OpenScript: How to extract the StepName and StepResult to an external file

Similar Questions

• I downloaded a free trial of Adobe Creative cloud and dreamweaver CC. I am not able to download a .psd to see how to extract the HTML and CSS.

  I downloaded a free trial of Adobe Creative cloud and dreamweaver CC. I am not able to download a .psd to see how to extract the HTML and CSS.

  Download button is disabled. What is the case for a free trial?

  Hey girijamg,

  I asked that you try to open a page because snippet Panel will be disabled until there is a html page is open in DW.

  Excerpt from Panel will be ready for the job that after any html page is open in DW.

  Hope it makes sense.

  Lalita

• How to install the .lst and .afm on Windows font files?

  Sorry if this has been answered before but I couldn't find it.

  My University tutor gave me a few fonts in the form of .lst and .afm files I assume these are the file types that you get when you compress InDesign documents.

  I wonder if there is anyway to integrate into Windows because changing the file .ttf or .otf format doesn't seem to help.

  Thanks in advance.

  You don't need this .lst file. But you need the .pfb and .pfm files to go with the .afm file (pfb and pfm files have the same name as the .afm file). Place them in the same folder, then right-click on the .pfm file, then choose install. (In fact, you need not file .afm under Windows.)

  Peter

• How to extract the number and other particulars

  I am trying to write a simple Select query that returns a list of
  Used EMPLOYEE_TABLE and in the second column names a count of the
  number of entries for each employee in the EMPLOYEE_ATTENDANCE table.
  
  Can anyone suggest how I might do this?
  
  For example:
  I have two tables EMPLOYEE_TABLE and EMPLOYEE_ATTENDENCE.
  
  EMPLOYEE_TABLE:
  
  emp_number emp_name
  1A
  2B
  3 C
  4 D
  
  EMPLOYEE_ATTENDENCE:
  
  emp_number emp_time
  1 8.00
  1 8.00
  1 8.00
  4 8.00
  4 9.00
  4
  4
  4
  3
  3
  3
  2
  
  
  
  
  Now my requirement is I want to retrieve the list of employees with emp_name and the number of days
  the employee came (ie the number of entries in the EMPLOYEE_ATTENDENCE table).
  Some, such as:
  
  A 3
  B 1
  A q
  D 5

  Select
  a.emp_name, b.emp_attendence
  Of
  Employee_Name has,
  (select emp_number, count (emp_number) "emp_attendence" of the employee_attendence by employee_number group) b
  where a.emp_number = b.emp_number;

  Kind regards
  Navneet

• I'm trying to extract the strings and load them into a text-helpplease file

  I'm trying to extract the strings and load them into a file text without space between them - see below
  
  p_csa = ISCC M4 DP
  
  where p_csa is a tring to load into a text file
  
  
  
  Code:
  
  SELECT SUBSTR (p_csa, 0, 0) INTO v_telco FROM DUAL;
  SELECT SUBSTR (p_csa, 1, 4) INTO v_comp FROM DUAL;
  SELECT SUBSTR (p_csa, 5.3) INTO v_csa_prefix FROM DUAL;
  SELECT SUBSTR (p_csa, 8, 4) INTO v_csa_type FROM DUAL;
  
  fileidinvoice: = UTL_FILE. FOPEN (c_data_location, filenameinvoice, 'W');
  fileidlog: = UTL_FILE. FOPEN (c_data_location, filenamelog, 'W');
  
  UTL_FILE. PUT_LINE)
  fileidinvoice, v_telco | » '|| v_comp | "|" | v_csa_prefix: "| v_csa_type);
  
  
  -the content of the file-
  
  ISCC M4 DP
  
  =====================
  I want to remove the space between the chain above for the content of the file should look like this:
  
  -the content of the file-
  
  GCSIM4DP

  Hello

  976253 wrote:
  I'm trying to extract the strings and load them into a file text without space between them - see below

  p_csa = ISCC M4 DP

  where p_csa is a tring to load into a text file

  Code:

  SELECT SUBSTR (p_csa, 0, 0) INTO v_telco FROM DUAL;

  Is it always NULL?

  SELECT SUBSTR (p_csa, 1, 4) INTO v_comp FROM DUAL;

  You don't need the double table much in PL/SQL. You can simply say

  v_comp := SUBSTR (p_csa, 1, 4);
  

  Almost all integrated single-row functions work in PL/SQL. (NVL2 is the only one I know who does not work in PL/SQL).

  SELECT SUBSTR (p_csa, 5.3) INTO v_csa_prefix FROM DUAL;
  SELECT SUBSTR (p_csa, 8, 4) INTO v_csa_type FROM DUAL;

  fileidinvoice: = UTL_FILE. FOPEN (c_data_location, filenameinvoice, 'W');
  fileidlog: = UTL_FILE. FOPEN (c_data_location, filenamelog, 'W');

  UTL_FILE. PUT_LINE)
  fileidinvoice, v_telco | » '|| v_comp | "|" | v_csa_prefix: "| v_csa_type);

  What are you trying to do here? For example, what you're trying to put between c_comp and v_csa_prefix?

  -the content of the file-

  ISCC M4 DP

  =====================
  I want to remove the space between the chain above for the content of the file should look like this:

  -the content of the file-

  GCSIM4DP

  If you don't want space, then only concatenate all the spaces in the string before you write it and REPLACE allows you to delete all the spaces that have been copied from p_csa. For example:

  UTL_FILE.PUT_LINE ( fileidinvoice
              , REPLACE ( v_telco || v_comp
                                      || v_csa_prefix
                            || v_csa_type
                     , ' '
                     )
              );
  

  I guess you need the v_comp of separate variables, the v_csa_prefix and the v_csa_type for something.

  I hope that answers your question.
  If this isn't the case, after a complete script that people can run to recreate the problem and test their ideas. Display the results you want (in other words, the contents of the file created).
  Always say what version of Oracle you are using (for example, 11.2.0.3.0).
  See the FAQ forum {message identifier: = 9360002}

• How to extract the values of XMLTYPE column,

  SQL > create table temporary global xmtype_tab (xmlfile xmltype);
  
  SQL > select * from all_directories;
  
  SYS RESTOREDIR/home / / dbimptask /.
  
  insert into xmtype_tab values (xmltype (dbms_xslprocessor.read2clob ('RESTOREDIR ','LAS_SETUP.xml ')));
  
  1 line of creation.
  
  SQL > select * from xmtype_tab;
  
  XMLFILE
  --------------------------------------------------------------------------------
  <? XML version = "1.0"? >
  rowset <>
  < ROW >
  < DATA_CAPTURE_ON > 1 < / DATA_CAPTURE_ON >
  
  
  How to extract the values inside each tag?
  
  
  XML file has the following data...
  
  
  rowset <>
  < ROW >
  < DATA_CAPTURE_ON > 1 < / DATA_CAPTURE_ON >
  < > 9600 BAUD_RATE < / BAUD_RATE >
  < ACK_TIMEOUT > 1 < / ACK_TIMEOUT >
  < TUBE_TRAVEL_LIMIT > 4 < / TUBE_TRAVEL_LIMIT >
  < SEND_SID_TIMEOUT > 1 < / SEND_SID_TIMEOUT >
  < INDEX_Q_TIMEOUT > 2 < / INDEX_Q_TIMEOUT >
  < HW_HANDSHAKING > 1 < / HW_HANDSHAKING >
  < / ROW >
  < / LINES > ';
  
  I use the Oracle 10.2.0.3 version...

  Why does this work?

  You are missing the tag of the ROWSET:

  select extractvalue (xmlfile, '/ROWSET/ROW/BAUD_RATE') baud_rate
    from xmltype_tab
   where existsnode (xmlfile, '/ROWSET/ROW/BAUD_RATE') = 1;
  

• How to extract 1 ASA and put them in the new table

  Hello

  Can someone tell me how to extract a table and put in the new table. (eg. I have a table with no 1 to 1000, I would extract only 1, 30, 60, 90,...)  ?

  Please advise me.

  Thank you

  concerning

  
  

• How to extract of gain and offset by AnalogWaveform?

  Hello

  On a similar note to the posts at https://forums.ni.com/t5/High-Speed-Digitizers/How-are-offset-and-gain-in-the-niScope-fetch-function... and http://forums.ni.com/t5/High-Speed-Digitizers/Where-to-find-gain-and-offset-of-USB-5132-running-in-C... , I try to extract the file to output data from the gain and offset of our USB-5132 digitizer.  The file contains the event argument e.Result 'Fetch' and is sent to file in c# as follows:

  binaryFormatter.Serialize (fileStream, e.Result);.

  I want to read in the data file and to determine what the gain and offset of the digitizer.  I don't think I can use "Fetch" to read the file (is this correct)?  I'm reading as this waveform data:

  AnalogWaveformrecords [] = binaryFormatter.Deserialize (fileStream) as AnalogWaveform[];

  I think there should be a way to get the gain and offset because this routine can apparently do:

  Private AnalogWaveformScaleRecords (AnalogWaveformrecords []) [];

  Also, I tried to get the ScopeWaveformInfo like this:

  Info [] ScopeWaveformInfo = binaryFormatter.Deserialize (fileStream) as ScopeWaveformInfo [];

  but I got a null result in the structure.  This could have the right approach however?

  Is there a way to get the gain and offset of the digitizer without using Fetch?  If not, is it possible to use Fetch reading data from a file, and then extract the gain and offset the usual way (from Fetch)?

  Thanks for any thoughts on this.

  Kind regards

  Penny

  I found a solution for this - get the gain and offset with extraction by using a different set of data.  Calibration seems stable enough to do this.

  Thank you

  Penny

• How to extract the signal from the waveform of my power level designated?

  Hi all

  How can I extract the signal of the waveform accroding to the power level? I read the Trigger & Gate .vi, but this vi retrieves the signal duration. I want to extract the signal depending on the power level.

  As shown in the following figures, the signal I want to deal with is between 130000 to 140000, if I Zoom, I can see the useful signal is between 135400 to 138200. The question is how to extract the signal in the area?

  I tried the sub_NoiseEst_And_Chop_Shell.vi in the example of Packet_based_link also, but this Subvi seems to be a bit slow. Can someone give me the best advice? Thanks in advance!

  

  

  I'm working on something similar, but have not had time to fully develop.

  My idea was to use an envelope detector (low pass filter) and then use a detection of energy VI on the envelope.

  Here is where I left

  

• Need urgent help! In my Vision Application, how to extract the parameters of the geometric model specified curve was generated by the template editor OR?

  I have an application of machine vision, in which the geometric pattern match technique was used to find the target in the images of type variant.

  as we know, we do a geometric model by model OR editor in the editor we can adjust the parameters of the curve specified settings to get the desired curves and we derive the custom box to ignore during the match. then we save the use of the same model in our application of vision.

  Now my question is coming. When I program my request for the geometric game. I have specified the parameters of the curve for the entrance of the IMAQ Advanced Setup learn ringtone 2, of course, I have to adjust this identical to the model, but I don't know how we extract the geometric model. I tried all the methods, for example, I can read data custom, IMAQ get characteristics of the geometric model(it's just for the basic functionality? so is there even a VI based edge?), even at anasys PNG file formats! But I can't read the info of the geometric model by myself!

  It is also illogical to adjust the CURVE SETTINGS manually again for the " IMAQ Advanced Setup Learn Pattern 2" after that I already have in the template editor OR!

  Hello

  Why do you need to specify the curve settings once again, if you have already built a model using the template editor? You don't need to use "IMAQ Advanced Setup learn geometric model 2 VI" to find games (see the attached example).

  You can wire the 'curve settings' control to 'IMAQ configuration geometrical game model 2 VI', but the values are not used if wire you a Boolean true to the node "use learning curve settings" (it's like that by default). To prove it, I enclose a small program with pre-created model (using the template editor) for a geometrical alignment. The model and the test of three images are also included.

  Try changing the settings of the curve with the 'use know curve settings' enabled, and you will see the corresponding score remains the same. Disable the Boolean control, then try to change the curve settings.

  Also take a look at the detailed help for "IMAQ configuration geometrical game model 2 VI", specifically the "learning curve parameters of use."

  I hope this helps.

  Best regards

  K

• How to use the capture and the print button

  I tried to figure out how to use the capture and the "print" button, or add or what you call. I press it and the whole page of a different color changes, so I try to cut the section I want but I don't know how to send it to the printer. Can someone help me with this. I'm not at savvy with tech stuff, but when I find a recipe or something and it doesn't have an option to print a certain area, I can't understand how to use it?

  Thank you

  Andi Starbuck

  That happens to me is, I click and drag to make a rectangle of yellow selection, and as soon as I raise my finger on the mouse button, the part I've selected is captured as an image, a new tab opens and preview before printing, the image display. I can use the installation of the Page or simply print. But if I close the preview, this temporary image vanishes and I'm back on the page where I started. You see something different?

• How do you the bookmarks and history buttrons open boxes in Firefox 33?

  How I make the bookmarks and history buttons open their respective boxes instead of having to use the submenu stupid button on the sidebar?

  Apparently, the Restorer of classic theme worked for Firefox 29, but it does not work for 33:
  https://support.Mozilla.org/en-us/questions/991080

  There are two sets of buttons of toolbar tools for history and bookmarks in the palette to customize with the CTR extension installed. You need those without drop marker to open the sidebar.

• How I change the fonts and colors of default return?

  I changed the font and the color of the text through the Tools button and the button options and the tab content. I can't find anything tell me how to change the fonts and colors to the colors and fonts by default. Can you advise me? I use Windows 7 Home Premium OS. Thank you.

  Hi Brenda19605,

  You can use this article to set the fonts and colors: https://support.mozilla.org/en-US/kb/change-fonts-and-colors-websites-use?esab=a & s = do & r = 0 & s = as

  The default settings for the police are in this article:
  https://support.Mozilla.org/en-us/KB/some%20text%20shows%20up%20bold%20after%20upgrade

  Unfortunately for the default color has no good reference. For the text, but it is black (most lower-left), the background is white (color above left). Unvisited links is blue (column 8, line 5) and the visited link is purple (column 9, line 5).

  Let me know if you need help more!

  Lordfreak

• How to adjust the brightness and contrast for Compaq Presario all-in-One CQ1-1007 D desktop PC

  How to adjust the brightness and contrast for Compaq Presario all-in-One CQ1 - 1007 D desktop PC? THX.

  There were buttons No. brightness and contrast on the front of the monitor-no onscreen menu.

  On your desktop,.
  Right-click to select graphic properties->

  in display settings, click Advanced settings
  Here you go, you can do almost anything with the brightness

  Hope it helps

• Satellite A80: How to restore the audio and video codecs?

  How to restore the audio and video codecs that are installed by default on my Satellite A80 with XP Home edition?
  I removed the safe mode, due to a problem with the Pinnacle Codec installed by Pinnacle Studio 10.
  Now, I need to put the video standard in audio codecs.
  I already downloaded the Microsoft Mediaplayer codec package and video sound new fr in Media Player.
  Unfortunately I have always its program to diagnose Toshiba during the test of its Midi and Wave.
  System Restore came with the message that the restoration was not possible because no changes had been made.

  Post edited by: roel

  Hello

  Try to use the tool "system restore."
  This application restores the operating system to the beginning.
  Maybe it will work.