Operations with lists

Similar Questions

• Using repeat with... in... Loops with lists of properties

  I am using a loop "repeat the operation with the variable in the list" with a list of properties where properties are symbols, but it doesn't seem to work; It falls right through the loop. Exactly the same code works when passed a list of properties where properties are integers.
  
  Of after the description of function AW7 repeat with in:
  

  Quote:
  Repeat with X in the list repeats the instructions in the loop with each of the elements in a list. Each time through the loop, the function sets the next item in the list or the following in a property value to the specified variable. As Authorware estimated the list with each pass through the loop, the instructions that modify the list inside the body of the repetition can affect the loop. Authorware maintains a reference to the list of origin for the duration of the loop. This means that the list persists at least for the duration of the loop.
  Syntax:
  Repeat the operation with the variable in the list
  (s)
  end repeat

• Process * \MCSHIELD. EXE the nest (428) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  XP SP3 system

  I get warnings like this when Mcafee updates.

  Process * \MCSHIELD. EXE the nest (428) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  Process * \SVCHOST. EXE the nest (1632) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  Is this a problem Microsoft or Mcafee?

  Do I need to fix?

  In the McAfee forums, there are several similar positions such as:

  https://community.McAfee.com/message/241542

  I'll sue your question on in their community, as they already seem to know about it.

  I would also say that, unless you are very fond of McAfee or you are forced to use it, you plan to replace it with something that has a smaller footprint, uses less resources and doesn't have these problems - something like Microsoft Security Essentials, you can get here:

  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

  MSE completed with the free version of MBAM and SAS should permanently keep your clean enough unless you're a daredevil like me:

  Download, install, update and do a quick scan with these free malware detection programs (not at the same time) and remove all threats:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  SAS will probably report a lot of tracking cookies and you can just let him delete them.

  Even if you keep McAfee, I always supplement it with MBAM and SAS since no single AV program does seem to know everything.  If your McAfee of your system is clean, I would interpret that means - McAfee found nothing, says he knows.  It is prudent to use more than a reputable scanner to get more coverage.

  If you choose to spend (and you can't have both at the same time), you must be sure to use the uninstaller that you can get from here:

  http://service.McAfee.com/FAQDocument.aspx?LC=1033&ID=TS101331

  Your system will give you better performance.

• As an operator with the long data type

  Oracle 10g.

  Hi gurus

  I want to apply as an operator on the long data type, but I get the error message, can you please help me why is that I use as an operator with the long data type. I did some research and but unable to find a solution, see query for more details below...

  Query

  SELECT trigger_body FROM user_triggers

  WHERE trigger_body LIKE '% UPDA % CASE % ';

  Error

  ORA-00932: inconsistent data types: expected NUMBER got LONG

  00932 00000 - ' incompatible data types: wait %s %s got. "

  * Cause:

  * Action:

  Error on line: column 2: 7

  Concerning

  Muzz

  Adrian Billington wrote to the top of your options.

  working with long columns

• Basic operations with vCO

  Hi all

  Our team of db generates a txt file and I have this zip file and send a few ftp site... This recurring transaction and I repeat every day.

  I need a workflow to move the file, copy the file, zip file, and send to the ftp site...
  Is possible this operation with vco...

  Thank you

  I see quite a few ways that you can do with vCO.  In my environment, we use vCO installed on windows hosts.  Windows hosts where is installed the vCO slightly contain other software we have created wrappers around workflow.  Among the software we have created wrappers of vco for various windows of the cli-based the eggs/ovf VMwares management tools, commands Windows AD, etc..  You can very easily run local commands that could be batch, or powershell scripts that you created.  We wrap also tricks of powershell.  If you have the device or a linux-based install of course you will need to shell script or whatever you prefer in this environment.

  There is also the ssh plugin we use pretty heavily in our environment for various tasks.  I have a general purpose host script to make calls to various utils, we have developed in-house and based on linux cli for a few different packaging products.

  There is also another great utility which is posted here as a bunch of comments script manager to run scripts on a virtual machine.  We use this a little utility for new deployments and other configuration after commissioning management tasks.

  You will also find this vCO has capabilities of management very simple file so if you just need to move files or open one up a process you can do if the text or xml.

  I hope this helps. Don't forget there are also REST and SOAP plugin to take advantage of all the products that have one of these APIs.

  Paul

• In our Web page we have pages with lists of the pdf reports that we want to make available. I tried a search engine, but it only directs you to the page with the list. How can we lead the researcher to a specific report?

  In our Web page we have pages with lists of the pdf reports that we want to make available. I tried a search engine, but it only directs you to the page with the list. How can we lead the researcher to a specific report?

  Exactly, it would depend on how you have set the referencing of your site, please check the suggestions made in this tutorial:

  https://helpx.Adobe.com/Muse/how-to/sitemap-XML-file-explained.html

  In addition, you can check these:

  http://musewidgets.com/collections/all/SEO

  Thank you

  Sanjit

• By using the IN operator with a slider?

  Hi guys, how can I go on the use of the IN operator with a slider?
  
  For example, I have a slider that is a range to match dates. I want to use these results to compare via an IN operator in a WHERE clause.
  
  Thanks :)

  You can do this way
  Use EXECUTE IMMEDIATE with into clause.

  InClause := '( your in values ) ';
  
  execute immediate 'select xyz from abc where xyz in '||inClause  into var1 ; 
  

  SS

• Trying to type of SCSI controller with guest operating system list

  I'm trying to shoot a list using PowerCLI of each virtual machine, each SCSI controller and the operating system, it runs. I'm able to pull data very well, but the problem that I am running attempts to export it with anything (html, csv, xml). Here is my script up to now:

  $vm = get-View - ViewType VirtualMachine-property @("nom", "Config.Hardware.Device", "Guest.GuestFullName") | Select-Object - property name, @{N = "SCSI controller"; E={($_. Config.Hardware.Device | where {$_.} DeviceInfo.Label - match "SCSI"}). DeviceInfo.Summary}}, @{N = 'Running OS'; E={$_. Guest.GuestFullName}} | Format-Table - Autosize-Wrap

  The problem that I am running is when I try to make:

  $vm | convetto-html

  It exports which seems to be a GUID ID, but not the actual data. If I echo the variable $vm, I see the data I expect to formatted as I want to, I can't go out only in a format outside of the console. I also tried another method

  $vms = get-View - ViewType VirtualMachine-property @("nom", "Config.Hardware.Device", "Guest.GuestFullName")
  $result = @)
  foreach ($vm to $vms)
  {
  $newrow = "" | Select-object Name, controller, OS
  $newrow.name = $vm.name
  $newrow.controller = $vm | Select-Object - property ($_.) Config.Hardware.Device | where {$_.} DeviceInfo.Label - match "SCSI"}). DeviceInfo.Summary
  $newrow.os = $vm | Select-Object - property $____. Guest.GuestFullName
  $result += $newrow
  }

  It lists the name of the virtual machine, but the other two columns show VMware.Vim.VirtualMachine. Probably missing me something simple here, but I can't understand it. What Miss me?

  Thank you for your help in advance.

  Try this:

  $vms = Get-View -ViewType VirtualMachine -Property @("Name", "Config.Hardware.Device", "Guest.GuestFullName")
  $result = @()
  foreach($vm in $vms)
  {
      $newrow = "" | select-object Name, Controller, OS
      $newrow.name = $vm.name
      $newrow.controller = ($vm.Config.Hardware.Device | where{$_.DeviceInfo.Label -match "SCSI"}).DeviceInfo.Summary
      $newrow.os = $vm.Guest.GuestFullName
      $result += $newrow
  }
  

• System Recovery Options - no operating system listed, need to load the drivers, but don't know where to find this (Windows Vista 64-bit)

  It is a gateway M6866 laptop running Windows Vista 64-bit.

  The computer does not start up--gives "BOOTMRG is missing" error at startup.  I'm trying to boot from the 64-bit of Windows Vista recovery disc.  I clicked on the "repair your computer" option, and it shows the computer loading files.  Then the "System Recovery Options" box appears and asks me to select the operating system to fix it.  The problem is that nothing has listed.  It is said that if your OS is not listed click Load Drivers.  I did, but it is said to insert the device installation media, and then click OK to select the driver.  I clicked on OK and then opens a browser window to select the file.

  I don't know which file I'm supposed to select here.  I searched online for an answer, and someone told him to go to the computer manufacturer's website and download the driver for RAID controller.  I tried to go to the site of the bridge to find it, but it doesn't seem to be one for Vista 64-bit.

  Please please help!  I have to at least be able to extract the files to the hard drive before reinstalling windows.

  Hello

  ·        Have you Configure RAID on the system?

  If you have not configured then RAID on the system, I suggest you to disable the RAID/eSATA (SATA improved) in the BIOS. Once you turn off the RAID/eSATA on the system that your basic hard disk should be recognized by the system because it doesn't require any drivers, it will act as an IDE. Once you have disabled the RAID/eSATA then booting into the recovery environment and build the Bootrec and check if the problem is resolved. I suggest you follow the steps mentioned below to rebuild the bootrec.

  Rebuild the BCD store by using the Bootrec.exe tool in the Windows recovery environment. To do this, follow these steps:

  a. get the Vista installation DVD and pop in your drive.

  b. then restart your computer.

  c. press a key when you are prompted.

  d. Select a language, a time, a currency, and a keyboard or another input method, and then hitNext

  e. click on repair your computer

  f. click the operating system you want to repair, and then click Next

  g. in the System Recovery Options dialog box, click command prompt

  h. type bootrec /rebuildbcd and then press the Enter"" key.

  ·        If Bootrec runs successfully, it will present you with the installation of a Windows directory path. To add the entry in the BCD store, type Yes. A confirmation message appears that indicates the entry has been added successfully.

  ·        If Bootrec cannot findany lack of facilities of Windows, you must remove the BCD store, and then you must re-create it. To do this, type the following commands in the order shown below: (remember to press ENTER after each command)
  bcdedit/export C:\BCD_Backup
  Ren c:\boot\bcd BCD.old
  Bootrec /rebuildbcd

  i. restart the computer.

  For more information, see the article mentioned below.

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• no operating system listed in the recovery of the system (ERD) where can I find the drivers?

  Vista - does not start. try using the repair disk but no operating system is listed for the system recovery options. It is said if the OS is not listed, then load the drivers. What drivers should I charge and where the system are they?

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• Problem with list of contacts after upgrade of the system

  I upgraded my MacBook Pro to 10.7.5 to 10.11.6 and everything seems to be going smoothly, he started and worked

  and ran all programs as planned; However, when I checked my list of contacts that was > 200 people with phone and address information in my 10.7.5 system, the 10.11.6 contacts in the file only had the info address of Apple in Cupertino.

  what I really needed was gone.  Is it possible to restore it? My iPhone still has information

  in contacts but I kinda scared that if I connect my iPhone via iTunes, it might wipe my iPhone contacts as well & that would be a disaster.  I also have a Time Machine backup of the 10.7.5 system that has not been connected to the 10.11.6 system yet.  In addition, all the birthdays, family, appointments, meetings, and special events in iCal application were destroyed as well (but still exist on the iPhone).

  Terry,

  What happens if you choose Contacts > display > display groups?

  

• Import of an opera with 3 cd but iTunes stores between them and combine them in an opera. How can I fix?

  I want to import an opera 3 CD into my iTunes. But iTunes pgm store separately and not combined with an opera. How can I fix?

  There are things you can do to change the tags that control the sorting, but also to change how existing tags to actually sort on the screen. A first guess, I suspect that your CD Rip themselves with a number of CDs as part of the name of the album and making sure that all 3 pictures have one name will bring them to the boot of all.

  Steve MacGuire alias turingtest2 - iTunes and iPod tips and tricks - grouping beaches in Albums - http://www.samsoft.org.uk/iTunes/grouping.asp (old post on Apple Discussions http://discussions.apple.com/message/9910895#9910895)

  Quick response: select all the tracks on the album, file > info (or right-click > news > Details) and give them all a single "album artist", or check the indicator of "compilation" (as in https://discussions.apple.com/message/17670085#17670085).

  If they are several CD sets, you will also need to enter the appropriate information in the fields of number of disk.  If they are not a set of multiple CDs that you must always make sure any vacuum or disc number fields are properly defined.

  Another explanation of hhgttg27 August 2015 - https://discussions.apple.com/message/27784417#27784417

  If they won't even really check this August 2008 post by turingtest2 group temporarily change labels - https://discussions.apple.com/message/7904806#7904806 or http://www.samsoft.org.uk/iTunes/merge.asp - it works often but I have had cases where securities combined when a letter has been added but divorced when he was kidnapped again.

  If they are mp3 files are trying to change the version of the ID3 tag, which can cause iTunes to re - write the tags and clarify inconsistencies.  I use iTunes 7.5 (Yes, from 2007) so I can't tell you where it is in later versions.

  I had a case of grouping stubborn reality.  The tracks will be re-group in a way that has no meaning when I changed metadata.  Without going into details, I deleted tracks iTunes completely, then add the files and they are all grouped together correctly.

• deterministic segfault in DAQmx libs after 49 days of operations with 6110 OR Linux

  I have a program using a 6110 Council OR through 8.04 DAQmx Linux (Suse 11) of 32 bits. After 49 days of operation at 1 MHz (during which the program sometimes stopped and restarted), a segmentation fault occurs inside certain DAQmx libs, as follows:

   kernel: [4286583.578738] nimxs [940]: Segfault at 11 0053af14 sp 017d00a0 error ip 6 to libnidsadd.so [587000 + 37000]

  or

   kernel: [4286589.134512] nimxs [1134]: Segfault at 11 00561f14 sp 015970a 0 error ip 6 to libmxssvr.so [50d000 + 99000]

  It happened 4 times on two different machines, each time with the same availability of machine.

  After the segmentation fault, the cards can no longer be used and are not displayed in nilsdev.

  Is this a known problem of DAQmx on linux and is there a way to recover the other than restart error machine?

  ... and finally:

  before doing what I did in my last post (stopping services and unloading nation, then by restarting the services), restart the nimxs daemon with

  / usr/local/natinst/Max/sbin/nimxs /usr/local/natinst/max/libmxssvr.so

  does everything works again.

  (if the daemon restarts after modules are reloaded, cards OR do not appear with nilsdev but can not be used).

• Outlook Express 6 will open and operated with IE8?

  I've been using Outlook Express 6 with IE8 until recently, but now OE6 will not open. I get a label "unresponsive" in the title of the window, and the program does not open. What can I do to watch my e-mail files that have been downloaded using OE6? I can convert them to a different mail program without having to open OE6? Any ideas would be appreciated.

  IE8 has nothing to do with your problem. Close OE and delete the message store Folders.dbx and see if that fixes it.

  Location of the base of messages

  The path to the message will be very similar to this:

  C:\Documents and Settings\Your User of utilisateur\Local Settings\Application Data\Identities\ {long string of letters & numbers} \Microsoft\Outlook Express

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  Find and Remove Folders.dbx. A new Folders.dbx file will be created when you open OE. Restart first.

  Note these possible side effects:

  When you re - start OE, it will build a new index of all *.dbx files it can read and create a new Folders.dbx. Please understand that you will lose the mail directory structure, all the discussion lists and all synchronization options and message rules will probably have to be edited.

  Outlook Express questions should be asked here in the future.

  XP - Networking, Mail, and getting online Forum
  http://social.answers.Microsoft.com/forums/en-us/xpnetwork/threads

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Can I change the operating with another drive, and then use the recovery CD to restore my operating system on the new drive?

  I have 2 hard drives. I want to replace the smallest disk, which can be found be the operating drive. If I removed and installed another drive and used the recovery CD the I bought with the computer, I'll be able to re - install new hard disk?

  Hello

  Yes, you can change the hard drive and reinstall Vista using recovery disks.

  You may or may not have problems of reactivation.

  If you do, use the telephone option and hold firmly explain to a real person in the situation.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.