Optimize the edge animate cursors/Pages/symbols for major animation projects

Similar Questions

• How to add the chapter name and page not for reference

  Hello

  How to add the chapter name and page not for reference in indesign CS6.

  Thank you

  Please try variable notion of text

• What is the difference between the edge animate adobe and flash

  What is the difference between the edge animate adobe and flash

  Animate dashboard create content in javascript html en 5 CSS3 is the big difference, flash create content in actionscript and you need the flashplayer to play your animation, with lively edge you can see animation in your browser

• How can I get video mp4 for playing the edge animate .oam on page Muse?

  Ok.  I'm pulling my hair out here...

  I am just placing a file of .oam edge animate with video on a page of Muse. The .oam contains a simple icon (that grows and shrinks slightly in a loop to draw attention) that, when clicked (event "on click") made a video .mp4 appear and start playing. Then the video disappears at the end, leaving the new icon (no controls - it just plays and goes when it's done).

  The animation/video playback works fine in edge animate and animate preview of edge browser but when I place the .oam file in my page of muse, the video does not play. I tried the same file without the event 'on click' where the video plays essentially on its own after a second aboard animate and edge Preview in the browser and even once, it does not read in Muse.

  It's embarrassing and I don't know how to solve the problem.

  Does anyone have any suggestions? My .oam file contains a .mp4 file a.webm file, although this will be part of a stand-alone Museum Kiosk and therefore does not need compatibility .webm.

  I'd appreciate any suggestions really.

  I thank very you much in advance!

  Mason

  HA!

  Doggone it! Somehow, I knew that it would work very well for someone else. This seems to be how these things go, isn't it? Exciting video, huh?

  In any case, I use Safari. I tried the image displayed in preview in the preview of the Muse and then tried in "Preview in browser" and it did not work for me. I just downloaded Chrome and will try to image previewed in there. Perhaps that will work.

  Holy crap!  I literally just released the entire HTML for the site of the Muse and opened it in Safari from there and it worked like a champ!  A problem with the perhaps "Preview in browser"?

  Well, color me happy! Perplexed but happy!

• Best way to integrate the CC edge animate as short Intro for Web site

  Hi people,

  I hope I'm in the right forum. I want to take a short animated introduction developed beachfront animate CC and use it as an intro to a Web site. I don't know how is the best way to integrate the animation. I published my animation film, and it works fine by itself. The site of course works fine by itself. But how do trigger you the animation to run from the index.htm page or how it normally does? I hope I'm being clear enough.

  Thanks in advance,

  -TT

  Hi-

  Check this: How to use Edge animate content in your site built with Dreamweaver | Adobe Dreamweaver tutorials CC

  2nd topic on the page, specifically: "adding edge animate the content of sites created with Dreamweaver. Watch the vid and you can see the embed code that it generates. Does that help?

• How can I go back to an earlier version of the edge animate?

  Since the upgrade onboard animate 3 CC, I have not been able to work on my project. Is it possible to revert to a previous version?

  I uninstalled and installed an earlier version, but the file does not open, because he says that he was created in a newer version of the edge. Is there a way to get around this? Can I change something in the code files of edge that will identify the file as being from the previous version?

  I was able to get any work done on this project since the beginning of February.

  I could download Edge animate CC 2.0 by logging into my account of cloud. Then I opened the file edge.js in edge code and I replaced the part where he identifies the version with...

  version: "2.0.1"

  minimumCompatibleVersion: "2.0.0"

  build: "2.0.1.268."

  I had to do this once for the main stage and once for each symbol.

  There is a drop down menu that says only if you are connected to a paid account of cloud, and you can choose to download the old version. It is installed in a new folder, so you can always run the latest version as well.

  

• When booting Vista, the system hangs on page connect for several minutes

  When I start up the logon page is dead for 12 to 15 minutes, iv tried a few things but I'm stumped.

  Hello

  To try to resolve this problem, use the startup clean and other methods below.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• PDF on the edge animate?

  Is it possible to embed a PDF file in edge animate (do appear on the scene or symbol)?

  See here - animate PDFs on the edge

  Darrell

• An error has occurred. Please save your work and restart edge animate! First time I try to open the edge animate.

  I just tried to leave on a dashboard project lead for the first time. When I open the app the splash screen does NOT appear. So I press cmd - N to create a new file, it creates a black file without any action, and when I try to set the height and width of the error (an error has occurred. Please save your work and restart edge animate) appears. I tried to reinstall and it did not help. What should I do?

  Hello

  You can try the steps mentioned in the post on the forum: http://forums.adobe.com/message/6111911#6111911

  Thank you and best regards,

  Roger Simon

• How do I pass a variable from the edge animate to an external JS?

  I need to pass a variable value of edge animate to an external JS file. How can I do?

  Not sure if this is the best way, but works

  The value of the variable as a property of a global variable

  As

  SET

  window.myVar = 'your value. "

  AdobeEdge.myVar = 'your value. "

  Read

  window.myVar

  AdobeEdge.myVar

• I need to number the lines of my page document for the presentation of the journal. Help, please!

  I need to number the lines of a document to be submitted to a journal. I can make a section in the document, but I can't find a command, and then add the line numbers.

  Hi Misha,.

  3 pages includes number of words to display as a menu item in the view menu:

  

  The County appears at the bottom left of the page and it shows more options when you click on it. Unfortunately, "number of lines" is not included in the available options:

  

  If you had ' 09 Pages on your Mac and did not intentionally removed it when you installed 5 Pages, it will always be there, in a folder named iWork ' 09, in your Applications folder.

  Copy your document, open the Pages ' 09 and paste the contents of your document into a word processor new document in Pages ' 09.

  Check that the end of the document is delivered on the same page (number) and to the same position on this page as in the original and making small changes at the margin to adjust it if necessary.

  Then go to edit > tools > statistics to see this more comprehensive report:

  

  Note that if you need to present the newspaper article in one format other than a file of Pages, the number of rows may change due to changes in the conversion to the new format of formatting.

  If you don't have a Pages ' 09, you can get a number of lines using tools > line numbers in OpenOffice or LibreOfficeApache. Both are applications open source, free to download and use (even if you might donate help the future evolution of the demand). The links will take you to their respective Web sites.

  Oh... One more thing (as long as Steve jobs used to say sometimes): pages (3), go (menu) Pages > provide pages of comments and make a feature request so that the line count (and line numbering) added the capability of 3 Pages.

  Kind regards

  Barry

• How to optimize the internet service from Verizon FiOs for Vista

  I agree with Verizon FiOs for internet and phone.  Recently, he was running very slowly, and when I ran a test of speed with the agent of Verizon, transfers came as ~4.96M download / upload de.758M.  In the details, he said the SendBufferSize is fixed to the Verizon Tech [8192] says size memory buffer to send should lie in the range of 6 numbers, but they could not optimize my system as it was a question of Ms.  He informed that he may be a workaround solution to improve the speed and suggested that our forum.  Can someone help me with this please?  Thank you.

  Hello

  I suggest you run the fix that he mentioned in the article below and check if the problem is resolved.

  You cannot use Verizon FiOS products at their full speed on a Windows Vista-based computer

  http://support.Microsoft.com/kb/939006

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Behavior of font style incompatible on the edge of reflow CC (Preview) for Windows

  Adobe Edge reflow CC Preview for Windows has a very inconsistent behavior on the font styles. Why there is no button to "BOLD" in the user interface? Why I have to type 'fat' in the text box of the dialogue weighting to have my designer text return as chrome? Why the text in a box/div style with the Italic button makes reflow but not in Chrome?

  Solved! CC of reflow of edge will allow you to copy and paste HTML Code CC (Preview) edge in a text box/span, but it displays "intelligently" only "text" you pasted. However, if the HTML code you copied includes a duration with a style, this confuses reflow and causes the very erratic behavior described above with the style of text that appears to the failure of inconsistently.

  Solution: no copy / paste something else than plain text in a text to reflow box/span.

• Change default code in the "Create a new" page HTML for CS3

  When I open dreamweaver and go to file > new > Virgin Page > HTML, the code that appears when opening the page is not what I want. For example, I would change the DOCTYPE XHTML 1.0 strict (of transition).

  Is there a way I can enter for the backend of this program and modify the code so I don't have to do it manually every time I open an empty html page in DW? Or can I make my own and then make my default html page code?

  Thank you

  Luke

  When you choose FILE > new, you will see a button at the bottom of the interface preferences.  A click on that and you can choose how the 'new page' display when you open a new document.

  

• How can I keep the integrity of my page framed for less than 100% resolution?

  If I change the lower screen resolution 100% my left frame aligns to the left of the screen and the right frame is aligned with the right side of the screen, leaving an empty space in the middle.

  DW will be much easier to learn if you spend a few days to learn the basics first.  HTML and CSS are the ABC and 123 Web design.  If you don't have a knowledge base of web terminology code, DW will be a fight aside for you.

  Start here:

  http://w3schools.com/

  Then work your way through this tutorial in 6 parts.

  Create your first web site DW - CS4
  http://www.Adobe.com/devnet/Dreamweaver/articles/first_cs4_website_pt1.html
  

  Good luck

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web.blogspot.com