Option "Unpack new tracks" is missing?

Similar Questions

• a section of a Copy imported audio track and stick to the new track

  I need to copy part of an imported audio file and create a new track of just what I want.

  It seems to try to record audio track 1 on audio track 2 does not work.

  3DS3 wrote:

  I need to copy part of an imported audio file and create a new track of just what I want.

  Click on the region imported to make sure that this option is selected

  Drag the slider to the beginning of the section you want and press command + t

  Drag the playhead to the end of the section you want and press command + t

• SQLEXEC on each new track file or simply on replicat begin to capture current FILESEQNO?

  Dear community,

  I need to capture fileseqno Treaty of the trail than replicate file. But I need to capture him once without overhead of adding column fileseqno to the target tables.

  I clearly understand that the use of colmap (usedefaults, FILESEQNO = @GETENV ('RECORD', 'FILESEQNO')) inserts the value of fileseqno for all records captured in newspapers, but what I want to accomplish is to react to the change number of fileseqno event while replicat is running.

  Logical extension of the application I have in fact just to capture the first trail, which is treated by replicat fileseqno.

  What I've tried so far is to use the following settings to replicate (given the two tables have to be replicated):

  table m.EventHead,
  sqlexec( id set_first_seq_no1, spname pk_replication_accounting.set_first_seq_no, params( a_fileseqno = @GETENV( "GGFILEHEADER", "FILESEQNO" ) ), afterfilter ),
  filter (@coltest( set_first_seq_no1.a_fileseqno, NULL ) or @coltest( set_first_seq_no1.a_fileseqno, MISSING ) or @coltest( set_first_seq_no1.a_fileseqno, INVALID ) ),
  eventactions( ignore record );
  table m.EventTail,
  sqlexec( id set_first_seq_no2, spname pk_replication_accounting.set_first_seq_no, params( a_fileseqno = @GETENV( "GGFILEHEADER", "FILESEQNO" ) ), afterfilter ),
  filter (@coltest( set_first_seq_no2.a_fileseqno, NULL ) or @coltest( set_first_seq_no2.a_fileseqno, MISSING ) or @coltest( set_first_seq_no2.a_fileseqno, INVALID ) ),
  eventactions( ignore record );
  
  

  pk_replication_accounting.set_first_seq_no is defined in the package as

  procedure set_first_seq_no( a_fileseqno in out pls_integer );
  
  

  With the filter clause, I tried to load GG for SQLEXEC only for the first record captured for each table, but without success. Stored procedure is shot several times on each record in the log file.

  As far I understand autonomous SQLEXEC is not able to get the value of @GETENV ("GGFILEHEADER", "FILESEQNO"), although I have not yet tried.

  Another way, what I see, is to instruct extract to add a record of false for each new track file and then to process within the card with SQLEXEC clause. For example, if SOURCEISTABLE had by effect of the table, then we could get our unique record for each trail using the double table:

  sourceistable
  table dual;
  
  

  I still don't know how to get the required behavior.

  Please help if you know workarounds.

  Has managed to capture the current fileseqno for each start to replicate with the following parameters:

  ignoreupdatebefores
  --
  map m.EventHead, target gg.tmp_gg_dummy, handlecollisions, colmap ( id = @GETENV ("RECORD", "FILERBA") )
  sqlexec( id set_first_seq_no1, spname pk_replication_accounting.set_first_seq_no, params(a_fileseqno = @GETENV( "GGFILEHEADER", "FILESEQNO" ) ), afterfilter ),
  filter (@getenv( "STATS", "TABLE", "GG.TMP_GG_DUMMY", "DML" ) = 0), insertallrecords;
  --
  map m.EventTail, target gg.tmp_gg_dummy, handlecollisions, colmap ( id = @GETENV ("RECORD", "FILERBA") )
  sqlexec( id set_first_seq_no2, spname pk_replication_accounting.set_first_seq_no, params(a_fileseqno = @GETENV( "GGFILEHEADER", "FILESEQNO" ) ), afterfilter ),
  filter (@getenv( "STATS", "TABLE", "GG.TMP_GG_DUMMY", "DML" ) = 0), insertallrecords;
  

  tmp_gg_dummy is defined as follows:

  create global temporary table gg.tmp_gg_dummy ( id number( 14, 0 ) ) on commit delete rows;
  
  alter table gg.tmp_gg_dummy add constraint tmp_gg_dummy_pk primary key ( id );
  /
  

  Procedure is triggered only once by each replicate early and report file displays the following text:

  From Table m.EventHead to GG.TMP_GG_DUMMY:
  
    Stored procedure set_first_seq_no1:
           attempts:         0
         successful:         0
  
  From Table m.EventTail to GG.TMP_GG_DUMMY:
         #                   inserts:         0
         #                   updates:         1
         #                   deletes:         0
         #                  discards:         0
  
    Stored procedure set_first_seq_no2:
           attempts:         1
         successful:         1
  

  Although mapping of origin of m.EventTail

  	#	Inserts:	69
  	#	updates:	21
  	#	before:	21
  	#	deletions:	0
  	#	Releases:	0

• Takes are silent when copied and pasted into the new track

  After recording several takes of a vocal part and a model gliding around how I like it, I decided to dub the voices and use another part of the (unused) takes.

  I created a new title in doubles (CMD - D) and pasted the vocal track (including), but the new double track is silent.  I can see the track and everything going out there and tried to remove plugins, copy and paste in different ways, but the track and just stay silent.  I can see them all here in the new track, and all that I can see, they should be heard.

  I tried this search anywhere online and cannot find any mention of this problem anywhere.  Is this just a bug?  I forgot something?

  What version of logic you use.

  It worked well here with 10.2.4

  Also how do you 'stick it '?

  After a screen capture of your page to organize with open mixer

• New track route?

  Hi all

  First of all, I'm migrating from Logic 7.

  I want to add a 1 bar "slide" into an existing guitar track guitar (this is where I had previously just stopped and did not play for this bar)

  Logic7, it would be just another path assigned to the same track directly below.  This way you can position it exactly where I wanted to.

  As if I have a 2nd 'take', but the piece that I is cut in a guitar part later.

  Can I create an extra 'way' assigned to the same guitar track?

  I hope I'm making sense... It may be that this version of logic works, simply another way.

  Thank you

  G

  Hello

  Granger morton wrote:

  Can I create an extra 'way' assigned to the same guitar track?

  Choose track > others > New track with the same Instrument (or New track with the same channel)

  TDC

• How can I synchronize a new track to the audio spectrum, effects and audio amplitude logo

  Hello!

  How do I paid recently a graphic designer to create a sound model for my music on youtube channel, but the problem is that I do not know how to synchronize a new track to the audio spectrum, the effects and the logo of the audio amplitude (pumps logo to the sound of the track that he gave me in the layout) but I would like to synchronize it instead of a new track at all. [Please help:]

  Click on the tab "LOGO of MOUNTAIN" or double-click the color icon in the Panel layer to open the publication.

  Import the audio file in the project Panel.

  Click on the new audio file in the project Panel to highlight.

  Click on the 'old' audio file in the Panel layer to select it.  (they are both put in evidence now)

  Now, hold down the 'Alt' key and then drag the new audio file of the project on the old audio layer panel in the layer panel.

  Doing it this way will automatically do all necessary connections to the old file to the new file.

  Or... you could just drag the the new audio tracj in the Panel layer compositions 'sound '.

  Select the solid layer that has the applied Audio Spectrum effect.

  Then in the Audio Spectrum effect setting pane, find the list at the top of "Audio Layer" drop-down list, click the menu drop-down and select the new audio layer.

• It seems to be a bug in the tool of fluidity in CS was last updated. It whitens fault area when it's done. Or it it some new setting I missed?

  It seems to be a bug in the tool of fluidity in CS was last updated. It whitens fault area when it's done. Or it it some new setting I missed?

  Hi Rmwpro

  It is a known problem. We are working on a solution.

  Please see using fluidity on the results of the 16-bit image areas clearer around the changes for the workaround in the meantime.

  Concerning

  ~ Assani

• Weird sync/time issue when mixdown or bounce to new track

  Hello

  I have a synchronization problem when mixing or bounce to new track with waves Tune enabled. If I turn off the Tune of waves, everything works well, timing is correct after mixing or bouncing to the new track. If I activate the Tune waves and bounce a clip to the new track, it will create a clip with the same length, but the head seems to be cut and tail is stretched full length (I guess). In addition, when I listen to the clip bounced back, it seems that the waves Tune does not work. I tried to export audio mixdown on and got the same result: problem of synchronization and waves Tune doesn't work. Here's the catch:

  

  As you can see, the above clip is the original and the clip here is the clip from boucned. There is a slight difference between the two clips.

  Does anyone have the same problem like this? I really appreciate for your help.

  Thank you

  Hello

  To convert, you need to download the shell2vst. Just google and you will find easily. I can't download the file here for you, but if you are having difficulties finding, PM me your email and I'll send it to you! As far as I know, it works with waves plugins but don't know if it also works with others. It is also simple to use, just drag the shell of waves in the shell2vst file, and it will create all the plugins vst2 in waves.

• How to make clips to a new track?

  I have clips with video effects and I want to make a new track (with the applied effects), is it possible to do it right from the first edit in the timeline? How?

  Thank you!!!

  The process you explained can be achieved with nesting.

  Apply the barrel distortion > right-click on the item and select niche > add the rest of the effects to the nested element.

  If you double-click on the NEST it should open up to your original clip barrel distortion has been applied to so that you can adjust it if necessary.

• New shortcut text missing in the right click option...

  Hello

  I have problem in windows 7 the new option of text document in the right click menu is missing...
  PLS HELP ME...

  Ensure that this key exists HKEY_CLASSES_ROOT\.txt\ShellNew\NullFile

  If it does not exist, create it. Just right click in the right pane of the C:\windows\shellnew key,
  and select New/String value, and then type: NullFile

• The option 'Install new font' missing from the file menu.

  I did a "search forum" and has not found the solution to my problem, so I apologize if it's here somewhere under a different title. I looked on the microsoft site itself, as well as Google search. Here's my problem:

  I am trying to install a new font, but do not have the option in the file menu of police record. It's just not there. I am running Windows 7.

  Thanks for any help you can give!

  Brandi

  Too bad! I googled some more and found my answer.

  For those who overlook the obvious like me, once you download a new font, open it, and there is a button 'install new font' just there. Yay!

• New Separator button missing?

  I realize that this question was already asked, but to reply or create an account just to reply - I had TO ask a question.

  But I know that the new Firefox interface is here, it couldn't hurt to put the separator button in the option available for me to drag the toolbar main or tab bar. The question I have is just the separators in the way I have customized Firefox, but if I take them off there is NO WAY to retrieve them. I am not advocating the universe, just a separator button...

  It's the original question to which I refer: https://support.mozilla.org/en-US/questions/997546#answer-564898

  You can vote for this bug;

  • bug 985308 - Australis - Missing "Flexible space", "Space" and "Separator" in the Customize screen

  Please, do not comment in bug reports
  https://Bugzilla.Mozilla.org/page.cgi?id=etiquette.html
  You can vote for a bug to show your interest
  https://Bugzilla.Mozilla.org/page.cgi?id=voting.html

• Windows 7 | Context menu | new text file missing?

  Hi, I'm currently break my head on this problem I have. All of a sudden miss me the 'new text' file option in the context menu.

  I mean, bloody iv had it a few days ago and now all I get is a RTF document. Even if I rename the document in .txt .rtf, he wrote again a few _ bull inside.

  In any case it isn't a real problem for me because I use notepad ++, but again, I don't like it when things on my computer happens I don't know so what I want is someone explain me how exactly this could have happened.

  Hi Nortd,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the developer IT Pro audience on MSDN. Please post your question in the MSDN Forums. Thank you!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• File-> new - Photomerge Panorama missing

  Hi, I would like to create a new panorama in PSE11, but the option to do so seems to be missing. If I choose Enhance-> Photomerge, the Panorama option is grayed out. Any help?

  Thanks in advance.

  Update: a little later: all of a sudden it seems to work under Enhange-> Photomerge and then Panorama is not dimmed more.

  Post edited by: pluim003

  Panorama is not available in quick and guided editing modes. It would therefore be grayed out in these modes

• Why is there not an option for new tabs to open to your homepage?

  It was an option in previous versions of Firefox. What sense does make to remove features?

  I don't want to medium, click my home button and it is absolutely ridiculous to have to install an additional addon to restore the basic features that were included in the versions that came out 5 years ago.

  What is the problem?

  Firefox has never had this feature.
  
  The 269664 bug that you mentioned is on deleting the pref browser.tabs.loadOnNewTab no is longer supported in Firefox that had the Mozilla Suite and SeaMonkey is still supported.

  If you do not use an extension, then your only option is to Ctrl left click or middle - click the home button on the toolbar.
  
  The extension will also open a new tab with the homepage with the Ctrl + T keyboard shortcut.