When booting Vista, the system hangs on page connect for several minutes

When I start up the logon page is dead for 12 to 15 minutes, iv tried a few things but I'm stumped.

Hello

To try to resolve this problem, use the startup clean and other methods below.

What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).

----------------------------------------------------

Follow these steps:

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

==========================================

After the foregoing:

How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685

Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).

How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

A quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------

Tools that should help you:

Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

Autoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

There are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.html

There are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.html

Window Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.asp

Many excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/

===========================================

Vista and Windows 7 updated drivers love then here's how update the most important.

This is my generic how updates of appropriate driver:

This utility, it is easy see which versions are loaded:

-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.

Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

===========================================

Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.

Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-us

Performance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

Hope these helps.

Tags: Windows

Similar Questions

  • BlackBerry Smartphones Pls help me my 9860 touch hangs when boot nd the system does not recognize the usb port when it freezes on startup

    Recently, my 9860 touch starts not finished... It stops at halfway when startup nd freeze... 2ndly starting my system recognizes usb d port, but when it comes to where it stops booting, the system doesn't see it me collapses more so to reload the software

    Hello Dtobs007

    Welcome to the community

    I recommend you try first method Mode without failure. Article ID: KB17877 How to start a mode BlackBerry smartphone without failure.

    Another thread explains how to fix this problem, for your reference.

    By JSanders. http://supportforums.BlackBerry.com/T5/BlackBerry-torch/BlackBerry-torch-9860/TD-p/2597381

    See you soon and good luck.

  • Option wireless "walk between the conference rooms"? (maintain connection for 10 minutes)

    I feel that I read on this whne I was looking at the x 220 customers. Is this an option - and if not is it possible to recreate it in function in power options?

    To reiterate that it is: it allows you to close the lid of the laptop, to walk in a different room, open the cover and still be connected to your wireless network.

    Thank you.

    Shiren salvation!

    'S called it InstantResume, and the setting because it is in power, under use Manager the power base, or Global mode in Advanced Mode.

    Tell us how it works for you.

  • When I connect windows, the hard disk works for several minutes

    Hello

    A few months ago and after installing some windows update (XP Sp2), I see when I login to windows, drive hard work continuously for several minutes and speed goes down.

    What windows software using the hard disk with log in?

    Thanks in advance

    motasemsadelghi

    What you see could be linked to a task that you have schedules (such as anti-virus, defragmentation of the hard drive, etc)

    Check the tab startup in MSConfig for items which currently running as part of the startup of your PC. See

    http://support.Microsoft.com/kb/310560

    The foregoing is for XP, but also applies to Vista.

  • How can I prevent the Vista layout muted sound when I lock the system?

    In the last days Vista began muted sound of my computer when I lock the system. It did not before. I don't understand how or why it started. This has caused some applications to stop using sound altogether when I unlock the system.  I don't want Vista to turn off sound when it is locked.  How it stop doing that?

    Thanks for the reply.  I could solve the problem. I had a number of non-essential Windows updates that were listed in Windows Update.  I upgraded to MS Security Essentials, 2 security for MS Visual C++ and nVidia Display updates.  Also, I used Vista to find the updated drivers for one of my cards (Realtek HD Audio sound), and he said that my driver is up to date.  But I found a newer Realtek HD Audio driver from the Realtek site and updated with it.  I rebooted after the two installs (updates of Windows were in a facility) and tested my audio problem / locking and audio stayed on when the PC was blocked, that's what I wanted to like Vista of inhibition during the closure was causing problems with use of some software 3rd party audio after you have unlocked.

  • Redirect users to the page when you take the system into maintenance mode.

    I want to redirect users to the page when you take the system into maintenance mode. We are on 12.1.3 application. Please provide me with the document who have these details

    Please see old threads that deal with the same subject.

    http://forums.Oracle.com/forums/search.jspa?threadID=&q=redirect+and+maintenance&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001
    http://forums.Oracle.com/forums/search.jspa?threadID=&q=maintenance+and+message&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001
    http://forums.Oracle.com/forums/search.jspa?threadID=&q=outage+and+maintenance&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001

    Do a search of the forum before posting similar questions.

    Thank you
    Hussein

  • How to remove McAfee security scran more my boot of the System Configuration.

    Hi, my laptop is a Windows vista 32-bit, I have a problem to remove McAfee Security scran more my boot of the System Configuration. In fact, I had used the removal tool to remove the antivirus McAfee sofeware eralier. But when I opened my startup Configuration recently, I noticed that the McAfee security plu scran is still there, I have turn off, but couldn't delete it. Help, please. Thank you.

    Gary

    Hello

    1. are you able to uninstall successful McAfee software?
    2. is there an error message or error code while you uninstall McAfee software?

    Try the following and see if it helps.

    Method 1:

    How to uninstall McAfee Security Scan Plus? : http://service.mcafee.com/FAQDocument.aspx?lc=1033&id=TS100783

    See also: http://promos.mcafee.com/LegacyLp/en-us/affiliates/adobe/landingpages/np681.asp

    Method 2:

    Uninstall if you have any program name McAfee Security Scan Plus on your computer.
    Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

    See also:

    Solve problems with programs that cannot be installed or uninstalled:http://support.microsoft.com/mats/Program_Install_and_Uninstall

    Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

    Method 3:

    The System Configuration utility displays the items that start with your computer. These items are usually in one of two areas. The registry or during startup.

    If you decide to prevent specific items from start until you can uncheck the in the System Configuration utility. Although this method is very good, it is ultimately preferable to delete them from the source. To access the common locations in the registry of these elements take a look in the following areas:

    Note : open the registry editor by clicking the Start button, type regedit into the search box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

    HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunOnce

    Hkey_current_user\\software\\microsoft\\windows\\currentversion\\run

    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Runonce

    If you have disabled items in the System Configuration utility and want to remove the registry also they lies in one of the following locations:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SharedTools\MSConfig\startupfolder

    HKEY_LOCAL_MACHINE startupreg

    Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  • Unable to install Windows Vista, the system freezes at copying files and the extension of the files

    Original title: Setup error

    So I installed window vista Ultimate edition on my Mac, like two windows. I backed up all of my hard drives. so when I started to install everything went well until when it came in part from extension of files and copy files to the * something *. After like 20 minutes I had this error saying could not complete the installation because of corrupted files or something and then he is out. I tried homebasic, home premium etc. but I received an error even for each other. I went to the dealer where I bought the cd, returned and got another but still have the same thing

    Hello

    ·        What are your system specs?

    ·        How you try to install windows vista on the system? After the start of the desktop?

    ·        What is the exact error message that you experience when the system hangs during the installation?

    I suggest you to disconnect all external devices that are connected to the system such as (printers, scanners, etc.) and see if the problem is resolved.

    This occurs mainly, if the system (hardware or software) is not compatible with the operating system that you are trying to install on the system. I suggest you to format the partition in which you try to install Windows Vista, and then check if you are able to install the operating system or not.

    Installation and reinstallingWindows Vista

    http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

    I suggest you to check the below link.

    http://social.technet.Microsoft.com/forums/en-CA/itprovistadeployment/thread/6cb6510d-3e4f-4611-ba73-7e68fc4aa0a6

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • When I start the system, I get the message "failed to load Launcher dll" I hit OK and the system load and seems to work.

    I am under Windows Vista Home and when I start the system, I get the message "failed to load Launcher dll" I hit OK and the system load and seems to work. I'm afraid that something is not correct, what do you recommend? The two available Service Packs have been installed.

    Discussions were merged.

    Deleted duplicate.

    Original title: failure of the Dll

    The error seems to be a common problem with Dell laptops:

    http://en.community.Dell.com/search/#q=Lanucher%20dll&sort=rating%20desc&defaultAskForumId=0&pi1680537405=1

    It seems that apoint.exe gives the error that indicates that the problem is with the Alps touchpad driver.

    Try to uninstall the Alps touchpad driver and then install the latest version available from Dell for your laptop:

    http://www.Dell.com/support/home/ca/en/cabsdt1/product-support/product/Inspiron-1545/drivers

  • I have the Windows Vista operating system. Whenever I connect my computer, I get two pop ups on the taskbar. One is jucheck.exec and another is updates of Java.

    I have the Windows Vista operating system. Whenever I connect my computer, I get two pop ups on the taskbar. One is jucheck.exec and another is updates of Java.

    I have no way to uncheck the premiera. I have only two options, restore or close. With java, I opened the properties and click to remove the check mark from updates, you click on apply and then clicked on ok, but he still continues to appear you have tips on how can stop these pop ups?

    Hello

    I would like to inform you that Jucheck.exe is the process that runs automatically when the Java Update tool is activated. Jucheck.exe usually checks the Internet for the software updates available and invite you to install them to keep your updated program. If you prefer to search and download the Java updates manually whenever you want, disable Java Update automatic tool disables and removes Jucheck.exe

    It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  • Envy 17 2180el can I add a second hard drive, and then choose bios/boot of the system with which to start?

    Envy 17 2180el can I add a second hard drive, and then choose bios/boot of the system with which to start?

    in the case give me the link of a hard disk of type to add

    Hello

    While you can certainly add another HARD drive in the Bay of secondary drive (you must also support and the connection cable) you can't boot from it - only in the Bay of primary HARD drive is bootable.

    Kind regards

    DP - K

  • I installed the latest version of flash player and it said installed successfully and I can use it very well, but when I checked the system requirements do not match. She required 2.33 ghz and I 2.13 ghz. then that cause problems on my computer? I h

    I installed the latest version of flash player and it said installed successfully and I can use it very well, but when I checked the system requirements do not match. She required 2.33 ghz and I 2.13 ghz. then that cause problems on my computer? I have an intel i3 proccessor, windows 7, internet Explorer.

    All processors Intel i3 having at least 2 hearts, your specifications far exceed the requirements; See http://ark.intel.com/products/family/75025#@All

    I have some computers with much slower processors, and Flash Player 14 works perfectly well on them also.

  • When Windows starts it is always a dialogue box that flashes on the screen and the CPU usage high (above 50%), after I connect sometimes for several minutes.

    Original title: at the start of Windows there is always a dialogue box that flashes on the screen, but I've known idea what it is.

    How can I determine which program is using this dialog box? I also don't expect high utilization of the processor (over 50%) after that I connect sometimes for several minutes. I see not all applications running in the Task Manager. The amount of CPU utilization in the services tab doesn't match what I see compared to what the gadget is read in my sidebar. Any ideas?

    Thanks in advance

    Hi Soan,

    1. What is exactly mentioned in the dialog box?

    2. when the problem started?

    3. did you of recent changes on the system?

    Method 1:

    Step 1:

    You can check if the problem occurs in safe mode.

    Start your computer in safe mode

    Step 2:

    If you are not faced with the question in safe mode, you can perform a clean boot and check.

    A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

    Method 2:

    You can read the following article and perform a full scan of security on your computer.

    Microsoft safety scanner

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss. You can take a backup of important data before performing analysis.

    Method 3:

    You can also read the following article and try to optimize the performance of Windows Vista.

    Optimize the performance of Microsoft Windows Vista

    Hope this information is useful.

  • Since the update Firefox 6.0, some websites do not load correctly. I suspect it has to do with the Java being disabled because of the compatability modules. When I try to go to Tools/Add-ons, I get the message "Loading" for several minutes without chang

    Update Firefox 6.0 is useless to me because many websites I visit are not displayed properly, I guess because the Java modules are disabled because of incompatibility. They appear correctly in Internet Explorer.

    In addition, the add-on from Trend Micro is not compatible, which leaves me with a positive feeling.

    When I try to check to see if these modules can be updated, the menu item Tools/Addons just goes to a page with "loading" and stays there for several minutes without change until I close it.

    I would like to know the procedure to regularize this version of Firefox to my previous version that worked.

    Firefox 5.0/5.0.1/4.0/4.0.1 and earlier 3.6.20 all contain questions of security and stability that will not be corrected. You put your system at risk by using any version of Firefox that 6.0 or 3.6.20. Any person who displays a link to other versions is to be irresponsible, in my opinion.

    Java

    If the incompatible extensions in Add-ons > Extensions are Java Console, you have no need them unless your doing Java development. Most of the users have not yet installed, but Java will install Java Console with each update. You can delete them manually:

    The only thing that affects the functioning of the sites/Java applets on the web is the plugin (Add-ons - > Plugins) "Java (TM) Platform SE (version)". Do not forget that it is enabled and that you have not all extensions which affect/block "scripts".

    Trend Micro

    You must contact Trend Micro or go to the forums on their website to inquire about their plans to update the add-ons/toolbars they install in Firefox.

    Problem with the display of the Add-ons Manager

    The Add-ons Manager gets in a loop of loading due to the recent update of Firefox 6 and servers being overloaded because users and update process are looking for updates to the add-on. If you stay away from the "Get Add-ons" selection on the left of the screen of the add-on Manager, you should have no problem with that. This situation is expected to resolve when the overload of Firefox 6 update is complete. I do not always use this "Get Add-ons" option, instead, I go to the website of modules and the search for what I want from there: https://addons.mozilla.org/en-US/firefox/search/?q=clone & cat = all & x = 0 & y = 0

  • System hangs after installing UPDATE for Windows XP (KB955759)

    Update for Windows XP (KB955759) installed on my system without problems. Once the system reboots and the Office rises, the system hangs.

    Are there any known issues or fixes for this?

    The system is XP Pro SP3

    Thank you!

    Run the 'unsubscribe' Fix It (left hand) on this page and you do not need KB955759: http://support.microsoft.com/kb/954157

Maybe you are looking for

  • Get the value of the frequency of the power spectrum

    I'm rather new to LabView and want to measure the frequency of the peak in a spectrum of power of a real signal. In addition, I want this value of frequency and amplitude to save to a file. Right now I am able to trace a spectrum of power using an ex

  • The data in a loop of consumption does not evolve

    Help! I am reading different voltage to an interval of 500ms in a loop of producer and move to the consumption loop. However, I notice that the values in the loop of the consumer do not change even when the voltage has changed? What can I do?

  • How to deal with "Outlook" pst files

    Hi guys, just a message quicky, for various reasons in recent weeks I have had problems with my Microsoft Outlook, which I use for e-mail, etc.. I have created a number of .pst files and would like some advice as to how best to group them into a sing

  • E1-510 Acer with windows 10 installed, should I update bios 2.12 new version I have now 2.5

    I have an acer laptop e1-510.  I have upgraded to windows 10 then clean installed the operating system.  I went to the acer site and there is no windows 10 drivers than ect, but I have noticed that there are updates bios newer than the one I installe

  • Faulty network adapter Dell Latitude D630 XFR Constant.

    From a few weeks ago, my laptop started acting funny. Whenever I played Robocraft, it gives me this error message whenever I try to play on a server. Even with Garry s Mod Unplug it at random, but the State in the notification bar shows full bars / 4