Options for configurable customer values

Similar Questions

• Call doSubmit() with custom value does not update process

  I have a page with a standard form that has a "Save" button, but also a button that I have manually created via an anonymous PL/SQL block in the source of the element of a field on the form. (I did because I was already using a PL/SQL block to display the value of the item, but wanted to update the button appear immediately next to him, rather than somewhere on the page template.)
  
  Originally, this button was just a simple redirect to a separate detail page, but I found that if the user has made changes to the form, then click on this button, these changes would be lost. So I changed it to a call doSubmit() instead. But I had to distinguish between the user pressing the "Save" button and the custom button, the button call doSubmit ('CUSTOM'). I then created a branch that has verified the value of demand and went to the appropriate page that was pressed.
  
  What I found was that the process to update the underlying table for the form had not shot, even if it is unconditional, and therefore updates the original form have been lost.
  
  I eventually worked around this by changing the button so that instead of calling doSubmit with a custom value, it calls a JavaScript function that: 1) define a hidden field to '1' and 2) called doSubmit ('SAVE'). Then, I changed the direction to look at the value of this hidden field, rather than the value of the request. That has worked well.
  
  So this got me thinking: why my original implementation did not work?
  
  I suspect that doSubmit() only works to the custom of the values if you have defined a real button in the designer of the ApEx and configured with a name for this custom value. The HTML code for my button seems indistinguishable from a button created by ApEx, I think that there is something that happens behind the scenes to make doSubmit() work simply with a random value.
  
  Can anyone confirm or deny this hypothesis?

  Hello

  Could this be your problem:
  If you have a treatment of automatic line (DML), which only fires from below, if I understand correctly

  Valid Update Request Values: SAVE, APPLY CHANGES, UPDATE, UPDATE ROW, CHANGE, APPLY, APPLY%CHANGES%, GET_NEXT%, GET_PREV%
  Valid Insert Request Values: INSERT, CREATE, CREATE_AGAIN, CREATEAGAIN
  Valid Delete Request Values:DELETE, REMOVE, DELETE ROW, DROP
  

  At least on Apex 3.2

  BR, Jari

• Cisco asa 5585 syslog options for ips?

  We have CISCO ASA 5585 with a separate module for the IPS, I want to know what are the options for configuring syslog? Its almost impossible to find; and there are some forums on the internet that says cisco ips store the logs in native format / owner and cannot be exported.

  Please provide details

  Thank you.

  Click on the following link

  https://supportforums.Cisco.com/document/47881/SDEE-and-IPS

• Get the value based on the column names for the custom of the Webcenter content metadata field

  University Complutense of MADRID, I created a custom text metadata field.  I then activated optlist this area.  I fill the optList values, I use a view.  The view has three columns.  Let us call their ID, Key, Value.  OptList shows keys in its list.  I then create content (Content ID: MyContent) Webcenter content and choose the OptList values for my new field of metadata (MyField).

  WebCenter portal, I'm filling a selectOneChoice with MyField values in the content ID: MyContent.  Remember the previous step, the values entered in selectOneChoice lists them selected values from the field MyField optList.  The optList is filled from view.  After the user selects a value in selectOneChoice, in Javascript, I need to alert a message in this format "selected value - matching value from the view of the optList that fills MyField.

  In my opinion, only an example will be useful:

  This is a view that I created in Configuration Manager applet in Webcenter content Admin cmdlets :

  ID | State | Capital

  1. North Carolina | Raleigh

  2. California | Sacramento

  3. Illinois | Chicago

  Then I create a custom field (name: MyField).  MyField is an optList values are filled with view created above.  Internal value and the display value are the two State.  Then I have a new content with Content Id Check-In: MyContent.  To MyContent, I select these values in OptList MyField: {North Carolina, Illinois}.

  In my portal Webcenter application, I create a Taskflow presenter content.  I have set up as single content item presenter.  I attribute as content ID MyContent.  Then, in templateView, I get all the values of MyField in MyContent and display as selectOneChoice.  I created a javascript function that would get the value that the user selected in selectOneChoice.  In the view created in the Webcenter content Configuration Manager (see above), there is a value corresponding to each displayed value.  So, for the selected value, I need to get the corresponding Capital and display in my alert message.

  Starting from Javascript, how can I get the value of the Capital, since I have the status value.

  Hello.

  The idea to reach your requirement is planned:

  • Create an Assistant manage bean that will appeal as access map: #{stateUtil ['Calofironia']} (it will return Raleigh). This value will get calling GET_SCHEMA_VIEW_VALUES IDC service using RIDC in your managed bean.
  • Pass the result of #{stateUtil ["statename"]} to your JavaScript function to help

  I hope this information help you.

  Kind regards

• Is there an option for a default application configuration in weblogic?

  Hi guys,.
  
  I have an application deployed on a server admin.
  
  I access my http://localhost:7001 app / browsestore
  
  I want to access the application only if I enter http://localhost:7001 in the address bar
  
  Is there an option for a default application configuration?
  
  Thanks in advance :)

  Hello

  OPTION - 1).
  Assign the value of the 'context root' as element.
  It will make your WebApplication a default web on the server application...
  To change the root of context in weblogic.xml next entry is necessary:
  Example:
  
  
  /
  

  OPTION - 2).
  If you do not want to change your "weblogic.xml" and then log in to the admin console-
  Servers---> YourManagedServerName (Click)---> Protocol (tab)---> Http (sub-tab)---> the default Web application context root:

  NOTE: -.
  In the field above, please specify your root context WebApplications that precedes a slash (example: /MyContextRoot)...sothat after the restart of the server the Application will become your default WebApp servers...)
  .
  .
  .
  Thank you
  Jay SenSharma
  http://jaysensharma.WordPress.com (WebLogic wonders are here)

• No option to configure the card credit or debit for Applepay on my SE

  Hello!

  I just changed my 5 in an SE and wanted to create pay Apple, but as soon as I open the application portfolio, there is no option for the addition of debit or credit card, only to scan passbords. And I have the same problem on my Air 2 as well. I have the latest version of iOS on both devices. I am currently in Hungary (if this is important).

  Please help me, because I have no idea what is wrong.

  I thank in advance

  Mate

  Hi Mate,

  Just follow the instructions in this article to support > configure Apple pay on your iPad, iPhone, or Apple Watch - Apple Support

• Where can I find the options to configure the IP address, gateway, DNS and network mask for my ethernet connection?

  original title: Ethernet configuration

  How/where can I find blue page that displays: IP address, gateway, subnet mask, DNS

  Hi Dr. Pasquale,

  ·         Are what blue page you referring?

  If you need to find the IP address of your computer you can use the prompt to to do. You have ti use the ipconfig command to get the details.

  a. Click Start, click Run.

  b. type cmd and press ENTER.

  c. type ipconfig and press ENTER.

  See the following articles for more information.

  Microsoft Windows XP: Ipconfig

  The syntax and Options for using the Ipconfig Diagnostic Utility for network connections

  If this isn't what you're looking for then respond with more information so we can help you best.

• I'm trying to set up an Ad Hoc network, but there is no option for the Ad Hoc network configuration when I go into the network and sharing Center.

  I looked at how to make a point of my computer because I have a usb wireless internet device for my laptop and I tried to get an ad hoc network setup but there is NO option for the CONFIGURATION of the NETWORK AD HOC when I go to network and sharing Center... what should I do?

  original title: ad hoc isn't here...

  Hi NickBean2,

  You can refer to the following articles and see if it helps.

  Set up a computer-to-computer (ad hoc) network
  Solve problems, find wireless networks

  Hope this information is useful.

• Calculation of the value of ready for a custom time period

  Hello

  article (*) and some other sites describe how to calculate the percentage value of the ready time for the periods of time given (in real time, (day, week, month and year).

  States KB:

  There is a shortcut, you can use the following formulas for the intervals to update chart by default to get the loan % CPU:

  • Real-time: value of summons processor / 200
  • Last day: value of summons UC / 3000
  • Last week: value of summons UC / 18000
  • Last month: value of summons UC / 72000
  • Last year: value of UC summons / 864000

  But it is also possible to obtain the divisor for a custom time period?

  for example if I choose the period of 14.10.2013 - 14.10.2013 08:00 - 10.00. The period is 2 hours. But what is the divisor and how to calculate it for other periods?

  Any help would be greatly appreciated,

  Chris

  (*) VMware KB: conversion between the summation of values CPU and CPU ready %

  It depends on what adjustments to custom value data.

  for example. If the custom vale was spent time maintaining real so in your example it is 2 hours and then he gets back in the daily data, it would be in 5 min data points.

  same goes if my custom value went for 2 days, it will be so in the past set of data of the week etc. It does not display some of them in every week and then some in every day.

  BTW, the numbers you cited have an extra 0 on the end of each

  See you soon

• How gemfire locator can be configured to return the full DNS name for the customer?

  We have an index running before 2 cache servers,

  Locator.DomainA == > Server1.DomainA, Server2.DomainA.

  the problem is when the customer (customer. DomainB) try to access gemfire via locator, it up ' get: not connected to GemFire' exception, the reason is that the Client.DomainB uses the full name "Locator.DomainA" to access the gemfire, the Locator maintains only the servers host name, when the client runs the query, it access Server1 or Server2, but in this case, the networking is not connected.

  How gemfire locator can be configured to return the full DNS name for the customer?

  in gemfire.properties, Locator attribute is full domain name already.

  Thank you

  Yao

  There is a parameter for hostname for the customers that you can put in your cache.xml file cache-server element. It is a string that is passed the server for the location, and then on the Locator for the customer. You must set this client-to-host name in each of your cache servers.

• How can I configure my classic workspace, there is no option for this in the menu dropdown.

  I am trying to affect my page of the classic workspace layout, but there is no option for this in the drop down list at the top. I am trying to create an ap div, but it seems that the only way to access the ap div drawing tool is by accessing it through the insert/common/ap div. BUT I CANT GET TO IT!

  The APDiv option is not part of the program since the past 4 or 5 versions.

  To add position: absolute to an item, you must use CSS designer, or manually add the code in your CSS file or

• ORA-02248: invalid option for ALTER SESSION during the connection of the customer

  Hello
  I'm a junior dba and I was hoping if someone could help me with a problem I have. I recently installed on the oracle 10g client on my windows machine. I am trying to remote connect to my database on a unix machine, but I get error trying to connect from the client below.
  
  ERROR:
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-02248: invalid option for ALTER SESSION
  
  I did some searching on that and I think it might be something to do with the NLS_LANG setting maybe. I do not know if and to be honest, I'm a little lost on this.
  
  Any help would be greatly appreciated. See you soon.
  
  RGS,
  Rob

  Hello

  what the SQL you gave?

  Check the run-> regedit NLS_LANG parameter and change it according to env

• not enough options for the SSD drives?

  I intend to buy a desktop XPS 8700 special edition. I am disappointed that it doesn't give options for this model - for hard drives, only "2 TB 7200 RPM SATA Hard Drive 6.0 Gb/s + 256 GB SSD"-which is obviously a good combination, but for me, I think that a smaller SSD drive would be nice. "" Otherwise, I like the rest of the system. A friend who built his own PC says it has installed an SSD of 128 G and it is sufficiently large with Win8, MS Office, Photoshop and other large programs installed.

  So it of just a comment, is not a problem, but I hope that Dell would offer more options, including a drive to 3 or 4. A Dell technician suggested going to road work stations - but when I looked there, I was a little confused on the readers - workstations all seem to have several readers, probably for Raid configurations, which is something over my head and on my needs.

  Or is it a good idea to have a lot of free space on the SSD drive?

  Hi Hellogoodby,

  Thanks for your comments. It isn't that much of a difference in cost between the 128 GB and 256 GB SSD. Dell is probably buying in bulk from the right and customer demand now, most people want 256 GB or more. You are absolutely right that 128 GB is plenty for the OS and applications. I have a 250 GB Samsung Evo and have used less than 50 GB for the operating system, office and all my other apps.

• How to get custom values of the vCenter

  Hi guys

  I need an idea!

  I have for my follow-up to get personalized information about vCenter environment, but are of this info are not in the default CR.

  If my client is a server linux with vSphereCLI installed and the server a W2k8 installed vCenter 4.1.

  My idea was to define a custom on the server vCenter Server attribute and fill it with my technical information.

  Y at - it an option to query this custom value of vCenter, via the CLI from the linux server?

  lusts

  stony007_de

  NP.

  If you find this information useful, please give points to "correct" or "useful".

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware VCP3, 4

  VMware VCAP4-DCA

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Hidden view payment Options for some clients

  Hi all

  Hoping someone can help me with the hidden payment display options (cheque and cash) for some customers. I read a few threads on the topic and thus applied the following hidden fields and the script that works well to show the options for all users who are connected:

  < div id = 'hiddenfield' style = "" display: none; ">"

  < div class = "item" >

  < Input class = "PaymentMethodType" onclick = "ShowCCFields (this.value); "type ="radio"value ="2"name ="PaymentMethodType"/ >

  Check < br / >

  < Input class = "PaymentMethodType" onclick = "ShowCCFields (this.value); "type ="radio"value ="3"name ="PaymentMethodType"/ >

  Cash < / div >

  < script type = "text/javascript" >

  LoggedIn var = "{module_isloggedin}";

  If (loggedin == 1)

  document.getElementById('hiddenfield').style.display = 'inline ';

  < /script >

  However, I wanted to take it a bit further and have only the options display for a certain group of clients to connect. I played a bit with the addition of an extra and it Security Zone assigning users, but it seems that I can only limit pages of content in this way. So really you are looking for a means to limit only masked the a page of the joint fund payment options.

  Any help with this would be greatly appreciated.

  Thank you

  Kennedy

  Hello

  You can use this article for a custom field for each user the list: http://forums.adobe.com/thread/980966

  If this custom field contains a (specific) value, then you will see the options.

  Kind regards

  Alex