the USB device to see if it works.
  d. restart the computer.

  Method 3:

  Download the drivers using another computer by visiting the manufacturer's website save it to a location external (USB key) and then install it in the computer in question.

  Please post back with the State of the question.

• In Windows 7, cannot access the user profile get the error "the service user profile Service has no logon.

  When you try to access the user profile, get the error message "the service user profile Service has no logon.  User profile cannot be loaded. "The new profile tried to go through the steps of profile user fix damaged by ms, but trying to create a new user profile to copy the files from the damaged user profile does not display on my C: drive the users folder (as it should).  Anyway to fix the corrupted if user profile profile are available?

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• Windows Server cannot access the folder

  Windows Server 2008 R2 SP1 Standard, I have a folder that I created.  I can access the folder if I go through the C:\ drive, but can't if I try UNC \\ServerName\ or \\IPAddress\ and receive a

  Windows cannot access \\ServerName\...
  You are not allowed to access \\ServerName\... Contact your network administrator to request access.

  but when I check the permissions on the folder, I'm registered and received a control total change, read & execute, display the contents of the folder, read, write.

  I need to be able to assign the UNC path to a database, and it is a failure because of this problem.

  Anyone have any ideas?

  QuestionBoy

  You will need to create a new post on the TechNet forums for assistance with Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• lost password for Windows vista to access the desktop computer

  A FRIEND RECEIVED A CONPUTER BUT DON'T HAVE A PASSWORD TO JOIN DESK TOP HAS TRIED TO KILL PASTWORD PROTECTION BY REMOVEING 3V BATTERY AND HELD POWER BEGINNING WITH ALL DISCONNECT

  Hello

  Responses cannot help with password lost or forgotten by Microsoft Policy.

  Keep secure passwords - Microsoft strategy on move the passwords
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  What to do if you forget your Windows password (Vista and Windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows Vista cannot click the user login icons

  On Windows vista family premium, I can get to the login screen, but nothing happens when I click on a user icon, icon access or on the close icon, except that the highlights of icon (so I know the mouse works) how can I fix this and be able to connect?

  You can log in Mode safe?
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly press F8 key until you see a black and white screen. The top/down arrow and select Safe Mode.

  If you can, connect to your admin account and do a system restore.
  Choose the date where you did not have this problem as your restore point.
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, click
  > Next > finish
  To sit and wait. The machine restarts when it's done.
  Can you now log back in Normal Mode?

  If you still can't, go back in Mode safe mode with command prompt.
  Make a check of the system files. It is to seek files corrupted and if found, is to fix them if possible.

  Start button > Search box type cmd > look up, do a RIGHT click on cmd.exe > click on Run As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
  Note: there is a space between
  'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

• Windows 7 cannot access the cliché in server 2003

  Hello world:

  I using windows 7 pro,
  my company has a server and version is windows server 2003,
  function of shadow copy are already active on the server.
  However, when I map the network drive to share the Server 2003 folder in my pc.
  I want to check the previous version on the network drive on my pc,
  but it does not show NO previous version available.
  When I using my PC to refuel, windows xp version checks the card reader.
  Well Yes, the previous version is show all.
  I was wondering why windows 7 cannot see any previous version?
  kindly help me, thank you very much!

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Windows Vista - cannot use the TRENDNet TBW-102UB Bluetooth device

  Hello

  I am facing a problem that occurs when try to connect the device Bluetooth on Satellite A135-S4637 with Windows Vista Home Premium.

  The Bluetooth device is a TrendNet TBW-102UB and in XP it works fine.
  The error message is "peripheral Bluetooth is not ready."
  After new installation updated from the manufacturer's Web site the problem persists.
  Is there a service pack for Vista which fix this kind of problem or it is something relational to the Toshiba Bluetooth software?

  Thank you
  Daniel

  Hello

  Please don't be crazy on me, but I do not understand the relationships for Toshiba laptop. Are you sure that all the USB ports on your laptop running at 100%?

  If Yes, all this has something to do with this external device, driver and settings. To be honest, the manufacturer must provide Vista compatible software. Do you think so?

• Windows Vista cannot find the CD/DVD drive

  The problem: my computer does not find my CD/DVD drive, it is not listed in Device Manager as at all CD/DVD drive, it has power because it opens when I press the button, and when I put a CD, it does nothing.

  My computer: I have Windows Vista Home Premium, dv6700 Notebook, 32 bit, running on the System Pack 1. (I tried to update to the pack 2 system, but at some point, he is simply decided to AC turns off and when I booted up my laptop, he did a system restore and poof, System Pack 2 was gone, and I never re-installed.)
  What I tried: I tried the Fix It program here on Windows, and it has detected a problem (if I remember correctly, but had no trouble for him); I tried deleting the upper and lower filters (which I haven't really found, because the CD/DVD is NOT an option in my device manager); I tried setting my computer back to factory settings completely.
  Basically, I'm at a loss to know what to do to try to solve this problem. I don't remember how long this has happened (at the time, that my hard drive does not open even for me to put a CD) and I don't see what program could have caused it as appropriate. The only rider listed is listed under disk drives, and it's WDC WD2500BEVS - 60UST0 ATA Device (I don't know if cela help/questions in all). I do not have a disk; the laptop comes with Windows Vista and if she had a drive anyway, I didn't like this laptop was given to me by my father. I don't know what else to do to try to solve this problem. Someone please help.

  Try to pull the reader iut and reinstall it.

  How to remove a computer laptop dvd drive/ram
  http://www.YouTube.com/watch?v=OfeKj2kywRU

• Problems of Windows Vista to access the shared drirectories.

  Windows Vista. I'm looking to share directories on my PC with my laptop on my home network. I put it as specified.  When I go to my PC and you click on a player, it just freezes.

  Hello

  1. do you remember make changes to your computer before this problem?

  2. you receive an error message?

  Start your computer in a clean boot, and then check: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

  Check also for error in the Event Viewer logs: Open event viewer http://windows.microsoft.com/en-US/windows-vista/Open-Event-Viewer