Operation of the device file Raw often hang and cannot change

Similar Questions

• "The backup file contains unrecognized data and cannot be used.

  Original title: - what are MS provides a BKF recovery tool? "The backup file contains unrecognized data and cannot be used.

  I'm trying to restore BKF files created by NTBackup.exe after the crash of a hard drive running XP Pro. The new hard drive is the same brand (WD) goes into the same computer Dell Inspiron and the same OS. No catalog file is available and trying to recreate the NTBackup recovery gives an error message.  No catalog cannot be created for many, but not all of my backup BKF files.

  I do not consider the solution of SysTools $89 for a large part of the answer. This problem is not uncommon and I hope MS has or can tell me a free tool to allow me to restore from any of my BKF.

  Thank you.

  You can take a look here: http://www.fpns.net/willy/msbackup.htm#NTBKUP

  I have no information other than what is on the web page.

• Is only available for the xmp files RAW files?

  When we develop a RAW with Camera Raw image, we always get a file with all the settings xmp,

  But after that I developed a JPG image, I saw that the Raw settings of the camera icon appeared above the upper right of the thumbnail of the image in Bridge.

  However, I couldn't find the xmp file.

  Is only available for the xmp files RAW files? Jpg or TIF don't have for their Camera Raw settings xmp files?

  For JPG and TIF files - adjustments are classified, by design, in the metadata of the file rather than in a file "Sidecar".

• The access permissions to the NTFS file in "C:\windows" and "C:\Program files" are not secure

  Hey there
  Had a minor shock after I discovered that the access permissions default to the "limited users" in "C:\Windows\" and "C:\Program files\" are raised by the image automatically XP - Pro installed on my Tecra A6.

  Default access permissions to the NTFS file in "C:\windows" and "C:\Program files" for "A limited number of users" should not have permissions "File/writing data Creation" or "Creation of folders/adding data. This opens up for what is called dll redirection attacks (ref: http://blogs.msdn.com/aaron_margosis/)

  When you install a Win XP a normal retail or OEM Windows XP cd these two folders are special protected by this measure (not allowing the permissions listed for limited users). Installation procedure of your image work it around (in established Microsoft) measure and open breaches in security.

  Now I have to drop all these permissions and hope that all of the utilities of your work for limited users after that that, otherwise you get a very unhappy customer on your hands. ;)

  Siggimund

  Hi Henrik

  Thanks for the information. I have a common user of Toshiba and I have never heard of such attacks to redirect m .dll.
  However, I think that if each user install antivirus software (nothing unusual at the time; everyone should use) and activate the Microsoft Windows updates and OS firewall should be safe.

  Greetings :D

  PS: I read in this forum that sometimes some Toshiba applications as energy saving does not work under limited account.

• Windows movie maker error - the file is not indexed and cannot be imported

  I have converted a quicktime in WMW clip, but when I try and import the video in windows movie maker, that it comes up with error the file is not indexed and cannot be imported? What does that mean?

  Try another converter.

  There are to many converters available on the net...
  the following links are some examples.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (6) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

• The /drm-web-client/Logon.aspx file was not precompiled and cannot be requested.

  Hi all

  We currently use DRM Version 11.1.2.2.302 patch.

  We are facing the error when we open the web console below.

  The /drm-web-client/Logon.aspx file was not precompiled and cannot be requested.

  It used to work very well and we see that this web configuration file has been updated. I assume that there is a problem with Internet Information services.

  Any help would be greatly appreciated.

  Thank you

  VINET

  Hi all

  The Web configuration file has been modified by windows service and after restarting the server, new web configuration file has been created and we have web access console.

  VINET

• Error message: "the site has encountered a problem and cannot display the page you are trying to view", while running Windows updates.

  Original title: Windows updates works do not, cannot get windows updates

  I had to reinstall Windows XP service pack 2. I went to the updates and got this message. The website has encountered a problem and can not display the page that you are trying to view  I tried several times and got the same results.

  The problem is that you need to install Service Pack 3 before being able to get all post-SP3 updates. :-)

  Here's what you need to do:
  Preliminary work:

  Download the installation files of SP3, IE8 and Microsoft Security Essentials, which is an effective antivirus/antimalware program. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links to all the installation of three files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials (for MMS)

  1. physically disconnect from the Internet. Also unplug all unnecessary devices!

  2. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  Select "Turn off automatic updates" and click OK.

  3. install the SP3. Restart TWICE.

  4. switch to IE8. Restart TWICE. (Note: it is important to let IE at the level before the upgrade to SP3 IE6.) After you are in SP3, then you can switch IE6 to IE8).

  5 install MSE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  6. make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  (Now you can physically reconnect to the Internet. Update Antivirus program.)

  7. visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  8. reactivate the automatic updates.

• Windows XP update error: 0x8024D001, the site has encountered a problem and cannot display the page you are trying to view.

  Original title: Windows XP ~ Windows Update problem.
   
  During three days of solid, and I slept then work, sleep and then working to solve a problem I have with the functionality of Windows XP Windows Update - this is the error message I get constantly

  [Error number: 0x8024D001]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  I installed a new copy of Windows XP on a hard disk nine, installed Service Pack 1, Service Pack 2 and Service Pack 3, installed Internet Explorer 8 installed .NET Framework 2.0 as Microsoft requested, modified popup settings to allow Windows Update page to be free to scan my system for updates, etc... and I even enabled all Active X permissions BUT I still can't Windows Update to allow me to download all updates, patches, etc... Windows Update has generally

  I also turned on automatic updates requirement also BUT no dice - I can't just not update Windows to activate and start as normal, no matter how many times I format the drive and do a fresh install.

  I had to get a new drive hard as my old crashed.

  Now, I have to install Windows XP again but I noticed how old, easy to update somehow has been paralyzed.

  It's as IF Microsoft is crippling of Windows Update to start simple as pie, then now we users HAVE to jump through hoops to get our operating system Windows XP set to day and repeatedly queries Microsoft asks us or install 'FIX IT' service does not work and it is impossible to reach by phone about Microsoft , and the live online help runs into errors when it is installed, so I have to hit the Internet Forum here for advice.

  How, in words simple Windows XP allow Windows Update to run the scan, to download and install the process what it is supposed to do?

  What exactly is missing to allow the screen to show the green bar and scan the notificiation there have updates available?

  What I am doing wrong?

  I really hate to say this, BUT I'm literally at the edge of tears.

  Help!

  Is there a maintenance program master as an "all-in-One rollup patch" that will search the lack of programs, applications, and settings of Windows XP and makes a one-way relay to set everything right and ensure that the programs needed to make Windows Update work are knitted in Windows XP, including all programs missing subprogrammes and to settings then check their self errors or incorrect version but it provides goes off to FIND the RIGHT version of What is needed?

  Or better yet a disc Compilation of master i.e. Final Service Pack 4.0 that contains all fixes known on DVD that would be found in the downloaded Windows Update but rather is purchased for $10.00 that contains each hotfix and update known for Windows XP so that we can manually update Windows XP on the side of the user of the Internet without having to go on the internet?

  You need 3 things to WU work.

  WindowsXP-KB892130-ENU - x 86 .exe

  KB892130

  Windows Genuine Advantage Validation v1.9.42.0

  WindowsXP-KB898461x86 - ENU.exe

  KB898461

  Installs a permanent copy of the Package for Windows Installer

  And and unofficial WUA.

  He's right on obsolete dll of WUA that MS is not updated once sometimes for some unknown reason... even the WU Fix there don't solve it. I ran a few tests in the fall and virtual machine on the same issue yesterday. You must install the unofficial Windows UPDATE agent.
  Windows Update Agent below... MS last isn't the last. Boo Ms.
  Download WindowsUpdateAgent7.6.7600.256 - 257.zip to your desktop (MS does not have the latest version of Windows Update Agent. Only 7.4.7600.243 so make us with this).

  Unzip it, go to the folder and double-click RunMe - MakeInstallWindowsUpdateAgent.bat.

  It will download, MS, the files needed to create the Windows Update Agent 7.6.7600.256/257 and then install it. The files that it contains are 100% Microsoft. He uses just a few third-party tools to make it.

  You will be left with the installer, WindowsUpdateAgent7.6.7600.256 - 257.exe. Keep or delete. Your choice.

  Analysis antivirus for WindowsUpdateAgent7.6.7600.256 - 257.zip

  Information for network administrators about how to obtain the latest Windows Update Agent

  Taken from the newsletter above...
  View
  There is no stand-alone installer for the latest version of the Windows Update Agent (7.6.7600.256)

  EDIT: I forgot to mention. It took 1 hour before the scan finished for me. A guy that I was helping on another forum just let WU scan of the day to the next. When he awoke, the scan had the results. So please be patient.

  "Or better yet a disc Compilation of master i.e. Final Service Pack 4.0 that contains all fixes known on DVD that would be in the downloaded Windows Update, but instead is purchased for $10.00 that contains each hotfix and update known for Windows XP so that we can manually update Windows XP on the side of the user of the Internet without having to go on the internet?

  You can create a CD to date and does not deal with all the hassles during the fresh installation. You need nLite and my script of the UDC. You will only need SP3 when "slipstreaming". No SP1 or SP2.
  

• change my phone number and cannot change the keychain

  Dear,

  gently, I changed my phone number and cannot change the keychain

  You try to make the change in the preferences/iCloud/Keychain/Options of the system? What happens when you try?

  City link below.

  • The device that uses the SMS compatible phone number you provided when you set up first iCloud keychain. A verification code is sent by SMS to the phone number. If you can not access this number, Contact the Support of Apple, which can verify your identity so that you can run the installer on your new device.

  Frequently asked questions about iCloud Keychain - Apple Support

• Windows Update does not work after you reinstall Windows XP SP3, get error: "the site has encountered a problem and cannot display the page you are trying to view.

  Original title: cannot run Windows Update

  I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For self-help options:

  • Frequently asked Questions
  • Find Solutions
  • Windows Update Newsgroup

  To support options:

  • Microsoft online assisted support (no cost for Windows Update issues)

  Can someone help me please?  Thank you.

  I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For self-help options:

  • Frequently asked Questions
  • Find Solutions
  • Windows Update Newsgroup

  To support options:

  • Microsoft online assisted support (no cost for Windows Update issues)

  Can someone help me please?  Thank you.

  [1] select start > run > wuaucpl.cpl > disable automatic updates > apply (if the setting is changed) > OK

  To disable the horse notification that appears in the status bar on automatic updates is turned off.

  Go to start > Control Panel > Security Center > resources > change the way Security Center alerts me > uncheck automatic updates

  [2] manually download the full install for IE8 exe and install IE8 and refuses to download updates at the time of the installation of IE8

  http://www.Microsoft.com/en-us/download/Internet-Explorer-8-details.aspx

  [3] manually download and install the latest cumulative security for IE8 update and restart the computer before

  visit windows update via the shortened link in your Start menu.

  When you have Win XP SP3 and IE8, it will be the necessary file recommend you download and save the file in the folder, and then double-click on and run the executable file from there.

  http://download.Microsoft.com/download/1/9/A/19A6AC47-9EA0-455F-B918-A44D25B5304C/IE8-WindowsXP-KB2898785-x86-enu.exe

  Restart after installing IE8 cumulative security update.  It should restart when installation is complete.

  [4] now to connect to windows update manually through your browser using the shortcut in the start menu link.  Ignore the warnings, recommendations to turn on automatic updates.

  Report back please on the status and please report problems with error codes. Thank you.

  Recommend you not install MSE but rather install a free antivirus like Avast or AVG.

  Recommend also you do not install Windows Search 4.0 these programs not to live pleasantly on most XP machines and cause CPU excessive loading unpredictable and inconveniently sometimes interfering with the usual ability to XP if not to multitask without problems.  Also recommend you only install Firefox is a browser much better than IE8 that will not work even at many Web sites.

• Error manually running Windows updates "the website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem.

  Original title - manual update of Windows XP via "Windows Update" fails

  07/01/14: click on "Windows Update" on the desktop (XP Home) and XP Tablet

  Result: 'the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. »

  This office has begun on about 3 days ago and just this morning appeared on the Tablet

  I do McAfee and Microsoft updates manually every morning after the startup of computers so that they will not automatically be updated when I'm busy with other things

  I suspect that the McAfee via Verizon security package is the culprit since the 'look' of their package and procedures changed end of December

  Since then, they have had updates almost every day

  And around the same time, my problem appeared on XP Home Edition, I was not able to access Adobe PDF files and had to re-download Adobe Reader XI

  Any body else having the same problem?

  And help get the update of Windows XP to run again?

  It would not be the first step to disable automatic updates in Control Panel and manually download and install the most recent cumulative security update for internet explorer since without first, everything in the way of troubleshooting will be futile?

  Download and install the latest cumulative security for IE8 update and manually restart the computer.

  visit windows update via the shortened link in your Start menu.

  Assuming that you have Win XP SP3 and IE8, it will be the necessary file

  http://download.Microsoft.com/download/1/9/A/19A6AC47-9EA0-455F-B918-A44D25B5304C/IE8-WindowsXP-KB2898785-x86-enu.exe

• Cannot upgrade to SP3 after a fresh install of XP. Gets the error while accessing the Windows Update page: "the site has encountered a problem and cannot display the page you are trying view."

  Original title: install SP3

  I did a clean install of xp with sp2, hear automatic updates.  After 3 days sp3 has not downloaded, computer at the time of the update. Cannot load an update site download also constantly message "the website has encountered a problem and cannot display the page you are trying to view.  I tried options suggest they also get the same message or fail to load.

  I did a clean install of xp with sp2, hear automatic updates.  After 3 days sp3 has not downloaded, computer at the time of the update. Cannot load an update site download also constantly message "the website has encountered a problem and cannot display the page you are trying to view.  I tried options suggest they also get the same message or fail to load.

  Just install Windows XP SP3 manually...

  Before do you - make sure you have restored all the way back to Internet Explorer 6 * and * all your drivers for hardware devices are the latest version of each of the web pages by the hardware manufacturer (Microsoft did not your hardware - to be of course checked manually for the most recent driver by visiting the Web pages or the manufacturers yourself and find the latest driver for any model device (s) you have - map) motherboard chipset video, audio, network, etc.)

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

• I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  Sasha,

  What browser (exact version). ?

  Harold Horne MVP on September 24, 2012

  0x8024400a

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. on start and then click Run.

  2 copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281>

  You may be unable to access the Windows Update of Windows XP Web site.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389>

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28>

  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364>

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717>

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center.

  This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely.

  The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  FIRST: Uninstall IE8 and IE7 if they are installed. Back to all the way back to IE6. You want other patches before you get those. Reboot after doing this.

  You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

      
  

  UTC/GMT is 14:12 on Sunday, October 28, 2012

• Update Windows "the website has encountered a problem and cannot display the page you are trying to display."

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For self-help

  For self-help options:

  • Frequently asked Questions
  • Find Solutions
  • Windows Update Newsgroup

  To support options:

  • Microsoft online assisted support (no cost for Windows Update issues)

  They gave me before several links to follow:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  These links could not download exe making known. is not a valid win32 application. Everything I tried to download gives me the same MSG (not a valid win 32 application). Can someone please!

  Hello

  Were there any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Follow the steps in the link.

  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  http://support.Microsoft.com/kb/2497281

  Method 2:

  Get the error: not a valid Win 32-bit application can have several origins:

  I have listed some of them below.

  (a) the file is corrupt, missing, or bad.

  (b) file is not designed for your version of Windows:

  (c) file is a virus, worm or other malicious program file.

  I suggest you to use Internet Explorer with no. Add and verify.

  a. click the Start button.

  b. click on all programs.

  c. click on Accessories.

  d. click System Tools and then click on Internet Explorer (No Add-ons).

• Windows Update, not loading, getting the error "the website has encountered a problem and cannot display the page you are trying to display."

  I just did a fresh install of win xp and impossible to get the update of windows to work. I get this message: the site has encountered a problem and cannot display the page you are trying to view.

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003